A vulnerability in the configuration of the Pluggable Authentication Module (PAM) used in Cisco Firepower Threat Defense (FTD) Software, Cisco Firepower Management Center (FMC) Software, and Cisco FXOS Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper resource management in the context of user session management. An attacker could exploit this vulnerability by connecting to an affected system and performing many simultaneous successful Secure Shell (SSH) logins. A successful exploit could allow the attacker to exhaust system resources and cause the device to reload, resulting in a DoS condition. To exploit this vulnerability, the attacker needs valid user credentials on the system.

A vulnerability in the web-based management interface of Cisco IC3000 Industrial Compute Gateway could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software improperly manages system resources. An attacker could exploit this vulnerability by opening a large number of simultaneous sessions on the web-based management interface of an affected device. A successful exploit could allow the attacker to cause a DoS condition of the web-based management interface, preventing normal management operations.

A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.

A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to consume excessive system memory and cause a denial of service (DoS) condition on an affected system. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a large number of crafted HTTP requests to the affected web-based management interface. A successful exploit could allow the attacker to exhaust system memory, which could cause the system to stop processing new connections and could result in a DoS condition.

A vulnerability in the implementation of a specific CLI command and the associated Simple Network Management Protocol (SNMP) MIB for Cisco NX-OS (in standalone NX-OS mode) on Cisco Nexus 3000 and 9000 Series Switches could allow an authenticated, remote attacker to exhaust system memory on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect implementation of the CLI command, resulting in a failure to free all allocated memory upon completion. An attacker could exploit this vulnerability by authenticating to the affected device and repeatedly issuing a specific CLI command or sending a specific SNMP poll request for a specific Object Identifier (OID). A successful exploit could allow the attacker to cause the IP routing process to restart or to cause a device reset, resulting in a DoS condition. Cisco Bug IDs: CSCvf23136.

A vulnerability in the REST API of Cisco Managed Services Accelerator (MSX) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the way that the affected software logs certain API requests. An attacker could exploit this vulnerability by sending a flood of crafted API requests to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

A vulnerability in the Cisco Webex Teams client for Windows could allow an authenticated, remote attacker to cause the client to crash, resulting in a denial of service (DoS) condition. The attacker needs a valid developer account to exploit this vulnerability. The vulnerability is due to insufficient input validation when processing received adaptive cards. The attacker could exploit this vulnerability by sending an adaptive card with malicious content to an existing user of the Cisco Webex Teams client for Windows. A successful exploit could allow the attacker to cause the targeted user's client to crash continuously. This vulnerability was introduced in Cisco Webex Teams client for Windows Release 3.0.13131.

A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incorrect handling of multiple simultaneous device registrations on Cisco SSM On-Prem. An attacker could exploit this vulnerability by sending multiple device registration requests to Cisco SSM On-Prem. A successful exploit could allow the attacker to cause a DoS condition on an affected device.

A vulnerability in the NETCONF over SSH feature of Cisco IOS XE Software could allow a low-privileged, authenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to insufficient resource management. An attacker could exploit this vulnerability by initiating a large number of NETCONF over SSH connections. A successful exploit could allow the attacker to exhaust resources, causing the device to reload and resulting in a DoS condition on an affected device.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. This vulnerability is due to improper control of a resource. An attacker with the ability to spoof a trusted IKEv2 site-to-site VPN peer and in possession of valid IKEv2 credentials for that peer could exploit this vulnerability by sending malformed, authenticated IKEv2 messages to an affected device. A successful exploit could allow the attacker to trigger a reload of the device.

The XML parser in the management interface in Cisco Adaptive Security Appliance (ASA) Software 8.4 allows remote authenticated users to cause a denial of service (device crash) via a crafted XML document, aka Bug ID CSCut14223.

The Supervisor 1.0.0.0 and 1.0.0.1 in Cisco Integrated Management Controller (IMC) before 2.0(9) allows remote authenticated users to cause a denial of service (IP interface outage) via crafted parameters in an HTTP request, aka Bug ID CSCuv38286.

Cisco Email Security Appliance (ESA) 8.5.6-106 and 9.6.0-042 allows remote authenticated users to cause a denial of service (file-descriptor consumption and device reload) via crafted HTTP requests, aka Bug ID CSCuw32211.

