A vulnerability in the implementation of the Border Gateway Protocol (BGP) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains a specific BGP attribute. An attacker could exploit this vulnerability by sending BGP update messages that include a specific, malformed attribute to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer or would need to be injected by the attacker into the victim’s BGP network on an existing, valid TCP connection to a BGP peer.
Multiple vulnerabilities in the Zone-Based Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload or stop forwarding traffic through the firewall. The vulnerabilities are due to incomplete handling of Layer 4 packets through the device. An attacker could exploit these vulnerabilities by sending a certain sequence of traffic patterns through the device. A successful exploit could allow the attacker to cause the device to reload or stop forwarding traffic through the firewall, resulting in a denial of service. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the DNS application layer gateway (ALG) functionality that is used by Network Address Translation (NAT) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a logic error that occurs when an affected device inspects certain TCP DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through the affected device that is performing NAT for DNS packets. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on the affected device. Note: This vulnerability can be exploited only by sending IPv4 TCP packets through an affected device. This vulnerability cannot be exploited by sending IPv6 traffic.
Multiple vulnerabilities in the Zone-Based Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload or stop forwarding traffic through the firewall. The vulnerabilities are due to incomplete handling of Layer 4 packets through the device. An attacker could exploit these vulnerabilities by sending a certain sequence of traffic patterns through the device. A successful exploit could allow the attacker to cause the device to reload or stop forwarding traffic through the firewall, resulting in a denial of service. For more information about these vulnerabilities, see the Details section of this advisory.
The NTP implementation in Cisco IOS 12.0 through 12.4 and 15.0 through 15.1, and IOS XE 2.1 through 3.3, does not properly handle encapsulation of multicast NTP packets within MSDP SA messages, which allows remote attackers to cause a denial of service (device reload) by leveraging an MSDP peer relationship, aka Bug ID CSCuc81226.
The PPTP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via crafted TCP port-1723 packets, aka Bug ID CSCtq14817.
A vulnerability in dynamic access policies (DAP) functionality of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to improper processing of HostScan data received from the Posture (HostScan) module. An attacker could exploit this vulnerability by sending crafted HostScan data to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU"] This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication.
A vulnerability in the DNS inspection handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to a lack of proper processing of incoming requests. An attacker could exploit this vulnerability by sending crafted DNS requests at a high rate to an affected device. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.
A vulnerability in the implementation of the Resource Public Key Infrastructure (RPKI) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the Border Gateway Protocol (BGP) process to crash, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of a specific RPKI to Router (RTR) Protocol packet header. An attacker could exploit this vulnerability by compromising the RPKI validator server and sending a specifically crafted RTR packet to an affected device. Alternatively, the attacker could use man-in-the-middle techniques to impersonate the RPKI validator server and send a crafted RTR response packet over the established RTR TCP connection to the affected device. A successful exploit could allow the attacker to cause a DoS condition because the BGP process could constantly restart and BGP routing could become unstable.
A vulnerability in the Session Initiation Protocol (SIP) on the Cisco TelePresence Video Communication Server (VCS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the targeted appliance. The vulnerability is due to excessive SIP traffic sent to the device. An attacker could exploit this vulnerability by transmitting large volumes of SIP traffic to the VCS. An exploit could allow the attacker to cause a complete DoS condition on the targeted system. Cisco Bug IDs: CSCve32897.
A vulnerability in the generic routing encapsulation (GRE) tunnel decapsulation feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a memory handling error that occurs when GRE traffic is processed. An attacker could exploit this vulnerability by sending a crafted GRE payload through an affected device. A successful exploit could allow the attacker to cause the device to restart, resulting in a DoS condition. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM"] This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication.
A vulnerability in the UDP processing code of Cisco IOS 15.1, 15.2, and 15.4 and IOS XE 3.14 through 3.18 could allow an unauthenticated, remote attacker to cause the input queue of an affected system to hold UDP packets, causing an interface queue wedge and a denial of service (DoS) condition. The vulnerability is due to Cisco IOS Software application changes that create UDP sockets and leave the sockets idle without closing them. An attacker could exploit this vulnerability by sending UDP packets with a destination port of 0 to an affected device. A successful exploit could allow the attacker to cause UDP packets to be held in the input interfaces queue, resulting in a DoS condition. The input interface queue will stop holding UDP packets when it receives 250 packets. Cisco Bug IDs: CSCup10024, CSCva55744, CSCva95506.
A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.
The auto-update implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0.3.6 and earlier allows remote attackers to cause a denial of service (device reload) via crafted update data, aka Bug ID CSCui33308.
The TCP implementation in Cisco IOS does not properly implement the transitions from the ESTABLISHED state to the CLOSED state, which allows remote attackers to cause a denial of service (flood of ACK packets) via a crafted series of ACK and FIN packets, aka Bug ID CSCtz14399.
A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892.
Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(7), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.3), and 9.1.x before 9.1(1.8), when the DNS ALPI engine is enabled for TCP, allows remote attackers to cause a denial of service (device reload) via crafted TCP DNS packets, aka Bug ID CSCug03975.
