Double free vulnerability in Cisco IOS XE 3.15S, 3.16S, and 3.17S allows remote authenticated users to cause a denial of service (device restart) via a sequence of crafted SNMP read requests, aka Bug ID CSCux13174.

A vulnerability in the Simple Network Management Protocol (SNMP) service of Cisco FXOS Software for Firepower 4100 Series and Firepower 9300 Security Appliances and of Cisco UCS 6300 Series Fabric Interconnects could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to the improper handling of specific SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects all supported SNMP versions. To exploit this vulnerability through SNMPv2c or earlier, an attacker must know the SNMP community string that is configured on an affected device. To exploit this vulnerability through SNMPv3, the attacker must have valid credentials for an SNMP user who is configured on the affected device.

CallManager Express (CME) on Cisco IOS before 15.0(1)XA allows remote authenticated users to cause a denial of service (device crash) by using an extension mobility (EM) phone to interact with the menu for SNR number changes, aka Bug ID CSCta63555.

Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote authenticated users to cause a denial of service (device crash) via a high volume of IPsec traffic, aka Bug ID CSCsx52748.

Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote authenticated users to cause a denial of service (device reload) via crafted configuration commands in an HTTP request, aka Bug ID CSCux82523.

Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allows remote authenticated users to cause a denial of service (traceback) by establishing many IPsec L2L tunnels from remote peer IP addresses, aka Bug ID CSCso15583.

Cisco IOS XE 3.15S and 3.16S on cBR-8 Converged Broadband Router devices allows remote authenticated users to cause a denial of service (NULL pointer dereference and card restart) via a crafted SNMP request, aka Bug ID CSCuu68862.

Cisco Adaptive Security Appliance (ASA) Software 9.0 through 9.5.1 mishandles IPsec error processing, which allows remote authenticated users to cause a denial of service (memory consumption) via crafted (1) LAN-to-LAN or (2) Remote Access VPN tunnel packets, aka Bug ID CSCuv70576.

Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware through 1.2.1.4, RV130W devices with firmware through 1.0.2.7, and RV215W devices with firmware through 1.3.0.7 allows remote authenticated users to cause a denial of service (device reload) via a crafted HTTP request, aka Bug ID CSCux86669.

Cisco IOS before 12.2(33)SXI allows remote authenticated users to cause a denial of service (device reboot).

Cisco IOS 15.5(3)M and 15.6(1)T0a on Cisco 1000 Connected Grid routers allows remote authenticated users to cause a denial of service (device reload) via an SNMP request for unspecified BRIDGE MIB OIDs, aka Bug ID CSCux89878.

Cisco IOS 12.0 through 12.4, when IP-based tunnels and the Cisco Express Forwarding feature are enabled, allows remote attackers to cause a denial of service (device reload) via a malformed packet that is not properly handled during switching from one tunnel to a second tunnel, aka Bug IDs CSCsh97579 and CSCsq31776.

Unspecified vulnerability in the SNMPv2c implementation in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.3) and Cisco ACE 4710 Application Control Engine Appliance before A3(2.1) allows remote attackers to cause a denial of service (device reload) via a crafted SNMPv1 packet.

Unspecified vulnerability in Cisco Wireless LAN Controller (WLC) software 4.2 before 4.2.209.0; 4.2M before 4.2.207.54M; 5.0, 5.1, and 6.0 before 6.0.196.0; and 5.2 before 5.2.193.11 allows remote authenticated users to cause a denial of service (device reload) via crafted HTTP packets that trigger invalid arguments to the emweb component, aka Bug ID CSCtd16938.

A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an unexpected reload of the device. This vulnerability is due to insufficient input validation of SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device using IPv4 or IPv6. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects all versions of SNMP (versions 1, 2c, and 3) and requires a valid SNMP community string or valid SNMPv3 user credentials.

A vulnerability in the Dynamic Access Policies (DAP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an affected device to reload unexpectedly. To exploit this vulnerability, an attacker would need valid remote access VPN user credentials on the affected device. This vulnerability is due to improper validation of data in HTTPS POST requests. An attacker could exploit this vulnerability by sending a crafted HTTPS POST request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

The Supervisor 1.0.0.0 and 1.0.0.1 in Cisco Integrated Management Controller (IMC) before 2.0(9) allows remote authenticated users to cause a denial of service (IP interface outage) via crafted parameters in an HTTP request, aka Bug ID CSCuv38286.

The XML parser in the management interface in Cisco Adaptive Security Appliance (ASA) Software 8.4 allows remote authenticated users to cause a denial of service (device crash) via a crafted XML document, aka Bug ID CSCut14223.

