In Contiki 3.0, potential nonterminating acknowledgment loops exist in the Telnet service. When the negotiated options are already disabled, servers still respond to DONT and WONT requests with WONT or DONT commands, which may lead to infinite acknowledgment loops, denial of service, and excessive CPU consumption.

An issue was discovered in Contiki through 3.0. An infinite loop exists in the uIP TCP/IP stack component when processing IPv6 extension headers in ext_hdr_options_process in net/ipv6/uip6.c.

An issue was discovered in Contiki through 3.0. An infinite loop exists in the uIP TCP/IP stack component when handling RPL extension headers of IPv6 network packets in rpl_remove_header in net/rpl/rpl-ext-header.c.

In Contiki 3.0, a buffer overflow in the Telnet service allows remote attackers to cause a denial of service because the ls command is mishandled when a directory has many files with long names.

An issue was discovered in Contiki through 3.0. When sending an ICMPv6 error message because of invalid extension header options in an incoming IPv6 packet, there is an attempt to remove the RPL extension headers. Because the packet length and the extension header length are unchecked (with respect to the available data) at this stage, and these variables are susceptible to integer underflow, it is possible to construct an invalid extension header that will cause memory corruption issues and lead to a Denial-of-Service condition. This is related to rpl-ext-header.c.

In Contiki 3.0, Telnet option negotiation is mishandled. During negotiation between a server and a client, the server may fail to give the WILL/WONT or DO/DONT response for DO and WILL commands because of improper handling of exception condition, which leads to property violations and denial of service. Specifically, a server sometimes sends no response, because a fixed buffer space is available for all responses and that space may have been exhausted.

An issue was discovered in uIP through 1.0, as used in Contiki and Contiki-NG. Domain name parsing lacks bounds checks, allowing an attacker to corrupt memory with crafted DNS packets.

An issue was discovered in uIP 1.0, as used in Contiki 3.0 and other products. The code that parses incoming DNS packets does not validate that domain names present in the DNS responses have '\0' termination. This results in errors when calculating the offset of the pointer that jumps over domain name bytes in DNS response packets when a name lacks this termination, and eventually leads to dereferencing the pointer at an invalid/arbitrary address, within newdata() and parse_name() in resolv.c.

An issue was discovered in Contiki through 3.0. An Out-of-Bounds Read vulnerability exists in the uIP TCP/IP Stack component when calculating the checksums for IP packets in upper_layer_chksum in net/ipv4/uip.c.

An issue was discovered in Contiki through 3.0. A memory corruption vulnerability exists in the uIP TCP/IP stack component when handling RPL extension headers of IPv6 network packets in rpl_remove_header in net/rpl/rpl-ext-header.c.

An issue was discovered in Contiki-NG through 4.3 and Contiki through 3.0. A buffer overflow is present due to an integer underflow during 6LoWPAN fragment processing in the face of truncated fragments in os/net/ipv6/sicslowpan.c. This results in accesses of unmapped memory, crashing the application. An attacker can cause a denial-of-service via a crafted 6LoWPAN frame.

In Apache Thrift all versions up to and including 0.12.0, a server or client may run into an endless loop when feed with specific input data. Because the issue had already been partially fixed in version 0.11.0, depending on the installed version it affects only certain language bindings.

In Wireshark 2.4.0 to 2.4.5, the CQL dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-cql.c by checking for a nonzero number of columns.

Stack consumption vulnerability in the dissect_ber_choice function in the BER dissector in Wireshark 1.2.x through 1.2.15 and 1.4.x through 1.4.4 might allow remote attackers to cause a denial of service (infinite loop) via vectors involving self-referential ASN.1 CHOICE values.

avahi-core/socket.c in avahi-daemon in Avahi before 0.6.29 allows remote attackers to cause a denial of service (infinite loop) via an empty mDNS (1) IPv4 or (2) IPv6 UDP packet to port 5353. NOTE: this vulnerability exists because of an incorrect fix for CVE-2010-2244.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-ber.c had an infinite loop that was addressed by validating a length.

An infinite loop in SMLLexer in Pygments versions 1.5 to 2.7.3 may lead to denial of service when performing syntax highlighting of a Standard ML (SML) source file, as demonstrated by input that only contains the "exception" keyword.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-rpcrdma.c had an infinite loop that was addressed by validating a chunk size.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-usb.c had an infinite loop that was addressed by rejecting short frame header lengths.

Loop with unreachable exit condition may occur due to improper handling of unsupported input in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Voice & Music, Snapdragon Wearables

It was discovered that a programming error in the processing of HTTPS requests in the Apache Tomcat servlet and JSP engine may result in denial of service via an infinite loop. The denial of service is easily achievable as a consequence of backporting a CVE-2016-6816 fix but not backporting the fix for Tomcat bug 57544. Distributions affected by this backporting issue include Debian (before 7.0.56-3+deb8u8 and 8.0.14-1+deb8u7 in jessie) and Ubuntu.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-reload.c had an infinite loop that was addressed by validating a length.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-thread.c had an infinite loop that was addressed by using a correct integer data type.

