A vulnerability in the boot logic of Cisco IOS XE Software could allow an authenticated, local attacker with level 15 privileges or an unauthenticated attacker with physical access to execute arbitrary code on the underlying Linux operating system of an affected device. This vulnerability is due to incorrect validations of specific function arguments that are passed to the boot script. An attacker could exploit this vulnerability by tampering with a specific file, which an affected device would process during the initial boot process. On systems that are protected by the Unified Extensible Firmware Interface (UEFI) secure boot feature, a successful exploit could allow the attacker to execute unsigned code at boot time and bypass the image verification check in the secure boot process of the affected device.

A vulnerability in the internal message processing of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, local attacker to run arbitrary commands with root privileges on the underlying operating system (OS). This vulnerability exists because an internal messaging service does not properly sanitize input. An attacker could exploit this vulnerability by first authenticating to the device and then sending a crafted request to the internal service. A successful exploit could allow the attacker to run arbitrary commands with root privileges on the underlying OS. To exploit this vulnerability, the attacker must have valid Administrator credentials for the device.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Nexus Dashboard could allow an authenticated, local attacker to elevate privileges on an affected device. These vulnerabilities are due to insufficient input validation during CLI command execution on an affected device. An attacker could exploit these vulnerabilities by authenticating as the rescue-user and executing vulnerable CLI commands using a malicious payload. A successful exploit could allow the attacker to elevate privileges to root on an affected device.

Multiple vulnerabilities in Cisco Nexus Dashboard could allow an authenticated, local attacker to elevate privileges on an affected device. These vulnerabilities are due to insufficient input validation during CLI command execution on an affected device. An attacker could exploit these vulnerabilities by authenticating as the rescue-user and executing vulnerable CLI commands using a malicious payload. A successful exploit could allow the attacker to elevate privileges to root on an affected device.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software and Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root. This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco FTD Software could allow an authenticated, local attacker with administrative privileges to execute arbitrary commands with root privileges on the underlying operating system of an affected device.  This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute commands with root privileges on the underlying operating system. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

Multiple vulnerabilities in image verification checks of Cisco Network Convergence System (NCS) 540 Series Routers, only when running Cisco IOS XR NCS540L software images, and Cisco IOS XR Software for Cisco 8000 Series Routers could allow an authenticated, local attacker to execute arbitrary code on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to gain access to the underlying root shell of an affected device and execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the shared library loading mechanism of Cisco AnyConnect Secure Mobility Client for Linux and Mac OS could allow an authenticated, local attacker to perform a shared library hijacking attack on an affected device if the VPN Posture (HostScan) Module is installed on the AnyConnect client. This vulnerability is due to a race condition in the signature verification process for shared library files that are loaded on an affected device. An attacker could exploit this vulnerability by sending a series of crafted interprocess communication (IPC) messages to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected device with root privileges. To exploit this vulnerability, the attacker must have a valid account on the system.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software and Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges on an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input in the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system. An attacker would need valid user credentials to exploit this vulnerability.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in a specific CLI command that is run on Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to overwrite arbitrary files in the configuration database of an affected device. This vulnerability is due to insufficient validation of specific CLI command parameters. An attacker could exploit this vulnerability by issuing that command with specific parameters. A successful exploit could allow the attacker to overwrite the content of the configuration database and gain root-level access to an affected device.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to gain access to the underlying root shell of an affected device and execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root-level privileges on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root-level privileges.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root-level privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root-level privileges.

A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exists because the affected software does not properly sanitize user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying certain CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, which could result in a complete system compromise.

Cisco NX-OS 7.0(1)N1(1), 7.0(1)N1(3), and 7.0(4)N1(1) on Nexus 2000 Fabric Extender devices has a blank root password, which allows local users to gain privileges via unspecified vectors, aka Bug ID CSCur22079.

Cisco TelePresence Video Communication Server (VCS) Expressway X8.5.1 and X8.5.2 allows local users to write to arbitrary files via an unspecified symlink attack, aka Bug ID CSCuv11969.

The TCL interpreter in Cisco IOS 15.2 does not properly maintain the vty state, which allows local users to gain privileges by starting a session very soon after a TCL script execution, aka Bug ID CSCuq24202.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

Cisco Mobility Services Engine (MSE) through 8.0.120.7 uses weak permissions for unspecified binary files, which allows local users to obtain root privileges by writing to a file, aka Bug ID CSCuv40504.

A vulnerability in the user account management system of Cisco AsyncOS for Cisco Content Security Management Appliance (SMA) could allow an authenticated, local attacker to elevate their privileges to root. This vulnerability is due to a procedural flaw in the password generation algorithm. An attacker could exploit this vulnerability by enabling specific Administrator-only features and connecting to the appliance through the CLI with elevated privileges. A successful exploit could allow the attacker to execute arbitrary commands as root and access the underlying operating system. To exploit this vulnerability, the attacker must have valid Administrator credentials.

A vulnerability in the loading mechanism of specific DLLs of Cisco Advanced Malware Protection (AMP) for Endpoints for Windows and Immunet for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack. To exploit this vulnerability, the attacker would need valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory search paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file on the targeted system. This file will execute when the vulnerable application launches. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with SYSTEM privileges.

A vulnerability in the dragonite debugger of Cisco IOS XE Software could allow an authenticated, local attacker to escalate from privilege level 15 to root privilege. The vulnerability is due to the presence of development testing and verification scripts that remained on the device. An attacker could exploit this vulnerability by bypassing the consent token mechanism with the residual scripts on the affected device. A successful exploit could allow the attacker to escalate from privilege level 15 to root privilege.

