SolarWinds N-central before 12.1 SP1 HF5 and 12.2 before SP1 HF2 allows remote attackers to retrieve cleartext domain admin credentials from the Agent & Probe settings, and obtain other sensitive information. The attacker can use a customer ID to self register and read any aspects of the agent/appliance configuration.
In Moxa EDS-G516E Series firmware, Version 5.2 or lower, sensitive information is transmitted over some web applications in cleartext.
On BIG-IP ASM 11.6.1-11.6.5.1, under certain configurations, the BIG-IP system sends data plane traffic to back-end servers unencrypted, even when a Server SSL profile is applied.
SAUTER Controls Nova 200–220 Series with firmware version 3.3-006 and prior and BACnetstac version 4.2.1 and prior have only FTP and Telnet available for device management. Any sensitive information communicated through these protocols, such as credentials, is sent in cleartext. An attacker could obtain sensitive information such as user credentials to gain access to the system.
IBM API Connect V10 is impacted by insecure communications during database replication. As the data replication happens over insecure communication channels, an attacker can view unencrypted data leading to a loss of confidentiality.
An issue was discovered in Arm Mbed TLS before 2.23.0. A remote attacker can recover plaintext because a certain Lucky 13 countermeasure doesn't properly consider the case of a hardware accelerator.
OKI C5510MFP Printer CU H2.15, PU 01.03.01, System F/W 1.01, and Web Page 1.00 sends the configuration of the printer in cleartext, which allows remote attackers to obtain the administrative password by connecting to TCP port 5548 or 7777.
Ecovacs Deebot T10 1.7.2 transmits Wi-Fi credentials in cleartext during the pairing process.
Cleartext transmission of sensitive information via Moxa Service in NPort IA5000A series serial devices. Successfully exploiting the vulnerability could enable attackers to read authentication data, device configuration, and other sensitive data transmitted over Moxa Service.
A flaw was found in the Linux kernel in versions before 5.9-rc7. Traffic between two Geneve endpoints may be unencrypted when IPsec is configured to encrypt traffic for the specific UDP port used by the GENEVE tunnel allowing anyone between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.
In JetBrains Toolbox App before 2.6 unencrypted credential transmission during SSH authentication was possible
This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to transmission of authentication credentials in plaintext over the network. A remote attacker could exploit this vulnerability by eavesdropping on the victim’s network traffic to extract username and password from the web interface (Login Page) of the vulnerable targeted system.
The affected product transmits unencrypted sensitive information, which may allow an attacker to access this information on the NIO 50 (all versions).
The built-in WEB server for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower stores and transmits the credentials of third-party services in cleartext.
The affected Reolink P2P products do not sufficiently protect data transferred between the local device and Reolink servers. This can allow an attacker to access sensitive information, such as camera feeds.
An issue discovereed in EBYTE E880-IR01-V1.1 allows an attacker to obtain sensitive information via crafted POST request to /cgi-bin/luci.
IBM Guardium Data Protection could allow a remote attacker to obtain sensitive information due to cleartext transmission of sensitive credential information.
Jenkins Email Extension Plugin 2.72 and 2.73 transmits and displays the SMTP password in plain text as part of the global Jenkins configuration form, potentially resulting in its exposure.
IBM Cognos Analytics Mobile (iOS) 1.1.0 through 1.1.22 could allow malicious actors to obtain sensitive information due to the cleartext transmission of data.
The API in the Push extension for MediaWiki through 1.35 used cleartext for ApiPush credentials, allowing for potential information disclosure.
In Modem EMM, there is a possible information disclosure due to a missing data encryption. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY00716585; Issue ID: ALPS05886933.
Cleartext Transmission of Sensitive Information vulnerability in BASETech GE-131 BT-1837836 firmware 20180921 exists which could leak sensitive information transmitted between the mobile app and the camera device.
LaraCMS v1.0.1 transmits sensitive information in cleartext which can be intercepted by attackers.
A user running a quick search on a highly forwarded message on WhatsApp for Android from v2.20.108 to v2.20.140 or WhatsApp Business for Android from v2.20.35 to v2.20.49 could have been sent to the Google service over plain HTTP.
bcrypt password hashing in Botan before 2.1.0 does not correctly handle passwords with a length between 57 and 72 characters, which makes it easier for attackers to determine the cleartext password.
Grand MA 300 allows retrieval of the access PIN from sniffed data.
LOYTEC electronics GmbH LINX Configurator (all versions) is vulnerable to Insecure Permissions. An admin credential is passed as a value of URL parameters without encryption, so it allows remote attackers to steal the password and gain full control of Loytec device configuration.
The affected ThroughTek P2P products (SDKs using versions before 3.1.5, any versions with nossl tag, device firmware not using AuthKey for IOTC conneciton, firmware using AVAPI module without enabling DTLS mechanism, and firmware using P2PTunnel or RDT module) do not sufficiently protect data transferred between the local device and ThroughTek servers. This can allow an attacker to access sensitive information, such as camera feeds.
LOYTEC electronics GmbH LINX Configurator (all versions) uses HTTP Basic Authentication, which transmits usernames and passwords in base64-encoded cleartext and allows remote attackers to steal the password and gain full control of Loytec device configuration.
An issue in CloudExplorer Lite 1.3.1 allows an attacker to obtain sensitive information via the login key component.
