RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. The size check in the `gcoap_dns_server_proxy_get()` function contains a small typo that may lead to a buffer overflow in the subsequent `strcpy()`. In detail, the length of the `_uri` string is checked instead of the length of the `_proxy` string. The `_gcoap_forward_proxy_copy_options()` function does not implement an explicit size check before copying data to the `cep->req_etag` buffer that is `COAP_ETAG_LENGTH_MAX` bytes long. If an attacker can craft input so that `optlen` becomes larger than `COAP_ETAG_LENGTH_MAX`, they can cause a buffer overflow. If the input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerabilities could range from denial of service to arbitrary code execution. This issue has yet to be patched. Users are advised to add manual bounds checking.

RIOT-OS 2021.01 contains a buffer overflow vulnerability in /sys/net/gnrc/routing/rpl/gnrc_rpl_control_messages.c through the _parse_options() function.

RIOT-OS 2021.01 contains a buffer overflow vulnerability in sys/net/gnrc/routing/rpl/gnrc_rpl_validation.c through the gnrc_rpl_validation_options() function.

RIOT OS version 2020.01.1 is vulnerable to integer wrap-around in its implementation of calloc function, which can lead to arbitrary memory allocation, resulting in unexpected behavior such as a crash or a remote code injection/execution.

RIOT-OS, an operating system for Internet of Things (IoT) devices, contains a network stack with the ability to process 6LoWPAN frames. In version 2023.01 and prior, an attacker can send a crafted frame to the device resulting in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. This issue is fixed in pull request 19680. As a workaround, disable support for fragmented IP datagrams.

RIOT-OS, an operating system that supports Internet of Things devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2022.10, an attacker can send a crafted frame to the device resulting in a type confusion between IPv6 extension headers and a UDP header. This occurs while encoding a 6LoWPAN IPHC header. The type confusion manifests in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. Version 2022.10 fixes this issue. As a workaround, apply the patches manually.

RIOT-OS, an operating system that supports Internet of Things devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2022.10, an attacker can send a crafted frame to the device resulting in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. Version 2022.10 fixes this issue. As a workaround, disable support for fragmented IP datagrams or apply the patches manually.

RIOT RIOT-OS version after commit 7af03ab624db0412c727eed9ab7630a5282e2fd3 contains a Buffer Overflow vulnerability in sock_dns, an implementation of the DNS protocol utilizing the RIOT sock API that can result in Remote code executing. This attack appears to be exploitable via network connectivity.

RIOT 2020.04 has a buffer overflow in the base64 decoder. The decoding function base64_decode() uses an output buffer estimation function to compute the required buffer capacity and validate against the provided buffer size. The base64_estimate_decode_size() function calculates the expected decoded size with an arithmetic round-off error and does not take into account possible padding bytes. Due to this underestimation, it may be possible to craft base64 input that causes a buffer overflow.

RIOT-OS 2021.01 before commit 07f1254d8537497552e7dce80364aaead9266bbe contains a buffer overflow which could allow attackers to obtain sensitive information.

RIOT-OS 2021.01 before commit 609c9ada34da5546cffb632a98b7ba157c112658 contains a buffer overflow that could allow attackers to obtain sensitive information.

RIOT-OS 2021.01 before commit bc59d60be60dfc0a05def57d74985371e4f22d79 contains a buffer overflow which could allow attackers to obtain sensitive information.

RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. The `_on_rd_init()` function does not implement a size check before copying data to the `_result_buf` static buffer. If an attacker can craft a long enough payload, they could cause a buffer overflow. If the unchecked input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerability could range from denial of service to arbitrary code execution. This issue has yet to be patched. Users are advised to add manual bounds checking.

RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. Most codebases define assertion macros which compile to a no-op on non-debug builds. If assertions are the only line of defense against untrusted input, the software may be exposed to attacks that leverage the lack of proper input checks. In detail, in the `nimble_scanlist_update()` function below, `len` is checked in an assertion and subsequently used in a call to `memcpy()`. If an attacker is able to provide a larger `len` value while assertions are compiled-out, they can write past the end of the fixed-length `e->ad` buffer. If the unchecked input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerability could range from denial of service to arbitrary code execution. This issue has not yet been patched. Users are advised to add manual `len` checking.

RIOT-OS 2021.01 before commit 44741ff99f7a71df45420635b238b9c22093647a contains a buffer overflow which could allow attackers to obtain sensitive information.

RIOT-OS 2021.01 before commit 85da504d2dc30188b89f44c3276fc5a25b31251f contains a buffer overflow which could allow attackers to obtain sensitive information.

H3C N12 V100R005 contains a buffer overflow vulnerability due to the lack of length verification in the 5G wireless network processing function. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands by sending a POST request to /bin/webs.