Cisco Email Security Appliance (ESA) 8.5.6-106 and 9.6.0-042 allows remote authenticated users to cause a denial of service (file-descriptor consumption and device reload) via crafted HTTP requests, aka Bug ID CSCuw32211.

A vulnerability in the Link Layer Discovery Protocol (LLDP) message parser of Cisco IOS Software and Cisco IOS XE Software could allow an attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper initialization of a buffer. An attacker could exploit this vulnerability via any of the following methods: An authenticated, remote attacker could access the LLDP neighbor table via either the CLI or SNMP while the device is in a specific state. An unauthenticated, adjacent attacker could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then waiting for an administrator of the device or a network management system (NMS) managing the device to retrieve the LLDP neighbor table of the device via either the CLI or SNMP. An authenticated, adjacent attacker with SNMP read-only credentials or low privileges on the device CLI could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then accessing the LLDP neighbor table via either the CLI or SNMP. A successful exploit could allow the attacker to cause the affected device to crash, resulting in a reload of the device.

The SNMP implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4(7) and 8.6(1.2) allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests during a time of high network traffic, aka Bug ID CSCul02601.

Cisco IOS 15.5S and IOS XE allow remote authenticated users to cause a denial of service (device crash) by leveraging knowledge of the RADIUS secret and sending crafted RADIUS packets, aka Bug ID CSCur21348.

The RADIUS implementation in Cisco IOS and IOS XE allows remote attackers to cause a denial of service (device reload) via crafted IPv6 Attributes in Access-Accept packets, aka Bug IDs CSCur84322 and CSCur27693.

The SIP implementation in Cisco Unified Communications Manager (CM) 8.6(.2) and earlier allows remote authenticated users to cause a denial of service (process crash) via a crafted SIP message that is not properly handled during processing of an XML document, aka Bug ID CSCtq76428.

Cisco IOS allows remote authenticated users to cause a denial of service (device reload) via malformed IPsec packets, aka Bug ID CSCui79745.

The SNMP module in Cisco IOS XE 3.5E allows remote authenticated users to cause a denial of service (device reload) by polling frequently, aka Bug ID CSCug65204.

Cisco Intrusion Prevention System (IPS) Software allows remote attackers to cause a denial of service (MainApp process outage) via malformed SNMP packets, aka Bug IDs CSCum52355 and CSCul49309.

A vulnerability in the implementation of a specific CLI command and the associated Simple Network Management Protocol (SNMP) MIB for Cisco NX-OS (in standalone NX-OS mode) on Cisco Nexus 3000 and 9000 Series Switches could allow an authenticated, remote attacker to exhaust system memory on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect implementation of the CLI command, resulting in a failure to free all allocated memory upon completion. An attacker could exploit this vulnerability by authenticating to the affected device and repeatedly issuing a specific CLI command or sending a specific SNMP poll request for a specific Object Identifier (OID). A successful exploit could allow the attacker to cause the IP routing process to restart or to cause a device reset, resulting in a DoS condition. Cisco Bug IDs: CSCvf23136.

A vulnerability in the password change function of Cisco Prime Collaboration Provisioning could allow an authenticated, remote attacker to cause the system to become inoperable. The vulnerability is due to insufficient validation of a password change request. An attacker could exploit this vulnerability by changing a specific administrator account password. A successful exploit could allow the attacker to cause the affected device to become inoperable, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.2 and prior. Cisco Bug IDs: CSCvd86586.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuw99630, CSCvg71290, CSCvj67977.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem communication channel through the Cisco 550X Series Stackable Managed Switches could allow an authenticated, remote attacker to cause the device to reload unexpectedly, causing a denial of service (DoS) condition. The device nay need to be manually reloaded to recover. The vulnerability is due to lack of proper input throttling of ingress SNMP traffic over an internal interface. An attacker could exploit this vulnerability by sending a crafted, heavy stream of SNMP traffic to the targeted device. An exploit could allow the attacker to cause the device to reload unexpectedly, causing a DoS condition. Cisco Bug IDs: CSCvg22135.

The SSL VPN implementation in Cisco IOS 15.3(1)T2 and earlier allows remote authenticated users to cause a denial of service (interface queue wedge) via crafted DTLS packets in an SSL session, aka Bug IDs CSCuh97409 and CSCud90568.

The web framework on Cisco Wireless LAN Controller (WLC) devices does not properly validate configuration parameters, which allows remote authenticated users to cause a denial of service via a crafted HTTP request, aka Bug ID CSCuh81011.

The WebVPN CIFS implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0(.4.1) and earlier allows remote CIFS servers to cause a denial of service (device reload) via a long share list, aka Bug ID CSCuj83344.

