An access control issue in the component formDMZ.cgi of D-Link 816A2_FWv1.10CNB05_R1B011D88210 allows unauthenticated attackers to set the DMZ service of the device via a crafted POST request.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom telnet daemon as a part of the busybox and retrieves the password from the shadow file using the function getspnam at address 0x00053894. Then performs a crypt operation on the password retrieved from the user at address 0x000538E0 and performs a strcmp at address 0x00053908 to check if the password is correct or incorrect. However, the /etc/shadow file is a part of CRAM-FS filesystem which means that the user cannot change the password and hence a hardcoded hash in /etc/shadow is used to match the credentials provided by the user. This is a salted hash of the string "admin" and hence it acts as a password to the device which cannot be changed as the whole filesystem is read only.

Multiple SQL injection vulnerabilities in D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 allow remote attackers to execute arbitrary SQL commands via the password to (1) the login.authenticate function in share/lua/5.1/teamf1lualib/login.lua or (2) captivePortal.lua.

D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function upgrade_filter. This vulnerability allows attackers to execute arbitrary commands via the path and time parameters.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device.

D-Link device DIR_878_FW1.30B08_Hotfix_02 was discovered to contain a command injection vulnerability in the twsystem function. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetNetworkTomographySettings. This vulnerability allows attackers to execute arbitrary commands via the tomography_ping_address, tomography_ping_number, tomography_ping_size, tomography_ping_timeout, and tomography_ping_ttl parameters.

D-Link device DIR_882 DIR_882_FW1.30B06_Hotfix_02 was discovered to contain a command injection vulnerability in the LocalIPAddress parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

D-Link device DIR_882 DIR_882_FW1.30B06_Hotfix_02 was discovered to contain a command injection vulnerability in the twsystem function. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function msp_info.htm. This vulnerability allows attackers to execute arbitrary commands via the cmd parameter.

A Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetNetworkTomographySettings.php of D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin because backticks can be used for command injection when judging whether it is a reasonable domain name.

D-Link DIR-822 Rev.Bx devices with firmware v.202KRb06 and older allow a buffer overflow via long MacAddress data in a /HNAP1/SetClientInfo HNAP protocol message, which is mishandled in /usr/sbin/udhcpd during reading of the /var/servd/LAN-1-udhcpd.conf file.

D-Link DIR-865L has PHP File Inclusion in the router xml file.

The D-Link DIR-615 device before v20.12PTb04 doesn't use SSL for any of the authenticated pages. Also, it doesn't allow the user to generate his own SSL Certificate. An attacker can simply monitor network traffic to steal a user's credentials and/or credentials of users being added while sniffing the traffic.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetStaticRouteSettings. This vulnerability allows attackers to execute arbitrary commands via the staticroute_list parameter.

D-LINK DI-8003 v16.07.26A1 was discovered to contain a buffer overflow via the ip parameter in the ip_position_asp function.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function proxy_client.asp. This vulnerability allows attackers to execute arbitrary commands via the proxy_srv, proxy_srvport, proxy_lanip, proxy_lanport parameters.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function urlrd_opt.asp. This vulnerability allows attackers to execute arbitrary commands via the url_en parameter.

The web interface on D-Link DIR-100, DIR-120, DI-624S, DI-524UP, DI-604S, DI-604UP, DI-604+, and TM-G5240 routers; Planex BRL-04R, BRL-04UR, and BRL-04CW routers; and Alpha Networks routers allows remote attackers to bypass authentication and modify settings via an xmlset_roodkcableoj28840ybtide User-Agent HTTP header, as exploited in the wild in October 2013.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DAR-7000-40 V31R02B1413C. Affected by this issue is some unknown functionality of the file /useratte/resmanage.php. The manipulation of the argument file leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-264530 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DAR-7000-40 V31R02B1413C and classified as critical. This vulnerability affects unknown code of the file /firewall/urlblist.php. The manipulation of the argument file leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-264532. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

An Access Control vulnerability exists in D-Link DIR-823G REVA1 1.02B05 (Lastest) via any parameter in the HNAP1 function

D-Link DIR-645 1.03 A1 is vulnerable to Buffer Overflow. The hnap_main function in the cgibin handler uses sprintf to format the soapaction header onto the stack and has no limit on the size.

