IBM Security Guardium 10.5 stores user credentials in plain clear text which can be read by a local privileged user. IBM X-Force ID: 215589.
IBM Security Verify Governance, Identity Manager 10.0.1 stores sensitive information including user credentials in plain clear text which can be read by a local privileged user. IBM X-Force ID: 225007.
IBM UrbanCode Deploy (UCD) 6.2.7.15, 7.0.5.10, 7.1.2.6, and 7.2.2.1 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 22106.
IBM Security Guardium Insights 2.0.2 stores user credentials in plain in clear text which can be read by a local privileged user. IBM X-Force ID: 184861.
IBM Security Verify Access Docker 10.0.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 198299
In wlan, there is a possible out of bounds read due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588413; Issue ID: ALPS07588453.
In wlan, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588413; Issue ID: ALPS07588436.
In IOMMU, there is a possible information disclosure due to improper input validation. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: DTV03692061; Issue ID: DTV03692061.
In wlan, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588569; Issue ID: ALPS07628518.
In wlan, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588569; Issue ID: ALPS07588569.
In wlan, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588569; Issue ID: ALPS07588552.
IBM Jazz Reporting Service 7.0.3 stores user credentials in plain clear text which can be read by an admin user. IBM X-Force ID: 283363.
IBM Storage Defender - Resiliency Service 2.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 278748.
A vulnerability was found in vhost_new_msg in drivers/vhost/vhost.c in the Linux kernel, which does not properly initialize memory in messages passed between virtual guests and the host operating system in the vhost/vhost.c:vhost_new_msg() function. This issue can allow local privileged users to read some kernel memory contents when reading from the /dev/vhost-net device file.
NVIDIA GPU and Tegra hardware contain a vulnerability in the internal microcontroller which may allow a user with elevated privileges to gain access to information from unscrubbed registers, which may lead to information disclosure.
NVIDIA GPU and Tegra hardware contain a vulnerability in the internal microcontroller which may allow a user with elevated privileges to gain access to information from unscrubbed memory, which may lead to information disclosure.
IBM Storage Defender - Resiliency Service 2.0.0 through 2.0.9 could allow a privileged user to obtain highly sensitive user credentials from secret keys that are stored in clear text.
In wlan, there is a possible out of bounds read due to an integer overflow. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588383; Issue ID: ALPS07588383.
IBM PowerVM Hypervisor FW950.00 through FW950.90, FW1020.00 through FW1020.40, and FW1030.00 through FW1030.30 could allow a system administrator to obtain sensitive partition information. IBM X-Force ID: 269695.
IBM App Connect Enterprise 12.0.1.0 through 12.0.8.0 contains an unspecified vulnerability that could allow a local privileged user to obtain sensitive information from API logs. IBM X-Force ID: 263833.
IBM Storage Protect 8.1.0.0 through 8.1.19.0 could allow a privileged user to obtain sensitive information from the administrative command line client. IBM X-Force ID: 263456.
IBM Security Verify Bridge 1.0.5.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 196346.
IBM Resilient SOAR V38.0 could allow a local privileged attacker to obtain sensitive information due to improper or nonexisting encryption.IBM X-Force ID: 199239.
IBM Security Verify Governance 10.0, Identity Manager could allow a local privileged user to obtain sensitive information from source code. IBM X-Force ID: 257769.
NVIDIA GPU and Tegra hardware contain a vulnerability in the internal microcontroller which may allow a user with elevated privileges to access debug registers during runtime, which may lead to information disclosure.
In bluetooth driver, there is a possible out of bounds read due to improper input validation. This could lead to local information leak with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07867212; Issue ID: ALPS07867212.
IBM Security Guardium Key Lifecycle Manager 4.1, 4.1.1, 4.2.0, and 4.2.1 stores potentially sensitive information in log files that could be read by a local privileged user.
An out-of-bounds read vulnerability was found in the SR-IPv6 implementation in the Linux kernel. The flaw exists within the processing of seg6 attributes. The issue results from the improper validation of user-supplied data, which can result in a read past the end of an allocated buffer. This flaw allows a privileged local user to disclose sensitive information on affected installations of the Linux kernel.
IBM Cloud Pak System 2.3 could reveal credential information in the HTTP response to a local privileged user. IBM X-Force ID: 191288.
IBM Cloud Pak System 2.3 could allow l local privileged user to disclose sensitive information due to an insecure direct object reference in sell service console for the Platform System Manager. IBM X-Force ID: 191392.
IBM Security Guardium 11.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 174852.
A locking inconsistency issue was discovered in the tty subsystem of the Linux kernel through 5.9.13. drivers/tty/tty_io.c and drivers/tty/tty_jobctrl.c may allow a read-after-free attack against TIOCGSID, aka CID-c8bcd9c5be24.
A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.
A flaw was found in the Linux kernel’s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to cause a 4 byte out-of-bounds read of XFRMA_MTIMER_THRESH when parsing netlink attributes, leading to potential leakage of sensitive heap data to userspace.
A memory disclosure flaw was found in the Linux kernel's ethernet drivers, in the way it read data from the EEPROM of the device. This flaw allows a local user to read uninitialized values from the kernel memory. The highest threat from this vulnerability is to confidentiality.
