In the Linux kernel, the following vulnerability has been resolved: sfc: fix kernel panic when creating VF When creating VFs a kernel panic can happen when calling to efx_ef10_try_update_nic_stats_vf. When releasing a DMA coherent buffer, sometimes, I don't know in what specific circumstances, it has to unmap memory with vunmap. It is disallowed to do that in IRQ context or with BH disabled. Otherwise, we hit this line in vunmap, causing the crash: BUG_ON(in_interrupt()); This patch reenables BH to release the buffer. Log messages when the bug is hit: kernel BUG at mm/vmalloc.c:2727! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G I --------- --- 5.14.0-119.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:vunmap+0x2e/0x30 ...skip... Call Trace: __iommu_dma_free+0x96/0x100 efx_nic_free_buffer+0x2b/0x40 [sfc] efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc] efx_ef10_update_stats_vf+0x18/0x40 [sfc] efx_start_all+0x15e/0x1d0 [sfc] efx_net_open+0x5a/0xe0 [sfc] __dev_open+0xe7/0x1a0 __dev_change_flags+0x1d7/0x240 dev_change_flags+0x21/0x60 ...skip...

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/cs: make commands with 0 chunks illegal behaviour. Submitting a cs with 0 chunks, causes an oops later, found trying to execute the wrong userspace driver. MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo [172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8 [172536.665188] #PF: supervisor read access in kernel mode [172536.665189] #PF: error_code(0x0000) - not-present page [172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0 [172536.665195] Oops: 0000 [#1] SMP NOPTI [172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS [172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015 [172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu] [172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10 [172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246 [172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68 [172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38 [172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40 [172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28 [172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000 [172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0 [172536.665287] Call Trace: [172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm] [172536.665338] drm_ioctl+0x201/0x3b0 [drm] [172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665372] ? selinux_file_ioctl+0x135/0x230 [172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] [172536.665403] __x64_sys_ioctl+0x83/0xb0 [172536.665406] do_syscall_64+0x33/0x40 [172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018

In the Linux kernel, the following vulnerability has been resolved: spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers In case a IRQ based transfer times out the bcm2835_spi_handle_err() function is called. Since commit 1513ceee70f2 ("spi: bcm2835: Drop dma_pending flag") the TX and RX DMA transfers are unconditionally canceled, leading to NULL pointer derefs if ctlr->dma_tx or ctlr->dma_rx are not set. Fix the NULL pointer deref by checking that ctlr->dma_tx and ctlr->dma_rx are valid pointers before accessing them.

A null pointer dereference issue was discovered in fs/io_uring.c in the Linux kernel before 5.15.62. A local user could use this flaw to crash the system or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: ice: always check VF VSI pointer values The ice_get_vf_vsi function can return NULL in some cases, such as if handling messages during a reset where the VSI is being removed and recreated. Several places throughout the driver do not bother to check whether this VSI pointer is valid. Static analysis tools maybe report issues because they detect paths where a potentially NULL pointer could be dereferenced. Fix this by checking the return value of ice_get_vf_vsi everywhere.

