OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter.

Hardcoded manufacturer credentials and an OS command injection vulnerability in the /cgi-bin/mft/ directory on ABUS TVIP TVIP20050 LM.1.6.18, TVIP10051 LM.1.6.18, TVIP11050 MG.1.6.03.05, TVIP20550 LM.1.6.18, TVIP10050 LM.1.6.18, TVIP11550 MG.1.6.03, TVIP21050 MG.1.6.03, and TVIP51550 MG.1.6.03 cameras allow remote attackers to execute code as root.

Xerox WorkCentre 3655, 3655i, 58XX, 58XXi, 59XX, 59XXi, 6655, 6655i, 72XX, 72XXi, 78XX, 78XXi, 7970, and 7970i devices before 073.xxx.086.15410 do not properly escape parameters in the support/remoteUI/configrui.php script, which can allow an unauthenticated attacker to execute OS commands on the device.

PowerCMS XMLRPC API of PowerCMS 5.19 and earlier, PowerCMS 4.49 and earlier, PowerCMS 3.295 and earlier, and PowerCMS 2 Series (End-of-Life, EOL) allows a remote attacker to execute an arbitrary OS command via unspecified vectors.

An issue was discovered on KONE Group Controller (KGC) devices before 4.6.5. Unauthenticated Remote Code Execution is possible through the open HTTP interface by modifying autoexec.bat, aka KONE-01.

Teltonika RUT9XX routers with firmware before 00.04.233 are prone to multiple unauthenticated OS command injection vulnerabilities in autologin.cgi and hotspotlogin.cgi due to insufficient user input sanitization. This allows remote attackers to execute arbitrary commands with root privileges.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/NTPSyncWithHost route. This could lead to command injection via shell metacharacters.

TOTOLINK N600R V4.3.0cu.7647_B20210106 was discovered to contain a command injection vulnerability via the pin parameter in the setWiFiWpsConfig function.

The application login page in AKIPS Network Monitor 15.37 through 16.5 allows a remote unauthenticated attacker to execute arbitrary OS commands via shell metacharacters in the username parameter (a failed login attempt returns the command-injection output to a limited login failure field). This is fixed in 16.6.

An OS command injection vulnerability exists in Russound MBX-PRE-D67F firmware version 3.1.6, allowing unauthenticated attackers to execute arbitrary commands as root via crafted input to the hostname parameter in network configuration requests. This vulnerability stems from improper neutralization of special elements used in an OS command within the network configuration handler, enabling remote code execution with the highest privileges.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

AutoGPT, a component of significant-gravitas/autogpt, is vulnerable to an improper neutralization of special elements used in an OS command ('OS Command Injection') due to a flaw in its shell command validation function. Specifically, the vulnerability exists in versions v0.5.0 up to but not including 5.1.0. The issue arises from the application's method of validating shell commands against an allowlist or denylist, where it only checks the first word of the command. This allows an attacker to bypass the intended restrictions by crafting commands that are executed despite not being on the allowlist or by including malicious commands not present in the denylist. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary shell commands.

The npm module "shell-quote" 1.6.0 and earlier cannot correctly escape ">" and "<" operator used for redirection in shell. Applications that depend on shell-quote may also be vulnerable. A malicious user could perform code injection.

Loomio version 2.22.0 allows executing arbitrary commands on the server. This is possible because the application is vulnerable to OS Command Injection.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

LogonTracer 1.2.0 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

An issue was discovered in Radisys MRF Web Panel (SWMS) 9.0.1. The MSM_MACRO_NAME POST parameter in /swms/ms.cgi was discovered to be vulnerable to OS command injection attacks. It is possible to use the pipe character (|) to inject arbitrary OS commands and retrieve the output in the application's responses. Attackers could execute unauthorized commands, which could then be used to disable the software, or read, write, and modify data for which the attacker does not have permissions to access directly. Since the targeted application is directly executing the commands instead of the attacker, any malicious activities may appear to come from the application or the application's owner (apache user).

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

WeGIA is a web manager for charitable institutions. Prior to version 3.4.2, an OS Command Injection vulnerability was identified in the /html/configuracao/debug_info.php endpoint. The branch parameter is not properly sanitized before being concatenated and executed in a shell command on the server's operating system. This flaw allows an unauthenticated attacker to execute arbitrary commands on the server with the privileges of the web server user (www-data). This issue has been patched in version 3.4.2.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Unrestricted Upload of File with Dangerous Type, Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in SMG Software Information Portal allows Code Injection, Upload a Web Shell to a Web Server, Code Inclusion.This issue affects Information Portal: before 13.06.2025.