Missing Authentication for Critical Function vulnerability in debug_post_set.cgi of D-Link DWR-932C E1 firmware allows an unauthenticated attacker to execute administrative actions.

OS Command Injection vulnerability in debug_fcgi of D-Link DWR-932C E1 firmware allows a remote attacker to perform command injection via a crafted HTTP request.

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.

D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via msp_info.htm.

D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via sub47A60C function in the upgrade_filter.asp file

D-Link DI_8004W 16.07.26A1 contains a command execution vulnerability in the jhttpd upgrade_filter_asp function.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetWLanApcliSettings. This vulnerability allows attackers to execute arbitrary commands via the ApCliKeyStr parameter.

D-Link DI-8300 v16.07.26A1 is vulnerable to command injection via the upgrade_filter_asp function.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the wl(0).(0)_ssid parameter. This vulnerability is exploited via a crafted POST request.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

A vulnerability was discovered in DI_8400-16.07.26A1, which has been classified as critical. This issue affects the upgrade_filter_asp function in the upgrade_filter.asp file. Manipulation of the path parameter can lead to command injection.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function wget_test.asp. This vulnerability allows attackers to execute arbitrary commands via the url parameter.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function version_upgrade.asp. This vulnerability allows attackers to execute arbitrary commands via the path parameter.

D-Link DI_8004W 16.07.26A1 contains a command execution vulnerability in jhttpd msp_info_htm function.

An issue was discovered in D-Link DIR-816 DIR-816A2_FWv1.10CNB05_R1B011D88210 The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters.

A Command Injection vulnerability exists in the /var/www/cgi-bin/rtpd.cgi script in D-Link IP Cameras DCS-3411/3430 firmware 1.02, DCS-5605/5635 1.01, DCS-1100L/1130L 1.04, DCS-1100/1130 1.03, DCS-1100/1130 1.04_US, DCS-2102/2121 1.05_RU, DCS-3410 1.02, DCS-5230 1.02, DCS-5230L 1.02, DCS-6410 1.00, DCS-7410 1.00, DCS-7510 1.00, and WCS-1100 1.02, which could let a remote malicious user execute arbitrary commands through the camera’s web interface.

In D-Link DIR-860L v2.03, there is a buffer overflow vulnerability due to the lack of length verification for the SID field in gena.cgi. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.

D-Link DVX-2000MS contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values.

A Remote Command Execution (RCE) vulnerability exists in all series H/W revisions D-link DIR-810L, DIR-820L/LW, DIR-826L, DIR-830L, and DIR-836L routers via the DDNS function in ncc2 binary file. Note: DIR-810L, DIR-820L, DIR-830L, DIR-826L, DIR-836L, all hardware revisions, have reached their End of Life ("EOL") /End of Service Life ("EOS") Life-Cycle and as such this issue will not be patched.

In the "webupg" binary of D-Link DIR-825 G1, attackers can bypass authentication through parameters "autoupgrade.asp", and perform functions such as downloading configuration files and updating firmware without authorization.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function usb_paswd.asp. This vulnerability allows attackers to execute arbitrary commands via the name parameter.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function httpd_debug.asp. This vulnerability allows attackers to execute arbitrary commands via the time parameter.

Certain D-Link products are affected by: Buffer Overflow. This affects DIR-880L 1.08B04 and DIR-895 L/R 1.13b03. The impact is: execute arbitrary code (remote). The component is: htdocs/fileaccess.cgi. The attack vector is: A crafted HTTP request handled by fileacces.cgi could allow an attacker to mount a ROP attack: if the HTTP header field CONTENT_TYPE starts with ''boundary=' followed by more than 256 characters, a buffer overflow would be triggered, potentially causing code execution.

In D-Link DIR-860L REVA FIRMWARE PATCH 1.10..B04, the Telnet service contains hardcoded credentials, enabling attackers to log in remotely to the Telnet service and perform arbitrary commands.

D-Link DIR-300 REVA FIRMWARE v1.06B05_WW contains hardcoded credentials in the Telnet service.

D-Link DIR-820LW REVB FIRMWARE PATCH 2.03.B01_TC contains hardcoded credentials in the Telnet service, enabling attackers to log in remotely to the Telnet service and perform arbitrary commands.