Memory access out of buffer boundaries issues was discovered in Contiki-NG 4.4 through 4.5, in the SNMP BER encoder/decoder. The length of provided input/output buffers is insufficiently verified during the encoding and decoding of data. This may lead to out-of-bounds buffer read or write access in BER decoding and encoding functions.

An out-of-bounds read in the SNMP stack in Contiki-NG 4.4 and earlier allows an attacker to cause a denial of service and potentially disclose information via crafted SNMP packets to snmp_ber_decode_string_len_buffer in os/net/app-layer/snmp/snmp-ber.c.

Buffer over-read vulnerability in the dtls_sha256_update function in Contiki-NG tinyDTLS through master branch 53a0d97 allows remote attackers to cause a denial of service via crafted data packet.

Contiki-NG is an operating system for internet of things devices. In version 4.8 and prior, when processing ICMP DAO packets in the `dao_input_storing` function, the Contiki-NG OS does not verify that the packet buffer is big enough to contain the bytes it needs before accessing them. Up to 16 bytes can be read out of bounds in the `dao_input_storing` function. An attacker can truncate an ICMP packet so that it does not contain enough data, leading to an out-of-bounds read on these lines. The problem has been patched in the "develop" branch of Contiki-NG, and is expected to be included in release 4.9. As a workaround, one can apply the changes in Contiki-NG pull request #2435 to patch the system.

An issue was discovered in Contiki-NG tinyDTLS through master branch 53a0d97. An infinite loop bug exists during the handling of a ClientHello handshake message. This bug allows remote attackers to cause a denial of service by sending a malformed ClientHello handshake message with an odd length of cipher suites, which triggers an infinite loop (consuming all resources) and a buffer over-read that can disclose sensitive information.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to 4.9 are vulnerable to an Out-of-bounds read. While processing the L2CAP protocol, the Bluetooth Low Energy stack of Contiki-NG needs to map an incoming channel ID to its metadata structure. While looking up the corresponding channel structure in get_channel_for_cid (in os/net/mac/ble/ble-l2cap.c), a bounds check is performed on the incoming channel ID, which is meant to ensure that the channel ID does not exceed the maximum number of supported channels.However, an integer truncation issue leads to only the lowest byte of the channel ID to be checked, which leads to an incomplete out-of-bounds check. A crafted channel ID leads to out-of-bounds memory to be read and written with attacker-controlled data. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. As a workaround, Users can apply the patch in Contiki-NG pull request 2081 on GitHub.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The low-power IPv6 network stack of Contiki-NG has a buffer module (os/net/ipv6/uipbuf.c) that processes IPv6 extension headers in incoming data packets. As part of this processing, the function uipbuf_get_next_header casts a pointer to a uip_ext_hdr structure into the packet buffer at different offsets where extension headers are expected to be found, and then reads from this structure. Because of a lack of bounds checking, the casting can be done so that the structure extends beyond the packet's end. Hence, with a carefully crafted packet, it is possible to cause the Contiki-NG system to read data outside the packet buffer. A patch that fixes the vulnerability is included in Contiki-NG 4.8.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in Contiki-NG may cast a UDP header structure at a certain offset in a packet buffer. The code does not check whether the packet buffer is large enough to fit a full UDP header structure from the offset where the casting is made. Hence, it is possible to cause an out-of-bounds read beyond the packet buffer. The problem affects anyone running devices with Contiki-NG versions previous to 4.8, and which may receive 6LoWPAN packets from external parties. The problem has been patched in Contiki-NG version 4.8.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. Because of insufficient validation of IPv6 neighbor discovery options in Contiki-NG, attackers can send neighbor solicitation packets that trigger an out-of-bounds read. The problem exists in the module os/net/ipv6/uip-nd6.c, where memory read operations from the main packet buffer, <code>uip_buf</code>, are not checked if they go out of bounds. In particular, this problem can occur when attempting to read the 2-byte option header and the Source Link-Layer Address Option (SLLAO). This attack requires ipv6 be enabled for the network. The problem has been patched in the develop branch of Contiki-NG. The upcoming 4.8 release of Contiki-NG will include the patch.Users unable to upgrade may apply the patch in Contiki-NG PR #1654.

