A vulnerability in Simple Network Management Protocol (SNMP) functions of Cisco ASR 1000 Series Aggregation Services Routers running Cisco IOS XE Software Release 3.13.6S, 3.16.2S, or 3.17.1S could allow an authenticated, remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. More Information: CSCux68796. Known Affected Releases: 15.5(3)S2.1 15.6(1)S1.1. Known Fixed Releases: 15.4(3)S6.1 15.4(3)S6.2 15.5(3)S2.2 15.5(3)S3 15.6(0.22)S0.23 15.6(1)S2 16.2(0.295) 16.3(0.94) 15.5.3S3.
Double free vulnerability in Cisco IOS XE 3.15S, 3.16S, and 3.17S allows remote authenticated users to cause a denial of service (device restart) via a sequence of crafted SNMP read requests, aka Bug ID CSCux13174.
CallManager Express (CME) on Cisco IOS before 15.0(1)XA allows remote authenticated users to cause a denial of service (device crash) by using an extension mobility (EM) phone to interact with the menu for SNR number changes, aka Bug ID CSCta63555.
Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote authenticated users to cause a denial of service (device crash) via a high volume of IPsec traffic, aka Bug ID CSCsx52748.
Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote authenticated users to cause a denial of service (device reload) via crafted configuration commands in an HTTP request, aka Bug ID CSCux82523.
Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allows remote authenticated users to cause a denial of service (traceback) by establishing many IPsec L2L tunnels from remote peer IP addresses, aka Bug ID CSCso15583.
Cisco IOS XE 3.15S and 3.16S on cBR-8 Converged Broadband Router devices allows remote authenticated users to cause a denial of service (NULL pointer dereference and card restart) via a crafted SNMP request, aka Bug ID CSCuu68862.
Cisco Adaptive Security Appliance (ASA) Software 9.0 through 9.5.1 mishandles IPsec error processing, which allows remote authenticated users to cause a denial of service (memory consumption) via crafted (1) LAN-to-LAN or (2) Remote Access VPN tunnel packets, aka Bug ID CSCuv70576.
Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware through 1.2.1.4, RV130W devices with firmware through 1.0.2.7, and RV215W devices with firmware through 1.3.0.7 allows remote authenticated users to cause a denial of service (device reload) via a crafted HTTP request, aka Bug ID CSCux86669.
Cisco IOS before 12.2(33)SXI allows remote authenticated users to cause a denial of service (device reboot).
Cisco IOS 15.5(3)M and 15.6(1)T0a on Cisco 1000 Connected Grid routers allows remote authenticated users to cause a denial of service (device reload) via an SNMP request for unspecified BRIDGE MIB OIDs, aka Bug ID CSCux89878.
A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.
Cisco IOS 12.0 through 12.4, when IP-based tunnels and the Cisco Express Forwarding feature are enabled, allows remote attackers to cause a denial of service (device reload) via a malformed packet that is not properly handled during switching from one tunnel to a second tunnel, aka Bug IDs CSCsh97579 and CSCsq31776.
Unspecified vulnerability in the SNMPv2c implementation in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.3) and Cisco ACE 4710 Application Control Engine Appliance before A3(2.1) allows remote attackers to cause a denial of service (device reload) via a crafted SNMPv1 packet.
Unspecified vulnerability in Cisco Wireless LAN Controller (WLC) software 4.2 before 4.2.209.0; 4.2M before 4.2.207.54M; 5.0, 5.1, and 6.0 before 6.0.196.0; and 5.2 before 5.2.193.11 allows remote authenticated users to cause a denial of service (device reload) via crafted HTTP packets that trigger invalid arguments to the emweb component, aka Bug ID CSCtd16938.
The Supervisor 1.0.0.0 and 1.0.0.1 in Cisco Integrated Management Controller (IMC) before 2.0(9) allows remote authenticated users to cause a denial of service (IP interface outage) via crafted parameters in an HTTP request, aka Bug ID CSCuv38286.
The XML parser in the management interface in Cisco Adaptive Security Appliance (ASA) Software 8.4 allows remote authenticated users to cause a denial of service (device crash) via a crafted XML document, aka Bug ID CSCut14223.
Cisco Email Security Appliance (ESA) 8.5.6-106 and 9.6.0-042 allows remote authenticated users to cause a denial of service (file-descriptor consumption and device reload) via crafted HTTP requests, aka Bug ID CSCuw32211.
