A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the setSessionTime function in /cgi-bin/luci/api/common..

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the doSwitchApi function in /cgi-bin/luci/api/switch.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the runPackDiagnose function in /cgi-bin/luci/api/diagnose.

RG-EW1200G PRO Wireless Routers EW_3.0(1)B11P204, RG-EW1800GX PRO Wireless Routers EW_3.0(1)B11P204, and RG-EW3200GX PRO Wireless Routers EW_3.0(1)B11P204 were discovered to contain multiple command injection vulnerabilities via the data.ip, data.protocal, data.iface and data.package parameters in the runPackDiagnose function of diagnose.lua.

A vulnerability was found in Ruijie RG-EW1200G 07161417 r483. It has been rated as critical. Affected by this issue is some unknown functionality of the file /api/sys/login. The manipulation leads to improper authentication. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-237518 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Ruijie BCR810W 2.5.10. It has been rated as critical. This issue affects some unknown processing of the component Tracert Page. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-233477 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the updateVersion function in /cgi-bin/luci/api/wireless.

An issue discovered in RG-RSR10-01G-T(W)-S and RG-RSR10-01G-T(WA)-S routers with firmware version RSR10-01G-T-S_RSR_3.0(1)B9P2, Release(07150910) allows attackers to execute arbitrary code via the common_quick_config.lua file.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the checkNet function in /cgi-bin/luci/api/auth.

Ruijie Networks RG-EW1200 Wireless Routers EW_3.0(1)B11P204 was discovered to contain a command injetion vulnerability via the params.path parameter in the upgradeConfirm function.

Ruijie NBR800G gateway NBR_RGOS_11.1(6)B4P9 is vulnerable to command execution in /itbox_pi/networksafe.php via the province parameter.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “check_vertica_upgrade” value for the “cpIp” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

A remote code execution vulnerability was identified in GitHub Enterprise Server that could be exploited when building a GitHub Pages site. To exploit this vulnerability, an attacker would need permission to create and build a GitHub Pages site on the GitHub Enterprise Server instance. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.3 and was fixed in versions 3.0.21, 3.1.13, 3.2.5. This vulnerability was reported via the GitHub Bug Bounty program.

Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the CLI use of the ‘more’ command. A local or remote authenticated attacker could potentially exploit this vulnerability, leading to the ability to gain root-level access.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “update_checkfile” value for the “filename” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

The ping_from parameter of ping_tracerte.cgi in the web UI of Telstra Smart Modem Gen 2 (Arcadyan LH1000), firmware versions < 0.18.15r, was not properly sanitized before being used in a system call, which could allow an authenticated attacker to achieve command injection as root on the device. 

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20230807. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /log/decodmail.php. The manipulation of the argument file leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237517 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Vulnerability in rconfig “remote_text_file” enables an attacker with user level access to the CLI to inject user level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

An issue in Netgate pfSense v.2.7.0 allows a remote attacker to execute arbitrary code via a crafted request to the interfaces_gif_edit.php and interfaces_gre_edit.php components.

The KuWFi 4G AC900 LTE router 1.0.13 is vulnerable to command injection on the HTTP API endpoints /goform/formMultiApnSetting and /goform/atCmd. An authenticated attacker can execute arbitrary OS commands with root privileges via shell metacharacters in parameters such as pincode and cmds. Exploitation can lead to full system compromise, including enabling remote access (e.g., enabling telnet).

TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds NAPT rules after authentication, and the rule name has an injection point.

A vulnerability, which was classified as critical, has been found in anji-plus AJ-Report up to 1.4.1. This issue affects the function IGroovyHandler. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-266267.

Command injection vulnerability in the homemng.htm endpoint in Juplink RX4-1500 Wifi router firmware versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows authenticated remote attackers to execute commands as root via specially crafted HTTP requests to the vulnerable endpoint.

In Splunk Enterprise versions below 8.2.12, 9.0.6, and 9.1.1, an attacker can create an external lookup that calls a legacy internal function. The attacker can use this internal function to insert code into the Splunk platform installation directory. From there, a user can execute arbitrary code on the Splunk platform Instance.

OPNsense 25.1 contains an authenticated command injection vulnerability in its Bridge Interface Edit endpoint (interfaces_bridge_edit.php). The span POST parameter is concatenated into a system-level command without proper sanitization or escaping, allowing an administrator to inject arbitrary shell operators and payloads. Successful exploitation grants RCE with the privileges of the web service (typically root), potentially leading to full system compromise or lateral movement. This vulnerability arises from inadequate input validation and improper handling of user-supplied data in backend command invocations.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20230722 and classified as critical. This issue affects some unknown processing of the file importhtml.php. The manipulation of the argument sql leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-235967. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Command injection in homemng.htm in Juplink RX4-1500 versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows remote authenticated attackers to execute commands via specially crafted requests to the vulnerable endpoint.

