A vulnerability in the privilege management functionality of all Cisco BroadWorks server types could allow an authenticated, local attacker to elevate privileges to root on an affected system. This vulnerability is due to incorrect implementation of user role permissions. An attacker could exploit this vulnerability by authenticating to the application as a user with the BWORKS or BWSUPERADMIN role and issuing crafted commands on an affected system. A successful exploit could allow the attacker to execute commands beyond the sphere of their intended access level, including initiating installs or running operating system commands with elevated permissions. There are workarounds that address this vulnerability.

A vulnerability in the Embedded Service Router (ESR) of Cisco ISE could allow an authenticated, local attacker to read, write, or delete arbitrary files on the underlying operating system and escalate their privileges to root. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to improper privilege management in the ESR console. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to elevate their privileges to root and read, write, or delete arbitrary files from the underlying operating system of the affected device. Note: The ESR is not enabled by default and must be licensed. To verify the status of the ESR in the Admin GUI, choose Administration > Settings > Protocols > IPSec.

A vulnerability in ConfD could allow an authenticated, local attacker to execute arbitrary commands at the level of the account under which ConfD is running, which is commonly root. To exploit this vulnerability, an attacker must have a valid account on an affected device. The vulnerability exists because the affected software incorrectly runs the SFTP user service at the privilege level of the account that was running when the ConfD built-in Secure Shell (SSH) server for CLI was enabled. If the ConfD built-in SSH server was not enabled, the device is not affected by this vulnerability. An attacker with low-level privileges could exploit this vulnerability by authenticating to an affected device and issuing a series of commands at the SFTP interface. A successful exploit could allow the attacker to elevate privileges to the level of the account under which ConfD is running, which is commonly root. Note: Any user who can authenticate to the built-in SSH server may exploit this vulnerability. By default, all ConfD users have this access if the server is enabled. Software updates that address this vulnerability have been released.

A vulnerability in the installer script of Cisco AppDynamics PHP Agent could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient permissions that are set by the PHP Agent Installer on the PHP Agent install directory. An attacker could exploit this vulnerability by modifying objects in the PHP Agent install directory, which would run with the same privileges as PHP. A successful exploit could allow a lower-privileged attacker to elevate their privileges to root on an affected device.

A vulnerability in the CLI of Cisco IOS XE Software for Cisco Catalyst 9000 Family Switches and Cisco Catalyst 9000 Family Wireless Controllers could allow an authenticated, local attacker to elevate privileges to level 15 on an affected device. This vulnerability is due to insufficient validation of user privileges after the user executes certain CLI commands. An attacker could exploit this vulnerability by logging in to an affected device as a low-privileged user and then executing certain CLI commands. A successful exploit could allow the attacker to execute arbitrary commands with level 15 privileges on the affected device.

A vulnerability in the self-healing functionality of Cisco IOS XE Software for Embedded Wireless Controllers on Catalyst Access Points could allow an authenticated, local attacker to escape the restricted controller shell and execute arbitrary commands on the underlying operating system of the access point. This vulnerability is due to improper checks throughout the restart of certain system processes. An attacker could exploit this vulnerability by logging on to an affected device and executing certain CLI commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root. To successfully exploit this vulnerability, an attacker would need valid credentials for a privilege level 15 user of the wireless controller.

A vulnerability in the role-based access control of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker with read-only privileges to obtain administrative privileges by using the console port when the device is in the default SD-WAN configuration. This vulnerability occurs because the default configuration is applied for console authentication and authorization. An attacker could exploit this vulnerability by connecting to the console port and authenticating as a read-only user. A successful exploit could allow a user with read-only permissions to access administrative privileges.

A vulnerability in the user account management system of Cisco AsyncOS for Cisco Content Security Management Appliance (SMA) could allow an authenticated, local attacker to elevate their privileges to root. This vulnerability is due to a procedural flaw in the password generation algorithm. An attacker could exploit this vulnerability by enabling specific Administrator-only features and connecting to the appliance through the CLI with elevated privileges. A successful exploit could allow the attacker to execute arbitrary commands as root and access the underlying operating system. To exploit this vulnerability, the attacker must have valid Administrator credentials.

