A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of an affected device. The vulnerability is due to insufficient input validation during CAPWAP packet processing. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device, resulting in a buffer over-read. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

A vulnerability in the data plane microcode of Lightspeed-Plus line cards for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the line card to reset. This vulnerability is due to the incorrect handling of malformed packets that are received on the Lightspeed-Plus line cards. An attacker could exploit this vulnerability by sending a crafted IPv4 or IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the Lightspeed-Plus line card to reset, resulting in a denial of service (DoS) condition for any traffic that traverses that line card.

A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incomplete input validation of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending a malicious OSPFv3 link-state advertisement (LSA) to an affected device. A successful exploit could allow the attacker to cause the OSPFv3 process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The OSPFv3 feature is disabled by default. To exploit this vulnerability, an attacker must be able to establish a full OSPFv3 neighbor state with an affected device. For more information about exploitation conditions, see the Details section of this advisory.

A vulnerability in the MPLS Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation when an affected device is processing an MPLS echo-request or echo-reply packet. An attacker could exploit this vulnerability by sending malicious MPLS echo-request or echo-reply packets to an interface that is enabled for MPLS forwarding on the affected device. A successful exploit could allow the attacker to cause the MPLS OAM process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition.

Cisco IOS 15.0 through 15.5 and IOS XE 3.3 through 3.16 allow remote attackers to cause a denial of service (device reload) via a crafted DHCPv6 Relay message, aka Bug ID CSCus55821.

Cisco Unified Communications Manager (CUCM) with software 6.x and 7.x before 7.1(5b)su5, 8.0 before 8.0(3a)su3, and 8.5 and 8.6 before 8.6(2a)su1 and Cisco Business Edition 3000 with software before 8.6.3 and 5000 and 6000 with software before 8.6(2a)su1 allow remote attackers to cause a denial of service (device reload) via a crafted SCCP registration, aka Bug ID CSCtu73538.

Unspecified vulnerability in the RTSP inspection feature on the Cisco Application Control Engine (ACE) Module with software before A2(3.2) for Catalyst 6500 series switches and 7600 series routers, and the Cisco Application Control Engine (ACE) 4710 appliance with software before A3(2.6), allows remote attackers to cause a denial of service (device reload) via crafted RTSP packets over TCP, aka Bug IDs CSCta85227 and CSCtg14858.

The web GUI on Cisco Small Business 500 devices 1.2.0.92 allows remote attackers to cause a denial of service via a crafted HTTP request, aka Bug ID CSCul65330.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.1, Cisco IOS XE 2.5.x and 2.6.x before 2.6.1, and Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 6.x before 6.1(5)SU1, 7.x before 7.1(5), and 8.0 before 8.0(2) allow remote attackers to cause a denial of service (device reload or voice-services outage) via crafted SIP registration traffic over UDP, aka Bug IDs CSCtf72678 and CSCtf14987.

Unspecified vulnerability in the SunRPC inspection feature on the Cisco Firewall Services Module (FWSM) with software 3.1 before 3.1(17.2), 3.2 before 3.2(16.1), 4.0 before 4.0(10.1), and 4.1 before 4.1(1.1) for Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via crafted SunRPC messages, aka Bug ID CSCte61710.

Unspecified vulnerability in the SunRPC inspection feature on the Cisco Firewall Services Module (FWSM) with software 3.1 before 3.1(17.2), 3.2 before 3.2(16.1), 4.0 before 4.0(10.1), and 4.1 before 4.1(1.1) for Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via crafted SunRPC messages, aka Bug ID CSCte61662.

Cisco AsyncOS 8.0 before 8.0.6-119 on Web Security Appliance (WSA) devices allows remote attackers to cause a denial of service (proxy-process hang) via a crafted HTTP POST request, aka Bug ID CSCuo12171.

The SendCombinedStatusInfo implementation in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 7.0SU before 7.0(2a)SU3, 7.1 before 7.1(5), and 8.0 before 8.0(3) allows remote attackers to cause a denial of service (process failure) via a malformed SIP REGISTER message, aka Bug ID CSCtf66305.

Cisco IOS 15.1(2)T allows remote attackers to cause a denial of service (resource consumption and TCP outage) via spoofed TCP packets, related to embryonic TCP connections that remain in the SYN_RCVD or SYN_SENT state, aka Bug ID CSCti18193.

Unspecified vulnerability in the NAT for SIP implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1 allows remote attackers to cause a denial of service (device reload) via transit traffic on UDP port 5060, aka Bug ID CSCtf17624.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.1, Cisco IOS XE 2.5.x and 2.6.x before 2.6.1, and Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 6.x before 6.1(5), 7.0 before 7.0(2a)su3, 7.1su before 7.1(3b)su2, 7.1 before 7.1(5), and 8.0 before 8.0(1) allow remote attackers to cause a denial of service (device reload or voice-services outage) via a SIP REFER request with an invalid Refer-To header, aka Bug IDs CSCta20040 and CSCta31358.

