A vulnerability in certain access control mechanisms for the Secure Shell (SSH) server implementation for Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to access a CLI instance on an affected device. The vulnerability is due to a lack of proper input- and validation-checking mechanisms for inbound SSH connections on an affected device. An attacker could exploit this vulnerability by attempting to establish an SSH connection to an affected controller. An exploit could allow the attacker to access an affected device's CLI to potentially cause further attacks. This vulnerability has been fixed in version 8.5(140.0).

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to discover the CM MAC address by connecting to the device's xfinitywifi hotspot.

A vulnerability in the packet processing code of Cisco IOS Software for Cisco Aironet Access Points could allow an unauthenticated, adjacent attacker to retrieve content from memory on an affected device, which could lead to the disclosure of confidential information. The vulnerability is due to insufficient condition checks that are performed by the affected device when the device adds padding to egress packets. An attacker could exploit this vulnerability by sending a crafted IP packet to an affected device. A successful exploit could allow the attacker to retrieve content from memory on the affected device, which could lead to the disclosure of confidential information. Cisco Bug IDs: CSCvc21581.

The Cisco Security Monitoring, Analysis and Response System (CS-MARS) 6.0.4 and earlier stores cleartext passwords in log/sysbacktrace.## files within error-logs.tar.gz archives, which allows context-dependent attackers to obtain sensitive information by reading these files.

A vulnerability in the Hot Standby Router Protocol (HSRP) subsystem of Cisco IOS and IOS XE Software could allow an unauthenticated, adjacent attacker to receive potentially sensitive information from an affected device. The vulnerability is due to insufficient memory initialization. An attacker could exploit this vulnerability by receiving HSRPv2 traffic from an adjacent HSRP member. A successful exploit could allow the attacker to receive potentially sensitive information from the adjacent device.

A vulnerability in the Cisco Connected Mobile Experiences (CMX) software could allow an unauthenticated, adjacent attacker to access sensitive data on an affected device. The vulnerability is due to a lack of input and validation checking mechanisms for certain GET requests to API's on an affected device. An attacker could exploit this vulnerability by sending HTTP GET requests to an affected device. An exploit could allow the attacker to use this information to conduct additional reconnaissance attacks.

A vulnerability in Cisco TelePresence CE and RoomOS could allow an unauthenticated, adjacent attacker to view sensitive information on an affected device. This vulnerability exists because the affected software performs improper bounds checks. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to cause an out-of-bounds read that discloses sensitive information. Note: This vulnerability only affects Cisco Webex Desk Hub. There are no workarounds that address this vulnerability.

A vulnerability in the multicast DNS (mDNS) protocol configuration of Cisco Webex Meetings Client for MacOS could allow an unauthenticated adjacent attacker to obtain sensitive information about the device on which the Webex client is running. The vulnerability exists because sensitive information is included in the mDNS reply. An attacker could exploit this vulnerability by doing an mDNS query for a particular service against an affected device. A successful exploit could allow the attacker to gain access to sensitive information.

A vulnerability in Cisco Meeting Server (CMS) could allow an unauthenticated, adjacent attacker to access services running on internal device interfaces of an affected system. The vulnerability is due to incorrect default configuration of the device, which can expose internal interfaces and ports on the external interface of the system. A successful exploit could allow the attacker to gain unauthenticated access to configuration and database files and sensitive meeting information on an affected system. This vulnerability affects Cisco Meeting Server (CMS) 2000 Platforms that are running a CMS Software release prior to Release 2.2.13 or Release 2.3.4. Cisco Bug IDs: CSCvg76471.

Cisco-Meraki MS, MR, and MX devices with firmware before 2014-09-24 allow remote attackers to obtain sensitive credential information by leveraging unspecified HTTP handler access on the local network, aka Cisco-Meraki defect ID 00302012.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices makes it easy for remote attackers to determine the hidden SSID and passphrase for a Home Security Wi-Fi network.

A vulnerability in the Autonomic Networking feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to reset the Autonomic Control Plane (ACP) of an affected system and view ACP packets that are transferred in clear text within an affected system, an Information Disclosure Vulnerability. More Information: CSCvd51214. Known Affected Releases: Denali-16.2.1 Denali-16.3.1.

A vulnerability in the web application of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to specify non-log files as sources for syslog reporting. This vulnerability is due to improper restriction of the syslog configuration. An attacker could exploit this vulnerability by configuring non-log files as sources for syslog reporting through the web application. A successful exploit could allow the attacker to read non-log files on the CSPC.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. This vulnerability is due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit this vulnerability by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should trigger and drop for the ENIP packet.

