A vulnerability in the ConfD CLI and the Cisco Crosswork Network Services Orchestrator CLI could allow an authenticated, low-privileged, local attacker to read and write arbitrary files as root on the underlying operating system. This vulnerability is due to improper authorization enforcement when specific CLI commands are used. An attacker could exploit this vulnerability by executing an affected CLI command with crafted arguments. A successful exploit could allow the attacker to read or write arbitrary files on the underlying operating system with the privileges of the root user.
A vulnerability in the CLI of the Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit this vulnerability, the attacker must have read-only or higher privileges on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.
A vulnerability in the cluster backup feature of Cisco Secure Firewall Management Center (FMC) Software, formerly Firepower Management Center Software, could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. This vulnerability is due to insufficient validation of user data that is supplied through the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to execute arbitrary operating system commands on the affected device. To exploit this vulnerability, an attacker would need valid credentials for a user account with at least the role of Network Administrator. In addition, the attacker would need to persuade a legitimate user to initiate a cluster backup on the affected device.
A vulnerability in the web-based management interface of Cisco ThousandEyes Enterprise Agent, Virtual Appliance installation type, could allow an authenticated, remote attacker to perform a command injection and elevate privileges to root. This vulnerability is due to insufficient validation of user-supplied input for the web interface. An attacker could exploit this vulnerability by sending a crafted HTTP packet to the affected device. A successful exploit could allow the attacker to execute arbitrary commands and elevate privileges to root.
A vulnerability in the web-based management interface of Cisco Small Business 100, 300, and 500 Series Wireless APs could allow an authenticated, remote attacker to perform command injection attacks against an affected device. In order to exploit this vulnerability, the attacker must have valid administrative credentials for the device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system.
A vulnerability in the web-based management interface of Cisco ATA 190 Multiplatform Series Analog Telephone Adapter firmware could allow an authenticated, remote attacker with high privileges to execute arbitrary commands as the root user on the underlying operating system. This vulnerability is due to a lack of input sanitization in the web-based management interface. An attacker could exploit this vulnerability by sending a malicious request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user.
Cisco WebEx Meetings Server 2.6 allows remote attackers to execute arbitrary commands by injecting these commands into an application script, aka Bug ID CSCuy83130.
Cisco Unified Computing System (UCS) Central Software 1.3(1b) and earlier allows remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuv33856.
The Device Manager GUI in Cisco Application Control Engine (ACE) 4710 A5 before A5(3.1) allows remote authenticated users to bypass intended RBAC restrictions and execute arbitrary CLI commands with admin privileges via an unspecified parameter in a POST request, aka Bug ID CSCul84801.
The CLI in Cisco Prime Collaboration 9.0 and 11.0 allows local users to execute arbitrary OS commands as root by leveraging administrator privileges, aka Bug ID CSCux69286.
A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.
The CLI command parser on Cisco RV110W, RV130W, and RV215W devices allows local users to execute arbitrary shell commands as an administrator via crafted parameters, aka Bug IDs CSCuv90134, CSCux58161, and CSCux73567.
An unspecified script in the web interface in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows remote authenticated users to execute arbitrary OS commands via crafted parameters, aka Bug ID CSCux10622.
An unspecified CGI script in Cisco FX-OS before 1.1.2 on Firepower 9000 devices and Cisco Unified Computing System (UCS) Manager before 2.2(4b), 2.2(5) before 2.2(5a), and 3.0 before 3.0(2e) allows remote attackers to execute arbitrary shell commands via a crafted HTTP request, aka Bug ID CSCur90888.
The Management I/O (MIO) component in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows local users to execute arbitrary OS commands as root via crafted CLI input, aka Bug ID CSCux10578.
The admin web interface in Cisco AsyncOS 8.x before 8.0.8-113, 8.1.x and 8.5.x before 8.5.3-051, 8.6.x and 8.7.x before 8.7.0-171-LD, and 8.8.x before 8.8.0-085 on Web Security Appliance (WSA) devices allows remote authenticated users to obtain root privileges via crafted certificate-generation arguments, aka Bug ID CSCus83445.