A Command Injection vulnerability exists in the web-based GUI of the 1st Gen Pelco Sarix Enhanced Camera that could allow a remote attacker to execute arbitrary commands.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “feed_comm_test” value for the “feed” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

xymond in Xymon 4.1.x, 4.2.x, and 4.3.x before 4.3.25 allow remote authenticated users to execute arbitrary commands via shell metacharacters in the adduser_name argument in (1) web/useradm.c or (2) web/chpasswd.c.

An issue was discovered in Atos Unify OpenScape Voice Trace Manager V8 before V8 R0.9.11. It allows authenticated command injection via ftp.

ScanCode.io is a server to script and automate software composition analysis with ScanPipe pipelines. Prior to version 32.5.1, the software has a possible command injection vulnerability in the docker fetch process as it allows to append malicious commands in the `docker_reference` parameter. In the function `scanpipe/pipes/fetch.py:fetch_docker_image` the parameter `docker_reference` is user controllable. The `docker_reference` variable is then passed to the vulnerable function `get_docker_image_platform`. However, the `get_docker_image_plaform` function constructs a shell command with the passed `docker_reference`. The `pipes.run_command` then executes the shell command without any prior sanitization, making the function vulnerable to command injections. A malicious user who is able to create or add inputs to a project can inject commands. Although the command injections are blind and the user will not receive direct feedback without logs, it is still possible to cause damage to the server/container. The vulnerability appears for example if a malicious user adds a semicolon after the input of `docker://;`, it would allow appending malicious commands. Version 32.5.1 contains a patch for this issue. The `docker_reference` input should be sanitized to avoid command injections and, as a workaround, one may avoid creating commands with user controlled input directly.

A command injection vulnerability in RG-EW series home routers and repeaters v.EW_3.0(1)B11P219, RG-NBS and RG-S1930 series switches v.SWITCH_3.0(1)B11P219, RG-EG series business VPN routers v.EG_3.0(1)B11P219, EAP and RAP series wireless access points v.AP_3.0(1)B11P219, and NBC series wireless controllers v.AC_3.0(1)B11P219 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /cgi-bin/luci/api/cmd via the remoteIp field.

An authenticated remote code execution vulnerability was discovered in the AOS-CX Network Analytics Engine (NAE) in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): AOS-CX 10.07.xxxx: 10.07.0050 and below, AOS-CX 10.08.xxxx: 10.08.1030 and below, AOS-CX 10.09.xxxx: 10.09.0002 and below. Aruba has released upgrades for Aruba AOS-CX devices that address this security vulnerability.

An issue in NETIS SYSTEMS WF2409E v.3.6.42541 allows a remote attacker to execute arbitrary code via the ping and traceroute functions of the diagnostic tools component in the admin management interface.

An issue was discovered in SuperWebMailer 9.00.0.01710. It allows Remote Code Execution via a crafted sendmail command line.

Netgear WG302v2 v5.2.9 and WAG302v2 v5.1.19 were discovered to contain multiple command injection vulnerabilities in the upgrade_handler function via the firmwareRestore and firmwareServerip parameters.

Improper neutralization of special elements used in a command ('Command Injection') vulnerability in File service functionality in Synology DiskStation Manager (DSM) before 6.2.4-25556-2 allows remote authenticated users to execute arbitrary commands via unspecified vectors.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x prior to 6.10.2 - - ClearPass Policy Manager 6.9.x prior to 6.9.7-HF1 - - ClearPass Policy Manager 6.8.x prior to 6.8.9-HF1. Aruba has released patches for ClearPass Policy Manager that address this security vulnerability.

An authenticated command injection vulnerability exists in the AOS-CX command line interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands on the underlying operating system as a privileged user on the affected switch. This allows an attacker to fully compromise the underlying operating system on the device running AOS-CX.

CasaOS is an open-source personal cloud system. Prior to version 0.4.4, if an authenticated user using CasaOS is able to successfully connect to a controlled SMB server, they are able to execute arbitrary commands. Version 0.4.4 contains a patch for the issue.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doCertificate function.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doSSLTunnel function.

A vulnerability in the HPE Aruba Networking ClearPass Policy Manager web-based management interface could allow an authenticated remote threat actor to conduct a remote code execution attack. Successful exploitation could enable the attacker to run arbitrary commands on the underlying operating system.

Vulnerability in rconfig “cert_utils” enables an attacker with user level access to the CLI to inject root level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the dumpSyslog function.

1Panel is an open source Linux server operation and maintenance management panel. Prior to version 1.3.6, an authenticated attacker can craft a malicious payloads to achieve command injection when entering the container terminal. The vulnerability has been fixed in v1.3.6.

Azure Identity SDK Remote Code Execution Vulnerability

1Panel is an open source Linux server operation and maintenance management panel. Prior to version 1.3.6, an authenticated attacker can craft a malicious payload to achieve command injection when adding container repositories. The vulnerability has been fixed in v1.3.6.