A vulnerability in the Cisco IOS XE SD-WAN Software CLI could allow an authenticated, local attacker to elevate privileges and execute arbitrary code on the underlying operating system as the root user. An attacker must be authenticated on an affected device as a PRIV15 user. This vulnerability is due to insufficient file system protection and the presence of a sensitive file in the bootflash directory on an affected device. An attacker could exploit this vulnerability by overwriting an installer file stored in the bootflash directory with arbitrary commands that can be executed with root-level privileges. A successful exploit could allow the attacker to read and write changes to the configuration database on the affected device.

Multiple vulnerabilities in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. These vulnerabilities are due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit these vulnerabilities by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should be activated for the ENIP packet.

dot11t/t_if_dot11_hal_ath.c in Cisco IOS 12.3, 12.4, 15.0, and 15.1 allows remote attackers to cause a denial of service (assertion failure and reboot) via 802.11 wireless traffic, as demonstrated by a video call from Apple iOS 5.0 on an iPhone 4S, aka Bug ID CSCtt94391.

A vulnerability in Cisco NX-OS System Software running on Cisco MDS Multilayer Director Switches, Cisco Nexus 7000 Series Switches, and Cisco Nexus 7700 Series Switches could allow an authenticated, local attacker to access the Bash shell of an affected device's operating system, even if the Bash shell is disabled on the system. The vulnerability is due to insufficient sanitization of user-supplied parameters that are passed to certain functions of the Python scripting sandbox of the affected system. An attacker could exploit this vulnerability to escape the scripting sandbox and enter the Bash shell of the operating system with the privileges of the authenticated user for the affected system. To exploit this vulnerability, the attacker must have local access to the affected system and be authenticated to the affected system with administrative or Python execution privileges. Cisco Bug IDs: CSCvd86513.

A vulnerability in the restricted security domain implementation of Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to modify the behavior of default system policies, such as quality of service (QoS) policies, on an affected system. This vulnerability is due to improper access control when restricted security domains are used to implement multi-tenancy. An attacker with a valid user account associated with a restricted security domain could exploit this vulnerability. A successful exploit could allow the attacker to read, modify, or delete child policies created under default system policies, which are implicitly used by all tenants in the fabric, resulting in disruption of network traffic. Exploitation is not possible for policies under tenants that an attacker has no authorization to access.

A vulnerability in the UDP forwarding code of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to bypass configured management plane protection policies and access the Simple Network Management Plane (SNMP) server of an affected device. This vulnerability is due to incorrect UDP forwarding programming when using SNMP with management plane protection. An attacker could exploit this vulnerability by attempting to perform an SNMP operation using broadcast as the destination address that could be processed by an affected device that is configured with an SNMP server. A successful exploit could allow the attacker to communicate to the device on the configured SNMP ports. Although an unauthenticated attacker could send UDP datagrams to the configured SNMP port, only an authenticated user can retrieve or modify data using SNMP requests.

Multiple clientless SSL VPN products that run in web browsers, including Stonesoft StoneGate; Cisco ASA; SonicWALL E-Class SSL VPN and SonicWALL SSL VPN; SafeNet SecureWire Access Gateway; Juniper Networks Secure Access; Nortel CallPilot; Citrix Access Gateway; and other products, when running in configurations that do not restrict access to the same domain as the VPN, retrieve the content of remote URLs from one domain and rewrite them so they originate from the VPN's domain, which violates the same origin policy and allows remote attackers to conduct cross-site scripting attacks, read cookies that originated from other domains, access the Web VPN session to gain access to internal resources, perform key logging, and conduct other attacks. NOTE: it could be argued that this is a fundamental design problem in any clientless VPN solution, as opposed to a commonly-introduced error that can be fixed in separate implementations. Therefore a single CVE has been assigned for all products that have this design

A vulnerability in the bootloader of Cisco NX-OS Software could allow an unauthenticated attacker with physical access to an affected device, or an authenticated, local attacker with administrative credentials, to bypass NX-OS image signature verification.  This vulnerability is due to insecure bootloader settings. An attacker could exploit this vulnerability by executing a series of bootloader commands. A successful exploit could allow the attacker to bypass NX-OS image signature verification and load unverified software.

A vulnerability in the access control list (ACL) programming of Cisco IOS Software running on Cisco Industrial Ethernet 4000, 4010, and 5000 Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to the incorrect handling of IPv4 ACLs on switched virtual interfaces when an administrator enables and disables Resilient Ethernet Protocol (REP). An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device.

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to read any file in the file system of the underlying Linux operating system. The attacker must have valid credentials on the affected device. This vulnerability is due to incorrect validation of the arguments that are passed to a specific CLI command. An attacker could exploit this vulnerability by logging in to an affected device with low-privileged credentials and using the affected command. A successful exploit could allow the attacker access files in read-only mode on the Linux file system.