Contiki-NG is an operating system for internet-of-things devices. In versions 4.9 and prior, when processing the various IPv6 header fields during IPHC header decompression, Contiki-NG confirms the received packet buffer contains enough data as needed for that field. But no similar check is done before decompressing the IPv6 address. Therefore, up to 16 bytes can be read out of bounds on the line with the statement `memcpy(&ipaddr->u8[16 - postcount], iphc_ptr, postcount);`. The value of `postcount` depends on the address compression used in the received packet and can be controlled by the attacker. As a result, an attacker can inject a packet that causes an out-of-bound read. As of time of publication, a patched version is not available. As a workaround, one can apply the changes in Contiki-NG pull request #2509 to patch the system.

Contiki-NG is an operating system for Internet of Things devices. An off-by-one error can be triggered in the Antelope database management system in the Contiki-NG operating system in versions 4.8 and prior. The problem exists in the Contiki File System (CFS) backend for the storage of data (file os/storage/antelope/storage-cfs.c). In the functions `storage_get_index` and `storage_put_index`, a buffer for merging two strings is allocated with one byte less than the maximum size of the merged strings, causing subsequent function calls to the cfs_open function to read from memory beyond the buffer size. The vulnerability has been patched in the "develop" branch of Contiki-NG, and is expected to be included in the next release. As a workaround, the problem can be fixed by applying the patch in Contiki-NG pull request #2425.

The code that processes DNS responses in uIP through 1.0, as used in Contiki and Contiki-NG, does not check whether the number of responses specified in the DNS packet header corresponds to the response data available in the DNS packet, leading to an out-of-bounds read and Denial-of-Service in resolv.c.

An issue was discovered in uIP through 1.0, as used in Contiki and Contiki-NG. Domain name parsing lacks bounds checks, allowing an attacker to corrupt memory with crafted DNS packets.

Buffer over-read vulnerability in Contiki-NG tinyDTLS through master branch 53a0d97 allows attackers obtain sensitive information via crafted input to dtls_ccm_decrypt_message().

Contiki-NG is an open-source, cross-platform operating system for IoT devices. An out-of-bounds read of 1 byte can be triggered when sending a packet to a device running the Contiki-NG operating system with SNMP enabled. The SNMP module is disabled in the default Contiki-NG configuration. The vulnerability exists in the os/net/app-layer/snmp/snmp-message.c module, where the snmp_message_decode function fails to check the boundary of the message buffer when reading a byte from it immediately after decoding an object identifier (OID). The problem has been patched in Contiki-NG pull request 2937. It will be included in the next release of Contiki-NG. Users are advised to either apply the patch manually or to wait for the next release. A workaround is to disable the SNMP module in the Contiki-NG build configuration.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. An out-of-bounds read of 1 byte can be triggered when sending a packet to a device running the Contiki-NG operating system with SNMP enabled. The SNMP module is disabled in the default Contiki-NG configuration. The vulnerability exists in the os/net/app-layer/snmp/snmp-ber.c module, where the function snmp_ber_decode_string_len_buffer decodes the string length from a received SNMP packet. In one place, one byte is read from the buffer, without checking that the buffer has another byte available, leading to a possible out-of-bounds read. The problem has been patched in Contiki-NG pull request #2936. It will be included in the next release of Contiki-NG. Users are advised to apply the patch manually or to wait for the next release. A workaround is to disable the SNMP module in the Contiki-NG build configuration.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An out-of-bounds read can be caused by an incoming DIO message when using the RPL-Lite implementation in the Contiki-NG operating system. More specifically, the prefix information of the DIO message contains a field that specifies the length of an IPv6 address prefix. The value of this field is not validated, which means that an attacker can set a value that is longer than the maximum prefix length. Subsequently, a memcmp function call that compares different prefixes can be called with a length argument that surpasses the boundary of the array allocated for the prefix, causing an out-of-bounds read. The problem has been patched in the "develop" branch of Contiki-NG, and is expected to be included in the next release. Users are advised to update as soon as they are able to or to manually apply the changes in Contiki-NG pull request #2721.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An attacker can trigger out-of-bounds reads in the RPL-Lite implementation of the RPL protocol in the Contiki-NG operating system. This vulnerability is caused by insufficient control of the lengths for DIO and DAO messages, in particular when they contain RPL sub-option headers. The problem has been patched in Contiki-NG 4.9. Users are advised to upgrade. Users unable to upgrade should manually apply the code changes in PR #2484.

