PhpTax version 0.8 contains a remote code execution vulnerability in drawimage.php. The pfilez GET parameter is unsafely passed to the exec() function without sanitization. A remote attacker can inject arbitrary shell commands, leading to code execution under the web server's context. No authentication is required.

Fleet is open source device management software. Prior to 4.81.1, a command injection vulnerability in Fleet's software installer pipeline allows an attacker to achieve arbitrary code execution as root (macOS/Linux) or SYSTEM (Windows) on managed hosts when an uninstall is triggered for a crafted software package. Version 4.81.1 patches the issue.

A flaw has been found in D-Link DIR-868L 110b03. This affects the function sub_1BF84 of the component SSDP Service. This manipulation of the argument ST causes os command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20231012. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /importexport.php. The manipulation leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-243061 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in I-O DATA network attached hard disk 'HDL-T Series' firmware Ver.1.21 and earlier when 'Remote Link3 function' is enabled. If exploited, a remote unauthenticated attacker may execute an arbitrary OS command.

EasyPHP Webserver 14.1 contains an OS command injection vulnerability that allows unauthenticated attackers to execute arbitrary system commands by injecting malicious payloads through the app_service_control parameter. Attackers can send POST requests to /index.php?zone=settings with crafted app_service_control values to execute commands with administrative privileges.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20231010 and classified as critical. This issue affects some unknown processing of the file /sysmanage/importconf.php. The manipulation of the argument btn_file_renew leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-243059. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Winston 1.5.4 devices are vulnerable to command injection via the API.

Web-Check is an all-in-one OSINT tool for analyzing any website. A command injection vulnerability exists in the screenshot API of the Web Check project (Lissy93/web-check). The issue stems from user-controlled input (url) being passed unsanitized into a shell command using exec(), allowing attackers to execute arbitrary system commands on the underlying host. This could be exploited by sending crafted url parameters to extract files or even establish remote access. The vulnerability has been patched by replacing exec() with execFile(), which avoids using a shell and properly isolates arguments.

wenxian is a tool to generate BIBTEX files from given identifiers (DOI, PMID, arXiv ID, or paper title). In versions 0.3.1 and prior, a GitHub Actions workflow uses untrusted user input from issue_comment.body directly inside a shell command, allowing potential command injection and arbitrary code execution on the runner. At time of publication, there are no publicly available patches.

Anthropic Claude Code CLI and Claude Agent SDK contain an OS command injection vulnerability in authentication helper execution where helper configuration values are executed using shell=true without input validation. Attackers who can influence authentication settings can inject shell metacharacters through parameters like apiKeyHelper, awsAuthRefresh, awsCredentialExport, and gcpAuthRefresh to execute arbitrary commands with the privileges of the user or automation environment, enabling credential theft and environment variable exfiltration.

upgrade_handle.php on NUUO NVRmini devices allows Remote Command Execution via shell metacharacters in the uploaddir parameter for a writeuploaddir command.

A security flaw has been discovered in Totolink N300RH 6.1c.1353_B20190305. Affected by this vulnerability is the function setWebWlanIdx of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Performing a manipulation of the argument webWlanIdx results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

Pi-hole Admin Interface is a web interface for managing Pi-hole, a network-level ad and internet tracker blocking application. Versions prior to 6.0 have a critical OS Command Injection vulnerability in the savesettings.php file. The application takes the user-controlled $_POST['webtheme'] parameter and concatenates it directly into a system command executed via PHP's exec() function. Since the input is neither sanitized nor validated before being passed to the shell, an attacker can append arbitrary system commands to the intended pihole command. Furthermore, because the command is executed with sudo privileges, the injected commands will run with elevated (likely root) privileges. Version 6.0 patches the issue.

PaddlePaddle before 2.6.0 has a command injection in get_online_pass_interval. This resulted in the ability to execute arbitrary commands on the operating system.

PaddlePaddle before 2.6.0 has a command injection in _wget_download. This resulted in the ability to execute arbitrary commands on the operating system.