A vulnerability in the file policy feature that is used to inspect encrypted archive files of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured file policy to block an encrypted archive file. This vulnerability exists because of a logic error when a specific class of encrypted archive files is inspected. An attacker could exploit this vulnerability by sending a crafted, encrypted archive file through the affected device. A successful exploit could allow the attacker to send an encrypted archive file, which could contain malware and should have been blocked and dropped at the Cisco FTD device.

A vulnerability in the fabric infrastructure file system access control of Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to read arbitrary files on an affected system. This vulnerability is due to improper access control. An attacker with Administrator privileges could exploit this vulnerability by executing a specific vulnerable command on an affected device. A successful exploit could allow the attacker to read arbitrary files on the file system of the affected device.

A vulnerability in an access control mechanism of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to access services beyond the scope of their authorization. This vulnerability is due to insufficient enforcement of access control in the affected software. An attacker could exploit this vulnerability by directly accessing the internal services of an affected device. A successful exploit could allow the attacker to overwrite policies and impact the configuration and operation of the affected device.

Multiple vulnerabilities in the web UI and API endpoints of Cisco Application Policy Infrastructure Controller (APIC) or Cisco Cloud APIC could allow a remote attacker to perform a command injection or file upload attack on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability within the firewall configuration of the Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) could allow an unauthenticated, adjacent attacker to gain privileged access to services only available on the internal network of the device. The vulnerability is due to an incorrect firewall rule on the device. The misconfiguration could allow traffic sent to the public interface of the device to be forwarded to the internal virtual network of the APIC-EM. An attacker that is logically adjacent to the network on which the public interface of the affected APIC-EM resides could leverage this behavior to gain access to services listening on the internal network with elevated privileges. This vulnerability affects appliances or virtual devices running Cisco Application Policy Infrastructure Controller Enterprise Module prior to version 1.5. Cisco Bug IDs: CSCve89638.

A vulnerability in the EtherChannel port subscription logic of Cisco Nexus 9500 Series Switches could allow an unauthenticated, remote attacker to bypass access control list (ACL) rules that are configured on an affected device. This vulnerability is due to oversubscription of resources that occurs when applying ACLs to port channel interfaces. An attacker could exploit this vulnerability by attempting to access network resources that are protected by the ACL. A successful exploit could allow the attacker to access network resources that would be protected by the ACL that was applied on the port channel interface.

A vulnerability in the boot logic of Cisco Access Points Software could allow an authenticated, local attacker to execute unsigned code at boot time. The vulnerability is due to an improper check that is performed by the area of code that manages system startup processes. An attacker could exploit this vulnerability by modifying a specific file that is stored on the system, which would allow the attacker to bypass existing protections. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. Note: To exploit this vulnerability, the attacker would need to have access to the development shell (devshell) on the device.

A vulnerability in the SSH management feature of multiple Cisco Access Points (APs) platforms could allow a local, authenticated user to modify files on the affected device and possibly gain escalated privileges. The vulnerability is due to improper checking on file operations within the SSH management interface. A network administrator user could exploit this vulnerability by accessing an affected device through SSH management to make a configuration change. A successful exploit could allow the attacker to gain privileges equivalent to the root user.

A vulnerability in the detection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to send data directly to the kernel of an affected device. The vulnerability exists because the software improperly filters Ethernet frames sent to an affected device. An attacker could exploit this vulnerability by sending crafted packets to the management interface of an affected device. A successful exploit could allow the attacker to bypass the Layer 2 (L2) filters and send data directly to the kernel of the affected device. A malicious frame successfully delivered would make the target device generate a specific syslog entry.

A vulnerability in the fabric infrastructure VLAN connection establishment of the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, adjacent attacker to bypass security validations and connect an unauthorized server to the infrastructure VLAN. The vulnerability is due to insufficient security requirements during the Link Layer Discovery Protocol (LLDP) setup phase of the infrastructure VLAN. An attacker could exploit this vulnerability by sending a malicious LLDP packet on the adjacent subnet to the Cisco Nexus 9000 Series Switch in ACI mode. A successful exploit could allow the attacker to connect an unauthorized server to the infrastructure VLAN, which is highly privileged. With a connection to the infrastructure VLAN, the attacker can make unauthorized connections to Cisco Application Policy Infrastructure Controller (APIC) services or join other host endpoints.

Cisco Webex Business Suite before 39.1.0 contains a vulnerability that could allow an unauthenticated, remote attacker to affect the integrity of the application. The vulnerability is due to improper validation of host header values. An attacker with a privileged network position, either a man-in-the-middle or by intercepting wireless network traffic, could exploit this vulnerability to manipulate header values sent by a client to the affected application. The attacker could cause the application to use input from the header to redirect a user from the Cisco Webex Meetings Online site to an arbitrary site of the attacker's choosing.