Contiki-NG is an operating system for internet-of-things devices. In versions 4.9 and prior, when a packet is received, the Contiki-NG network stack attempts to start the periodic TCP timer if it is a TCP packet with the SYN flag set. But the implementation does not first verify that a full TCP header has been received. Specifically, the implementation attempts to access the flags field from the TCP buffer in the following conditional expression in the `check_for_tcp_syn` function. For this reason, an attacker can inject a truncated TCP packet, which will lead to an out-of-bound read from the packet buffer. As of time of publication, a patched version is not available. As a workaround, one can apply the changes in Contiki-NG pull request #2510 to patch the system.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. When reading the TCP MSS option value from an incoming packet, the Contiki-NG OS does not verify that certain buffer indices to read from are within the bounds of the IPv6 packet buffer, uip_buf. In particular, there is a 2-byte buffer read in the module os/net/ipv6/uip6.c. The buffer is indexed using 'UIP_IPTCPH_LEN + 2 + c' and 'UIP_IPTCPH_LEN + 3 + c', but the uip_buf buffer may not have enough data, resulting in a 2-byte read out of bounds. The problem has been patched in the "develop" branch of Contiki-NG, and is expected to be included in release 4.9. Users are advised to watch for the 4.9 release and to upgrade when it becomes available. There are no workarounds for this vulnerability aside from manually patching with the diff in commit `cde4e9839`.

An issue was discovered in Contiki-NG through 4.1. There is a buffer over-read in lookup in os/storage/antelope/lvm.c while parsing AQL (lvm_register_variable, lvm_set_variable_value, create_intersection, create_union).

Out-of-bounds read in gather_tree in PaddlePaddle before 2.4. 

drachtio-server before 0.8.19 has a heap-based buffer over-read via a long Request-URI in an INVITE request.

An issue was discovered in wifipcap/wifipcap.cpp in TCPFLOW through 1.5.0-alpha. There is an integer overflow in the function handle_prism during caplen processing. If the caplen is less than 144, one can cause an integer overflow in the function handle_80211, which will result in an out-of-bounds read and may allow access to sensitive memory (or a denial of service).

Patchelf v0.9 was discovered to contain an out-of-bounds read via the function modifyRPath at src/patchelf.cc.

FFmpeg n6.1.1 has an Out-of-bounds Read via libavcodec/ppc/vp8dsp_altivec.c, static const vec_s8 h_subpel_filters_outer

TensorFlow is an open source platform for machine learning. When the `BaseCandidateSamplerOp` function receives a value in `true_classes` larger than `range_max`, a heap oob read occurs. We have patched the issue in GitHub commit b389f5c944cadfdfe599b3f1e4026e036f30d2d4. The fix will be included in TensorFlow 2.11. We will also cherrypick this commit on TensorFlow 2.10.1, 2.9.3, and TensorFlow 2.8.4, as these are also affected and still in supported range.