Unspecified vulnerability in the SIP inspection feature on the Cisco Application Control Engine (ACE) Module with software A2(1.x) before A2(1.6), A2(2.x) before A2(2.3), and A2(3.x) before A2(3.1) for Catalyst 6500 series switches and 7600 series routers, and the Cisco Application Control Engine (ACE) 4710 appliance with software before A3(2.4), allows remote attackers to cause a denial of service (device reload) via crafted SIP packets over (1) TCP or (2) UDP, aka Bug IDs CSCta65603 and CSCta71569.

Cisco Unified Presence before 8.5(4) does not properly detect recursion during entity expansion, which allows remote attackers to cause a denial of service (memory and CPU consumption, and process crash) via a crafted XML document containing a large number of nested entity references, aka Bug IDs CSCtq89842 and CSCtq88547, a similar issue to CVE-2003-1564.

Unspecified vulnerability on the Cisco Application Control Engine (ACE) Module with software A2(1.x) before A2(1.6), A2(2.x) before A2(2.3), and A2(3.x) before A2(3.1) for Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via a sequence of SSL packets, aka Bug ID CSCta20756.

The SIPStationInit implementation in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 6.1SU before 6.1(5)SU1, 7.0SU before 7.0(2a)SU3, 7.1SU before 7.1(3b)SU2, 7.1 before 7.1(5), and 8.0 before 8.0(1) allows remote attackers to cause a denial of service (process failure) via a malformed SIP message, aka Bug ID CSCtd17310.

The Locator/ID Separation Protocol (LISP) implementation in Cisco IOS 15.1 and 15.2 and NX-OS 4.1 through 6.2 allows remote attackers to cause a denial of service (device reload) via a crafted header in a packet, aka Bug ID CSCuu64279.

Unspecified vulnerability in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload or hang) by sending crafted SIP packets to TCP port 5060, aka Bug ID CSCso02147.

A vulnerability in an API endpoint of multiple Cisco Unified Communications Products could allow an unauthenticated, remote attacker to cause high CPU utilization, which could impact access to the web-based management interface and cause delays with call processing. This API is not used for device management and is unlikely to be used in normal operations of the device. This vulnerability is due to improper API authentication and incomplete validation of the API request. An attacker could exploit this vulnerability by sending a crafted HTTP request to a specific API on the device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to high CPU utilization, which could negatively impact user traffic and management access. When the attack stops, the device will recover without manual intervention.

Memory leak in Cisco IOS 15.0 through 15.1, when IPS or Zone-Based Firewall (aka ZBFW) is configured, allows remote attackers to cause a denial of service (memory consumption or device crash) via vectors that trigger many session creation flows, aka Bug ID CSCti79848.

Unspecified vulnerability in Cisco IOS XR 4.1.x before 4.1.1 on Cisco Aggregation Services Routers (ASR) 9000 series devices allows remote attackers to cause a denial of service (line-card reload) via an IPv4 packet, aka Bug ID CSCtr26695.

Unspecified vulnerability in the SunRPC inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.2 before 7.2(5), 8.0 before 8.0(5.19), 8.1 before 8.1(2.47), and 8.2 before 8.2(2) and Cisco PIX Security Appliances 500 series devices allows remote attackers to cause a denial of service (device reload) via crafted SunRPC UDP packets, aka Bug ID CSCtc85753.

The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.8(1)S5 allows remote attackers to cause a denial of service (device crash) via a malformed header, aka Bug ID CSCsz13590.

The computer telephony integration (CTI) server component in Cisco Unified Contact Center Express (UCCX) 7.0 before 7.0(1)SR4 and 7.0(2), 6.0 before 6.0(1)SR1, and 5.0 before 5.0(2)SR3 allows remote attackers to cause a denial of service (CTI server and Node Manager failure) via a malformed CTI message.

Unspecified vulnerability in the SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (TCP socket exhaustion) via unknown vectors, aka Bug ID CSCsk13561.

Cisco IOS XR 3.8.3, 3.8.4, and 3.9.1 allows remote attackers to cause a denial of service (NetIO process restart or device reload) via a crafted IPv4 packet, aka Bug ID CSCth44147.

Unspecified vulnerability in the SunRPC inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.2 before 7.2(5), 8.0 before 8.0(5.19), 8.1 before 8.1(2.47), and 8.2 before 8.2(2) and Cisco PIX Security Appliances 500 series devices allows remote attackers to cause a denial of service (device reload) via crafted SunRPC UDP packets, aka Bug ID CSCtc79922.

Unspecified vulnerability in the SunRPC inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.2 before 7.2(5), 8.0 before 8.0(5.19), 8.1 before 8.1(2.47), and 8.2 before 8.2(2) and Cisco PIX Security Appliances 500 series devices allows remote attackers to cause a denial of service (device reload) via crafted SunRPC UDP packets, aka Bug ID CSCtc77567.

