A vulnerability in the logic that handles access control to one of the hardware components in Cisco's proprietary Secure Boot implementation could allow an authenticated, local attacker to write a modified firmware image to the component. This vulnerability affects multiple Cisco products that support hardware-based Secure Boot functionality. The vulnerability is due to an improper check on the area of code that manages on-premise updates to a Field Programmable Gate Array (FPGA) part of the Secure Boot hardware implementation. An attacker with elevated privileges and access to the underlying operating system that is running on the affected device could exploit this vulnerability by writing a modified firmware image to the FPGA. A successful exploit could either cause the device to become unusable (and require a hardware replacement) or allow tampering with the Secure Boot verification process, which under some circumstances may allow the attacker to install and boot a malicious software image. An attacker will need to fulfill all the following conditions to attempt to exploit this vulnerability: Have privileged administrative access to the device. Be able to access the underlying operating system running on the device; this can be achieved either by using a supported, documented mechanism or by exploiting another vulnerability that would provide an attacker with such access. Develop or have access to a platform-specific exploit. An attacker attempting to exploit this vulnerability across multiple affected platforms would need to research each one of those platforms and then develop a platform-specific exploit. Although the research process could be reused across different platforms, an exploit developed for a given hardware platform is unlikely to work on a different hardware platform.

A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to gain read and write access to a critical configuration file. The vulnerability is due to a failure to impose strict filesystem permissions on the targeted device. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow an attacker to use the content of this configuration file to bypass authentication and log in as any user of the device. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

A vulnerability in the hxterm service of Cisco HyperFlex Software could allow an unauthenticated, local attacker to gain root access to all nodes in the cluster. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by connecting to the hxterm service as a non-privileged, local user. A successful exploit could allow the attacker to gain root access to all member nodes of the HyperFlex cluster. This vulnerability affects Cisco HyperFlex Software Releases prior to 3.5(2a).

A vulnerability in the Cisco IOx application hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability is due to insufficient restrictions on the hosted application. An attacker could exploit this vulnerability by logging in to and then escaping the Cisco IOx application container. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco ThousandEyes Enterprise Agent, Virtual Appliance installation type, could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability is due to insufficient input validation of user-supplied CLI arguments. An attacker could exploit this vulnerability by authenticating to an affected device and using crafted commands at the prompt. A successful exploit could allow the attacker to execute arbitrary commands as root. The attacker must have valid credentials on the affected device.

A vulnerability in the shell access request mechanism of Cisco IOS XE Software could allow an authenticated, local attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by requesting access to the root shell of an affected device, after the shell access feature has been enabled. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.

A vulnerability in the configuration file protections of Cisco Virtualized Infrastructure Manager (VIM) could allow an authenticated, local attacker to access confidential information and elevate privileges on an affected device. This vulnerability is due to improper access permissions for certain configuration files. An attacker with low-privileged credentials could exploit this vulnerability by accessing an affected device and reading the affected configuration files. A successful exploit could allow the attacker to obtain internal database credentials, which the attacker could use to view and modify the contents of the database. The attacker could use this access to the database to elevate privileges on the affected device.

Cisco Virtual TelePresence Server Software does not properly restrict use of the serial port, which allows local users to execute arbitrary OS commands as root by leveraging vSphere controller administrative privileges, aka Bug ID CSCus61123.

A vulnerability in the account management subsystem of Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to elevate privileges to root. The attacker must authenticate with valid administrator credentials. The vulnerability is due to improper implementation of access controls. An attacker could exploit this vulnerability by authenticating to the device as a specific user to gain the information needed to elevate privileges to root in a separate login shell. A successful exploit could allow the attacker to escape the CLI subshell and execute system-level commands on the underlying operating system as root. Cisco Bug IDs: CSCvj93548.

A vulnerability in the support tunnel feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access the shell of an affected device even though expert mode is disabled. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by enabling the support tunnel, setting a key, and deriving the tunnel password. A successful exploit could allow the attacker to run any system command with root access on an affected device.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain escalated privileges. This vulnerability is due to improper access control on files within the affected system. A local attacker could exploit this vulnerability by modifying certain files on the vulnerable device. If successful, the attacker could gain escalated privileges and take actions on the system with the privileges of the root user.

