There is a command injection vulnerability in CMA service module of FusionCompute 6.3.0, 6.3.1, 6.5.0 and 8.0.0 when processing the default certificate file. The software constructs part of a command using external special input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands to the system.

FusionSphere V100R006C00SPC102(NFV) has a command injection vulnerability. An authenticated, remote attacker could craft packets with malicious strings and send them to a target device. Successful exploit could allow the attacker to launch a command injection attack and execute system commands.

FusionCompute 8.0.0 have a command injection vulnerability. The software does not sufficiently validate certain parameters post from user, successful exploit could allow an authenticated attacker to launch a command injection attack.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

Huawei OceanStor 5600 V3 with V300R003C00C10 and earlier versions allows attackers with administrator privilege to inject a command into a specific command's parameters, and run this injected command with root privilege.

ManageOne versions 6.5.1.1.B010, 6.5.1.1.B020, 6.5.1.1.B030, 6.5.1.1.B040, ,6.5.1.1.B050, 8.0.0 and 8.0.1 have a command injection vulnerability. An attacker with high privileges may exploit this vulnerability through some operations on the plug-in component. Due to insufficient input validation of some parameters, the attacker can exploit this vulnerability to inject commands to the target device.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

Huawei Policy Center with software before V100R003C10SPC020 allows remote authenticated users to gain privileges and cause a denial of service (system crash) via a crafted URL.

The iBMC (Intelligent Baseboard Management Controller) of some Huawei servers have a JSON injection vulnerability due to insufficient input validation. An authenticated, remote attacker can launch a JSON injection to modify the password of administrator. Successful exploit may allow attackers to obtain the management privilege of the system.

The iBMC (Intelligent Baseboard Management Controller) of some Huawei servers have a JSON injection vulnerability due to insufficient input validation. An authenticated, remote attacker can launch a JSON injection to modify the password of administrator. Successful exploit may allow attackers to obtain the management privilege of the system.

Huawei Seco Versatile Security Manager (VSM) before V200R002C00SPC300 allows remote authenticated users to gain privileges via a certain change to a group configuration setting.

There is an improper interface design vulnerability in Huawei product. A module interface of the impated product does not deal with some operations properly. Attackers can exploit this vulnerability to perform malicious operatation to compromise module service. (Vulnerability ID: HWPSIRT-2020-05010) This vulnerability has been assigned a Common Vulnerabilities and Exposures (CVE) ID: CVE-2020-9236.

There is a signature management vulnerability in some huawei products. An attacker can forge signature and bypass the signature check. During firmware update process, successful exploit this vulnerability can cause the forged system file overwrite the correct system file. Affected product versions include:iManager NetEco V600R010C00CP2001,V600R010C00CP2002,V600R010C00SPC100,V600R010C00SPC110,V600R010C00SPC120,V600R010C00SPC200,V600R010C00SPC210,V600R010C00SPC300;iManager NetEco 6000 V600R009C00SPC100,V600R009C00SPC110,V600R009C00SPC120,V600R009C00SPC190,V600R009C00SPC200,V600R009C00SPC201,V600R009C00SPC202,V600R009C00SPC210.

Some Huawei smart speakers have a memory overflow vulnerability. Successful exploitation of this vulnerability may cause certain functions to fail.

The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.

There is a system command injection vulnerability in BiSheng-WNM FW 3.0.0.325. Successful exploitation could allow attackers to gain higher privileges.

The login page of the server on Huawei FusionServer rack servers RH2288 V3 with software before V100R003C00SPC603, RH2288H V3 with software before V100R003C00SPC503, XH628 V3 with software before V100R003C00SPC602, RH1288 V3 with software before V100R003C00SPC602, RH2288A V2 with software before V100R002C00SPC701, RH1288A V2 with software before V100R002C00SPC502, RH8100 V3 with software before V100R003C00SPC110, CH222 V3 with software before V100R001C00SPC161, CH220 V3 with software before V100R001C00SPC161, and CH121 V3 with software before V100R001C00SPC161 allows remote attackers to bypass access restrictions and enter commands via unspecified parameters, as demonstrated by a "user creation command."

