Hardlink before 0.1.2 operates on full file system objects path names which can allow a local attacker to use this flaw to conduct symlink attacks.

diffoscope before 256 allows directory traversal via an embedded filename in a GPG file. Contents of any file, such as ../.ssh/id_rsa, may be disclosed to an attacker. This occurs because the value of the gpg --use-embedded-filenames option is trusted.

An exploitable shared memory permissions vulnerability exists in the functionality of X11 Mesa 3D Graphics Library 19.1.2. An attacker can access the shared memory without any specific permissions to trigger this vulnerability.

Vulnerability in exuberant-ctags before 3.2.4-0.1 insecurely creates temporary files.

In systemd 240, bus_open_system_watch_bind_with_description in shared/bus-util.c (as used by systemd-resolved to connect to the system D-Bus instance), calls sd_bus_set_trusted, which disables access controls for incoming D-Bus messages. An unprivileged user can exploit this by executing D-Bus methods that should be restricted to privileged users, in order to change the system's DNS resolver settings.

x86: unintended memory sharing between guests On Intel systems that support the "virtualize APIC accesses" feature, a guest can read and write the global shared xAPIC page by moving the local APIC out of xAPIC mode. Access to this shared page bypasses the expected isolation that should exist between two guests.

GNU Enscript 1.6.1 and earlier allows local users to overwrite arbitrary files of the Enscript user via a symlink attack on temporary files.

A flaw was found in the Ansible Engine when the fetch module is used. An attacker could intercept the module, inject a new path, and then choose a new destination path on the controller node. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable.

An issue was discovered in LinuxTV xawtv before 3.107. The function dev_open() in v4l-conf.c does not perform sufficient checks to prevent an unprivileged caller of the program from opening unintended filesystem paths. This allows a local attacker with access to the v4l-conf setuid-root program to test for the existence of arbitrary files and to trigger an open on arbitrary files with mode O_RDWR. To achieve this, relative path components need to be added to the device path, as demonstrated by a v4l-conf -c /dev/../root/.bash_history command.

A WebExtension can request access to local files without the warning prompt stating that the extension will "Access your data for all websites" being displayed to the user. This allows extensions to run content scripts in local pages without permission warnings when a local file is opened. This vulnerability affects Firefox ESR < 60.3 and Firefox < 63.

An issue was discovered in Cobbler before 3.3.1. Files in /etc/cobbler are world readable. Two of those files contain some sensitive information that can be exposed to a local user who has non-privileged access to the server. The users.digest file contains the sha2-512 digest of users in a Cobbler local installation. In the case of an easy-to-guess password, it's trivial to obtain the plaintext string. The settings.yaml file contains secrets such as the hashed default password.

A template injection flaw was found in Ansible where a user's controller internal templating operations may remove the unsafe designation from template data. This issue could allow an attacker to use a specially crafted file to introduce templating injection when supplying templating data.

In the Linux kernel, the following vulnerability has been resolved: ptrace: slightly saner 'get_dumpable()' logic The 'dumpability' of a task is fundamentally about the memory image of the task - the concept comes from whether it can core dump or not - and makes no sense when you don't have an associated mm. And almost all users do in fact use it only for the case where the task has a mm pointer. But we have one odd special case: ptrace_may_access() uses 'dumpable' to check various other things entirely independently of the MM (typically explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for threads that no longer have a VM (and maybe never did, like most kernel threads). It's not what this flag was designed for, but it is what it is. The ptrace code does check that the uid/gid matches, so you do have to be uid-0 to see kernel thread details, but this means that the traditional "drop capabilities" model doesn't make any difference for this all. Make it all make a *bit* more sense by saying that if you don't have a MM pointer, we'll use a cached "last dumpability" flag if the thread ever had a MM (it will be zero for kernel threads since it is never set), and require a proper CAP_SYS_PTRACE capability to override.

A cron job in fcheck before 2.7.59 allows local users to overwrite arbitrary files via a symlink attack on a temporary file.

A memory leak flaw in the Linux kernel's hugetlbfs memory usage was found in the way the user maps some regions of memory twice using shmget() which are aligned to PUD alignment with the fault of some of the memory pages. A local user could use this flaw to get unauthorized access to some data.

The audit_syscall_entry function in the Linux kernel 2.6.28.7 and earlier on the x86_64 platform does not properly handle (1) a 32-bit process making a 64-bit syscall or (2) a 64-bit process making a 32-bit syscall, which allows local users to bypass certain syscall audit configurations via crafted syscalls, a related issue to CVE-2009-0342 and CVE-2009-0343.

yum-rhn-plugin in Red Hat Network Client Tools (aka rhn-client-tools) on Red Hat Enterprise Linux (RHEL) 5 and Fedora uses world-readable permissions for the /var/spool/up2date/loginAuth.pkl file, which allows local users to access the Red Hat Network profile, and possibly prevent future security updates, by leveraging authentication data from this file.

common/snapshots.py in Back In Time (aka backintime) 0.9.26 changes certain permissions to 0777 before deleting the files in an old backup snapshot, which allows local users to obtain sensitive information by reading these files, or interfere with backup integrity by modifying files that are shared across snapshots.