Multiple vulnerabilities in Cisco Nexus Dashboard could allow an authenticated, local attacker to elevate privileges on an affected device. These vulnerabilities are due to insufficient input validation during CLI command execution on an affected device. An attacker could exploit these vulnerabilities by authenticating as the rescue-user and executing vulnerable CLI commands using a malicious payload. A successful exploit could allow the attacker to elevate privileges to root on an affected device.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to a utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by providing crafted options to a specific command. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root group on the underlying operating system. The vulnerability is due to incorrect permissions being set when the affected command is executed. An attacker could exploit this vulnerability by executing the affected command on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient security controls on the CLI. An attacker could exploit this vulnerability by using an affected CLI utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Solution software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain root-level privileges.

A vulnerability in the CLI of the Cisco SD-WAN Solution vManage software could allow an authenticated, local attacker to elevate privileges to root-level privileges on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted file to the affected system. An exploit could allow the attacker to elevate privileges to root-level privileges.

A vulnerability in the Microsoft Active Directory integration of Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to elevate privileges on an affected device. To exploit this vulnerability, an attacker would need to have a valid administrator account on an affected device. The vulnerability is due to incorrect privilege assignment. An attacker could exploit this vulnerability by logging in to the system with a crafted Active Directory account. A successful exploit could allow the attacker to obtain root privileges on an affected device.

A vulnerability in the AppDynamics .NET Agent for Windows could allow an attacker to leverage an authenticated, local user account to gain SYSTEM privileges. This vulnerability is due to the .NET Agent Coordinator Service executing code with SYSTEM privileges. An attacker with local access to a device that is running the vulnerable agent could create a custom process that would be launched with those SYSTEM privileges. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system. This vulnerability is fixed in AppDynamics .NET Agent Release 21.7.

A vulnerability in the installation procedure for Cisco Prime Network Software could allow an authenticated, local attacker to elevate their privileges to root privileges. More Information: CSCvd47343. Known Affected Releases: 4.2(2.1)PP1 4.2(3.0)PP6 4.3(0.0)PP4 4.3(1.0)PP2. Known Fixed Releases: 4.3(2).

A vulnerability in the Cisco Umbrella Enterprise Roaming Client (ERC) could allow an authenticated, local attacker to elevate privileges to Administrator. To exploit the vulnerability, the attacker must authenticate with valid local user credentials. This vulnerability is due to improper implementation of file system permissions, which could allow non-administrative users to place files within restricted directories. An attacker could exploit this vulnerability by placing an executable file within the restricted directory, which when executed by the ERC client, would run with Administrator privileges.

A vulnerability in the account management subsystem of Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to elevate privileges to root. The attacker must authenticate with valid administrator credentials. The vulnerability is due to improper implementation of access controls. An attacker could exploit this vulnerability by authenticating to the device as a specific user to gain the information needed to elevate privileges to root in a separate login shell. A successful exploit could allow the attacker to escape the CLI subshell and execute system-level commands on the underlying operating system as root. Cisco Bug IDs: CSCvj93548.

A vulnerability in the Cisco Umbrella Enterprise Roaming Client (ERC) could allow an authenticated, local attacker to elevate privileges to Administrator. To exploit the vulnerability, the attacker must authenticate with valid local user credentials. This vulnerability is due to improper implementation of file system permissions, which could allow non-administrative users to place files within restricted directories. An attacker could exploit this vulnerability by placing an executable file within the restricted directory, which when executed by the ERC client, would run with Administrator privileges.

A vulnerability in the ConfD CLI and the Cisco Crosswork Network Services Orchestrator CLI could allow an authenticated, low-privileged, local attacker to read and write arbitrary files as root on the underlying operating system. This vulnerability is due to improper authorization enforcement when specific CLI commands are used. An attacker could exploit this vulnerability by executing an affected CLI command with crafted arguments. A successful exploit could allow the attacker to read or write arbitrary files on the underlying operating system with the privileges of the root user.

A vulnerability in the SSH client feature of Cisco IOS XR Software for Cisco 8000 Series Routers and Cisco Network Convergence System (NCS) 540 Series and 5700 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient validation of arguments that are included with the SSH client CLI command. An attacker with low-privileged access to an affected device could exploit this vulnerability by issuing a crafted SSH client command to the CLI. A successful exploit could allow the attacker to elevate privileges to root on the affected device.