An issue was discovered in slc_bump in drivers/net/can/slcan.c in the Linux kernel 3.16 through 5.6.2. It allows attackers to read uninitialized can_frame data, potentially containing sensitive information from kernel stack memory, if the configuration lacks CONFIG_INIT_STACK_ALL, aka CID-b9258a2cece4.
A stack information leak flaw was found in s390/s390x in the Linux kernel’s memory manager functionality, where it incorrectly writes to the /proc/sys/vm/cmm_timeout file. This flaw allows a local user to see the kernel data.
A kernel information leak flaw was identified in the scsi_ioctl function in drivers/scsi/scsi_ioctl.c in the Linux kernel. This flaw allows a local attacker with a special user privilege (CAP_SYS_ADMIN or CAP_SYS_RAWIO) to create issues with confidentiality.
IBM Security Guardium Data Encryption (GDE) 3.0.0.2 stores user credentials in plain in clear text which can be read by a local privileged user. IBM X-Force ID: 171831.
IBM Multicloud Manager 3.1.0, 3.1.1, and 3.1.2 ibm-mcm-chart could allow a local attacker with admin privileges to obtain highly sensitive information upon deployment. IBM X-Force ID: 158144.
IBM PureApplication System 2.2.3.0 through 2.2.5.3 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 159242.
IBM FileNet Content Manager 5.5.2 and 5.5.3 in specific configurations, could log the web service user credentials into a log file that could be accessed by an administrator on the local machine. IBM X-Force ID: 166798.
IBM Cloud Private 2.1.0 , 3.1.0, 3.1.1, and 3.1.2 could allow a local privileged user to obtain sensitive OIDC token that is printed to log files, which could be used to log in to the system as another user. IBM X-Force ID: 160512.
A vulnerability was found in the Linux kernel's EBPF verifier when handling internal data structures. Internal memory locations could be returned to userspace. A local attacker with the permissions to insert eBPF code to the kernel can use this to leak internal kernel memory details defeating some of the exploit mitigations in place for the kernel.
IBM Cloud Pak for Data 2.5 could allow a local user with special privileges to obtain highly sensitive information. IBM X-Force ID: 209575.
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in smb2_reconnect_server() The UAF bug is due to smb2_reconnect_server() accessing a session that is already being teared down by another thread that is executing __cifs_put_smb_ses(). This can happen when (a) the client has connection to the server but no session or (b) another thread ends up setting @ses->ses_status again to something different than SES_EXITING. To fix this, we need to make sure to unconditionally set @ses->ses_status to SES_EXITING and prevent any other threads from setting a new status while we're still tearing it down. The following can be reproduced by adding some delay to right after the ipc is freed in __cifs_put_smb_ses() - which will give smb2_reconnect_server() worker a chance to run and then accessing @ses->ipc: kinit ... mount.cifs //srv/share /mnt/1 -o sec=krb5,nohandlecache,echo_interval=10 [disconnect srv] ls /mnt/1 &>/dev/null sleep 30 kdestroy [reconnect srv] sleep 10 umount /mnt/1 ... CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed CIFS: VFS: \\srv Send error in SessSetup = -126 CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed CIFS: VFS: \\srv Send error in SessSetup = -126 general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 Workqueue: cifsiod smb2_reconnect_server [cifs] RIP: 0010:__list_del_entry_valid_or_report+0x33/0xf0 Code: 4f 08 48 85 d2 74 42 48 85 c9 74 59 48 b8 00 01 00 00 00 00 ad de 48 39 c2 74 61 48 b8 22 01 00 00 00 00 74 69 <48> 8b 01 48 39 f8 75 7b 48 8b 72 08 48 39 c6 0f 85 88 00 00 00 b8 RSP: 0018:ffffc900001bfd70 EFLAGS: 00010a83 RAX: dead000000000122 RBX: ffff88810da53838 RCX: 6b6b6b6b6b6b6b6b RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffc02f6878 RDI: ffff88810da53800 RBP: ffff88810da53800 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88810c064000 R13: 0000000000000001 R14: ffff88810c064000 R15: ffff8881039cc000 FS: 0000000000000000(0000) GS:ffff888157c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe3728b1000 CR3: 000000010caa4000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x36/0x90 ? exc_general_protection+0x1c1/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? __list_del_entry_valid_or_report+0x33/0xf0 __cifs_put_smb_ses+0x1ae/0x500 [cifs] smb2_reconnect_server+0x4ed/0x710 [cifs] process_one_work+0x205/0x6b0 worker_thread+0x191/0x360 ? __pfx_worker_thread+0x10/0x10 kthread+0xe2/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>
IBM Security Guardium Insights 2.0.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 184747.
IBM Security Guardium Insights 2.0.2 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 184836.
This vulnerability allows local attackers to disclose sensitive information on affected installations of the Linux Kernel 6.0-rc2. An attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the nft_osf_eval function. The issue results from the lack of proper initialization of memory prior to accessing it. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the kernel. Was ZDI-CAN-18540.
IBM Security Verify Access Docker 10.0.0 could reveal highly sensitive information to a local privileged user. IBM X-Force ID: 197980.