A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A security vulnerability has been identified in HPE SimpliVity 380 Gen 9, HPE SimpliVity 380 Gen 10, HPE SimpliVity 380 Gen 10 G, HPE SimpliVity 2600 Gen 10, SimpliVity OmniCube, SimpliVity OmniStack for Cisco, SimpliVity OmniStack for Lenovo and SimpliVity OmniStack for Dell nodes. An API is used to execute a command manifest file during upgrade does not correctly prevent directory traversal and so can be used to execute manifest files in arbitrary locations on the node. The API does not require user authentication and is accessible over the management network, resulting in the potential for unauthenticated remote execution of manifest files. For all customers running HPE OmniStack version 3.7.9 and earlier. HPE recommends upgrading the OmniStack software to version 3.7.10 or later, which contains a permanent resolution. Customers and partners who can upgrade to 3.7.10 should upgrade at the earliest convenience. For all customers and partners unable to upgrade their environments to the recommended version 3.7.10, HPE has created a Temporary Workaround https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=mmr_sf-EN_US000061901&withFrame for you to implement. All customer should upgrade to the recommended 3.7.10 or later version at the earliest convenience.

HP StorageWorks P2000 G3 MSA array systems have a default account, which makes it easier for remote attackers to perform administrative tasks via unspecified vectors, a different vulnerability than CVE-2011-4788.

A potential security vulnerability has been identified in the HPE Moonshot Provisioning Manager v1.20. The HPE Moonshot Provisioning Manager is an application that is installed in a VMWare or Microsoft Hyper-V environment that is used to setup and configure an HPE Moonshot 1500 chassis. This vulnerability could be remotely exploited by an unauthenticated user to cause a directory traversal in user supplied input to the `khuploadfile.cgi` CGI ELF. The directory traversal could lead to Remote Code Execution, Denial of Service, and/or compromise system integrity. **Note:** HPE recommends that customers discontinue the use of the HPE Moonshot Provisioning Manager. The HPE Moonshot Provisioning Manager application is discontinued, no longer supported, is not available to download from the HPE Support Center, and no patch is available.

A Remote Code Execution vulnerability in HPE UCMDB version v10.10, v10.11, v10.20, v10.21, v10.22, v10.30, v10.31 was found.

Directory traversal vulnerability in goform/formExportDataLogs in HP Power Manager before 4.2.10 allows remote attackers to overwrite arbitrary files, and execute arbitrary code, via directory traversal sequences in the fileName parameter.

Directory traversal vulnerability in CommunicationServlet in HP Service Virtualization 3.x before 3.50.1, when the AutoPass license server is enabled, allows remote attackers to create arbitrary files and consequently execute arbitrary code via unspecified vectors, aka ZDI-CAN-2031.

Unspecified vulnerability in HP Select Identity 4.01 before 4.01.012 and 4.1x before 4.13.003 allows remote attackers to obtain unspecified access via unknown vectors.

Unspecified vulnerability in the Secure Shell (SSH) in HP Tru64 UNIX 5.1B-4 and 5.1B-3 allows remote attackers to identify valid users via unspecified vectors, probably related to timing attacks and AuthInteractiveFailureRandomTimeout.

A potential security vulnerability has been identified for certain HP multifunction printers (MFPs). The vulnerability may lead to Denial of Service when running HP Workpath solutions on potentially affected products.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Potential security vulnerabilities have been discovered on a certain HP LaserJet Pro printer that may allow an unauthorized user to reconfigure, reset the device.

Session fixation vulnerability in HP Systems Insight Manager (SIM) 4.2 and 5.0 SP4 and SP5 allows remote attackers to hijack web sessions by setting the JSESSIONID cookie.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Integer overflow in the _ncp32._NtrpTCPReceiveMsg function in rds.exe in the Cell Manager Database Service in the Application Recovery Manager component in HP OpenView Storage Data Protector 5.50 and 6.0 allows remote attackers to execute arbitrary code via a large value in the size parameter.

Unspecified vulnerability in CDE dtmailpr of HP Tru64 4.0F through 5.1B allows local users to gain privileges via unknown attack vectors. NOTE: due to lack of details in the vendor advisory, it is not clear whether this is the same issue as CVE-1999-0840.