An error within the "parse_rollei()" function (internal/dcraw_common.cpp) within LibRaw versions prior to 0.19.1 can be exploited to trigger an infinite loop.

Improper file stream access in /desktop_app/file.ajax.php?action=uploadfile in Bitrix24 22.0.300 allows unauthenticated remote attackers to cause denial-of-service via a crafted "tmp_url".

A flaw was found in undertow. This issue makes achieving a denial of service possible due to an unexpected handshake status updated in SslConduit, where the loop never terminates.

Certain WithSecure products allow a Denial of Service because the engine scanner can go into an infinite loop when processing an archive file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, WithSecure Linux Security 64 12.0, WithSecure Linux Protection 12.0, and WithSecure Atlant 1.0.35-1.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-lltd.c had an infinite loop that was addressed by using a correct integer data type.

w3m through 0.5.3 is prone to an infinite recursion flaw in HTMLlineproc0 because the feed_table_block_tag function in table.c does not prevent a negative indent value.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-s7comm.c had an infinite loop that was addressed by correcting off-by-one errors.

OctoRPKI does not limit the depth of a certificate chain, allowing for a CA to create children in an ad-hoc fashion, thereby making tree traversal never end.

When calling bson_utf8_validate on some inputs a loop with an exit condition that cannot be reached may occur, i.e. an infinite loop. This issue affects All MongoDB C Driver versions prior to versions 1.25.0.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-dcm.c had an infinite loop that was addressed by checking for integer wraparound.

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Apache NimBLE.  Specially crafted GATT operation can cause infinite loop in GATT server leading to denial of service in Bluetooth stack or device. This issue affects Apache NimBLE: through 1.6.0. Users are recommended to upgrade to version 1.7.0, which fixes the issue.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-rpki-rtr.c had an infinite loop that was addressed by validating a length field.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-sccp.c had an infinite loop that was addressed by using a correct integer data type.

In Wireshark 2.2.0 to 2.2.12 and 2.4.0 to 2.4.4, the DMP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-dmp.c by correctly supporting a bounded number of Security Categories for a DMP Security Classification.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-openflow_v6.c had an infinite loop that was addressed by validating property lengths.

The Quagga BGP daemon (bgpd) prior to version 1.2.3 has a bug in its parsing of "Capabilities" in BGP OPEN messages, in the bgp_packet.c:bgp_capability_msg_parse function. The parser can enter an infinite loop on invalid capabilities if a Multi-Protocol capability does not have a recognized AFI/SAFI, causing a denial of service.

Transient DOS when NAS receives ODAC criteria of length 1 and type 1 in registration accept OTA.

A flaw was found in libXpm. This issue occurs when parsing a file with a comment not closed; the end-of-file condition will not be detected, leading to an infinite loop and resulting in a Denial of Service in the application linked to the library.

qubes-mirage-firewall (aka Mirage firewall for QubesOS) 0.8.x through 0.8.3 allows guest OS users to cause a denial of service (CPU consumption and loss of forwarding) via a crafted multicast UDP packet (IP address range of 224.0.0.0 through 239.255.255.255).

NLnet Labs Unbound version 1.18.0 up to and including version 1.19.1 contain a vulnerability that can cause denial of service by a certain code path that can lead to an infinite loop. Unbound 1.18.0 introduced a feature that removes EDE records from responses with size higher than the client's advertised buffer size. Before removing all the EDE records however, it would try to see if trimming the extra text fields on those records would result in an acceptable size while still retaining the EDE codes. Due to an unchecked condition, the code that trims the text of the EDE records could loop indefinitely. This happens when Unbound would reply with attached EDE information on a positive reply and the client's buffer size is smaller than the needed space to include EDE records. The vulnerability can only be triggered when the 'ede: yes' option is used; non default configuration. From version 1.19.2 on, the code is fixed to avoid looping indefinitely.

A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.

Due to a mistake in libcurl's WebSocket code, a malicious server can send a particularly crafted packet which makes libcurl get trapped in an endless busy-loop. There is no other way for the application to escape or exit this loop other than killing the thread/process. This might be used to DoS libcurl-using application.

An infinite loop in Open Robotics ros_comm XMLRPC server in ROS Melodic through 1.4.11 and ROS Noetic through1.15.11 allows remote attackers to cause a Denial of Service in ros_comm via a crafted XMLRPC call.

An issue was discovered in the demo/LINUXTCP implementation of cwalter-at freemodbus v.2018-09-12 allowing attackers to reach an infinite loop via a crafted length value for a packet.

ImageMagick is free and open-source software used for editing and manipulating digital images. In versions prior to 7.1.2-0, infinite lines occur when writing during a specific XMP file conversion command. Version 7.1.2-0 fixes the issue.