The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (device crash) via a malformed Contact header, aka Bug ID CSCsj98521.

Unspecified vulnerability in the Transport Layer Security (TLS) implementation on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.2 before 7.2(5), 8.0 before 8.0(5.15), 8.1 before 8.1(2.44), 8.2 before 8.2(2.17), and 8.3 before 8.3(1.6) and Cisco PIX Security Appliances 500 series devices allows remote attackers to cause a denial of service (device reload) via a sequence of crafted TLS packets, aka Bug ID CSCtd32627.

A vulnerability in the hardware-based SSL/TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to an implementation error within the cryptographic functions for SSL/TLS traffic processing when they are offloaded to the hardware. An attacker could exploit this vulnerability by sending a crafted stream of SSL/TLS traffic to an affected device. A successful exploit could allow the attacker to cause an unexpected error in the hardware-based cryptography engine, which could cause the device to reload.

A vulnerability in ICMPv6 inspection when configured with the Snort 2 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the CPU of an affected device to spike to 100 percent, which could stop all traffic processing and result in a denial of service (DoS) condition. FTD management traffic is not affected by this vulnerability. This vulnerability is due to improper error checking when parsing fields within the ICMPv6 header. An attacker could exploit this vulnerability by sending a crafted ICMPv6 packet through an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition. Note: To recover from the DoS condition, the Snort 2 Detection Engine or the Cisco FTD device may need to be restarted.

Cisco WebEx Meetings Server 2.6 allows remote attackers to cause a denial of service (CPU consumption) by repeatedly accessing the account-validation component of an unspecified service, aka Bug ID CSCuy92704.

Cisco TelePresence Recording Server devices with software 1.6.x allow remote attackers to cause a denial of service (thread consumption and device outage) via a malformed request, related to an "ad hoc recording" issue, aka Bug ID CSCtf97205.

Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 6.x before 6.1(5), 7.x before 7.1(3b)SU2, and 8.x before 8.0(1) allows remote attackers to cause a denial of service (process failure) via a malformed SIP REG message, related to an overflow of the Telephone-URL field, aka Bug ID CSCtc62362.

Memory leak in the Data-link switching (aka DLSw) feature in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xS before 3.1.3S and 3.2.xS before 3.2.1S, when implemented over Fast Sequence Transport (FST), allows remote attackers to cause a denial of service (memory consumption and device reload or hang) via a crafted IP protocol 91 packet, aka Bug ID CSCth69364.

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.0 before 7.0(8.12), 7.1 and 7.2 before 7.2(5.2), 8.0 before 8.0(5.21), 8.1 before 8.1(2.49), 8.2 before 8.2(3.6), and 8.3 before 8.3(2.7) and Cisco PIX Security Appliances 500 series devices, when transparent firewall mode is configured but IPv6 is not configured, allow remote attackers to cause a denial of service (packet buffer exhaustion and device outage) via IPv6 traffic, aka Bug ID CSCtj04707.

Unspecified vulnerability in Cisco Wireless LAN Controller (WLC) software 3.2 before 3.2.215.0; 4.1 and 4.2 before 4.2.205.0; 4.1M and 4.2M before 4.2.207.54M; 5.0, 5.1, and 6.0 before 6.0.188.0; and 5.2 before 5.2.193.11 allows remote attackers to cause a denial of service (device reload) via a crafted IKE packet, aka Bug ID CSCta56653.

Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 6.x before 6.1(5), 7.x before 7.1(3a)su1, and 8.x before 8.0(1) allows remote attackers to cause a denial of service (process failure) via a malformed SCCP (1) RegAvailableLines or (2) FwdStatReq message with an invalid Line number, aka Bug ID CSCtc47823.

Cisco IOS 12.1 through 12.4, when Cisco Unified Communications Manager Express (CME) or Cisco Unified Survivable Remote Site Telephony (SRST) is enabled, allows remote attackers to cause a denial of service (device reload) via a malformed Skinny Client Control Protocol (SCCP) message, aka Bug ID CSCsz48614, the "SCCP Packet Processing Denial of Service Vulnerability."

The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S11 allows remote attackers to cause a denial of service (device crash) via a malformed packet, aka Bug ID CSCsk32606.

Cisco Nexus 1000V Virtual Ethernet Module (VEM) 4.0(4) SV1(1) through SV1(3b), as used in VMware ESX 4.0 and 4.1 and ESXi 4.0 and 4.1, does not properly handle dropped packets, which allows guest OS users to cause a denial of service (ESX or ESXi host OS crash) by sending an 802.1Q tagged packet over an access vEthernet port, aka Cisco Bug ID CSCtj17451.

Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.2 before 7.2(4.45), 8.0 before 8.0(4.44), 8.1 before 8.1(2.35), and 8.2 before 8.2(1.10), allows remote attackers to cause a denial of service (page fault and device reload) via a malformed DTLS message, aka Bug ID CSCtb64913 and "WebVPN DTLS Denial of Service Vulnerability."