PHP 4.x up to 4.4.4 and PHP 5 up to 5.1.6 allows local users to bypass certain Apache HTTP Server httpd.conf options, such as safe_mode and open_basedir, via the ini_restore function, which resets the values to their php.ini (Master Value) defaults.

containerd is an industry-standard container runtime and is available as a daemon for Linux and Windows. In containerd before versions 1.3.9 and 1.4.3, the containerd-shim API is improperly exposed to host network containers. Access controls for the shim’s API socket verified that the connecting process had an effective UID of 0, but did not otherwise restrict access to the abstract Unix domain socket. This would allow malicious containers running in the same network namespace as the shim, with an effective UID of 0 but otherwise reduced privileges, to cause new processes to be run with elevated privileges. This vulnerability has been fixed in containerd 1.3.9 and 1.4.3. Users should update to these versions as soon as they are released. It should be noted that containers started with an old version of containerd-shim should be stopped and restarted, as running containers will continue to be vulnerable even after an upgrade. If you are not providing the ability for untrusted users to start containers in the same network namespace as the shim (typically the "host" network namespace, for example with docker run --net=host or hostNetwork: true in a Kubernetes pod) and run with an effective UID of 0, you are not vulnerable to this issue. If you are running containers with a vulnerable configuration, you can deny access to all abstract sockets with AppArmor by adding a line similar to deny unix addr=@**, to your policy. It is best practice to run containers with a reduced set of privileges, with a non-zero UID, and with isolated namespaces. The containerd maintainers strongly advise against sharing namespaces with the host. Reducing the set of isolation mechanisms used for a container necessarily increases that container's privilege, regardless of what container runtime is used for running that container.

In etcd before versions 3.3.23 and 3.4.10, certain directory paths are created (etcd data directory and the directory path when provided to automatically generate self-signed certificates for TLS connections with clients) with restricted access permissions (700) by using the os.MkdirAll. This function does not perform any permission checks when a given directory path exists already. A possible workaround is to ensure the directories have the desired permission (700).

User credentials can be manipulated and stolen by Native CephFS consumers of OpenStack Manila, resulting in potential privilege escalation. An Open Stack Manila user can request access to a share to an arbitrary cephx user, including existing users. The access key is retrieved via the interface drivers. Then, all users of the requesting OpenStack project can view the access key. This enables the attacker to target any resource that the user has access to. This can be done to even "admin" users, compromising the ceph administrator. This flaw affects Ceph versions prior to 14.2.16, 15.x prior to 15.2.8, and 16.x prior to 16.2.0.

SPICE allows local guest OS users to read from or write to arbitrary host memory locations via crafted primary surface parameters, a similar issue to CVE-2015-5261.

QEMU (aka Quick Emulator) built with the NE2000 device emulation support is vulnerable to an OOB r/w access issue. It could occur while performing 'ioport' r/w operations. A privileged (CAP_SYS_RAWIO) user/process could use this flaw to leak or corrupt QEMU memory bytes.

Heap-based buffer overflow in SPICE before 0.12.6 allows guest OS users to read and write to arbitrary memory locations on the host via guest QXL commands related to surface creation.

For Eclipse Jetty versions <= 9.4.40, <= 10.0.2, <= 11.0.2, if an exception is thrown from the SessionListener#sessionDestroyed() method, then the session ID is not invalidated in the session ID manager. On deployments with clustered sessions and multiple contexts this can result in a session not being invalidated. This can result in an application used on a shared computer being left logged in.

OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. In versions 2.4.8 and earlier, when starting the cupsd server with a Listen configuration item pointing to a symbolic link, the cupsd process can be caused to perform an arbitrary chmod of the provided argument, providing world-writable access to the target. Given that cupsd is often running as root, this can result in the change of permission of any user or system files to be world writable. Given the aforementioned Ubuntu AppArmor context, on such systems this vulnerability is limited to those files modifiable by the cupsd process. In that specific case it was found to be possible to turn the configuration of the Listen argument into full control over the cupsd.conf and cups-files.conf configuration files. By later setting the User and Group arguments in cups-files.conf, and printing with a printer configured by PPD with a `FoomaticRIPCommandLine` argument, arbitrary user and group (not root) command execution could be achieved, which can further be used on Ubuntu systems to achieve full root command execution. Commit ff1f8a623e090dee8a8aadf12a6a4b25efac143d contains a patch for the issue.

linki.py in ekg 2005-06-05 and earlier allows local users to overwrite or create arbitrary files via a symlink attack on temporary files.

