Weak Password Requirements in GitHub repository janeczku/calibre-web prior to 0.6.20.

Kapsch TrafficCom RIS-9160 & RIS-9260 Roadside Units (RSUs) v3.2.0.829.23, v3.8.0.1119.42, and v4.6.0.1211.28 were discovered to lack secure password requirements for its BIOS Supervisor and User accounts, allowing attackers to bypass authentication via a bruteforce attack.

Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.12.

Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.10.

The TIBCO EBX Web Server component of TIBCO Software Inc.'s TIBCO EBX, TIBCO EBX, TIBCO EBX, and TIBCO Product and Service Catalog powered by TIBCO EBX contains a vulnerability that under certain specific conditions allows an attacker to enter a password other than the legitimate password and it will be accepted as valid. Affected releases are TIBCO Software Inc.'s TIBCO EBX: versions 5.8.123 and below, TIBCO EBX: versions 5.9.3, 5.9.4, 5.9.5, 5.9.6, 5.9.7, 5.9.8, 5.9.9, 5.9.10, 5.9.11, 5.9.12, 5.9.13, and 5.9.14, TIBCO EBX: versions 6.0.0 and 6.0.1, and TIBCO Product and Service Catalog powered by TIBCO EBX: version 1.0.0.

IBM Security Identity Manager 6.0.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 153628.

IBM Security Privileged Identity Manager Virtual Appliance 2.2.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 145236.

In Gradle Enterprise before 2023.1, a remote attacker may be able to gain access to a new installation (in certain installation scenarios) because of a non-unique initial system user password. Although this password must be changed upon the first login, it is possible that an attacker logs in before the legitimate administrator logs in.

IBM Security Guardium Big Data Intelligence (SonarG) 3.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 137772.

A vulnerability in the Gleez CMS 1.2.0 login page could allow an unauthenticated, remote attacker to perform multiple user enumerations, which can further help an attacker to perform login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side access control and login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Portal login page. An exploit could allow the attacker to identify existing users and perform brute-force password attacks on the Portal, as demonstrated by navigating to the user/4 URI.

Open Dental before version 18.4 installs a mysql database and uses the default credentials of "root" with a blank password. This allows anyone on the network with access to the server to access all database information.

An access control vulnerability in Hame SD1 Wi-Fi firmware <=V.20140224154640 allows an attacker to get system administrator through an open Telnet service.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

Weak password requirements in OpenC3 COSMOS v6.0.0 allow attackers to bypass authentication via a brute force attack.

An issue was discovered on Marbella KR8s Dashcam FF 2.0.8 devices. Once access is gained either by default, common, or cracked passwords, the video recordings (containing sensitive routes, conversations, and footage) are open for downloading by creating a socket to command port 7777, and then downloading video via port 7778 and audio via port 7779.

Victure RX1800 EN_V1.0.0_r12_110933 was discovered to utilize a weak default password which includes the last 8 digits of the Mac address.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.843 Application 20.0.1923 allows Weak Password Encryption / Encoding OVE-20230524-0007.

Weak password requirements issue exists in CHOCO TEI WATCHER mini (IB-MCT001) all versions. If this issue is exploited, a brute-force attack may allow an attacker unauthorized access and login.

I-doit pro 25 and below and I-doit open 25 and below employ weak password requirements for Administrator account creation. Attackers are able to easily guess users' passwords via a bruteforce attack.

Beijing Zed-3 Technologies Co.,Ltd VoIP simpliclty ASG 8.5.0.17807 (20181130-16:12) has a Weak password vulnerability.

IBM Security Guardium 11.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 196279.

A Weak Password Requirements issue was discovered in Rockwell Automation Allen-Bradley MicroLogix 1100 programmable-logic controllers 1763-L16AWA, Series A and B, Version 16.00 and prior versions; 1763-L16BBB, Series A and B, Version 16.00 and prior versions; 1763-L16BWA, Series A and B, Version 16.00 and prior versions; and 1763-L16DWD, Series A and B, Version 16.00 and prior versions and Allen-Bradley MicroLogix 1400 programmable logic controllers 1766-L32AWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWAA, Series A and B, Version 16.00 and prior versions; 1766-L32BXB, Series A and B, Version 16.00 and prior versions; 1766-L32BXBA, Series A and B, Version 16.00 and prior versions; and 1766-L32AWAA, Series A and B, Version 16.00 and prior versions. The affected products use a numeric password with a small maximum character size for the password.