Command injection vulnerability in the distributed file system module. Successful exploitation of this vulnerability may cause variables in the sock structure to be modified.

The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.

Huawei iManager NetEco with software V600R008C00 and V600R008C10 has a command injection vulnerability. An authenticated, remote attacker could exploit this vulnerability to send malicious packets to a target device. Successful exploit could enable a low privileged user to execute commands that a high privileged user could execute, causing the files to be tampered with or deleted.

The FusionSphere OpenStack V100R006C00SPC102(NFV) has a command injection vulnerability. Due to the insufficient input validation on one port, an authenticated, local attacker may exploit the vulnerability to gain root privileges by sending message with malicious commands.

FusionSphere OpenStack V100R006C00SPC102(NFV)has a command injection vulnerability. Due to lack of validation, an attacker with high privilege may inject malicious code into some module of the affected products, causing code execution.

B2368-22 V100R001C00;B2368-57 V100R001C00;B2368-66 V100R001C00 have a command injection vulnerability. An attacker with high privileges may exploit this vulnerability through some operations on the LAN. Due to insufficient input validation of some parameters, the attacker can exploit this vulnerability to inject commands to the target device.

The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.

Huawei FusionCompute versions 6.5.1 and 8.0.0 have a command injection vulnerability. An authenticated, remote attacker can craft specific request to exploit this vulnerability. Due to insufficient verification, this could be exploited to cause the attackers to obtain higher privilege.

Some Huawei products have a command injection vulnerability. Due to insufficient input validation, an attacker with high privilege may inject some malicious codes in some files of the affected products. Successful exploit may cause command injection.Affected product versions include:NIP6300 versions V500R001C30,V500R001C60;NIP6600 versions V500R001C30,V500R001C60;Secospace USG6300 versions V500R001C30,V500R001C60;Secospace USG6500 versions V500R001C30,V500R001C60;Secospace USG6600 versions V500R001C30,V500R001C60;USG9500 versions V500R001C30,V500R001C60.

There is a command injection vulnerability in Huawei terminal printer product. Successful exploitation could result in the highest privileges of the printer. (Vulnerability ID: HWPSIRT-2022-51773) This vulnerability has been assigned a Common Vulnerabilities and Exposures (CVE) ID: CVE-2022-32203.

FusionSphere OpenStack with software V100R006C00 and V100R006C10RC2 has two command injection vulnerabilities due to the insufficient input validation on one port. An attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.

VCM5010 with software versions earlier before V100R002C50SPC100 has a command injection vulnerability. This is due to insufficient validation of user's input. An authenticated attacker could launch a command injection attack.

FusionSphere OpenStack with software V100R006C00 and V100R006C10RC2 has two command injection vulnerabilities due to the insufficient input validation on one port. An attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.

The Keyguard application in ALE-L02C635B140 and earlier versions,ALE-L02C636B140 and earlier versions,ALE-L21C10B150 and earlier versions,ALE-L21C185B200 and earlier versions,ALE-L21C432B214 and earlier versions,ALE-L21C464B150 and earlier versions,ALE-L21C636B200 and earlier versions,ALE-L23C605B190 and earlier versions,ALE-TL00C01B250 and earlier versions,ALE-UL00C00B250 and earlier versions,MT7-L09C605B325 and earlier versions,MT7-L09C900B339 and earlier versions,MT7-TL10C900B339 and earlier versions,CRR-CL00C92B172 and earlier versions,CRR-L09C432B180 and earlier versions,CRR-TL00C01B172 and earlier versions,CRR-UL00C00B172 and earlier versions,CRR-UL20C432B171 and earlier versions,GRA-CL00C92B230 and earlier versions,GRA-L09C432B222 and earlier versions,GRA-TL00C01B230SP01 and earlier versions,GRA-UL00C00B230 and earlier versions,GRA-UL00C10B201 and earlier versions,GRA-UL00C432B220 and earlier versions,H60-L04C10B523 and earlier versions,H60-L04C185B523 and earlier versions,H60-L04C636B527 and earlier versions,H60-L04C900B530 and earlier versions,PLK-AL10C00B220 and earlier versions,PLK-AL10C92B220 and earlier versions,PLK-CL00C92B220 and earlier versions,PLK-L01C10B140 and earlier versions,PLK-L01C185B130 and earlier versions,PLK-L01C432B187 and earlier versions,PLK-L01C432B190 and earlier versions,PLK-L01C432B190 and earlier versions,PLK-L01C636B130 and earlier versions,PLK-TL00C01B220 and earlier versions,PLK-TL01HC01B220 and earlier versions,PLK-UL00C17B220 and earlier versions,ATH-AL00C00B210 and earlier versions,ATH-AL00C92B200 and earlier versions,ATH-CL00C92B210 and earlier versions,ATH-TL00C01B210 and earlier versions,ATH-TL00HC01B210 and earlier versions,ATH-UL00C00B210 and earlier versions,RIO-AL00C00B220 and earlier versions,RIO-CL00C92B220 and earlier versions,RIO-TL00C01B220 and earlier versions,RIO-UL00C00B220 and earlier versions have a privilege elevation vulnerability. An attacker may exploit it to launch command injection in order to gain elevated privileges.