H3C N12 V100R005 contains a buffer overflow vulnerability due to the lack of length verification in the mac address editing function. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands by sending a POST request to /bin/webs.

H3C N12 V100R005 contains a buffer overflow vulnerability due to the lack of length verification in the 2.4G wireless network processing function. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands by sending a POST request to /bin/webs.

OpenImageIO v3.1.0.0dev was discovered to contain a heap overflow via the component /OpenImageIO/fmath.h.

Multiple buffer overflows in STLport before 5.0.3 allow remote attackers to execute arbitrary code via unspecified vectors relating to (1) "print floats" and (2) a missing null termination in the "rope constructor."

Buffer overflow in the gdImageStringFTEx function in gdft.c in GD Graphics Library 2.0.33 and earlier allows remote attackers to cause a denial of service (application crash) and possibly execute arbitrary code via a crafted string with a JIS encoded font.

D-Link DIR-822 Rev.Bx devices with firmware v.202KRb06 and older allow a buffer overflow via long MacAddress data in a /HNAP1/SetClientInfo HNAP protocol message, which is mishandled in /usr/sbin/udhcpd during reading of the /var/servd/LAN-1-udhcpd.conf file.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects DC112A before 1.0.0.52, R6400 before 1.0.1.68, RAX200 before 1.0.3.106, WNDR3400v3 before 1.0.1.38, XR300 before 1.0.3.68, R8500 before 1.0.2.144, RAX75 before 1.0.3.106, R8300 before 1.0.2.144, and RAX80 before 1.0.3.106.

D-LINK DI-8003 v16.07.26A1 was discovered to contain a buffer overflow via the ip parameter in the ip_position_asp function.

Tenda AC6 v2.0 v15.03.06.50 was discovered to contain a buffer overflow in the function 'fromSetSysTime.

gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4_CONN_MSG_LEN is not sufficient for a trailing '\0' character.

NETGEAR WNR2000v3 devices before 1.1.2.14, WNR2000v4 devices before 1.0.0.66, and WNR2000v5 devices before 1.0.0.42 allow authentication bypass and remote code execution via a buffer overflow that uses a parameter in the administration webapp. The NETGEAR ID is PSV-2016-0261.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.66, D6400 before 1.0.0.100, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.52, DGN2200v4 before 1.0.0.118, EAX80 before 1.0.1.64, R6250 before 1.0.4.48, R7000 before 1.0.11.110, R7100LG before 1.0.0.72, R7900 before 1.0.4.30, R7960P before 1.4.1.64, R8000 before 1.0.4.62, RAX200 before 1.0.3.106, RS400 before 1.5.1.80, XR300 before 1.0.3.68, R6400v2 before 1.0.4.106, R7000P before 1.3.2.132, R8000P before 1.4.1.64, RAX20 before 1.0.2.82, RAX45 before 1.0.2.82, RAX80 before 1.0.3.106, R6700v3 before 1.0.4.106, R6900P before 1.3.2.132, R7900P before 1.4.1.64, RAX15 before 1.0.2.82, RAX50 before 1.0.2.82, and RAX75 before 1.0.3.106.

Multiple models of the Uniview IP Camera (e.g., IPC_G6103 B6103.16.10.B25.201218, IPC_G61, IPC21, IPC23, IPC32, IPC36, IPC62, and IPC_HCMN) offer an undocumented UDP service on port 7788 that allows a remote unauthenticated attacker to overflow an internal buffer and achieve code execution. By using this buffer overflow, a remote attacker can start the telnetd service. This service has a hardcoded default username and password (root/123456). Although it has a restrictive shell, this can be easily bypassed via the built-in ECHO shell command.

Asus RT-AC68U <3.0.0.4.385.20633 and RT-AC5300 <3.0.0.4.384.82072 are affected by a buffer overflow in blocking_request.cgi.

The boa httpd of Trendnet TEW-820AP 1.01.B01 has a stack overflow vulnerability in /boafrm/formIPv6Addr, /boafrm/formIpv6Setup, /boafrm/formDnsv6. The reason is that the check of ipv6 address is not sufficient, which allows attackers to construct payloads for attacks.

Buffer Overflow vulnerability in Vigor2620/LTE200 3.9.8.9 and earlier and Vigor2860/2925 3.9.8 and earlier and Vigor2862/2926 3.9.9.5 and earlier and Vigor2133/2762/2832 3.9.9 and earlier and Vigor165/166 4.2.7 and earlier and Vigor2135/2765/2766 4.4.5.1 and earlier and Vigor2865/2866/2927 4.4.5.3 and earlier and Vigor2962/3910 4.3.2.8/4.4.3.1 and earlier and Vigor3912 4.3.6.1 and earlier allows a remote attacker to execute arbitrary code via the CGI parser's handling of the "Content-Length" header of HTTP POST requests.