The web interface on FASTGate Fastweb devices with firmware through 0.00.47_FW_200_Askey 2017-05-17 (software through 1.0.1b) exposed a CGI binary that is vulnerable to a command injection vulnerability that can be exploited to achieve remote code execution with root privileges. No authentication is required in order to trigger the vulnerability.

The test connection functionality in the NetAudit section of Opsview Monitor before 5.3.1 and 5.4.x before 5.4.2 is vulnerable to command injection due to improper sanitization of the rancid_password parameter.

RICOH Interactive Whiteboard D2200 V1.6 to V2.2, D5500 V1.6 to V2.2, D5510 V1.6 to V2.2, and the display versions with RICOH Interactive Whiteboard Controller Type1 V1.6 to V2.2 attached (D5520, D6500, D6510, D7500, D8400) allows remote attackers to execute arbitrary commands via unspecified vectors.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ONVIF devicemgmt SetDNS method allows remote attackers to execute arbitrary OS commands via the IPv4Address field.

Unauthenticated remote attackers can access the system through the LoadMaster management interface, enabling arbitrary system command execution.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

System command injection in the /DroboPix/api/drobopix/demo endpoint on Drobo 5N2 NAS version 4.0.5-13.28.96115 allows unauthenticated attackers to execute system commands via the payload in a POST request.

The Python CGI scripts in PWS in Imperva SecureSphere 13.0.10, 13.1.10, and 13.2.10 allow remote attackers to execute arbitrary OS commands because command-line arguments are mishandled.

Western Digital WD My Book Live and WD My Book Live Duo (all versions) have a root Remote Command Execution bug via shell metacharacters in the /api/1.0/rest/language_configuration language parameter. It can be triggered by anyone who knows the IP address of the affected device, as exploited in the wild in June 2021 for factory reset commands,

A vulnerability was found in openBI up to 1.0.8 and classified as critical. This issue affects the function dlfile of the file /application/websocket/controller/Setting.php. The manipulation of the argument phpPath leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-252473 was assigned to this vulnerability.

Shell Metacharacter Injection in www/modules/save.php in FruityWifi (aka PatatasFritas/PatataWifi) through 2.4 allows remote attackers to execute arbitrary code with root privileges via a crafted mod_name parameter in a POST request. NOTE: unlike in CVE-2018-17317, the attacker does not need a valid session.

A vulnerability has been found in didi Super-Jacoco 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /cov/triggerUnitCover. The manipulation of the argument uuid leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been rated as critical. Affected by this issue is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument group leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

Netwrix Password Secure 9.2.0.32454 allows OS command injection.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/Diagnosis route. This could lead to command injection via shell metacharacters in the sendNum parameter.

A vulnerability in ESM 11.6.10 allows unauthenticated access to the internal Snowservice API and enables remote code execution through command injection, executed as the root user.

An issue was discovered on Tenda AC7 devices with firmware through V15.03.06.44_CN(AC7), AC9 devices with firmware through V15.03.05.19(6318)_CN(AC9), and AC10 devices with firmware through V15.03.06.23_CN(AC10). A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted goform/setUsbUnload request. This occurs because the "formsetUsbUnload" function executes a dosystemCmd function with untrusted input.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

The wireless router WRTM326 from SECOM does not properly validate a specific parameter. An unauthenticated remote attacker could execute arbitrary system commands by sending crafted requests.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

An unvalidated REST API in the AppFormix Agent of Juniper Networks AppFormix allows an unauthenticated remote attacker to execute commands as root on the host running the AppFormix Agent, when certain preconditions are performed by the attacker, thus granting the attacker full control over the environment. This issue affects: Juniper Networks AppFormix 3 versions prior to 3.1.22, 3.2.14, 3.3.0.

upgrade_handle.php on NUUO NVRmini devices allows Remote Command Execution via shell metacharacters in the uploaddir parameter for a writeuploaddir command.

A vulnerability was found in Issabel PBX 4.0.0. It has been rated as critical. This issue affects some unknown processing of the file /index.php?menu=asterisk_cli of the component Asterisk-Cli. The manipulation of the argument Command leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252251. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

ELTEX NTP-RG-1402G 1v10 3.25.3.32 devices allow OS command injection via the PING field of the resource ping.cmd. The NTP-2 device is also affected.

System command injection in formAliasIp in TOTOLINK A3002RU version 1.0.8 allows attackers to execute system commands via the "subnet" POST parameter.