A buffer underwrite vulnerability in the firmware verification routine of FortiOS before 7.0.1 may allow an attacker located in the adjacent network to potentially execute arbitrary code via a specifically crafted firmware image.
A weak authentication vulnerability [CWE-1390] in FortiNAC-F version 7.2.0, FortiNAC version 9.4.2 and below, 9.2 all versions, 9.1 all versions, 8.8 all versions, 8.7 all versions in device registration page may allow an unauthenticated attacker to perform password spraying attacks with an increased chance of success.
An authentication bypass using an alternate path or channel [CWE-288] in Fortinet FortiOS version 7.2.0 through 7.2.1 and 7.0.0 through 7.0.6, FortiProxy version 7.2.0 and version 7.0.0 through 7.0.6 and FortiSwitchManager version 7.2.0 and 7.0.0 allows an unauthenticated atttacker to perform operations on the administrative interface via specially crafted HTTP or HTTPS requests.
An authentication bypass by assumed-immutable data vulnerability [CWE-302] in the FortiOS SSH login component 7.2.0, 7.0.0 through 7.0.7, 6.4.0 through 6.4.9, 6.2 all versions, 6.0 all versions and FortiProxy SSH login component 7.0.0 through 7.0.5, 2.0.0 through 2.0.10, 1.2.0 all versions may allow a remote and unauthenticated attacker to login into the device via sending specially crafted Access-Challenge response from the Radius server.
The diagnosis_control.php page in Fortinet FortiWan (formerly AscernLink) before 4.2.5 allows remote authenticated users to download PCAP files via vectors related to the UserName GET parameter.
FortiOS 5.2.3, when configured to use High Availability (HA) and the dedicated management interface is enabled, does not require authentication for access to the ZebOS shell on the HA dedicated management interface, which allows remote attackers to obtain shell access via unspecified vectors.
An improper authentication vulnerability in SSL VPN in FortiOS 6.4.0, 6.2.0 to 6.2.3, 6.0.9 and below may result in a user being able to log in successfully without being prompted for the second factor of authentication (FortiToken) if they changed the case of their username.
An improper authentication vulnerability [CWE-287] in FortiOS versions 7.4.1 and below, versions 7.2.6 and below, and versions 7.0.12 and below when configured with FortiAuthenticator in HA may allow a readonly user to gain read-write access via successive login attempts.
An improper authentication in Fortinet FortiManager version 6.4.3 and below, 6.2.6 and below allows attacker to assign arbitrary Policy and Object modules via crafted requests to the request handler.
** UNSUPPORTED WHEN ASSIGNED **An improper authentication vulnerability [CWE-287] in Fortinet FortiWAN version 5.2.0 through 5.2.1 and version 5.1.1 through 5.1.2 may allow an authenticated attacker to escalate his privileges via HTTP or HTTPs requests with crafted JWT token values.
An improper authentication vulnerability in FortiMail 5.4.10, 6.0.7, 6.2.2 and earlier and FortiVoiceEntreprise 6.0.0 and 6.0.1 may allow a remote unauthenticated attacker to access the system as a legitimate user by requesting a password change via the user interface.
A unverified password change in Fortinet FortiADC version 6.2.0 through 6.2.3, 6.1.x, 6.0.x, 5.x.x allows an authenticated attacker to bypass the Old Password check in the password change form via a crafted HTTP request.
A improper authentication in Fortinet FortiAuthenticator version 6.4.0 allows user to bypass the second factor of authentication via a RADIUS login portal.
An improper authentication in Fortinet FortiClientMac 7.0.11 through 7.2.4 allows attacker to gain improper access to MacOS via empty password.
An issue was discovered on D-Link DSL-2888A devices with firmware prior to AU_2.31_V1.1.47ae55. An unauthenticated attacker could bypass authentication to access authenticated pages and functionality.
In Patient Information Center iX (PICiX) Version B.02, C.02, C.03, and PerformanceBridge Focal Point Version A.01, when an actor claims to have a given identity, the software does not prove or insufficiently proves the claim is correct.
An authentication bypass vulnerability exists in the web component of the Motorola MR2600. An attacker can exploit this vulnerability to access protected URLs and retrieve sensitive information.