A vulnerability in the Secure Sockets Layer (SSL) VPN feature of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition that prevents the creation of new SSL/Transport Layer Security (TLS) connections to an affected device. The vulnerability is due to incorrect handling of Base64-encoded strings. An attacker could exploit this vulnerability by opening many SSL VPN sessions to an affected device. The attacker would need to have valid user credentials on the affected device to exploit this vulnerability. A successful exploit could allow the attacker to overwrite a special system memory location, which will eventually result in memory allocation errors for new SSL/TLS sessions to the device, preventing successful establishment of these sessions. A reload of the device is required to recover from this condition. Established SSL/TLS connections to the device and SSL/TLS connections through the device are not affected. Note: Although this vulnerability is in the SSL VPN feature, successful exploitation of this vulnerability would affect all new SSL/TLS sessions to the device, including management sessions.

Cisco Adaptive Security Appliance (ASA) Software 9.0 through 9.5.1 mishandles IPsec error processing, which allows remote authenticated users to cause a denial of service (memory consumption) via crafted (1) LAN-to-LAN or (2) Remote Access VPN tunnel packets, aka Bug ID CSCuv70576.

Cisco IOS 15.5(3)M and 15.6(1)T0a on Cisco 1000 Connected Grid routers allows remote authenticated users to cause a denial of service (device reload) via an SNMP request for unspecified BRIDGE MIB OIDs, aka Bug ID CSCux89878.

The web administration interface on Cisco Wireless LAN Controller (WLC) devices before 7.0.241, 7.1.x through 7.4.x before 7.4.122, and 7.5.x and 7.6.x before 7.6.120 allows remote authenticated users to cause a denial of service (device crash) via unspecified parameters, aka Bug IDs CSCum65159 and CSCum65252.

Cisco IOS 15.5S and IOS XE allow remote authenticated users to cause a denial of service (device crash) by leveraging knowledge of the RADIUS secret and sending crafted RADIUS packets, aka Bug ID CSCur21348.

The SIP implementation in Cisco Unified Communications Manager (CM) 8.6(.2) and earlier allows remote authenticated users to cause a denial of service (process crash) via a crafted SIP message that is not properly handled during processing of an XML document, aka Bug ID CSCtq76428.

Cisco IOS allows remote authenticated users to cause a denial of service (device reload) via malformed IPsec packets, aka Bug ID CSCui79745.

Cisco Intrusion Prevention System (IPS) Software allows remote attackers to cause a denial of service (MainApp process outage) via malformed SNMP packets, aka Bug IDs CSCum52355 and CSCul49309.

The server in Cisco Unity Connection allows remote authenticated users to cause a denial of service (CPU consumption) via unspecified IMAP commands, aka Bug ID CSCul49976.

The WebVPN CIFS implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0(.4.1) and earlier allows remote CIFS servers to cause a denial of service (device reload) via a long share list, aka Bug ID CSCuj83344.

The SSL VPN implementation in Cisco IOS 15.3(1)T2 and earlier allows remote authenticated users to cause a denial of service (interface queue wedge) via crafted DTLS packets in an SSL session, aka Bug IDs CSCuh97409 and CSCud90568.

The file-upload feature in Cisco Identity Services Engine (ISE) allows remote authenticated users to cause a denial of service (disk consumption and administration-interface outage) by uploading many files, aka Bug ID CSCui67519.

Cisco Unified Communications Domain Manager does not properly allocate memory for GET and POST requests, which allows remote authenticated users to cause a denial of service (memory consumption and process crash) via crafted requests to the management interface, aka Bug ID CSCud22922.

The XML parser in the server in Cisco Unified Presence (CUP) allows remote authenticated users to cause a denial of service (jabberd daemon crash) via crafted XML content in an XMPP message, aka Bug ID CSCue13912.

The generic input/output control implementation in Cisco IOS does not properly manage buffers, which allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests at the same time, aka Bug ID CSCub41105.

Cisco TelePresence System Software does not properly handle inactive t-shell sessions, which allows remote authenticated users to cause a denial of service (memory consumption and service outage) by establishing multiple SSH connections, aka Bug ID CSCug77610.

Cisco IOS before 15.2(4)S6 does not initialize an unspecified variable, which might allow remote authenticated users to cause a denial of service (CPU consumption, watchdog timeout, crash) by walking specific SNMP objects.

Cisco IOS before 15.1(1)SY1 allows remote authenticated users to cause a denial of service (device reload) by establishing a VPN session and then sending malformed IKEv2 packets, aka Bug ID CSCub39268.