A vulnerability in a script file that is installed as part of the Cisco Policy Suite (CPS) Software distribution for the CPS appliance could allow an authenticated, local attacker to escalate their privilege level to root. The vulnerability is due to incorrect sudoers permissions on the script file. An attacker could exploit this vulnerability by authenticating to the device and providing crafted user input at the CLI, using this script file to escalate their privilege level and execute commands as root. A successful exploit could allow the attacker to acquire root-level privileges and take full control of the appliance. The user has to be logged-in to the device with valid credentials for a specific set of users. The Cisco Policy Suite application is vulnerable when running software versions 10.0.0, 10.1.0, or 11.0.0. Cisco Bug IDs: CSCvc07366.

Multiple vulnerabilities in Cisco Nexus Dashboard could allow an authenticated, local attacker to elevate privileges on an affected device. These vulnerabilities are due to insufficient input validation during CLI command execution on an affected device. An attacker could exploit these vulnerabilities by authenticating as the rescue-user and executing vulnerable CLI commands using a malicious payload. A successful exploit could allow the attacker to elevate privileges to root on an affected device.

A vulnerability in the application-hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. The attacker could execute IOS XE commands outside the application-hosting subsystem Docker container as well as on the underlying Linux operating system. These commands could be run as the root user. The vulnerability is due to a combination of two factors: (a) incomplete input validation of the user payload of CLI commands, and (b) improper role-based access control (RBAC) when commands are issued at the command line within the application-hosting subsystem. An attacker could exploit this vulnerability by using a CLI command with crafted user input. A successful exploit could allow the lower-privileged attacker to execute arbitrary CLI commands with root privileges. The attacker would need valid user credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an authenticated, local attacker to execute arbitrary commands as root by supplying a crafted file to the affected system. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by uploading a crafted file to the affected system. A successful exploit could allow the attacker to perform command injection attacks on an affected system and elevate their privileges as the root user.  To exploit this vulnerability, the attacker must have netadmin privileges on the affected system. This would require valid credentials or exploitation of or . Cisco is not aware of successful exploitation by other methods. Cisco has observed limited cases where the exploitation of this bug resulted in a configuration change pushed to edge devices. Cisco recommends that customers upgrade to the fixed software that is documented in the that was published on May 14, 2026, and verify the configuration of the edge devices.

A vulnerability in the Start Before Logon (SBL) module of Cisco AnyConnect Secure Mobility Client Software for Windows could allow an unauthenticated, local attacker to open Internet Explorer with the privileges of the SYSTEM user. The vulnerability is due to insufficient implementation of the access controls. An attacker could exploit this vulnerability by opening the Internet Explorer browser. An exploit could allow the attacker to use Internet Explorer with the privileges of the SYSTEM user. This may allow the attacker to execute privileged commands on the targeted system. This vulnerability affects versions prior to released versions 4.4.00243 and later and 4.3.05017 and later. Cisco Bug IDs: CSCvc43976.

Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco IOS XE Software of could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust. These vulnerabilities are due path traversal and improper image integrity validation. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Because this allows the attacker to bypass a major security feature of the device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High. For more information about these vulnerabilities, see the Details ["#details"] section of this advisory. ERP

A vulnerability in the CLI of Cisco Catalyst SD-WAN Manager, formerly Cisco SD-WAN vManage, could allow an authenticated, local attacker to gain privileges of the root user on the underlying operating system. This vulnerability is due to insufficient input validation. An authenticated attacker with read-only privileges on the SD-WAN Manager system could exploit this vulnerability by sending a crafted request to the CLI of the SD-WAN Manager. A successful exploit could allow the attacker to gain root privileges on the underlying operating system.

A vulnerability in the CLI of Cisco APIC could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of root.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with administrative privileges to execute arbitrary commands as root on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by logging in to the device CLI with valid administrative (level 15) credentials and using crafted commands at the CLI prompt. A successful exploit could allow the attacker to execute arbitrary commands as root.

A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker to bypass Cisco IOS XR image signature verification and load unverified software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device. This vulnerability is due to incomplete validation of files in the boot verification process. An attacker could exploit this vulnerability by manipulating the system configuration options to bypass some of the integrity checks that are performed during the boot process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass the requirement to run Cisco-signed images or alter the security properties of the running system. Note: Because exploitation of this vulnerability could result in the attacker bypassing Cisco image verification, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.