TensorFlow is an open source platform for machine learning. The function MakeGrapplerFunctionItem takes arguments that determine the sizes of inputs and outputs. If the inputs given are greater than or equal to the sizes of the outputs, an out-of-bounds memory read or a crash is triggered. We have patched the issue in GitHub commit a65411a1d69edfb16b25907ffb8f73556ce36bb7. The fix will be included in TensorFlow 2.11.0. We will also cherrypick this commit on TensorFlow 2.8.4, 2.9.3, and 2.10.1.

Information disclosure due to buffer over-read in Bluetooth Host while A2DP streaming.

Information disclosure due to buffer over-read in Modem while parsing DNS hostname.

Improper input validation vulnerability for processing SIB12 PDU in Exynos modems prior to SMR Sep-2022 Release allows remote attacker to read out of bounds memory.

TensorFlow is an open source platform for machine learning. The `GatherNd` function takes arguments that determine the sizes of inputs and outputs. If the inputs given are greater than or equal to the sizes of the outputs, an out-of-bounds memory read is triggered. This issue has been patched in GitHub commit 595a65a3e224a0362d7e68c2213acfc2b499a196. The fix will be included in TensorFlow 2.10.0. We will also cherrypick this commit on TensorFlow 2.9.1, TensorFlow 2.8.1, and TensorFlow 2.7.2, as these are also affected and still in supported range. There are no known workarounds for this issue.

TensorFlow is an open source platform for machine learning. The `GatherNd` function takes arguments that determine the sizes of inputs and outputs. If the inputs given are greater than or equal to the sizes of the outputs, an out-of-bounds memory read or a crash is triggered. This issue has been patched in GitHub commit 4142e47e9e31db481781b955ed3ff807a781b494. The fix will be included in TensorFlow 2.10.0. We will also cherrypick this commit on TensorFlow 2.9.1, TensorFlow 2.8.1, and TensorFlow 2.7.2, as these are also affected and still in supported range. There are no known workarounds for this issue.

An issue was discovered in FRRouting FRR through 9.0. There is an out-of-bounds read in bgp_attr_aigp_valid in bgpd/bgp_attr.c because there is no check for the availability of two bytes during AIGP validation.

An issue was discovered in Mbed TLS before 2.28.1 and 3.x before 3.2.0. In some configurations, an unauthenticated attacker can send an invalid ClientHello message to a DTLS server that causes a heap-based buffer over-read of up to 255 bytes. This can cause a server crash or possibly information disclosure based on error responses. Affected configurations have MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE enabled and MBEDTLS_SSL_IN_CONTENT_LEN less than a threshold that depends on the configuration: 258 bytes if using mbedtls_ssl_cookie_check, and possibly up to 571 bytes with a custom cookie check function.

FreeRDP is a free implementation of the Remote Desktop Protocol (RDP), released under the Apache license. Affected versions are subject to an Out-Of-Bounds Read in the `general_YUV444ToRGB_8u_P3AC4R_BGRX` function. This issue is likely down to insufficient data for the `pSrc` variable and results in crashes. This issue has been addressed in version 3.0.0-beta3. Users are advised to upgrade. There are no known workarounds for this issue.

Information disclosure due to buffer over-read in Bluetooth HOST while pairing and connecting A2DP. in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables

Information disclosure due to buffer over-read in WLAN while WLAN frame parsing due to missing frame length check.

Information disclosure sue to buffer over-read in modem while processing ipv6 packet with hop-by-hop or destination option in header.

Nginx NJS v0.7.4 was discovered to contain an out-of-bounds read via njs_scope_value at njs_scope.h.

Information disclosure due to buffer over-read in WLAN while handling IBSS beacons frame.

Information disclosure in Modem due to buffer over-read while parsing the wms message received given the buffer and its length.

Out-of-bounds Read vulnerability in ICONICS GENESIS64 versions 10.97.1 and prior and Mitsubishi Electric MC Works64 versions 4.04E (10.95.210.01) and prior allows a remote unauthenticated attacker to disclose information on memory or cause a Denial of Service (DoS) condition by sending specially crafted packets to the GENESIS64 server.