In the Linux kernel, the following vulnerability has been resolved: iavf: Fix NULL pointer dereference in iavf_get_link_ksettings Fix possible NULL pointer dereference, due to freeing of adapter->vf_res in iavf_init_get_resources. Previous commit introduced a regression, where receiving IAVF_ERR_ADMIN_QUEUE_NO_WORK from iavf_get_vf_config would free adapter->vf_res. However, netdev is still registered, so ethtool_ops can be called. Calling iavf_get_link_ksettings with no vf_res, will result with: [ 9385.242676] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9385.242683] #PF: supervisor read access in kernel mode [ 9385.242686] #PF: error_code(0x0000) - not-present page [ 9385.242690] PGD 0 P4D 0 [ 9385.242696] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 9385.242701] CPU: 6 PID: 3217 Comm: pmdalinux Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 9385.242708] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 9385.242710] RIP: 0010:iavf_get_link_ksettings+0x29/0xd0 [iavf] [ 9385.242745] Code: 00 0f 1f 44 00 00 b8 01 ef ff ff 48 c7 46 30 00 00 00 00 48 c7 46 38 00 00 00 00 c6 46 0b 00 66 89 46 08 48 8b 87 68 0e 00 00 <f6> 40 08 80 75 50 8b 87 5c 0e 00 00 83 f8 08 74 7a 76 1d 83 f8 20 [ 9385.242749] RSP: 0018:ffffc0560ec7fbd0 EFLAGS: 00010246 [ 9385.242755] RAX: 0000000000000000 RBX: ffffc0560ec7fc08 RCX: 0000000000000000 [ 9385.242759] RDX: ffffffffc0ad4550 RSI: ffffc0560ec7fc08 RDI: ffffa0fc66674000 [ 9385.242762] RBP: 00007ffd1fb2bf50 R08: b6a2d54b892363ee R09: ffffa101dc14fb00 [ 9385.242765] R10: 0000000000000000 R11: 0000000000000004 R12: ffffa0fc66674000 [ 9385.242768] R13: 0000000000000000 R14: ffffa0fc66674000 R15: 00000000ffffffa1 [ 9385.242771] FS: 00007f93711a2980(0000) GS:ffffa0fad72c0000(0000) knlGS:0000000000000000 [ 9385.242775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9385.242778] CR2: 0000000000000008 CR3: 0000000a8e61c003 CR4: 00000000003706e0 [ 9385.242781] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9385.242784] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9385.242787] Call Trace: [ 9385.242791] <TASK> [ 9385.242793] ethtool_get_settings+0x71/0x1a0 [ 9385.242814] __dev_ethtool+0x426/0x2f40 [ 9385.242823] ? slab_post_alloc_hook+0x4f/0x280 [ 9385.242836] ? kmem_cache_alloc_trace+0x15d/0x2f0 [ 9385.242841] ? dev_ethtool+0x59/0x170 [ 9385.242848] dev_ethtool+0xa7/0x170 [ 9385.242856] dev_ioctl+0xc3/0x520 [ 9385.242866] sock_do_ioctl+0xa0/0xe0 [ 9385.242877] sock_ioctl+0x22f/0x320 [ 9385.242885] __x64_sys_ioctl+0x84/0xc0 [ 9385.242896] do_syscall_64+0x3a/0x80 [ 9385.242904] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 9385.242918] RIP: 0033:0x7f93702396db [ 9385.242923] Code: 73 01 c3 48 8b 0d ad 57 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 57 38 00 f7 d8 64 89 01 48 [ 9385.242927] RSP: 002b:00007ffd1fb2bf18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 9385.242932] RAX: ffffffffffffffda RBX: 000055671b1d2fe0 RCX: 00007f93702396db [ 9385.242935] RDX: 00007ffd1fb2bf20 RSI: 0000000000008946 RDI: 0000000000000007 [ 9385.242937] RBP: 00007ffd1fb2bf20 R08: 0000000000000003 R09: 0030763066307330 [ 9385.242940] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd1fb2bf80 [ 9385.242942] R13: 0000000000000007 R14: 0000556719f6de90 R15: 00007ffd1fb2c1b0 [ 9385.242948] </TASK> [ 9385.242949] Modules linked in: iavf(E) xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_compat nf_nat_tftp nft_objref nf_conntrack_tftp bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink vfat fat irdma ib_uverbs ib_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretem ---truncated---

In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rx_register() It causes NULL pointer dereference when testing as following: (a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket. (b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device). (c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket. (d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket. The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue. The following is the stack information: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: crypto: octeontx2 - remove CONFIG_DM_CRYPT check No issues were found while using the driver with dm-crypt enabled. So CONFIG_DM_CRYPT check in the driver can be removed. This also fixes the NULL pointer dereference in driver release if CONFIG_DM_CRYPT is enabled. ... Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... Call trace: crypto_unregister_alg+0x68/0xfc crypto_unregister_skciphers+0x44/0x60 otx2_cpt_crypto_exit+0x100/0x1a0 otx2_cptvf_remove+0xf8/0x200 pci_device_remove+0x3c/0xd4 __device_release_driver+0x188/0x234 device_release_driver+0x2c/0x4c ...