The SQL*Net inspection engine in Cisco Adaptive Security Appliance (ASA) Software 7.x before 7.2(5.12), 8.x before 8.2(5.44), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.6), 9.0.x before 9.0(2.10), and 9.1.x before 9.1(2) and Firewall Services Module (FWSM) 3.1.x and 3.2.x before 3.2(27) and 4.x before 4.1(14) allows remote attackers to cause a denial of service (device reload) via crafted segmented Transparent Network Substrate (TNS) packets, aka Bug ID CSCub98434.
A vulnerability in the implementation of Common Industrial Protocol (CIP) functionality in Cisco Industrial Ethernet 2000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to a system memory leak. More Information: CSCvc54788. Known Affected Releases: 15.2(5.4.32i)E2. Known Fixed Releases: 15.2(5.4.62i)E2.
The IPsec implementation in Cisco Adaptive Security Appliance (ASA) Software 9.1 before 9.1(1.7), when an IPsec VPN tunnel is enabled, allows remote attackers to cause a denial of service (device reload) via a (1) ICMP or (2) ICMPv6 packet that is improperly handled during decryption, aka Bug ID CSCue18975.
A vulnerability in the Autonomic Networking Infrastructure (ANI) feature of Cisco IOS Software (15.4 through 15.6) and Cisco IOS XE Software (3.7 through 3.18, and 16) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to a device that is running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature. A device must meet two conditions to be affected by this vulnerability: (1) the device must be running a version of Cisco IOS Software or Cisco IOS XE Software that supports ANI (regardless of whether ANI is configured); and (2) the device must have a reachable IPv6 interface. An exploit could allow the attacker to cause the affected device to reload. Cisco Bug IDs: CSCvc42729.
A denial-of-service in Cisco Unified IP Conference Station 7937G 1-4-4-0 through 1-4-5-7 allows attackers restart the device remotely through sending specially crafted packets. Note: We cannot prove this vulnerability exists. Out of an abundance of caution, this CVE is being assigned to better serve our customers and ensure all who are still running this product understand that the product is end of life and should be removed or upgraded. For more information on this, and how to upgrade, refer to the CVE’s reference information
A vulnerability in the implementation of the PROFINET Discovery and Configuration Protocol (PN-DCP) for Cisco IOS 12.2 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper parsing of ingress PN-DCP Identify Request packets destined to an affected device. An attacker could exploit this vulnerability by sending a crafted PN-DCP Identify Request packet to an affected device and then continuing to send normal PN-DCP Identify Request packets to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to process PROFINET messages. Beginning with Cisco IOS Software Release 12.2(52)SE, PROFINET is enabled by default on all the base switch module and expansion-unit Ethernet ports. Cisco Bug IDs: CSCuz47179.
Cisco Adaptive Security Appliances (ASA) devices, when SMP is used, do not properly process X.509 certificates, which allows remote attackers to cause a denial of service (device crash) via a large volume of (1) SSL or (2) TLS traffic, aka Bug ID CSCuh19462.
Cisco Unified Communications Manager (Unified CM) 8.5(x) and 8.6(x) before 8.6(2a)su3 and 9.x before 9.1(1) does not properly restrict the rate of SIP packets, which allows remote attackers to cause a denial of service (memory and CPU consumption, and service disruption) via a flood of UDP packets to port 5060, aka Bug ID CSCub35869.
A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
Cisco Adaptive Security Appliances (ASA) devices with software 7.x before 7.2(5.10), 8.0 before 8.0(5.31), 8.1 and 8.2 before 8.2(5.38), 8.3 before 8.3(2.37), 8.4 before 8.4(5), 8.5 before 8.5(1.17), 8.6 before 8.6(1.10), and 8.7 before 8.7(1.3) allow remote attackers to cause a denial of service (device reload) via a crafted certificate, aka Bug ID CSCuc72408.
The RSVP protocol implementation in Cisco IOS 12.2 and 15.0 through 15.2 and IOS XE 3.1.xS through 3.4.xS before 3.4.5S and 3.5.xS through 3.7.xS before 3.7.2S, when MPLS-TE is enabled, allows remote attackers to cause a denial of service (incorrect memory access and device reload) via a traffic engineering PATH message in an RSVP packet, aka Bug ID CSCtg39957.
Cisco IOS XE 3.2 through 3.4 before 3.4.2S, and 3.5, on 1000 series Aggregation Services Routers (ASR), when bridge domain interface (BDI) is enabled, allows remote attackers to cause a denial of service (card reload) via packets that are not properly handled during the processing of encapsulation, aka Bug ID CSCtt11558.
Multiple Cisco products are affected by a vulnerability in Snort rules that could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.The vulnerability is due to improper handling of the Block with Reset or Interactive Block with Reset actions if a rule is configured without proper constraints. An attacker could exploit this vulnerability by sending a crafted IP packet to the affected device. A successful exploit could allow the attacker to cause through traffic to be dropped. Note: Only products with Snort3 configured and either a rule with Block with Reset or Interactive Block with Reset actions configured are vulnerable. Products configured with Snort2 are not vulnerable.