A vulnerability in the Common Execution Environment (CEE) ConfD CLI of Cisco Ultra Cloud Core - Subscriber Microservices Infrastructure (SMI) software could allow an authenticated, local attacker to escalate privileges on an affected device. This vulnerability is due to insufficient access control in the affected CLI. An attacker could exploit this vulnerability by authenticating as a CEE ConfD CLI user and executing a specific CLI command. A successful exploit could allow an attacker to access privileged containers with root privileges.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected device if the VPN Posture (HostScan) Module is installed on the AnyConnect client. This vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges. To exploit this vulnerability, the attacker needs valid credentials on the Windows system.

A vulnerability in the CLI parser of the Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid operator-level or administrator-level credentials. Affected Products: virtual and hardware versions of Cisco Web Security Appliance (WSA). More Information: CSCvd88855. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-234.

A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. Cisco Bug IDs: CSCve48949.

A vulnerability in the CLI command-parsing code of the Cisco StarOS operating system for Cisco ASR 5000 Series 11.0 through 21.0, 5500 Series, and 5700 Series devices and Cisco Virtualized Packet Core (VPC) Software could allow an authenticated, local attacker to break from the StarOS CLI of an affected system and execute arbitrary shell commands as a Linux root user on the system, aka Command Injection. The vulnerability exists because the affected operating system does not sufficiently sanitize commands before inserting them into Linux shell commands. An attacker could exploit this vulnerability by submitting a crafted CLI command for execution in a Linux shell command as a root user. Cisco Bug IDs: CSCvc69329, CSCvc72930.

A vulnerability in the local-mgmt CLI command of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to perform a command injection attack. More Information: CSCvb61394 CSCvb86816. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.101) 92.1(1.1658) 2.0(1.115).

A vulnerability in the build procedure for certain executable system files installed at boot time on Cisco Application Policy Infrastructure Controller (APIC) devices could allow an authenticated, local attacker to gain root-level privileges. The vulnerability is due to a custom executable system file that was built to use relative search paths for libraries without properly validating the library to be loaded. An attacker could exploit this vulnerability by authenticating to the device and loading a malicious library that can escalate the privilege level. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. The attacker must have valid user credentials to log in to the device. Cisco Bug IDs: CSCvc96087. Known Affected Releases: 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1).

A vulnerability in the backup and restore functionality of Cisco FireSIGHT System Software could allow an authenticated, local attacker to execute arbitrary code on a targeted system. More Information: CSCvc91092. Known Affected Releases: 6.2.0 6.2.1.

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands on the host operating system with root privileges, aka Command Injection. More Information: CSCvb99406. Known Affected Releases: 6.2.1.BASE. Known Fixed Releases: 6.2.1.28i.BASE 6.2.1.22i.BASE 6.1.32.8i.BASE 6.1.31.3i.BASE 6.1.3.10i.BASE.

A vulnerability in the debug plug-in functionality of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to execute arbitrary commands, aka Privilege Escalation. More Information: CSCvb86725 CSCvb86797. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.105) 92.1(1.1733) 2.1(1.69).

A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying various CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, allowing complete compromise of the system.

Cisco IOS XR 6.1.1 allows local users to execute arbitrary OS commands as root by leveraging admin privileges, aka Bug ID CSCva38349.

Cisco Aironet 1800, 2800, and 3800 devices with software before 8.2.110.0, 8.2.12x before 8.2.121.0, and 8.3.x before 8.3.102.0 allow local users to gain privileges via crafted CLI parameters, aka Bug ID CSCuz24725.

Unspecified vulnerability in the VPN Client for Windows Graphical User Interface (GUI) (aka the VPN client dialer) in Cisco VPN Client for Windows 4.8.00.* and earlier, except for 4.7.00.0533, allows local authenticated, interactive users to gain privileges, possibly due to privileges of dialog boxes, aka bug ID CSCsd79265.

Cisco NX-OS allows local users to gain privileges and execute arbitrary commands via shell metacharacters in unspecified command parameters, aka Bug IDs CSCtf19827 and CSCtf27788.