Cisco IOS before 12.2(50)SY1 allows remote authenticated users to cause a denial of service (memory consumption) via a sequence of VTY management sessions (aka exec sessions), aka Bug ID CSCtn43662.

Unspecified vulnerability in Cisco IOS before 15.3(2)T on AS5400 devices allows remote authenticated users to cause a denial of service (spurious errors) via unknown vectors, aka Bug ID CSCub61009.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem communication channel through the Cisco 550X Series Stackable Managed Switches could allow an authenticated, remote attacker to cause the device to reload unexpectedly, causing a denial of service (DoS) condition. The device nay need to be manually reloaded to recover. The vulnerability is due to lack of proper input throttling of ingress SNMP traffic over an internal interface. An attacker could exploit this vulnerability by sending a crafted, heavy stream of SNMP traffic to the targeted device. An exploit could allow the attacker to cause the device to reload unexpectedly, causing a DoS condition. Cisco Bug IDs: CSCvg22135.

A vulnerability in the web-based management interface of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to cause an affected system to reboot or shut down. The vulnerability is due to insufficient server-side authorization checks. An attacker who is logged in to the web-based management interface as a low-privileged user could exploit this vulnerability by sending a crafted HTTP request. A successful exploit could allow the attacker to use the low-privileged user account to reboot or shut down the affected system.

A vulnerability in the password change function of Cisco Prime Collaboration Provisioning could allow an authenticated, remote attacker to cause the system to become inoperable. The vulnerability is due to insufficient validation of a password change request. An attacker could exploit this vulnerability by changing a specific administrator account password. A successful exploit could allow the attacker to cause the affected device to become inoperable, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.2 and prior. Cisco Bug IDs: CSCvd86586.

Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote authenticated users to cause a denial of service (device reload) via crafted configuration commands in an HTTP request, aka Bug ID CSCux82523.

A vulnerability in the Web Admin Interface of Cisco Meeting Server could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of incoming HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the Web Admin Interface of an affected Cisco Meeting Server. A successful exploit could allow the attacker to restart the system, terminating all ongoing calls and resulting in a DoS condition on the affected product. This vulnerability affects the following releases of Cisco Meeting Server: Acano X-Series, Cisco Meeting Server 1000, Cisco Meeting Server 2000. Cisco Bug IDs: CSCvi48624.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application of an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuw99630, CSCvg71290, CSCvj67977.

A vulnerability in the user management functionality of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to perform a denial of service (DoS) attack against an affected system. The vulnerability is due to insufficient validation of user-provided input. An attacker could exploit this vulnerability by logging in with a highly privileged user account and performing a sequence of specific user management operations that interfere with the underlying operating system. A successful exploit could allow the attacker to permanently degrade the functionality of the affected system.

A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco NX-OS on the Cisco Nexus 4000 Series Switch could allow an authenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete validation of an SNMP poll request for a specific MIB. An attacker could exploit this vulnerability by sending a specific SNMP poll request to the targeted device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvg10442.

Memory leak in Cisco IOS 12.2 in the Performance Routing Engine (PRE) module on uBR10000 devices allows remote authenticated users to cause a denial of service (memory consumption or PXF process crash) by sending docsIfMCmtsMib SNMP requests quickly, aka Bug ID CSCue65051.

The SNMP implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4(7) and 8.6(1.2) allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests during a time of high network traffic, aka Bug ID CSCul02601.

A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158.

A vulnerability in the Secure Shell (SSH) subsystem of Cisco Small Business Managed Switches software could allow an authenticated, remote attacker to cause a reload of the affected switch, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SSH connections. An attacker could exploit this vulnerability by logging in to an affected switch via SSH and sending a malicious SSH message. This vulnerability affects the following Cisco products when SSH is enabled: Small Business 300 Series Managed Switches, Small Business 500 Series Stackable Managed Switches, 350 Series Managed Switches, 350X Series Stackable Managed Switches, 550X Series Stackable Managed Switches, ESW2 Series Advanced Switches. Cisco Bug IDs: CSCvb48377.

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

The RADIUS implementation in Cisco IOS and IOS XE allows remote attackers to cause a denial of service (device reload) via crafted IPv6 Attributes in Access-Accept packets, aka Bug IDs CSCur84322 and CSCur27693.