The SolarWinds Access Rights Manager was found to be susceptible to a pre-authentication remote code execution vulnerability. If exploited, this vulnerability allows an unauthenticated user to run commands and executables.
Use of Default Password vulnerability in ABB RCCMD on Windows, Linux, MacOS allows Try Common or Default Usernames and Passwords.This issue affects RCCMD: before 4.40 230207.
TrackR Bravo device allows unauthenticated pairing, which enables unauthenticated connected applications to write to various device attributes. Updated apps, version 5.1.6 for iOS and 2.2.5 for Android, have been released by the vendor to address the vulnerabilities in CVE-2016-6538, CVE-2016-6539, CVE-2016-6540 and CVE-2016-6541.
A vulnerability classified as critical was found in Sichuan Yougou Technology KuERP up to 1.0.4. Affected by this vulnerability is the function checklogin of the file /application/index/common.php. The manipulation of the argument App_User_id/App_user_Token leads to improper authentication. The exploit has been disclosed to the public and may be used. The identifier VDB-252253 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability classified as critical has been found in SATO CL4NX-J Plus 1.13.2-u455_r2. This affects an unknown part of the component Cookie Handler. The manipulation with the input auth=user,level1,settings; web=true leads to improper authentication. Access to the local network is required for this attack. The exploit has been disclosed to the public and may be used. The identifier VDB-241029 was assigned to this vulnerability.
A vulnerability was found in SATO CL4NX-J Plus 1.13.2-u455_r2. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component WebConfig. The manipulation leads to improper authentication. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-241027.
A vulnerability has been found in harrystech Dynosaur-Rails and classified as critical. Affected by this vulnerability is the function basic_auth of the file app/controllers/application_controller.rb. The manipulation leads to improper authentication. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The patch is named 04b223813f0e336aab50bff140d0f5889c31dbec. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-221503.
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R7000 1.0.11.116_10.2.100 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of SOAP requests. The issue results from the lack of proper authentication verification before performing a password reset. An attacker can leverage this vulnerability to reset the admin password. Was ZDI-CAN-13483.
Improper authentication vulnerability in Tizen bluetooth-frwk prior to Firmware update JUN-2021 Release allows bluetooth attacker to take over the user's bluetooth device without user awareness.
An issue was discovered on NETGEAR Orbi Tri-Band Business WiFi Add-on Satellite (SRS60) AC3000 V2.5.1.106, Outdoor Satellite (RBS50Y) V2.5.1.106, and Pro Tri-Band Business WiFi Router (SRR60) AC3000 V2.5.1.106. The administrative SOAP interface allows an unauthenticated remote write of arbitrary Wi-Fi configuration data such as authentication details (e.g., the Web-admin password), network settings, DNS settings, system administration interface configuration, etc.
The HOT HOTBOX router with software 2.1.11 allows remote attackers to bypass authentication by configuring a source IP address that had previously been used for an authenticated session.
Improper authentication for some Intel(R) Server Boards, Server Systems and Compute Modules before version 1.59 may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access.
An authentication bypass vulnerability was reported in Lenovo ThinkPad Stack Wireless Router firmware version 1.1.3.4 that could allow escalation of privilege.
Improper authentication for some Intel(R) Server Boards, Server Systems and Compute Modules before version 1.59 may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access.
Certain NETGEAR devices are affected by authentication bypass. This affects GS110EMX before 1.0.1.7, GS810EMX before 1.7.1.3, XS512EM before 1.0.1.3, and XS724EM before 1.0.1.3.
Medtronic MyCareLink Smart 25000 contains an authentication protocol vulnerability where the method used to authenticate between the MCL Smart Patient Reader and the Medtronic MyCareLink Smart mobile app is vulnerable to bypass. This vulnerability enables an attacker to use another mobile device or malicious application on the patient’s smartphone to authenticate to the patient’s Medtronic Smart Reader, fooling the device into believing it is communicating with the original Medtronic smart phone application when executed within range of Bluetooth communication.