A vulnerability in the Sourcefire tunnel control channel protocol in Cisco Firepower System Software running on Cisco Firepower Threat Defense (FTD) sensors could allow an authenticated, local attacker to execute specific CLI commands with root privileges on the Cisco Firepower Management Center (FMC), or through Cisco FMC on other Firepower sensors and devices that are controlled by the same Cisco FMC. To send the commands, the attacker must have root privileges for at least one affected sensor or the Cisco FMC. The vulnerability exists because the affected software performs insufficient checks for certain CLI commands, if the commands are executed via a Sourcefire tunnel connection. An attacker could exploit this vulnerability by authenticating with root privileges to a Firepower sensor or Cisco FMC, and then sending specific CLI commands to the Cisco FMC or through the Cisco FMC to another Firepower sensor via the Sourcefire tunnel connection. A successful exploit could allow the attacker to modify device configurations or delete files on the device that is running Cisco FMC Software or on any Firepower device that is managed by Cisco FMC.
The diagnostics subsystem in the administrative web interface on Cisco Virtualization Experience (aka VXC) Client 6215 devices with firmware 11.2(27.4) allows local users to gain privileges for OS command execution via a crafted option value, aka Bug ID CSCug54412.
Cisco Wireless LAN Controller (WLC) devices with software 7.0(240.0) allow local users to execute arbitrary OS commands in a privileged context via crafted CLI commands, aka Bug ID CSCuj39474.
The boot implementation on Cisco ASR 5000 and 5500 devices with software 14.0 allows local users to execute arbitrary Linux commands by leveraging administrative privileges for storage of these commands in a Compact Flash (CF) file, aka Bug ID CSCuu75278.
Cisco UCS Central Software 1.2(1a) allows local users to gain privileges for OS command execution via a crafted CLI parameter, aka Bug ID CSCut32795.
The Manager component in Cisco Unified Computing System (UCS) 2.2(3b) on B Blade Server devices allows local users to gain privileges for executing arbitrary CLI commands by leveraging access to the subordinate fabric interconnect, aka Bug ID CSCut32778.
The CLI parser in Cisco NX-OS 4.1(2)E1(1), 6.2(11b), 6.2(12), 7.2(0)ZZ(99.1), 7.2(0)ZZ(99.3), and 9.1(1)SV1(3.1.8) on Nexus devices allows local users to execute arbitrary OS commands via crafted characters in a filename, aka Bug IDs CSCuv08491, CSCuv08443, CSCuv08480, CSCuv08448, CSCuu99291, CSCuv08434, and CSCuv08436.
A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.
A certain Cisco JAR file, as distributed in Cache Cleaner in Cisco Secure Desktop (CSD), allows remote attackers to execute arbitrary commands via a crafted web site, aka Bug ID CSCup83001.
A vulnerability in the Intelligent Platform Management Interface (IPMI) of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of user-supplied commands. An attacker who has administrator privileges and access to the network where the IPMI resides could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to gain root privileges on the affected device.
A vulnerability in the local-mgmt CLI command of the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to perform a command injection attack. More Information: CSCvb61394 CSCvb86816. Known Affected Releases: 2.0(1.68) 3.1(1k)A. Known Fixed Releases: 92.2(1.101) 92.1(1.1658) 2.0(1.115).
A vulnerability in the web-based management interface of Cisco IOS XE Software could allow an authenticated, low-privileged, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web-based management interface. A successful exploit could allow the attacker to read limited files from the underlying operating system or clear the syslog and licensing logs on the affected device.
Cisco IOS 15.0, 15.1, 15.2, and 15.4 and IOS XE 3.3.xSE before 3.3.2SE, 3.3.xXO before 3.3.1XO, 3.5.xE before 3.5.2E, and 3.11.xS before 3.11.1S allow remote attackers to cause a denial of service (device reload) via malformed mDNS packets, aka Bug ID CSCul90866.