The SNMP implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4(7) and 8.6(1.2) allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests during a time of high network traffic, aka Bug ID CSCul02601.
Cisco IOS 15.5S and IOS XE allow remote authenticated users to cause a denial of service (device crash) by leveraging knowledge of the RADIUS secret and sending crafted RADIUS packets, aka Bug ID CSCur21348.
The RADIUS implementation in Cisco IOS and IOS XE allows remote attackers to cause a denial of service (device reload) via crafted IPv6 Attributes in Access-Accept packets, aka Bug IDs CSCur84322 and CSCur27693.
The SIP implementation in Cisco Unified Communications Manager (CM) 8.6(.2) and earlier allows remote authenticated users to cause a denial of service (process crash) via a crafted SIP message that is not properly handled during processing of an XML document, aka Bug ID CSCtq76428.
Cisco IOS allows remote authenticated users to cause a denial of service (device reload) via malformed IPsec packets, aka Bug ID CSCui79745.
The SNMP module in Cisco IOS XE 3.5E allows remote authenticated users to cause a denial of service (device reload) by polling frequently, aka Bug ID CSCug65204.
Cisco Intrusion Prevention System (IPS) Software allows remote attackers to cause a denial of service (MainApp process outage) via malformed SNMP packets, aka Bug IDs CSCum52355 and CSCul49309.
A vulnerability in the implementation of a specific CLI command and the associated Simple Network Management Protocol (SNMP) MIB for Cisco NX-OS (in standalone NX-OS mode) on Cisco Nexus 3000 and 9000 Series Switches could allow an authenticated, remote attacker to exhaust system memory on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect implementation of the CLI command, resulting in a failure to free all allocated memory upon completion. An attacker could exploit this vulnerability by authenticating to the affected device and repeatedly issuing a specific CLI command or sending a specific SNMP poll request for a specific Object Identifier (OID). A successful exploit could allow the attacker to cause the IP routing process to restart or to cause a device reset, resulting in a DoS condition. Cisco Bug IDs: CSCvf23136.
A vulnerability in the password change function of Cisco Prime Collaboration Provisioning could allow an authenticated, remote attacker to cause the system to become inoperable. The vulnerability is due to insufficient validation of a password change request. An attacker could exploit this vulnerability by changing a specific administrator account password. A successful exploit could allow the attacker to cause the affected device to become inoperable, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.2 and prior. Cisco Bug IDs: CSCvd86586.
A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuw99630, CSCvg71290, CSCvj67977.
A vulnerability in the Simple Network Management Protocol (SNMP) subsystem communication channel through the Cisco 550X Series Stackable Managed Switches could allow an authenticated, remote attacker to cause the device to reload unexpectedly, causing a denial of service (DoS) condition. The device nay need to be manually reloaded to recover. The vulnerability is due to lack of proper input throttling of ingress SNMP traffic over an internal interface. An attacker could exploit this vulnerability by sending a crafted, heavy stream of SNMP traffic to the targeted device. An exploit could allow the attacker to cause the device to reload unexpectedly, causing a DoS condition. Cisco Bug IDs: CSCvg22135.
The SSL VPN implementation in Cisco IOS 15.3(1)T2 and earlier allows remote authenticated users to cause a denial of service (interface queue wedge) via crafted DTLS packets in an SSL session, aka Bug IDs CSCuh97409 and CSCud90568.
The web framework on Cisco Wireless LAN Controller (WLC) devices does not properly validate configuration parameters, which allows remote authenticated users to cause a denial of service via a crafted HTTP request, aka Bug ID CSCuh81011.
The WebVPN CIFS implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0(.4.1) and earlier allows remote CIFS servers to cause a denial of service (device reload) via a long share list, aka Bug ID CSCuj83344.
A vulnerability in the Cisco Aironet Series Access Points (APs) software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a deadlock condition that may occur when an affected AP attempts to dequeue aggregated traffic that is destined to an attacker-controlled wireless client. An attacker who can successfully transition between multiple Service Set Identifiers (SSIDs) hosted on the same AP while replicating the required traffic patterns could trigger the deadlock condition. A watchdog timer that detects the condition will trigger a reload of the device, resulting in a DoS condition while the device restarts.
A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco NX-OS on the Cisco Nexus 4000 Series Switch could allow an authenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete validation of an SNMP poll request for a specific MIB. An attacker could exploit this vulnerability by sending a specific SNMP poll request to the targeted device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvg10442.
