A Resource Exhaustion issue was discovered in Moxa NPort 5110 Version 2.2, NPort 5110 Version 2.4, NPort 5110 Version 2.6, NPort 5110 Version 2.7, NPort 5130 Version 3.7 and prior, and NPort 5150 Version 3.7 and prior. An attacker may be able to exhaust memory resources by sending a large amount of TCP SYN packets.

In Moxa NPort 5210, 5230, and 5232 versions 2.9 build 17030709 and prior, the amount of resources requested by a malicious actor are not restricted, allowing for a denial-of-service condition.

Moxa TN-5900 v3.1 series routers, MGate 5109 v2.2 series protocol gateways, and MGate 5101-PBM-MN v2.1 series protocol gateways were discovered to contain a memory leak which allows attackers to cause a Denial of Service (DoS) via crafted packets.

Moxa MXView 2.8 allows remote attackers to cause a Denial of Service by sending overly long junk payload for the MXView client login credentials.

An exploitable denial-of-service vulnerability exists in ServiceAgent functionality of the Moxa AWK-3131A, firmware version 1.13. A specially crafted packet can cause an integer underflow, triggering a large memcpy that will access unmapped or out-of-bounds memory. An attacker can send this packet while unauthenticated to trigger this vulnerability.

An exploitable denial of service vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP URI can cause a null pointer dereference resulting in denial of service. An attacker can send a GET request to "/MOXA\_CFG2.ini" without a cookie header to trigger this vulnerability.

Exploitable denial of service vulnerabilities exists in the Service Agent functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted packet can cause a denial of service. An attacker can send a large packet to 4000/tcp to trigger this vulnerability.

An issue was discovered on MOXA Mgate MB3180 Version 2.1 Build 18113012. Attacker could send a huge amount of TCP SYN packet to make web service's resource exhausted. Then the web server is denial-of-service.

Two buffer overflows in the built-in web server in Moxa NPort IAW5000A-I/O Series firmware version 2.2 or earlier may allow a remote attacker to cause a denial-of-service condition.

Data can be copied without validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier, which may allow a remote attacker to cause denial-of-service conditions.

An exploitable denial of service vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP URI can cause a null pointer dereference resulting in denial of service. An attacker can send a GET request to "/MOXA\_LOG.ini" without a cookie header to trigger this vulnerability.

Exploitable denial of service vulnerabilities exists in the Service Agent functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted packet can cause a denial of service. An attacker can send a large packet to 4001/tcp to trigger this vulnerability.

An exploitable denial of service vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP URI can cause a null pointer dereference resulting in denial of service. An attacker can send a GET request to "/MOXA\_CFG.ini" without a cookie header to trigger this vulnerability.

Improper validation of the ChassisID TLV in userdisk/vport_lldpd in Moxa Camera VPort 06EC-2V Series, version 1.1, allows attackers to cause a denial of service due to a negative number passed to the memcpy function via a crafted lldp packet.

A vulnerability has been identified in the EDR-810, EDR-G902, and EDR-G903 Series, making them vulnerable to the denial-of-service vulnerability. This vulnerability stems from insufficient input validation in the URI, potentially enabling malicious users to trigger the device reboot.

A stack-based buffer overflow in the built-in web server in Moxa NPort W2150A/W2250A Series firmware version 2.3 and prior allows a remote attacker to exploit the vulnerability by sending crafted payload to the web service. Successful exploitation of the vulnerability could result in denial of service.

On Moxa EDS-G508E, EDS-G512E, and EDS-G516E devices (with firmware through 6.0), denial of service can occur via PROFINET DCE-RPC endpoint discovery packets.

In Moxa ioLogik 2500 series firmware, Version 3.0 or lower, and IOxpress configuration utility, Version 2.3.0 or lower, frequent and multiple requests for short-term use may cause the web server to fail.

An exploitable null pointer dereference exists in the Web Application functionality of Moxa AWK-3131A Wireless Access Point running firmware 1.1. Any HTTP GET request not preceded by an '/' will cause a segmentation fault in the web server. An attacker can send any of a multitude of potentially unexpected HTTP get requests to trigger this vulnerability.

An exploitable null pointer dereference vulnerability exists in the Web Application /forms/web_runScript iw_filename functionality of Moxa AWK-3131A Wireless Access Point running firmware 1.1. An HTTP POST request with a blank line in the header will cause a segmentation fault in the web server.

An integer underflow was discovered in userdisk/vport_lldpd in Moxa Camera VPort 06EC-2V Series, version 1.1, improper validation of the PortID TLV leads to Denial of Service via a crafted lldp packet.

A denial of service vulnerability exists in the web server functionality of Moxa SDS-3008 Series Industrial Ethernet Switch 2.1. A specially-crafted HTTP message header can lead to denial of service. An attacker can send an HTTP request to trigger this vulnerability.

MOXA NPort 5110: Firmware Versions 2.10 is vulnerable to an out-of-bounds write that can cause the device to become unresponsive.

Memory leak on Moxa Secure Router EDR-G903 devices before 3.4.12 allows remote attackers to cause a denial of service (memory consumption) by executing the ping function.

Moxa Secure Router EDR-G903 devices before 3.4.12 allow remote attackers to cause a denial of service (cold start) by sending two crafted ping requests.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. A high rate of transit traffic may cause a low-memory condition and a denial of service.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. An Integer overflow in the built-in web server allows remote attackers to initiate DoS.

An Injection issue was discovered in Moxa NPort 5110 Version 2.2, NPort 5110 Version 2.4, NPort 5110 Version 2.6, NPort 5110 Version 2.7, NPort 5130 Version 3.7 and prior, and NPort 5150 Version 3.7 and prior. An attacker may be able to inject packets that could potentially disrupt the availability of the device.