D-Link DIR-822+ V1.0.2 was found to contain a command injection in SetStaticRouteSettings function. allows remote attackers to execute arbitrary commands via shell.

TOTOlink A3700R v9.1.2u.5822_B20200513 was discovered to contain a remote command execution (RCE) vulnerability via the setTracerouteCfg function.

TOTOlink EX1800T V9.1.0cu.2112_B20220316 was discovered to contain a remote command execution (RCE) vulnerability via the telnet_enabled parameter of the setTelnetCfg interface

TOTOLINK EX1200L V9.3.5u.6146_B20201023 is vulnerable to arbitrary command execution on the cstecgi.cgi NTPSyncWithHost interface.

Ruijie WS6008 v1.x v2.x AC_RGOS11.9(6)W3B2_G2C6-01_10221911 and WS6108 v1.x AC_RGOS11.9(6)W3B2_G2C6-01_10221911 was discovered to contain a command injection vulnerability via the function downFiles.

TOTOlink EX1200L V9.3.5u.6146_B20201023 is vulnerable to arbitrary command execution via the cstecgi.cgi setOpModeCfg interface.

There is an arbitrary command execution vulnerability in the setDiagnosisCfg function of the cstecgi .cgi of the TOTOlink A3700R router device in its firmware version V9.1.2u.5822_B20200513.

An issue discovered in D-Link dir815 v.1.01SSb08.bin allows a remote attacker to execute arbitrary code via a crafted POST request to the service parameter in the soapcgi_main function of the cgibin binary component.

A remote unauthenticated attacker who has bypassed authentication could execute arbitrary OS commands to disclose, tamper with, destroy or delete information in Mitsubishi Electric smartRTU, or cause a denial-of service condition on the product.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.

A vulnerability, which was classified as critical, was found in Byzoro Smart S45F Multi-Service Secure Gateway Intelligent Management Platform up to 20230906. Affected is an unknown function of the file /importexport.php. The manipulation of the argument sql leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-239358 is the identifier assigned to this vulnerability.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function that when passed to the CsteSystem function creates a command execution vulnerability.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.

D-Link Go-RT-AC750 revA_v101b03 was discovered to contain a command injection vulnerability via the service parameter at hedwig.cgi.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function that when passed to the CsteSystem function creates a command execution vulnerability.

Deno is a JavaScript, TypeScript, and WebAssembly runtime. From 2.7.0 to 2.7.1, A command injection vulnerability exists in Deno's node:child_process polyfill (shell: true mode) that bypasses the fix for CVE-2026-27190. The two-stage argument sanitization in transformDenoShellCommand (ext/node/polyfills/internal/child_process.ts) has a priority bug: when an argument contains a $VAR pattern, it is wrapped in double quotes (L1290) instead of single quotes. Double quotes in POSIX sh do not suppress backtick command substitution, allowing injected commands to execute. An attacker who controls arguments passed to spawnSync or spawn with shell: true can execute arbitrary OS commands, bypassing Deno's permission system. This vulnerability is fixed in 2.7.2.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.

Flowsint is an open-source OSINT graph exploration tool designed for cybersecurity investigation, transparency, and verification. Flowsint allows a user to create investigations, which are used to manage sketches and analyses. Sketches have controllable graphs, which are comprised of nodes and relationships. The sketches contain information on an OSINT target (usernames, websites, etc) within these nodes and relationships. The nodes can have automated processes execute on them called 'transformers'. A remote attacker can create a sketch, then trigger the 'org_to_asn' transform on an organization node to execute arbitrary OS commands as root on the host machine via shell metacharacters and a docker container escape. Commit b52cbbb904c8013b74308d58af88bc7dbb1b055c appears to remove the code that causes this issue.