Two Buffer Overflow vulnerabilities exists in T10 V2_Firmware V4.1.8cu.5207_B20210320 in the http_request_parse function when processing host data in the HTTP request process.

Contiki-NG is an open-source, cross-platform operating system for internet of things (IoT) devices. In versions 4.8 and prior, an out-of-bounds write can occur in the BLE L2CAP module of the Contiki-NG operating system. The network stack of Contiki-NG uses a global buffer (packetbuf) for processing of packets, with the size of PACKETBUF_SIZE. In particular, when using the BLE L2CAP module with the default configuration, the PACKETBUF_SIZE value becomes larger then the actual size of the packetbuf. When large packets are processed by the L2CAP module, a buffer overflow can therefore occur when copying the packet data to the packetbuf. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be worked around by applying the patch manually.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 via the /cloud_config/router_post/check_reset_pwd_verify_code interface.

Buffer Overflow vulnerability in SunBK201 umicat through v.0.3.2 and fixed in v.0.3.3 allows an attacker to execute arbitrary code via the power(uct_int_t x, uct_int_t n) in src/uct_upstream.c.

Extreme Networks IQ Engine before 10.6r1a, and through 10.6r4 before 10.6r5, has a buffer overflow. This issue arises from the ah_webui service, which listens on TCP port 3009 by default.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reset_pwd_veirfy_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

An issue was discovered in MBed OS 6.16.0. When parsing hci reports, the hci parsing software dynamically determines the length of a list of reports by reading a byte from an input stream. It then fetches the length of the first report, uses it to calculate the beginning of the second report, etc. In doing this, it tracks the largest report so it can later allocate a buffer that fits every individual report (but only one at a time). It does not, however, validate that these addresses are all contained within the buffer passed to hciEvtProcessLeExtAdvReport. It is then possible, though unlikely, that the buffer designated to hold the reports is allocated in such a way that one of these out-of-bounds length fields is contained within the new buffer. When the (n-1)th report is copied, it overwrites the length field of the nth report. This now corrupted length field is then used for a memcpy into the new buffer, which may lead to a buffer overflow.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in /cloud_config/cloud_device/info interface, which allows a malicious user to executee arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/reset_cloud_pwd feature, which allows malicous users to execute arbitrary code on the system via a crafted post request.

A buffer overflow in ecma_builtin_typedarray_prototype_filter() in JerryScript version fe3a5c0 allows an attacker to construct a fake object or a fake arraybuffer with unlimited size.

Possible buffer overflow in WLAN handler due to lack of validation of destination buffer size before copying into it in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8096, APQ8098, IPQ8074, MDM9206, MDM9207C, MDM9607, MSM8996, MSM8996AU, MSM8998, QCA6174A, QCA6574AU, QCA8081, QCA9377, QCA9379, QCA9886, QCS605, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SM6150, SM7150, SM8150, SXR1130

An issue was discovered in Trusted Firmware-M through 2.1.0. User provided (and controlled) mailbox messages contain a pointer to a list of input arguments (in_vec) and output arguments (out_vec). These list pointers are never validated. Each argument list contains a buffer pointer and a buffer length field. After a PSA call, the length of the output arguments behind the unchecked pointer is updated in mailbox_direct_reply, regardless of the call result. This allows an attacker to write anywhere in the secure firmware, which can be used to take over the control flow, leading to remote code execution (RCE).

Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in the stats-over-http plugin of Apache Traffic Server allows an attacker to overwrite memory. This issue affects Apache Traffic Server 9.1.0.

Buffer overflow in PJSUA API when calling pjsua_call_dump. An attacker-controlled 'buffer' argument may cause a buffer overflow, since supplying an output buffer smaller than 128 characters may overflow the output buffer, regardless of the 'maxlen' argument supplied

Buffer Overflow vulnerability in tvnviewer.exe of TightVNC Viewer allows a remote attacker to execute arbitrary instructions via a crafted FramebufferUpdate packet from a VNC server.

Broadcom Emulex HBA Manager/One Command Manager versions before 11.4.425.0 and 12.8.542.31, if not installed in Strictly Local Management mode, have a buffer overflow vulnerability in the remote firmware download feature that could allow remote unauthenticated users to perform various attacks. In non-secure mode, the user is unauthenticated.

Buffer overflow vulnerability in file ecma-builtin-array-prototype.c:909 in function ecma_builtin_array_prototype_object_slice in Jerryscript before commit e1ce7dd7271288be8c0c8136eea9107df73a8ce2 on Oct 20, 2021.