Iteris Vantage Velocity Field Unit 2.3.1 and 2.4.2 devices have two users that are not documented and are configured with weak passwords (User bluetooth, password bluetooth; User eclipse, password eclipse). Also, bluetooth is the root password.

Renato v0.17.0 employs weak password complexity requirements, allowing attackers to crack user passwords via brute-force attacks.

Mealie 1.0.0beta3 employs weak password requirements which allows attackers to potentially gain unauthorized access to the application via brute-force attacks.

IBM Robotic Process Automation 21.0.0, 21.0.1, and 21.0.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 230634.

The OKLOK (3.1.1) mobile companion app for Fingerprint Bluetooth Padlock FB50 (2.3) has weak password requirements combined with improper restriction of excessive authentication attempts, which could allow a remote attacker to discover user credentials and obtain access via a brute force attack.

A CWE-521: Weak Password Requirements vulnerability exists that could allow an attacker to gain control of the device when the attacker brute forces the password. Affected Products: C-Bus Network Automation Controller - LSS5500NAC (Versions prior to V1.10.0), Wiser for C-Bus Automation Controller - LSS5500SHAC (Versions prior to V1.10.0), Clipsal C-Bus Network Automation Controller - 5500NAC (Versions prior to V1.10.0), Clipsal Wiser for C-Bus Automation Controller - 5500SHAC (Versions prior to V1.10.0), SpaceLogic C-Bus Network Automation Controller - 5500NAC2 (Versions prior to V1.10.0), SpaceLogic C-Bus Application Controller - 5500AC2 (Versions prior to V1.10.0)

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, weak password requirements may allow an attacker to gain access using brute force.

Weak Password Requirements in GitHub repository ikus060/minarca prior to 4.2.2.

In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the application utilizes weak password requirements, which may allow an attacker to gain unauthorized access.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. Insufficient password requirements for the MGate web application may allow an attacker to gain access by brute-forcing account passwords.

Weak Password Requirements vulnerability in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.1.0 through 1.6.0.  When users change their password to a simple password (with any character or symbol), attackers can easily guess the user's password and access the account. Users are advised to upgrade to Apache InLong's 1.7.0 or cherry-pick https://github.com/apache/inlong/pull/7805 https://github.com/apache/inlong/pull/7805 to solve it.

An issue was discovered in Infiray IRAY-A8Z3 1.0.957. There is a blank root password for TELNET by default.

A CWE-521: Weak Password Requirements vulnerability exists in Easergy Builder (Version 1.4.7.2 and older) which could allow an attacker to compromise a user account.

Weak Password Requirements in GitHub repository notrinos/notrinoserp prior to 0.7.

An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges on the device via poor credential management.

Verizon 4G LTE Network Extender GA4.38 - V0.4.038.2131 utilizes a weak default admin password generation algorithm which generates passwords that are accessible to unauthenticated attackers via the webUI login page.

Dell PowerScale OneFS versions 8.2.0.x through 9.3.0.x, contain a weak password requirement vulnerability. An administrator may create an account with no password. A remote attacker may potentially exploit this leading to a user account compromise.

The National Payments Corporation of India BHIM application 1.3 for Android relies on a four-digit passcode, which makes it easier for attackers to obtain access.

Weak Password Requirements in GitHub repository kromitgmbh/titra prior to 0.78.1.

Weak Password Requirements in GitHub repository modoboa/modoboa prior to 2.1.0.

The weak password on the web user interface can be exploited via HTTP or HTTPS. Once such access has been obtained, the other passwords can be changed. The weak password on Linux accounts can be accessed via SSH or Telnet, the former of which is by default enabled on trusted interfaces. While the SSH service does not support root login, a user logging in using either of the other Linux accounts may elevate to root access using the su command if they have access to the associated password.

Weak Password Requirements in GitHub repository polonel/trudesk prior to 1.2.2.

In cPanel before 88.0.3, an insecure site password is used for Mailman on a templated VM (SEC-551).

Weak default root user credentials allow remote attackers to easily obtain OS superuser privileges over the open TCP port for SSH.

The built-in web service for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower does not require users to have strong passwords.

Cloudexplorer-lite is an open source cloud software stack. Weak passwords can be easily guessed and are an easy target for brute force attacks. This can lead to an authentication system failure and compromise system security. Versions of cloudexplorer-lite prior to 1.2.0 did not enforce strong passwords. This vulnerability has been fixed in version 1.2.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.

There are no requirements for setting a complex password for PiiGAB M-Bus, which could contribute to a successful brute force attack if the password is inline with recommended password guidelines.

An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. The password for the PostgreSQL wguest account is weak.