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: initialize device's zone info for seeding When performing seeding on a zoned filesystem it is necessary to initialize each zoned device's btrfs_zoned_device_info structure, otherwise mounting the filesystem will cause a NULL pointer dereference. This was uncovered by fstests' testcase btrfs/163.

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: fix race between xmit and reset There is a race between reset and the transmit paths that can lead to ibmvnic_xmit() accessing an scrq after it has been freed in the reset path. It can result in a crash like: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0080000016189f8 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic] LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 Call Trace: [c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable) [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c9cfcc] sch_direct_xmit+0xec/0x330 [c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0 [c000000000c00ad4] __dev_queue_xmit+0x394/0x730 [c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding] [c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding] [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c00ca4] __dev_queue_xmit+0x564/0x730 [c000000000cf97e0] neigh_hh_output+0xd0/0x180 [c000000000cfa69c] ip_finish_output2+0x31c/0x5c0 [c000000000cfd244] __ip_queue_xmit+0x194/0x4f0 [c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0 [c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0 [c000000000d2d984] tcp_retransmit_skb+0x34/0x130 [c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0 [c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330 [c000000000d317bc] tcp_write_timer+0x5c/0x200 [c000000000243270] call_timer_fn+0x50/0x1c0 [c000000000243704] __run_timers.part.0+0x324/0x460 [c000000000243894] run_timer_softirq+0x54/0xa0 [c000000000ea713c] __do_softirq+0x15c/0x3e0 [c000000000166258] __irq_exit_rcu+0x158/0x190 [c000000000166420] irq_exit+0x20/0x40 [c00000000002853c] timer_interrupt+0x14c/0x2b0 [c000000000009a00] decrementer_common_virt+0x210/0x220 --- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c The immediate cause of the crash is the access of tx_scrq in the following snippet during a reset, where the tx_scrq can be either NULL or an address that will soon be invalid: ibmvnic_xmit() { ... tx_scrq = adapter->tx_scrq[queue_num]; txq = netdev_get_tx_queue(netdev, queue_num); ind_bufp = &tx_scrq->ind_buf; if (test_bit(0, &adapter->resetting)) { ... } But beyond that, the call to ibmvnic_xmit() itself is not safe during a reset and the reset path attempts to avoid this by stopping the queue in ibmvnic_cleanup(). However just after the queue was stopped, an in-flight ibmvnic_complete_tx() could have restarted the queue even as the reset is progressing. Since the queue was restarted we could get a call to ibmvnic_xmit() which can then access the bad tx_scrq (or other fields). We cannot however simply have ibmvnic_complete_tx() check the ->resetting bit and skip starting the queue. This can race at the "back-end" of a good reset which just restarted the queue but has not cleared the ->resetting bit yet. If we skip restarting the queue due to ->resetting being true, the queue would remain stopped indefinitely potentially leading to transmit timeouts. IOW ->resetting is too broad for this purpose. Instead use a new flag that indicates whether or not the queues are active. Only the open/ reset paths control when the queues are active. ibmvnic_complete_tx() and others wake up the queue only if the queue is marked active. So we will have: A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open() ->resetting = true ->tx_queues_active = false disable tx queues ... ->tx_queues_active = true start tx queues B. Tx interrupt in ibmvnic_complete_tx(): if (->tx_queues_active) netif_wake_subqueue(); To ensure that ->tx_queues_active and state of the queues are consistent, we need a lock which: - must also be taken in the interrupt path (ibmvnic_complete_tx()) - shared across the multiple ---truncated---

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix dereference of stale list iterator after loop body The list iterator variable will be a bogus pointer if no break was hit. Dereferencing it (cur->page in this case) could load an out-of-bounds/undefined value making it unsafe to use that in the comparision to determine if the specific element was found. Since 'cur->page' *can* be out-ouf-bounds it cannot be guaranteed that by chance (or intention of an attacker) it matches the value of 'page' even though the correct element was not found. This is fixed by using a separate list iterator variable for the loop and only setting the original variable if a suitable element was found. Then determing if the element was found is simply checking if the variable is set.

IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_ibm_upload.

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Fix NULL pointer dereference when printing dev_name When larbdev is NULL (in the case I hit, the node is incorrectly set iommus = <&iommu NUM>), it will cause device_link_add() fail and kernel crashes when we try to print dev_name(larbdev). Let's fail the probe if a larbdev is NULL to avoid invalid inputs from dts. It should work for normal correct setting and avoid the crash caused by my incorrect setting. Error log: [ 18.189042][ T301] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 ... [ 18.344519][ T301] pstate: a0400005 (NzCv daif +PAN -UAO) [ 18.345213][ T301] pc : mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu] [ 18.346050][ T301] lr : mtk_iommu_probe_device+0xd0/0x118 [mtk_iommu] [ 18.346884][ T301] sp : ffffffc00a5635e0 [ 18.347392][ T301] x29: ffffffc00a5635e0 x28: ffffffd44a46c1d8 [ 18.348156][ T301] x27: ffffff80c39a8000 x26: ffffffd44a80cc38 [ 18.348917][ T301] x25: 0000000000000000 x24: ffffffd44a80cc38 [ 18.349677][ T301] x23: ffffffd44e4da4c6 x22: ffffffd44a80cc38 [ 18.350438][ T301] x21: ffffff80cecd1880 x20: 0000000000000000 [ 18.351198][ T301] x19: ffffff80c439f010 x18: ffffffc00a50d0c0 [ 18.351959][ T301] x17: ffffffffffffffff x16: 0000000000000004 [ 18.352719][ T301] x15: 0000000000000004 x14: ffffffd44eb5d420 [ 18.353480][ T301] x13: 0000000000000ad2 x12: 0000000000000003 [ 18.354241][ T301] x11: 00000000fffffad2 x10: c0000000fffffad2 [ 18.355003][ T301] x9 : a0d288d8d7142d00 x8 : a0d288d8d7142d00 [ 18.355763][ T301] x7 : ffffffd44c2bc640 x6 : 0000000000000000 [ 18.356524][ T301] x5 : 0000000000000080 x4 : 0000000000000001 [ 18.357284][ T301] x3 : 0000000000000000 x2 : 0000000000000005 [ 18.358045][ T301] x1 : 0000000000000000 x0 : 0000000000000000 [ 18.360208][ T301] Hardware name: MT6873 (DT) [ 18.360771][ T301] Call trace: [ 18.361168][ T301] dump_backtrace+0xf8/0x1f0 [ 18.361737][ T301] dump_stack_lvl+0xa8/0x11c [ 18.362305][ T301] dump_stack+0x1c/0x2c [ 18.362816][ T301] mrdump_common_die+0x184/0x40c [mrdump] [ 18.363575][ T301] ipanic_die+0x24/0x38 [mrdump] [ 18.364230][ T301] atomic_notifier_call_chain+0x128/0x2b8 [ 18.364937][ T301] die+0x16c/0x568 [ 18.365394][ T301] __do_kernel_fault+0x1e8/0x214 [ 18.365402][ T301] do_page_fault+0xb8/0x678 [ 18.366934][ T301] do_translation_fault+0x48/0x64 [ 18.368645][ T301] do_mem_abort+0x68/0x148 [ 18.368652][ T301] el1_abort+0x40/0x64 [ 18.368660][ T301] el1h_64_sync_handler+0x54/0x88 [ 18.368668][ T301] el1h_64_sync+0x68/0x6c [ 18.368673][ T301] mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu] ...

The kvm_vm_ioctl_check_extension function in arch/powerpc/kvm/powerpc.c in the Linux kernel before 4.13.11 allows local users to cause a denial of service (NULL pointer dereference and system crash) via a KVM_CHECK_EXTENSION KVM_CAP_PPC_HTM ioctl call to /dev/kvm.

In the Linux kernel, the following vulnerability has been resolved: soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc The allocation funciton devm_kcalloc may fail and return a null pointer, which would cause a null-pointer dereference later. It might be better to check it and directly return -ENOMEM just like the usage of devm_kcalloc in previous code.