The ABB IDAL HTTP server CGI interface contains a URL that allows an unauthenticated attacker to bypass authentication and gain access to privileged functions. Specifically, /cgi/loginDefaultUser creates a session in an authenticated state and returns the session ID along with what may be the username and cleartext password of the user. An attacker can then supply an IDALToken value in a cookie, which will allow them to perform privileged operations such as restarting the service with /cgi/restart. A GET request to /cgi/loginDefaultUser may result in "1 #S_OK IDALToken=532c8632b86694f0232a68a0897a145c admin admin" or a similar response.
iDoors Reader 2.10.17 and earlier allows an attacker on the same network segment to bypass authentication to access the management console and operate the product via unspecified vectors.
There is an insufficient authentication vulnerability in Huawei Band 2 and Honor Band 3. The band does not sufficiently authenticate the device try to connect to it in certain scenario. Successful exploit could allow the attacker to spoof then connect to the band.
Panasonic AiSEG2 versions 2.00J through 2.93A allows adjacent attackers bypass authentication due to mishandling of X-Forwarded-For headers.
beegfs-ctl in ThinkParQ BeeGFS through 7.1.3 allows Authentication Bypass via communication with a BeeGFS metadata server (which is typically not exposed to external networks).
Medtronic MiniMed Insulin Pumps are designed to communicate using a wireless RF with other devices, such as blood glucose meters, glucose sensor transmitters, and CareLink USB devices. This wireless RF communication protocol does not properly implement authentication or authorization. An attacker with adjacent access to one of the affected insulin pump models can inject, replay, modify, and/or intercept data. This vulnerability could also allow attackers to change pump settings and control insulin delivery.
ZTE ZXHN H168N product with versions V2.2.0_PK1.2T5, V2.2.0_PK1.2T2, V2.2.0_PK11T7 and V2.2.0_PK11T have an improper change control vulnerability, which may allow an unauthorized user to perform unauthorized operations.
Certain NETGEAR devices are affected by authentication bypass. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.
NETGEAR WAC510 devices before 5.0.0.17 are affected by authentication bypass.
NETGEAR XR500 devices before 2.3.2.32 are affected by authentication bypass.
Certain NETGEAR devices are affected by authentication bypass. This affects GS810EMX before 1.0.0.5, XS512EM before 1.0.0.6, and XS724EM before 1.0.0.6.
Hetronic Nova-M prior to verson r161 uses fixed codes that are reproducible by sniffing and re-transmission. This can lead to unauthorized replay of a command, spoofing of an arbitrary message, or keeping the controlled load in a permanent "stop" state.
An issue was discovered on Vgate iCar 2 Wi-Fi OBD2 Dongle devices. The OBD port is used to receive measurement data and debug information from the car. This on-board diagnostics feature can also be used to send commands to the car (different for every vendor / car product line / car). No authentication is needed, which allows attacks from the local Wi-Fi network.
BN-SDWBP3 firmware version 1.0.9 and earlier allows an attacker on the same network segment to bypass authentication to access to the management screen and execute an arbitrary command via unspecified vectors.
Insufficient security checks exist in the recovery procedure used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. An attacker who is in the same subnetwork of the camera or has remote administrator access can fully compromise the device by performing a firmware recovery using a custom image.
Certain NETGEAR devices are affected by authentication bypass. This affects D6220 before 1.0.0.28, D6400 before 1.0.0.60, D8500 before 1.0.3.29, R6250 before 1.0.4.8, R6400 before 1.0.1.22, R6400v2 before 1.0.2.32, R7100LG before 1.0.0.32, R7300DST before 1.0.0.52, R8300 before 1.0.2.94, and R8500 before 1.0.2.100.
Certain NETGEAR devices are affected by authentication bypass. This affects R6300v2 before 1.0.4.8, R6400 before 1.0.1.20, R6700 before 1.0.1.20, R6900 before 1.0.1.20, R7000 before 1.0.7.10, R7100LG before V1.0.0.32, R7300DST before 1.0.0.52, R7900 before 1.0.1.16, R8000 before 1.0.3.36, R8300 before 1.0.2.94, R8500 before 1.0.2.94, WNDR3400v3 before 1.0.1.12, and WNR3500Lv2 before 1.2.0.40.