The DHCP server on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 7.0 before 7.2(5.8), 7.1 before 7.2(5.8), 7.2 before 7.2(5.8), 8.0 before 8.0(5.28), 8.1 before 8.1(2.56), 8.2 before 8.2(5.27), 8.3 before 8.3(2.31), 8.4 before 8.4(3.10), 8.5 before 8.5(1.9), and 8.6 before 8.6(1.5) does not properly allocate memory for DHCP packets, which allows remote attackers to cause a denial of service (device reload) via a series of crafted IPv4 packets, aka Bug ID CSCtw84068.
The AAA functionality in the IPv4 SSL VPN implementations on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.2 before 8.2(5.30) and 8.3 before 8.3(2.34) allows remote attackers to cause a denial of service (device reload) via a crafted authentication response, aka Bug ID CSCtz04566.
Cisco IOS XE 03.02.00.XO.15.0(2)XO on Catalyst 4500E series switches, when a Supervisor Engine 7L-E card is installed, allows remote attackers to cause a denial of service (card reload) via malformed packets that trigger uncorrected ECC error messages, aka Bug ID CSCty88456.
The DCERPC inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.13) and the Firewall Services Module (FWSM) 4.1 before 4.1(7) in Cisco Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via a crafted DCERPC packet, aka Bug IDs CSCtr21346 and CSCtr27521.
The BGP implementation in Cisco IOS 15.2, IOS XE 3.5.xS before 3.5.2S, and IOS XR 4.1.0 through 4.2.2 allows remote attackers to cause a denial of service (multiple connection resets) by leveraging a peer relationship and sending a malformed attribute, aka Bug IDs CSCtt35379, CSCty58300, CSCtz63248, and CSCtz62914.
Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 allows remote attackers to cause a denial of service (device crash) by pinging a virtual interface, aka Bug ID CSCte55370.
Unspecified vulnerability in Stack Group Bidding Protocol (SGBP) support in Cisco IOS 12.0 through 12.4 running on various Cisco products, when SGBP is enabled, allows remote attackers on the local network to cause a denial of service (device hang and network traffic loss) via a crafted UDP packet to port 9900.
Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709.
A vulnerability in the Akamai Connect feature of Cisco Wide Area Application Services (WAAS) Appliances could allow an unauthenticated, remote attacker to cause a denial-of-service (DoS) condition on an affected device. The vulnerability is due to certain file-handling inefficiencies of the affected system. An attacker could exploit this vulnerability by directing client systems to access a corrupted file that the client systems cannot decompress correctly. A successful exploit could allow the attacker to cause the affected device to crash or hang unexpectedly and result in a DoS condition that may require manual intervention to regain normal operating conditions. Cisco Bug IDs: CSCve82472.
Race condition in the Zone-Based Firewall in Cisco IOS 15.1 and 15.2, when IPS policies are configured, allows remote attackers to cause a denial of service (device crash) by sending IPv6 packets, aka Bug ID CSCtk53534.
The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.
A vulnerability in the proxy service of Cisco AsyncOS for Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper memory management in the proxy service of an affected device. An attacker could exploit this vulnerability by establishing a large number of HTTPS connections to the affected device. A successful exploit could allow the attacker to cause the system to stop processing new connections, which could result in a DoS condition. Note: Manual intervention may be required to recover from this situation.
A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.
A vulnerability in the processing of SSH connections for multi-instance deployments of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to a lack of proper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, which causes a DoS condition on the affected device. The device must be manually reloaded to recover.
A vulnerability in the memory management of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when connection rates are high. An attacker could exploit this vulnerability by opening a significant number of connections on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Secure Shell (SSH) 2 in Cisco IOS 12.0 through 12.3 allows remote attackers to cause a denial of service (device reload) (1) via a username that contains a domain name when using a TACACS+ server to authenticate, (2) when a new SSH session is in the login phase and a currently logged in user issues a send command, or (3) when IOS is logging messages and an SSH session is terminated while the server is sending data.
The IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS through 3.4.xS before 3.4.2S, 3.5.xS before 3.5.1S, and 3.2.xSG before 3.2.2SG allows remote attackers to cause a denial of service (device reload) by sending IKE UDP packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCts38429.
Cisco Unified Presence before 8.5(4) does not properly detect recursion during entity expansion, which allows remote attackers to cause a denial of service (memory and CPU consumption, and process crash) via a crafted XML document containing a large number of nested entity references, aka Bug IDs CSCtq89842 and CSCtq88547, a similar issue to CVE-2003-1564.
The SIP process in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 7.x before 7.1(5b)su4 and 8.x before 8.0(1) does not properly handle SDP data within a SIP call in certain situations related to use of the g729ar8 codec for a Media Termination Point (MTP), which allows remote attackers to cause a denial of service (service outage) via a crafted call, aka Bug ID CSCtc61990.
Memory leak in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 6.x before 6.1(5)su3, 7.x before 7.1(5b)su3, 8.0 before 8.0(3a)su2, and 8.5 before 8.5(1) allows remote attackers to cause a denial of service (memory consumption and process failure) via a malformed SIP message, aka Bug ID CSCti42904.