Cisco IOS 12.4 and 15.0 through 15.4 and IOS XE 3.1.xS, 3.2.xS, 3.3.xS, 3.4.xS, 3.5.xS, 3.6.xS, and 3.7.xS before 3.7.6S; 3.8.xS, 3.9.xS, and 3.10.xS before 3.10.1S; and 3.11.xS before 3.12S allow remote attackers to cause a denial of service (device reload) via a crafted SIP message, aka Bug ID CSCul46586.
The web framework in Cisco Identity Services Engine (ISE) 1.0 and 1.1.0 before 1.1.0.665-5, 1.1.1 before 1.1.1.268-7, 1.1.2 before 1.1.2.145-10, 1.1.3 before 1.1.3.124-7, 1.1.4 before 1.1.4.218-7, and 1.2 before 1.2.0.899-2 allows remote authenticated users to execute arbitrary commands via a crafted session on TCP port 443, aka Bug ID CSCuh81511.
Directory traversal vulnerability in processImageSave.jsp in DCNM-SAN Server in Cisco Prime Data Center Network Manager (DCNM) before 6.2(1) allows remote attackers to write arbitrary files via the chartid parameter, aka Bug IDs CSCue77035 and CSCue77036. NOTE: this can be leveraged to execute arbitrary commands by using the JBoss autodeploy functionality.
Memory leak in Cisco IOS 15.0, 15.1, 15.2, and 15.4 and IOS XE 3.3.xSE before 3.3.2SE, 3.3.xXO before 3.3.1XO, 3.5.xE before 3.5.2E, and 3.11.xS before 3.11.1S allows remote attackers to cause a denial of service (memory consumption, and interface queue wedge or device reload) via malformed mDNS packets, aka Bug ID CSCuj58950.
The Cisco WAP4410N access point with firmware through 2.0.6.1, WRVS4400N router with firmware 1.x through 1.1.13 and 2.x through 2.0.2.1, and RVS4000 router with firmware through 2.0.3.2 allow remote attackers to read credential and configuration data, and execute arbitrary commands, via requests to the test interface on TCP port 32764, aka Bug IDs CSCum37566, CSCum43693, CSCum43700, and CSCum43685.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
A vulnerability in the web-based management interface of Cisco Prime Infrastructure and Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with the permissions of a special non-root user. In this way, an attacker could take control of the affected system, which would allow them to obtain and alter sensitive data. The attacker could also affect the devices that are managed by the affected system by pushing arbitrary configuration files, retrieving device credentials and confidential information, and ultimately undermining the stability of the devices, causing a denial of service (DoS) condition.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.
Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.
A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to perform a command injection attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to a configuration command. An attacker could exploit this vulnerability by including malicious input during the execution of this command. A successful exploit could allow a non-privileged attacker authenticated in the restricted CLI to execute arbitrary commands on the underlying operating system (OS) with root privileges.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.
Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
A vulnerability in the Command Runner tool of Cisco DNA Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation by the Command Runner tool. An attacker could exploit this vulnerability by providing crafted input during command execution or via a crafted command runner API call. A successful exploit could allow the attacker to execute arbitrary CLI commands on devices managed by Cisco DNA Center.
A vulnerability in a CLI command of Cisco IOS XR Software for the Cisco 8000 Series Routers and Network Convergence System 540 Series Routers running NCS540L software images could allow an authenticated, local attacker to elevate their privilege to root. To exploit this vulnerability, an attacker would need to have a valid account on an affected device. The vulnerability is due to insufficient validation of command line arguments. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the prompt. A successful exploit could allow an attacker with low-level privileges to escalate their privilege level to root.
A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary code with root privileges on the underlying operating system of an affected device. The vulnerability exists because the affected software improperly sanitizes values that are parsed from a specific configuration file. An attacker could exploit this vulnerability by tampering with a specific configuration file and then sending an API call. A successful exploit could allow the attacker to inject arbitrary code that would be executed on the underlying operating system of the affected device. To exploit this vulnerability, the attacker would need to have a privileged set of credentials to the device.