A vulnerability in the implementation of the remote access functionality of Cisco AsyncOS Software for Cisco Secure Email and Web Manager, Cisco Secure Email Gateway, and Cisco Secure Web Appliance could allow an authenticated, local attacker to elevate privileges to root. The attacker must authenticate with valid administrator credentials. This vulnerability is due to an architectural flaw in the password generation algorithm for the remote access functionality. An attacker could exploit this vulnerability by generating a temporary password for the service account. A successful exploit could allow the attacker to execute arbitrary commands as root and access the underlying operating system. Note: The Security Impact Rating (SIR) for this vulnerability is Medium due to the unrestricted scope of information that is accessible to an attacker.

A vulnerability in Cisco Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. This vulnerability is due to insufficient restrictions during the execution of specific CLI commands. An attacker could exploit this vulnerability by logging in to the Cisco Spaces Connector CLI as the spacesadmin user and executing a specific command with crafted parameters. A successful exploit could allow the attacker to elevate privileges from the spacesadmin user and execute arbitrary commands on the underlying operating system as root.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to an affected device to execute persistent code at boot time and break the chain of trust. This vulnerability is due to improper validation of software packages. An attacker could exploit this vulnerability by placing a crafted file into a specific location on an affected device. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Because this vulnerability allows an attacker to bypass a major security feature of a device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.

Cisco NX-OS allows local users to gain privileges and execute arbitrary commands via shell metacharacters in unspecified command parameters, aka Bug IDs CSCtf19827 and CSCtf27788.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker with high privileges to bypass the Secure Boot functionality and load unverified software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device. This vulnerability is due to insufficient verification of modules in the software load process. An attacker could exploit this vulnerability by manipulating the loaded binaries to bypass some of the integrity checks that are performed during the booting process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass the requirement to run Cisco-signed images or alter the security properties of the running system. Note: This vulnerability affects Cisco IOS XR Software, not the Secure Boot feature. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability in the web-based management interface of Cisco Unified CCX could allow an authenticated, local attacker to execute arbitrary code on an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to improper limitation of a pathname to a restricted directory (path traversal). An attacker could exploit this vulnerability by sending a crafted web request to an affected device, followed by a specific command through an SSH session. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of an affected device as a low-privilege user. A successful exploit could also allow the attacker to undertake further actions to elevate their privileges to root.

A vulnerability in the CLI of multiple Cisco Unified Communications products could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device as the root user. This vulnerability is due to improper validation of user-supplied command arguments. An attacker could exploit this vulnerability by executing crafted commands on the CLI of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system of an affected device as the root user. To exploit this vulnerability, the attacker must have valid administrative credentials.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

A vulnerability in the Network Access Manager and Web Security Agent components of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL injection attack. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. The vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by inserting a configuration file in a specific path in the system which, in turn, causes a malicious DLL file to be loaded when the application starts. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges.

A vulnerability in the loading mechanism of specific DLLs of Cisco Advanced Malware Protection (AMP) for Endpoints for Windows and Immunet for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack. To exploit this vulnerability, the attacker would need valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory search paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file on the targeted system. This file will execute when the vulnerable application launches. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with SYSTEM privileges.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. These vulnerabilities are due to insufficient restrictions during the execution of affected CLI commands. An attacker could exploit these vulnerabilities by leveraging the insufficient restrictions during execution of these commands. A successful exploit could allow the attacker to elevate privileges from dnasadmin and execute arbitrary commands on the underlying operating system as root.

A vulnerability in the debug interface of Cisco IP Phone 8800 series could allow an authenticated, local attacker to execute arbitrary commands, aka Debug Shell Command Injection. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting additional command input to the affected parameter in the debug shell. Cisco Bug IDs: CSCvf80034.

A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions within the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. To exploit this vulnerability, an attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit. This vulnerability affects the following Cisco products if they are running Cisco NX-OS Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches - Standalone, NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvb86832, CSCvd86474, CSCvd86479, CSCvd86484, CSCvd86490, CSCve97102, CSCvf12757, CSCvf12804, CSCvf12815, CSCvf15198.

An untrusted search path (aka DLL Preload) vulnerability in the Cisco Network Academy Packet Tracer software could allow an authenticated, local attacker to execute arbitrary code via DLL hijacking if a local user with administrative privileges executes the installer in the current working directory where a crafted DLL has been placed by an attacker. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. An attacker would need valid user credentials to exploit this vulnerability.