Procom NetFORCE 800 4.02 M10 Build 20 and possibly other versions sends the NIS password map (passwd.nis) as a file attachment in diagnostic e-mail messages, which allows remote attackers to obtain the cleartext NIS password hashes.
A flaw was found in the Linux kernel's implementation of some networking protocols in IPsec, such as VXLAN and GENEVE tunnels over IPv6. When an encrypted tunnel is created between two hosts, the kernel isn't correctly routing tunneled data over the encrypted link; rather sending the data unencrypted. This would allow anyone in between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.
Baxter PrismaFlex all versions, PrisMax all versions prior to 3.x, The affected devices do not implement data-in-transit encryption (e.g., TLS/SSL) when configured to send treatment data to a PDMS (Patient Data Management System) or an EMR (Electronic Medical Record) system. An attacker could observe sensitive data sent from the device.
Phoenix Hemodialysis Delivery System SW 3.36 and 3.40, The Phoenix Hemodialysis device does not support data-in-transit encryption (e.g., TLS/SSL) when transmitting treatment and prescription data on the network between the Phoenix system and the Exalis dialysis data management tool. An attacker with access to the network could observe sensitive treatment and prescription data sent between the Phoenix system and the Exalis tool.
A vulnerability has been identified in COMOS (All versions < V10.4.4). Caching system in the affected application leaks sensitive information such as user and project information in cleartext via UDP.
Baxter ExactaMix EM 2400 Versions 1.10, 1.11 and ExactaMix EM1200 Versions 1.1, 1.2 systems use cleartext messages to communicate order information with an order entry system. This could allow an attacker with network access to view sensitive data including PHI.
Baxter PrismaFlex all versions, PrisMax all versions prior to 3.x, The affected devices do not implement data-in-transit encryption (e.g., TLS/SSL) when configured to send treatment data to a PDMS (Patient Data Management System) or an EMR (Electronic Medical Record) system. An attacker could observe sensitive data sent from the device.
If Thunderbird is configured to use STARTTLS for an IMAP server, and the server sends a PREAUTH response, then Thunderbird will continue with an unencrypted connection, causing email data to be sent without protection. This vulnerability affects Thunderbird < 68.9.0.
The device uses an unencrypted, proprietary protocol for communication. Through this protocol, configuration data is transmitted and device authentication is performed. An attacker can thereby intercept the authentication hash and use it to log into the device using a pass-the-hash attack.
An issue was discovered in Castle Rock SNMPc Online 12.10.10 before 2020-01-28. It includes the username and password values in cleartext within each request's cookie value.
A CWE-319: Cleartext transmission of sensitive information vulnerability exists in PowerLogic ION7400, ION7650, ION83xx/84xx/85xx/8600, ION8650, ION8800, ION9000 and PM800 (see notification for affected versions), that could cause disclosure of user credentials when a malicious actor intercepts HTTP network traffic between a user and the device.
This vulnerability applies to the Micro Air Vehicle Link (MAVLink) protocol and allows a remote attacker to gain access to sensitive information provided it has access to the communication medium. MAVLink is a header-based protocol that does not perform encryption to improve transfer (and reception speed) and efficiency by design. The increasing popularity of the protocol (used accross different autopilots) has led to its use in wired and wireless mediums through insecure communication channels exposing sensitive information to a remote attacker with ability to intercept network traffic.
All versions of NetMan 204 could allow an unauthenticated remote attacker to read a file (config.cgi) containing sensitive information, like credentials.
A CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists in Modicon M580, Modicon M340, Modicon Premium , Modicon Quantum (all firmware versions), which could cause the disclosure of information when transferring applications to the controller using Modbus TCP protocol.
A cleartext transmission vulnerability exists in the network communication functionality of WAGO e!Cockpit version 1.5.1.1. An attacker with access to network traffic can easily intercept, interpret, and manipulate data coming from, or destined for e!Cockpit. This includes passwords, configurations, and binaries being transferred to endpoints.
IBM Cognos Dashboards on Cloud Pak for Data 4.7.0 exposes sensitive information in environment variables which could aid in further attacks against the system. IBM X-Force ID: 260736.
D-Link DIR-865L Ax 1.20B01 Beta devices have Cleartext Transmission of Sensitive Information.
In phpipam/phpipam version 1.5.1, the Secure attribute for sensitive cookies in HTTPS sessions is not set. This could cause the user agent to send those cookies in plaintext over an HTTP session, potentially exposing sensitive information. The issue is fixed in version 1.7.0.
OpenProject is web-based project management software. For any OpenProject installation, a `robots.txt` file is generated through the server to denote which routes shall or shall not be accessed by crawlers. These routes contain project identifiers of all public projects in the instance. Prior to version 12.5.6, even if the entire instance is marked as `Login required` and prevents all truly anonymous access, the `/robots.txt` route remains publicly available. Version 12.5.6 has a fix for this issue. Alternatively, users can download a patchfile to apply the patch to any OpenProject version greater than 10.0 As a workaround, one may mark any public project as non-public and give anyone in need of access to the project a membership.
In KeePass 2.x before 2.54, it is possible to recover the cleartext master password from a memory dump, even when a workspace is locked or no longer running. The memory dump can be a KeePass process dump, swap file (pagefile.sys), hibernation file (hiberfil.sys), or RAM dump of the entire system. The first character cannot be recovered. In 2.54, there is different API usage and/or random string insertion for mitigation.