A vulnerability in access control list (ACL) functionality of the Gigabit Ethernet Management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XE Software 16.1.1 Release, which prevents the ACL from working when applied against the management interface. An attacker could exploit this issue by attempting to access the device via the management interface.

A vulnerability in the TCP flags inspection feature for access control lists (ACLs) on Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. The vulnerability is due to incorrect processing of the ACL applied to an interface of an affected device when Cisco Express Forwarding load balancing using the 3-tuple hash algorithm is enabled. An attacker could exploit this vulnerability by sending traffic through an affected device that should otherwise be denied by the configured ACL. An exploit could allow the attacker to bypass protection offered by a configured ACL on the affected device. There are workarounds that address this vulnerability. Affected Cisco IOS XR versions are: Cisco IOS XR Software Release 5.1.1 and later till first fixed. First Fixed Releases: 6.5.2 and later, 6.6.1 and later.

A vulnerability in the management interface of Cisco Application Policy Infrastructure Controller (APIC) software could allow an unauthenticated, adjacent attacker to gain unauthorized access on an affected device. The vulnerability is due to a lack of proper access control mechanisms for IPv6 link-local connectivity imposed on the management interface of an affected device. An attacker on the same physical network could exploit this vulnerability by attempting to connect to the IPv6 link-local address on the affected device. A successful exploit could allow the attacker to bypass default access control restrictions on an affected device. Cisco Application Policy Infrastructure Controller (APIC) devices running versions prior to 4.2(0.21c) are affected.

A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) and Cisco RoomOS Software could allow an authenticated, local attacker to enable audio recording without notifying users. The vulnerability is due to the presence of unnecessary debug commands. An attacker could exploit this vulnerability by gaining unrestricted access to the restricted shell and using the specific debug commands. A successful exploit could allow the attacker to enable the microphone of an affected device to record audio without notifying users.

A vulnerability in the web management interface of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform an unauthorized system reset on an affected device. The vulnerability is due to improper authorization controls for a specific URL in the web management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could have a twofold impact: the attacker could either change the administrator password, gaining privileged access, or reset the network configuration details, causing a denial of service (DoS) condition. In both scenarios, manual intervention is required to restore normal operations.

A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) IPv4 access control list (ACL) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic.  This vulnerability exists because Cisco IOS Software and Cisco IOS XE Software do not support extended IPv4 ACLs for SNMP, but they do allow administrators to configure extended named IPv4 ACLs that are attached to the SNMP server configuration without a warning message. This can result in no ACL being applied to the SNMP listening process. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP operations that should be denied. The attacker has no control of the SNMP ACL configuration and would still need a valid SNMP version 2c (SNMPv2c) community string or SNMP version 3 (SNMPv3) user credentials. SNMP with IPv6 ACL configurations is not affected. For more information, see the section of this advisory.

A vulnerability with the access control list (ACL) management within a stacked switch configuration of Cisco Business 250 Series Smart Switches and Business 350 Series Managed Switches could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. This vulnerability is due to incorrect processing of ACLs on a stacked configuration when either the primary or backup switches experience a full stack reload or power cycle. An attacker could exploit this vulnerability by sending crafted traffic through an affected device. A successful exploit could allow the attacker to bypass configured ACLs, causing traffic to be dropped or forwarded in an unexpected manner. The attacker does not have control over the conditions that result in the device being in the vulnerable state. Note: In the vulnerable state, the ACL would be correctly applied on the primary devices but could be incorrectly applied to the backup devices.

A vulnerability in the application environment of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to gain unauthorized access to the JBoss Enterprise Application Platform (JBoss EAP) on an affected device. The vulnerability is due to an incorrect configuration of the authentication settings on the JBoss EAP. An attacker could exploit this vulnerability by authenticating with a specific low-privilege account. A successful exploit could allow the attacker to gain unauthorized access to the JBoss EAP, which should be limited to internal system accounts.

A vulnerability in the Graphite service of Cisco HyperFlex software could allow an unauthenticated, remote attacker to retrieve data from the Graphite service. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by sending crafted requests to the Graphite service. A successful exploit could allow the attacker to retrieve any statistics from the Graphite service. Versions prior to 3.5(2a) are affected.

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, adjacent attacker to bypass authentication and have direct unauthorized access to other vSmart containers. The vulnerability is due to an insecure default configuration of the affected system. An attacker could exploit this vulnerability by directly connecting to the exposed services. An exploit could allow the attacker to retrieve and modify critical system files.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to retrieve sensitive information from an affected device. The vulnerability is due to improper access controls for certain URLs on affected DCNM software. An attacker could exploit this vulnerability by connecting to the web-based management interface of an affected device and requesting specific URLs. A successful exploit could allow the attacker to download log files and diagnostic information from the affected device.