A remote command injection vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

The DeleteSingleFile function in the HPISDataManagerLib.Datamgr ActiveX control in HPISDataManager.dll in HP Instant Support before 1.0.0.24 allows remote attackers to delete an arbitrary file via a full pathname in the argument.

A stack buffer overflow vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Unspecified vulnerability in Internet Group Management Protocol (IGMP) of HP Tru64 4.0F through 5.1A allows remote attackers to cause a denial of service via unknown attack vectors. NOTE: this might be the same issue as CVE-2002-2185, but there are insufficient details to be certain.

Buffer overflow in the MoveFile function in the HPISDataManagerLib.Datamgr ActiveX control in HPISDataManager.dll in HP Instant Support before 1.0.0.24 allows remote attackers to execute arbitrary code via a long argument, a different vulnerability than CVE-2007-5604, CVE-2007-5605, and CVE-2007-5607.

Heap-based buffer overflow in the FileFind::FindFile method in (1) MFC42.dll, (2) MFC42u.dll, (3) MFC71.dll, and (4) MFC71u.dll in Microsoft Foundation Class (MFC) Library 8.0, as used by the ListFiles method in hpqutil.dll 2.0.0.138 in Hewlett-Packard (HP) All-in-One and Photo & Imaging Gallery 1.1 and probably other products, allows context-dependent attackers to cause a denial of service (crash) or possibly execute arbitrary code via a long first argument.

A security vulnerability has been identified in the HPE Edgeline Infrastructure Manager, also known as HPE Edgeline Infrastructure Management Software, prior to version 1.22. The vulnerability could be remotely exploited to bypass remote authentication leading to execution of arbitrary commands, gaining privileged access, causing denial of service, and changing the configuration. HPE has released a software update to resolve the vulnerability in the HPE Edgeline Infrastructure Manager.

Stack-based buffer overflow in ovutil.dll in HP OpenView Network Node Manager (OV NNM) 7.51 and 7.53 allows remote attackers to execute arbitrary code via a long COOKIE variable.

Buffer overflow in Hitachi Cosminexus V4 through V7, Processing Kit for XML before 20070511, Developer's Kit for Java before 20070312, and third-party products that use this software, allows attackers to have an unknown impact via certain GIF images, related to use of GIF image processing APIs by a Java application.

A potential security vulnerability was identified in HPE iLO Amplifier Pack. The vulnerabilities could be remotely exploited to allow remote code execution.

A remote authorization bypass vulnerability was discovered in HPE 3PAR StoreServ Management and Core Software Media version(s): prior to 3.5.0.1.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A potential security vulnerability has been identified in the HPE Moonshot Provisioning Manager v1.20. The HPE Moonshot Provisioning Manager is an application that is installed in a VMWare or Microsoft Hyper-V environment that is used to setup and configure an HPE Moonshot 1500 chassis. This vulnerability could be remotely exploited by an unauthenticated user to cause a stack based buffer overflow using user supplied input to the `khuploadfile.cgi` CGI ELF. The stack based buffer overflow could lead to Remote Code Execution, Denial of Service, and/or compromise system integrity. **Note:** HPE recommends that customers discontinue the use of the HPE Moonshot Provisioning Manager. The HPE Moonshot Provisioning Manager application is discontinued, no longer supported, is not available to download from the HPE Support Center, and no patch is available.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Stack-based buffer overflow in OmniInet.exe (aka the backup client service daemon) in the Application Recovery Manager component in HP OpenView Storage Data Protector 5.50 and 6.0 allows remote attackers to execute arbitrary code via an MSG_PROTOCOL command with long arguments, a different vulnerability than CVE-2009-3844.

Buffer overflow in the SYSTEM_CREATE_INSTANCE function in the SAP RFC Library 6.40 and 7.00 before 20061211 allows remote attackers to execute arbitrary code via unspecified vectors. NOTE: This information is based upon a vague initial disclosure. Details will be updated after the grace period has ended.

Distributed SLS daemon (SLSd) on HP-UX B.11.11 allows remote attackers to overwrite arbitrary files and gain privileges via a crafted RPC request.

Unspecified vulnerability in HP Serviceguard for Linux; packaged for SuSE SLES8 and United Linux 1.0 before SG A.11.15.07, SuSE SLES9 and SLES10 before SG A.11.16.10, and Red Hat Enterprise Linux (RHEL) before SG A.11.16.10; allows remote attackers to obtain unauthorized access via unspecified vectors.