Cisco Security Monitoring, Analysis and Response System (CS-MARS) before 4.1.3 has an undocumented administrative account with a default password, which allows local users to gain privileges via the expert command.

Cisco Secure Access Control Server (ACS) 3.x for Windows stores ACS administrator passwords and the master key in the registry with insecure permissions, which allows local users and remote administrators to decrypt the passwords by using Microsoft's cryptographic API functions to obtain the plaintext version of the master key.

Unspecified vulnerability in the command line processing (CLI) logic in Cisco Intrusion Prevention System 5.0(1) and 5.0(2) allows local users with OPERATOR or VIEWER privileges to gain additional privileges via unknown vectors.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root-level privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root-level privileges.

The Start Before Logon (SBL) functionality in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.3.254 on Windows, and on Windows Mobile, allows local users to gain privileges via unspecified user-interface interaction, aka Bug ID CSCta40556.

Cisco Adaptive Security Appliance (ASA) Software before 8.4(1) on ASA 5500, ASA 5500-X, PIX, and FWSM devices allows local users to gain privileges via invalid CLI commands, aka Bug ID CSCtu74257 or EPICBANANA.

Buffer overflow in the vpnclient program for UNIX VPN Client before 3.5.2 allows local users to gain administrative privileges via a long profile name in a connect argument.

Cisco Content Services (CSS) switch products 11800 and earlier, aka Arrowpoint, allows local users to gain privileges by entering debug mode.

Multiple unspecified vulnerabilities in the Command Line Interface (CLI) for Cisco Security Monitoring, Analysis and Response System (CS-MARS) before 4.2.1, allow local CS-MARS administrators to execute arbitrary commands as root.

Cisco VPN Client 5.x through 5.0.07.0440 uses weak permissions for vpnclient.ini, which allows local users to gain privileges by entering an arbitrary program name in the Command field of the ApplicationLauncher section.

The Cisco PIX/ASA Finesse Operation System 7.1 and 7.2 allows local users to gain privileges by entering characters at the enable prompt, erasing these characters via the Backspace key, and then holding down the Backspace key for one second after erasing the final character. NOTE: third parties, including one who works for the vendor, have been unable to reproduce the flaw unless the enable password is blank

A vulnerability in Cisco Umbrella Insights Virtual Appliances 2.1.0 and earlier could allow an authenticated, local attacker to log in to an affected virtual appliance with root privileges. The vulnerability is due to the presence of default, static user credentials for an affected virtual appliance. An attacker could exploit this vulnerability by using the hypervisor console to connect locally to an affected system and then using the static credentials to log in to an affected virtual appliance. A successful exploit could allow the attacker to log in to the affected appliance with root privileges. Cisco Bug IDs: CSCvg31220.

An untrusted search path (aka DLL Preloading) vulnerability in the Cisco Immunet antimalware installer could allow an authenticated, local attacker to execute arbitrary code via DLL hijacking if a local user with administrative privileges executes the installer in the current working directory where a crafted DLL has been placed by an attacker. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. An attacker would need valid user credentials to exploit this vulnerability. Cisco Bug IDs: CSCvf23928.

A vulnerability in certain system script files that are installed at boot time on Cisco Application Policy Infrastructure Controllers could allow an authenticated, local attacker to gain elevated privileges and execute arbitrary commands with root privileges on an affected host operating system. The vulnerability is due to insufficient validation of user-controlled input that is supplied to certain script files of an affected system. An attacker could exploit this vulnerability by submitting crafted input to a script file on an affected system. A successful exploit could allow the attacker to gain elevated privileges and execute arbitrary commands with root privileges on the affected system. To exploit this vulnerability, the attacker would need to authenticate to the affected system by using valid administrator credentials. Cisco Bug IDs: CSCvf57274.

A vulnerability in the debug interface of Cisco IP Phone 8800 series could allow an authenticated, local attacker to execute arbitrary commands, aka Debug Shell Command Injection. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting additional command input to the affected parameter in the debug shell. Cisco Bug IDs: CSCvf80034.