Race condition in cpio 2.6 and earlier allows local users to modify permissions of arbitrary files via a hard link attack on a file while it is being decompressed, whose permissions are changed by cpio after the decompression is complete.

The mysqlaccess script in MySQL 4.0.23 and earlier, 4.1.x before 4.1.10, 5.0.x before 5.0.3, and other versions including 3.x, allows local users to overwrite arbitrary files or read temporary files via a symlink attack on temporary files.

The PEAR_REST class in REST.php in PEAR in PHP through 5.6.0 allows local users to write to arbitrary files via a symlink attack on a (1) rest.cachefile or (2) rest.cacheid file in /tmp/pear/cache/, related to the retrieveCacheFirst and useLocalCache functions.

The rs_filter_graph function in librawstudio/rs-filter.c in rawstudio might allow local users to truncate arbitrary files via a symlink attack on (1) /tmp/rs-filter-graph.png or (2) /tmp/rs-filter-graph.

fr-archive-libarchive.c in GNOME file-roller through 3.36.1 allows Directory Traversal during extraction because it lacks a check of whether a file's parent is a symlink to a directory outside of the intended extraction location.

init_tmp in TeeJee.FileSystem.vala in Timeshift before 20.03 unsafely reuses a preexisting temporary directory in the predictable location /tmp/timeshift. It follows symlinks in this location or uses directories owned by unprivileged users. Because Timeshift also executes scripts under this location, an attacker can attempt to win a race condition to replace scripts created by Timeshift with attacker-controlled scripts. Upon success, an attacker-controlled script is executed with full root privileges. This logic is practically always triggered when Timeshift runs regardless of the command-line arguments used.

A flaw was found in Mercurial before 4.9. It was possible to use symlinks and subrepositories to defeat Mercurial's path-checking logic and write files outside a repository.

htpasswd and htdigest in Apache 2.0a9, 1.3.14, and others allows local users to overwrite arbitrary files via a symlink attack.

deepin-clone before 1.1.3 uses a predictable path /tmp/.deepin-clone/mount/<block-dev-basename> in the Helper::temporaryMountDevice() function to temporarily mount a file system as root. An unprivileged user can prepare a symlink at this location to have the file system mounted in an arbitrary location. By winning a race condition, the attacker can also enter the mount point, thereby preventing a subsequent unmount of the file system.

Inappropriate implementation in Google Updater in Google Chrome on Windows prior to 94.0.4606.54 allowed a remote attacker to perform local privilege escalation via a crafted file.

Puppet before 3.3.3 and 3.4 before 3.4.1 and Puppet Enterprise (PE) before 2.8.4 and 3.1 before 3.1.1 allows local users to overwrite arbitrary files via a symlink attack on unspecified files.

p7zip 9.20.1 allows remote attackers to write to arbitrary files via a symlink attack in an archive.

A symlink following vulnerability was found in the ABRT post-create event handler scripts in libreport. Event scripts write output files using shell redirections without the O_NOFOLLOW flag. If the target file is replaced with a symlink, the shell process running as root follows the symlink and writes content to the symlink target, allowing arbitrary file overwrites on the system.

The sudoedit personality of Sudo before 1.9.5 may allow a local unprivileged user to perform arbitrary directory-existence tests by winning a sudo_edit.c race condition in replacing a user-controlled directory by a symlink to an arbitrary path.

An issue was discovered in crun before 0.10.5. With a crafted image, it doesn't correctly check whether a target is a symlink, resulting in access to files outside of the container. This occurs in libcrun/linux.c and libcrun/chroot_realpath.c.

storeBackup.pl in storeBackup through 3.5 relies on the /tmp/storeBackup.lock pathname, which allows symlink attacks that possibly lead to privilege escalation. (Local users can also create a plain file named /tmp/storeBackup.lock to block use of storeBackup until an admin manually deletes that file.)

Versions of the npm CLI prior to 6.13.3 are vulnerable to an Arbitrary File Write. It is possible for packages to create symlinks to files outside of thenode_modules folder through the bin field upon installation. A properly constructed entry in the package.json bin field would allow a package publisher to create a symlink pointing to arbitrary files on a user's system when the package is installed. This behavior is still possible through install scripts. This vulnerability bypasses a user using the --ignore-scripts install option.

pip before 1.3 allows local users to overwrite arbitrary files via a symlink attack on a file in the /tmp/pip-build temporary directory.

A certain Debian patch for txt2man 1.5.5, as used in txt2man 1.5.5-2, 1.5.5-4, and others, allows local users to overwrite arbitrary files via a symlink attack on /tmp/2222.

ikiwiki before 3.20110608 allows remote attackers to hijack root's tty and run symlink attacks.