The laser command injection vulnerability exists on AIS-BW80H-00 versions earlier than AIS-BW80H-00 9.0.3.4(H100SP13C00). The devices cannot effectively defend against external malicious interference. Attackers need the device to be visually exploitable and successful triggering of this vulnerability could execute voice commands on the device.

There is a system command injection vulnerability in BiSheng-WNM FW 3.0.0.325. A Huawei printer has a system command injection vulnerability. Successful exploitation could lead to remote code execution.

The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR‑818L up to 1.05B01. This issue affects the function getenv of the file /htdocs/cgibin of the component ssdpcgi. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

The GMS ViewPoint (GMSVP) web application in Dell SonicWALL GMS, Analyzer, and UMA EM5000 7.2, 8.0, and 8.1 before Hotfix 168056 allows remote authenticated users to execute arbitrary commands via vectors related to configuration input.

Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.

flu.cgi in the web interface on SysLINK SL-1000 Machine-to-Machine (M2M) Modular Gateway devices with firmware before 01A.8 allows remote authenticated users to execute arbitrary commands via the 5066 (aka dnsmasq) parameter.

On Linksys WAG54G2 1.00.10 devices, there is authenticated command injection via shell metacharacters in the setup.cgi c4_ping_ipaddr variable.

Possible Elevation of Privilege Vulnerability in iManager has been discovered in OpenText™ iManager. This impacts all versions before 3.2.5

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Liman Central Management System Liman MYS (HTTP/Controllers, CronMail, Jobs modules) allows Command Injection.This issue affects Liman Central Management System: from 1.7.0 before 1.8.3-462.

Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. To exploit these vulnerabilities, the attacker must have valid device credentials, but does not need Administrator privileges. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device, including on the underlying operating system, which could also affect the availability of the device.

A vulnerability was found in TOTOLINK T6 4.1.5cu.748_B20211015. It has been declared as critical. This vulnerability affects the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi of the component HTTP POST Request Handler. The manipulation of the argument command leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in Tenda O3V2 1.0.0.12(3880). This vulnerability affects the function fromNetToolGet of the file /goform/setPingInfo of the component httpd. The manipulation of the argument domain leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in D-Link DI-7300G+ 19.12.25A1. Affected by this issue is some unknown functionality of the file in proxy_client.asp. The manipulation of the argument proxy_srv/proxy_lanport/proxy_lanip/proxy_srvport leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

General Electric (GE) Industrial Solutions UPS SNMP/Web Adapter devices with firmware before 4.8 allow remote authenticated users to execute arbitrary commands via unspecified vectors.

A vulnerability was found in D-Link DIR-645 up to 1.05B01 and classified as critical. This issue affects the function ssdpcgi_main of the file /htdocs/cgibin of the component ssdpcgi. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in TRENDnet TEW-652BRP 3.04B01. This issue affects some unknown processing of the file get_set.ccp of the component Web Management Interface. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-219935.

An authenticated remote code execution vulnerability exists in the AOS-CX Network Analytics Engine. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system, leading to a complete compromise of the switch running AOS-CX.