A vulnerability in the web-based management interface of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to cause an affected system to reboot or shut down. The vulnerability is due to insufficient server-side authorization checks. An attacker who is logged in to the web-based management interface as a low-privileged user could exploit this vulnerability by sending a crafted HTTP request. A successful exploit could allow the attacker to use the low-privileged user account to reboot or shut down the affected system.
A vulnerability in the Web Admin Interface of Cisco Meeting Server could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of incoming HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the Web Admin Interface of an affected Cisco Meeting Server. A successful exploit could allow the attacker to restart the system, terminating all ongoing calls and resulting in a DoS condition on the affected product. This vulnerability affects the following releases of Cisco Meeting Server: Acano X-Series, Cisco Meeting Server 1000, Cisco Meeting Server 2000. Cisco Bug IDs: CSCvi48624.
A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application of an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.
A vulnerability in the administrative GUI configuration feature of Cisco Wireless LAN Controller (WLC) Software could allow an aUTHENTICated, remote attacker to cause the device to reload unexpectedly during device configuration when the administrator is using this GUI, causing a denial of service (DoS) condition on an affected device. The attacker would need to have valid administrator credentials on the device. This vulnerability is due to incomplete input validation for unexpected configuration options that the attacker could submit while accessing the GUI configuration menus. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted user input when using the administrative GUI configuration feature. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Software versions prior to 8.3.150.0, 8.5.140.0, 8.8.111.0 are affected by this vulnerability.
The file-upload feature in Cisco Identity Services Engine (ISE) allows remote authenticated users to cause a denial of service (disk consumption and administration-interface outage) by uploading many files, aka Bug ID CSCui67519.
A vulnerability in the software cryptography module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker or an unauthenticated attacker in a man-in-the-middle position to cause an unexpected reload of the device that results in a denial of service (DoS) condition. The vulnerability is due to a logic error in how the software cryptography module handles specific types of decryption errors. An attacker could exploit this vulnerability by sending malicious packets over an established IPsec connection. A successful exploit could cause the device to crash, forcing it to reload. Important: Successful exploitation of this vulnerability would not cause a compromise of any encrypted data. Note: This vulnerability affects only Cisco ASA Software Release 9.16.1 and Cisco FTD Software Release 7.0.0.
Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for MacOS, and Cisco Jabber for mobile platforms could allow an attacker to execute arbitrary programs on the underlying operating system with elevated privileges, access sensitive information, intercept protected network traffic, or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in filesystem usage management for Cisco Firepower Device Manager (FDM) Software could allow an authenticated, remote attacker to exhaust filesystem resources, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to the insufficient management of available filesystem resources. An attacker could exploit this vulnerability by uploading files to the device and exhausting available filesystem resources. A successful exploit could allow the attacker to cause database errors and cause the device to become unresponsive to web-based management. Manual intervention is required to free filesystem resources and return the device to an operational state.
Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for Mac, and Cisco Jabber for mobile platforms could allow an attacker to access sensitive information or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Java Management Extensions (JMX) component of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to an unsecured TCP/IP port. An attacker could exploit this vulnerability by accessing the port and restarting the JMX process. A successful exploit could allow the attacker to cause a DoS condition on an affected system.
A vulnerability in the API of Cisco Meeting Server could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because requests that are sent to the API are not properly validated. An attacker could exploit this vulnerability by sending a malicious request to the API. A successful exploit could allow the attacker to cause all participants on a call to be disconnected, resulting in a DoS condition.
Multiple vulnerabilities in Cisco SD-WAN vEdge Software could allow an attacker to execute arbitrary code as the root user or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the web UI of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to inject arbitrary commands on an affected system and cause a denial of service (DoS) condition. This vulnerability is due to improper input validation of user-supplied input to the device template configuration. An attacker could exploit this vulnerability by submitting crafted input to the device template configuration. A successful exploit could allow the attacker to cause a DoS condition on the affected system.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
A vulnerability in the REST API of Cisco Managed Services Accelerator (MSX) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the way that the affected software logs certain API requests. An attacker could exploit this vulnerability by sending a flood of crafted API requests to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
Cisco Unified Communications Domain Manager does not properly allocate memory for GET and POST requests, which allows remote authenticated users to cause a denial of service (memory consumption and process crash) via crafted requests to the management interface, aka Bug ID CSCud22922.
A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.