A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco NX-OS on the Cisco Nexus 4000 Series Switch could allow an authenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete validation of an SNMP poll request for a specific MIB. An attacker could exploit this vulnerability by sending a specific SNMP poll request to the targeted device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvg10442.

A vulnerability in the web-based management interface of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to cause an affected system to reboot or shut down. The vulnerability is due to insufficient server-side authorization checks. An attacker who is logged in to the web-based management interface as a low-privileged user could exploit this vulnerability by sending a crafted HTTP request. A successful exploit could allow the attacker to use the low-privileged user account to reboot or shut down the affected system.

A vulnerability in the Web Admin Interface of Cisco Meeting Server could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of incoming HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the Web Admin Interface of an affected Cisco Meeting Server. A successful exploit could allow the attacker to restart the system, terminating all ongoing calls and resulting in a DoS condition on the affected product. This vulnerability affects the following releases of Cisco Meeting Server: Acano X-Series, Cisco Meeting Server 1000, Cisco Meeting Server 2000. Cisco Bug IDs: CSCvi48624.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application of an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in the administrative GUI configuration feature of Cisco Wireless LAN Controller (WLC) Software could allow an aUTHENTICated, remote attacker to cause the device to reload unexpectedly during device configuration when the administrator is using this GUI, causing a denial of service (DoS) condition on an affected device. The attacker would need to have valid administrator credentials on the device. This vulnerability is due to incomplete input validation for unexpected configuration options that the attacker could submit while accessing the GUI configuration menus. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted user input when using the administrative GUI configuration feature. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Software versions prior to 8.3.150.0, 8.5.140.0, 8.8.111.0 are affected by this vulnerability.

The file-upload feature in Cisco Identity Services Engine (ISE) allows remote authenticated users to cause a denial of service (disk consumption and administration-interface outage) by uploading many files, aka Bug ID CSCui67519.

A vulnerability in the Simple Network Management Protocol (SNMP) punt handling function of Cisco cBR-8 Converged Broadband Routers could allow an authenticated, remote attacker to overload a device punt path, resulting in a denial of service (DoS) condition. This vulnerability is due to the punt path being overwhelmed by large quantities of SNMP requests. An attacker could exploit this vulnerability by sending a large number of SNMP requests to an affected device. A successful exploit could allow the attacker to overload the device punt path, resulting in a DoS condition.

A vulnerability in filesystem usage management for Cisco Firepower Device Manager (FDM) Software could allow an authenticated, remote attacker to exhaust filesystem resources, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to the insufficient management of available filesystem resources. An attacker could exploit this vulnerability by uploading files to the device and exhausting available filesystem resources. A successful exploit could allow the attacker to cause database errors and cause the device to become unresponsive to web-based management. Manual intervention is required to free filesystem resources and return the device to an operational state.

A vulnerability in the Java Management Extensions (JMX) component of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to an unsecured TCP/IP port. An attacker could exploit this vulnerability by accessing the port and restarting the JMX process. A successful exploit could allow the attacker to cause a DoS condition on an affected system.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) support for the AutoReconnect feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to exhaust the free IP addresses from the assigned local pool. This vulnerability occurs because the code does not release the allocated IP address under certain failure conditions. An attacker could exploit this vulnerability by trying to connect to the device with a non-AnyConnect client. A successful exploit could allow the attacker to exhaust the IP addresses from the assigned local pool, which prevents users from logging in and leads to a denial of service (DoS) condition.

Multiple vulnerabilities in Cisco SD-WAN vEdge Software could allow an attacker to execute arbitrary code as the root user or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the TLS 1.3 implementation for a specific cipher for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software for Cisco Firepower 3100 and 4200 Series devices could allow an authenticated, remote attacker to consume resources that are associated with incoming TLS 1.3 connections, which eventually could cause the device to stop accepting any new SSL/TLS or VPN requests. This vulnerability is due to the implementation of the TLS 1.3 Cipher TLS_CHACHA20_POLY1305_SHA256. An attacker could exploit this vulnerability by sending a large number of TLS 1.3 connections with the specific TLS 1.3 Cipher TLS_CHACHA20_POLY1305_SHA256. A successful exploit could allow the attacker to cause a denial of service (DoS) condition where no new incoming encrypted connections are accepted. The device must be reloaded to clear this condition. Note: These incoming TLS 1.3 connections include both data traffic and user-management traffic. After the device is in the vulnerable state, no new encrypted connections can be accepted.

A vulnerability in the SNMP subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper error handling when parsing SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.  This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMP v2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMP v3, the attacker must have valid SNMP user credentials for the affected system.