Improper validation of the ChassisID TLV in userdisk/vport_lldpd in Moxa Camera VPort 06EC-2V Series, version 1.1, allows attackers to cause a denial of service due to a NULL pointer dereference via a crafted lldp packet.

An issue was discovered in Moxa NPort 5110 versions prior to 2.6, NPort 5130/5150 Series versions prior to 3.6, NPort 5200 Series versions prior to 2.8, NPort 5400 Series versions prior to 3.11, NPort 5600 Series versions prior to 3.7, NPort 5100A Series & NPort P5150A versions prior to 1.3, NPort 5200A Series versions prior to 1.3, NPort 5150AI-M12 Series versions prior to 1.2, NPort 5250AI-M12 Series versions prior to 1.2, NPort 5450AI-M12 Series versions prior to 1.2, NPort 5600-8-DT Series versions prior to 2.4, NPort 5600-8-DTL Series versions prior to 2.4, NPort 6x50 Series versions prior to 1.13.11, NPort IA5450A versions prior to v1.4. The amount of resources requested by a malicious actor is not restricted, leading to a denial-of-service caused by resource exhaustion.

Moxa IKS and EDS allow remote authenticated users to cause a denial of service via a specially crafted packet, which may cause the switch to crash.

A prototype pollution in the lib.merge function of xe-utils v3.5.31 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload.

A prototype pollution in the function deepMerge of @stryker-mutator/util v8.6.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload.

An issue was discovered in Open5gs v2.7.2. InitialUEMessage, Registration request sent at a specific time can crash AMF due to incorrect error handling of gmm_state_exception() function upon receipt of the Nausf_UEAuthentication_Authenticate response.

A prototype pollution in the lib.deepMerge function of @zag-js/core v0.50.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload.

An issue was discovered in MediaWiki before 1.35.5, 1.36.x before 1.36.3, and 1.37.x before 1.37.1. A denial of service (resource consumption) can be accomplished by searching for a very long key in a Language Name Search.

This vulnerability affects Snowplow Collector 3.x before 3.3.0 (unless it’s set up behind a reverse proxy that establishes payload limits). It involves sending very large payloads to the Collector and can render it unresponsive to the rest of the requests. As a result, data would not enter the pipeline and would be potentially lost.

Apache OpenMeetings 1.0.0 doesn't check contents of files being uploaded. An attacker can cause a denial of service by uploading multiple large files to the server.

In Eclipse Mosquitto 1.4.14, a user can shutdown the Mosquitto server simply by filling the RAM memory with a lot of connections with large payload. This can be done without authentications if occur in connection phase of MQTT protocol.

A vulnerability in the DNS inspection handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to a lack of proper processing of incoming requests. An attacker could exploit this vulnerability by sending crafted DNS requests at a high rate to an affected device. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.

The Traffic Router component of the incubating Apache Traffic Control project is vulnerable to a Slowloris style Denial of Service attack. TCP connections made on the configured DNS port will remain in the ESTABLISHED state until the client explicitly closes the connection or Traffic Router is restarted. If connections remain in the ESTABLISHED state indefinitely and accumulate in number to match the size of the thread pool dedicated to processing DNS requests, the thread pool becomes exhausted. Once the thread pool is exhausted, Traffic Router is unable to service any DNS request, regardless of transport protocol.

Keep-alive HTTP and HTTPS connections can remain open and inactive for up to 2 minutes in Node.js 6.16.0 and earlier. Node.js 8.0.0 introduced a dedicated server.keepAliveTimeout which defaults to 5 seconds. The behavior in Node.js 6.16.0 and earlier is a potential Denial of Service (DoS) attack vector. Node.js 6.17.0 introduces server.keepAliveTimeout and the 5-second default.

The skge driver 1.5 in Linux kernel 2.6.15 on Ubuntu does not properly use the spin_lock and spin_unlock functions, which allows remote attackers to cause a denial of service (machine crash) via a flood of network traffic.

By sending a specially crafted HTTP GET request to a listening Rapid7 Metasploit HTTP handler, an attacker can register an arbitrary regular expression. When evaluated, this malicious handler can either prevent new HTTP handler sessions from being established, or cause a resource exhaustion on the Metasploit server.

The MikroTik Router hAP Lite 6.25 has no protection mechanism for unsolicited TCP ACK packets in the case of a fast network connection, which allows remote attackers to cause a denial of service (CPU consumption) by sending many ACK packets. After the attacker stops the exploit, the CPU usage is 100% and the router requires a reboot for normal operation.

Denial of Service (DoS) vulnerability for Cerberus Enterprise 8.0.10.3 web administration. The vulnerability exists when the web server, default port 10001, attempts to process a large number of incomplete HTTP requests.

In WhatsUp Gold versions released before 2023.1.3, an uncontrolled resource consumption vulnerability exists. A specially crafted unauthenticated HTTP request to the TestController Chart functionality can lead to denial of service.

A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.

net/http in Go before 1.16.12 and 1.17.x before 1.17.5 allows uncontrolled memory consumption in the header canonicalization cache via HTTP/2 requests.

Werkzeug is a Web Server Gateway Interface web application library. Applications using `werkzeug.formparser.MultiPartParser` corresponding to a version of Werkzeug prior to 3.0.6 to parse `multipart/form-data` requests (e.g. all flask applications) are vulnerable to a relatively simple but effective resource exhaustion (denial of service) attack. A specifically crafted form submission request can cause the parser to allocate and block 3 to 8 times the upload size in main memory. There is no upper limit; a single upload at 1 Gbit/s can exhaust 32 GB of RAM in less than 60 seconds. Werkzeug version 3.0.6 fixes this issue.