A vulnerability in the iPXE boot function of Cisco IOS XR software could allow an authenticated, local attacker to install an unverified software image on an affected device. This vulnerability is due to insufficient image verification. An attacker could exploit this vulnerability by manipulating the boot parameters for image verification during the iPXE boot process on an affected device. A successful exploit could allow the attacker to boot an unverified software image on the affected device.

A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to elevate privileges on an affected system. To exploit this vulnerability, an attacker would need to have a valid Administrator account on an affected system. The vulnerability is due to incorrect privilege assignment. An attacker could exploit this vulnerability by logging in to an affected system with an Administrator account and creating a malicious file, which the system would parse at a later time. A successful exploit could allow the attacker to obtain root privileges on the affected system.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. These vulnerabilities are due to insufficient restrictions during the execution of affected CLI commands. An attacker could exploit these vulnerabilities by leveraging the insufficient restrictions during execution of these commands. A successful exploit could allow the attacker to elevate privileges from dnasadmin and execute arbitrary commands on the underlying operating system as root.

A vulnerability in the CLI of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input for specific commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges. To exploit this vulnerability, an attacker must have valid administrator-level credentials.

A vulnerability in the application CLI of Cisco Prime Infrastructure and Cisco Evolved Programmable Network Manager could allow an authenticated, local attacker to gain escalated privileges. This vulnerability is due to improper processing of command line arguments to application scripts. An attacker could exploit this vulnerability by issuing a command on the CLI with malicious options. A successful exploit could allow the attacker to gain the escalated privileges of the root user on the underlying operating system.

A vulnerability in ConfD could allow an authenticated, local attacker to execute arbitrary commands at the level of the account under which ConfD is running, which is commonly root. To exploit this vulnerability, an attacker must have a valid account on an affected device. The vulnerability exists because the affected software incorrectly runs the SFTP user service at the privilege level of the account that was running when the ConfD built-in Secure Shell (SSH) server for CLI was enabled. If the ConfD built-in SSH server was not enabled, the device is not affected by this vulnerability. An attacker with low-level privileges could exploit this vulnerability by authenticating to an affected device and issuing a series of commands at the SFTP interface. A successful exploit could allow the attacker to elevate privileges to the level of the account under which ConfD is running, which is commonly root. Note: Any user who can authenticate to the built-in SSH server may exploit this vulnerability. By default, all ConfD users have this access if the server is enabled. Software updates that address this vulnerability have been released.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. These vulnerabilities are due to insufficient restrictions during the execution of affected CLI commands. An attacker could exploit these vulnerabilities by leveraging the insufficient restrictions during execution of these commands. A successful exploit could allow the attacker to elevate privileges from dnasadmin and execute arbitrary commands on the underlying operating system as root.

A vulnerability in Cisco Webex Meetings Desktop App for Windows, Cisco Webex Meetings Server, Cisco Webex Network Recording Player for Windows, and Cisco Webex Teams for Windows could allow an authenticated, local attacker to perform a DLL injection attack on an affected device. To exploit this vulnerability, the attacker must have valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory paths at run time. An attacker could exploit this vulnerability by inserting a configuration file in a specific path in the system, which can cause a malicious DLL file to be loaded when the application starts. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of another user account.

A vulnerability in the upgrade process of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to inject commands that could be executed with root privileges on the underlying operating system (OS). This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by uploading a crafted upgrade package file to an affected device. A successful exploit could allow the attacker to inject commands that could be executed with root privileges on the underlying OS.

A vulnerability in Cisco Packet Tracer for Windows could allow an authenticated, local attacker to perform a DLL injection attack on an affected device. To exploit this vulnerability, the attacker must have valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory paths at run time. An attacker could exploit this vulnerability by inserting a configuration file in a specific path on the system, which can cause a malicious DLL file to be loaded when the application starts. A successful exploit could allow an attacker with normal user privileges to execute arbitrary code on the affected system with the privileges of another user’s account.

Multiple vulnerabilities in specific Cisco Identity Services Engine (ISE) CLI commands could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid Administrator privileges on the affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.

The process-management implementation in Cisco TelePresence Video Communication Server (VCS) Expressway X8.5.2 allows local users to gain privileges by terminating a firestarter.py supervised process and then triggering the restart of a process by the root account, aka Bug ID CSCuv12272.

A vulnerability in Cisco CX Cloud Agent of could allow an authenticated, local attacker to elevate their privileges. This vulnerability is due to insecure file permissions. An attacker could exploit this vulnerability by calling the script with sudo. A successful exploit could allow the attacker to take complete control of the affected device.

Multiple vulnerabilities in the restricted shell of Cisco Evolved Programmable Network Manager (EPNM), Cisco Identity Services Engine (ISE), and Cisco Prime Infrastructure could allow an authenticated, local attacker to escape the restricted shell and gain root privileges on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Cisco access points (AP) software could allow an authenticated, local attacker to inject arbitrary commands and execute them with root privileges. This vulnerability is due to improper input validation of commands that are issued from a wireless controller to an AP. An attacker with Administrator access to the CLI of the controller could exploit this vulnerability by issuing a command with crafted arguments. A successful exploit could allow the attacker to gain full root access on the AP.

A vulnerability in a specific Cisco ISE CLI command could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.