OpenClaw versions prior to 2026.2.22 fail to sanitize shell startup environment variables HOME and ZDOTDIR in the system.run function, allowing attackers to bypass command allowlist protections. Remote attackers can inject malicious startup files such as .bash_profile or .zshenv to achieve arbitrary code execution before allowlist-evaluated commands are executed.

Cloud CLI (aka Claude Code UI) is a desktop and mobile UI for Claude Code, Cursor CLI, Codex, and Gemini-CLI. Prior to 1.25.0, OS Command Injection via WebSocket Shell. Both projectPath and initialCommand in server/index.js are taken directly from the WebSocket message payload and interpolated into a bash command string without any sanitization, enabling arbitrary OS command execution. A secondary injection vector exists via unsanitized sessionId. This vulnerability is fixed in 1.25.0.

iCMS 7 attackers to execute arbitrary OS commands via shell metacharacters in the DB_PREFIX parameter to install/install.php.

Os command injection vulnerability in e-solutions e-management. This vulnerability allows an attacker to execute arbitrary commands on the server via the ‘client’ parameter in the /data/apache/e-management/api/api3.php endpoint.

Improper neutralization of special elements used in an os command ('os command injection') in Microsoft Bing Images allows an unauthorized attacker to execute code over a network.

In GL.iNET GL-AR300M routers with firmware v4.3.7, it is possible to inject arbitrary shell commands through a crafted package name in the package information functionality.

tinyfiledialogs (aka tiny file dialogs) before 3.15.0 allows shell metacharacters (such as a backquote or a dollar sign) in titles, messages, and other input data. NOTE: this issue exists because of an incomplete fix for CVE-2020-36767, which only considered single and double quote characters.

An OS command injection vulnerability in user interface in Western Digital My Cloud firmware prior to 5.31.108 on NAS platforms allows remote attackers to execute arbitrary system commands via a specially crafted HTTP POST.

baserCMS is a website development framework. Prior to version 5.2.3, baserCMS has an OS command injection vulnerability in the installer. This issue has been patched in version 5.2.3.

The command auto-approval module in Axon Code contains an OS Command Injection vulnerability, rendering its whitelist security mechanism ineffective. The vulnerability stems from the incorrect use of an incompatible command parser (the Unix-based shell-quote library) to analyze commands on the Windows platform, coupled with a failure to correctly handle Windows CMD-specific escape sequences (^). Attackers can exploit this discrepancy between the parsing logic and the execution environment by constructing payloads such as git log ^" & malicious_command ^". The Axon Code parser is deceived by the escape characters, misinterpreting the malicious command connector (&) as being within a protected string argument and thus auto-approving the command. However, the underlying Windows CMD interpreter ignores the escaped quotes, parsing and executing the subsequent malicious command directly. This allows attackers to achieve arbitrary Remote Code Execution (RCE) after bypassing what appears to be a legitimate Git whitelist check.

Ridvay Code's command auto-approval module contains a critical OS command injection vulnerability that renders its whitelist security mechanism completely ineffective. The system relies on fragile regular expressions to parse command structures; while it attempts to intercept dangerous operations, it fails to account for standard Shell command substitution Ridvay Code (specifically$(...)and backticks ...). An attacker can construct a command such as git log --grep="$(malicious_command)", forcing Syntx to misidentify it as a safe git operation and automatically approve it. The underlying Shell prioritizes the execution of the malicious code injected within the arguments, resulting in Remote Code Execution without any user interaction.

DSAI-Cline's command auto-approval module contains a critical OS command injection vulnerability that renders its whitelist security mechanism completely ineffective. The system relies on string-based parsing to validate commands; while it intercepts dangerous operators such as ;, &&, ||, |, and command substitution patterns, it fails to account for raw newline characters embedded within the input. An attacker can construct a payload by embedding a literal newline between a whitelisted command and malicious code (e.g., git log malicious_command), forcing DSAI-Cline to misidentify it as a safe operation and automatically approve it. The underlying PowerShell interpreter treats the newline as a command separator, executing both commands sequentially, resulting in Remote Code Execution without any user interaction.