Multiple unspecified vulnerabilities in JP1/Cm2/Network Node Manager (NNM) before 07-10-05, and before 08-00-02 in the 08-x series, allow remote attackers to execute arbitrary code, cause a denial of service, or trigger invalid Web utility behavior.

Heap-based buffer overflow in Adobe Flash Player before 13.0.0.296 and 14.x through 18.x before 18.0.0.194 on Windows and OS X and before 11.2.202.468 on Linux allows remote attackers to execute arbitrary code via unspecified vectors, as exploited in the wild in June 2015.

Stack-based buffer overflow in magentproc.exe for Hewlett-Packard Mercury LoadRunner Agent 8.0 and 8.1, Performance Center Agent 8.0 and 8.1, and Monitor over Firewall 8.1 allows remote attackers to execute arbitrary code via a packet with a long server_ip_name field to TCP port 54345, which triggers the overflow in mchan.dll.

Unspecified vulnerability in HP Operations Manager i (OMi) 9.22, 9.23, 9.24, 9.25, 10.00, and 10.01 allows remote attackers to execute arbitrary code via unknown vectors.

Unspecified vulnerability in HP Easy Deploy, as distributed standalone and in HP Easy Tools before 3.0.1.1650, on HP Thin Client t5540, t5740, and t5740e devices and HP Flexible Thin Client t510, t520, t610, t620, and t820 devices allows remote attackers to execute arbitrary code via unknown vectors.

Format string vulnerability in the swask command in HP-UX B.11.11 and possibly other versions allows local users to execute arbitrary code via format string specifiers in the -s argument. NOTE: this might be a duplicate of CVE-2006-2574, but the details relating to CVE-2006-2574 are too vague to be certain.

Unspecified vulnerability in HP Ignite-UX server before C.6.9.150 for HP-UX B.11.00, B.11.11, and B.11.23 allows remote attackers to "gain root access" via unspecified vectors.

The OLE Point of Sale (OPOS) drivers before 1.13.003 on HP Point of Sale Windows PCs allow remote attackers to execute arbitrary code via vectors involving OPOSPOSPrinter.ocx for PUSB Thermal Receipt printers, SerialUSB Thermal Receipt printers, Hybrid POS printers with MICR, Value PUSB Receipt printers, and Value Serial/USB Receipt printers, aka ZDI-CAN-2506.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Buffer overflow in ldcconn in Hewlett-Packard (HP) Controller for Cisco Local Director on HP-UX 11.11i allows remote attackers to execute arbitrary code via a long string to TCP port 17781.

The OLE Point of Sale (OPOS) drivers before 1.13.003 on HP Point of Sale Windows PCs allow remote attackers to execute arbitrary code via vectors involving OPOSCheckScanner.ocx for PUSB Thermal Receipt printers, SerialUSB Thermal Receipt printers, Hybrid POS printers with MICR, Value PUSB Receipt printers, and Value Serial/USB Receipt printers, aka ZDI-CAN-2507.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

The OLE Point of Sale (OPOS) drivers before 1.13.003 on HP Point of Sale Windows PCs allow remote attackers to execute arbitrary code via vectors involving OPOSMSR.ocx for Mini MSR magnetic stripe readers, Retail Integrated Dual-Head MSR magnetic stripe readers, Integrated Single Head MSR w/o SRED magnetic stripe readers, Integrated Single Head w/o MSR SRED magnetic stripe readers, RP7 Single Head MSR w/o SRED magnetic stripe readers, POS keyboards, and POS keyboards with MSR, aka ZDI-CAN-2508.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

PHP remote file inclusion vulnerability in index.php in Achievo 1.1.0 allows remote attackers to execute arbitrary PHP code via a URL in the config_atkroot parameter.

The OLE Point of Sale (OPOS) drivers before 1.13.003 on HP Point of Sale Windows PCs allow remote attackers to execute arbitrary code via vectors involving OPOSCashDrawer.ocx for PUSB Thermal Receipt printers, SerialUSB Thermal Receipt printers, Hybrid POS printers with MICR, Value PUSB Receipt printers, Value Serial/USB Receipt printers, and USB Standard Duty cash drawers, aka ZDI-CAN-2505.