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_transport_sas: Fix error handling in sas_phy_add() If transport_add_device() fails in sas_phy_add(), the kernel will crash trying to delete the device in transport_remove_device() called from sas_remove_host(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 61 PID: 42829 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc1+ #173 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_phy_delete+0x30/0x60 [scsi_transport_sas] do_sas_phy_delete+0x6c/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x40/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] hisi_sas_remove+0x40/0x68 [hisi_sas_main] hisi_sas_v2_remove+0x20/0x30 [hisi_sas_v2_hw] platform_remove+0x2c/0x60 Fix this by checking and handling return value of transport_add_device() in sas_phy_add().

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix race at SNDCTL_DSP_SYNC There is a small race window at snd_pcm_oss_sync() that is called from OSS PCM SNDCTL_DSP_SYNC ioctl; namely the function calls snd_pcm_oss_make_ready() at first, then takes the params_lock mutex for the rest. When the stream is set up again by another thread between them, it leads to inconsistency, and may result in unexpected results such as NULL dereference of OSS buffer as a fuzzer spotted recently. The fix is simply to cover snd_pcm_oss_make_ready() call into the same params_lock mutex with snd_pcm_oss_make_ready_locked() variant.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp5: Return error code in mdp5_pipe_release when deadlock is detected mdp5_get_global_state runs the risk of hitting a -EDEADLK when acquiring the modeset lock, but currently mdp5_pipe_release doesn't check for if an error is returned. Because of this, there is a possibility of mdp5_pipe_release hitting a NULL dereference error. To avoid this, let's have mdp5_pipe_release check if mdp5_get_global_state returns an error and propogate that error. Changes since v1: - Separated declaration and initialization of *new_state to avoid compiler warning - Fixed some spelling mistakes in commit message Changes since v2: - Return 0 in case where hwpipe is NULL as this is considered normal behavior - Added 2nd patch in series to fix a similar NULL dereference issue in mdp5_mixer_release Patchwork: https://patchwork.freedesktop.org/patch/485179/

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes() In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode() is assigned to mode and is passed to drm_mode_probed_add() directly after that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and there is a dereference of it in list_add_tail() without recoveries, which could lead to NULL pointer dereference on failure of amdgpu_dm_create_common_mode(). Fix this by adding a NULL check of mode. This bug was found by a static analyzer. Builds with 'make allyesconfig' show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: vop: fix possible null-ptr-deref in vop_bind() It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() pdesc could be null but still dereference pdesc->name and it will lead to a null pointer access. So we move a null check before dereference.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a NULL pointer dereference when failed to start a new trasacntion [BUG] Syzbot reported a NULL pointer dereference with the following crash: FAULT_INJECTION: forcing a failure. start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676 prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642 relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678 ... BTRFS info (device loop0): balance: ended with status: -12 Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667] RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926 Call Trace: <TASK> commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496 btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430 del_balance_item fs/btrfs/volumes.c:3678 [inline] reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742 btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [CAUSE] The allocation failure happens at the start_transaction() inside prepare_to_relocate(), and during the error handling we call unset_reloc_control(), which makes fs_info->balance_ctl to be NULL. Then we continue the error path cleanup in btrfs_balance() by calling reset_balance_state() which will call del_balance_item() to fully delete the balance item in the root tree. However during the small window between set_reloc_contrl() and unset_reloc_control(), we can have a subvolume tree update and created a reloc_root for that subvolume. Then we go into the final btrfs_commit_transaction() of del_balance_item(), and into btrfs_update_reloc_root() inside commit_fs_roots(). That function checks if fs_info->reloc_ctl is in the merge_reloc_tree stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer dereference. [FIX] Just add extra check on fs_info->reloc_ctl inside btrfs_update_reloc_root(), before checking fs_info->reloc_ctl->merge_reloc_tree. That DEAD_RELOC_TREE handling is to prevent further modification to the reloc tree during merge stage, but since there is no reloc_ctl at all, we do not need to bother that.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP Weiming Shi says: xt_match and xt_target structs registered with NFPROTO_UNSPEC can be loaded by any protocol family through nft_compat. When such a match/target sets .hooks to restrict which hooks it may run on, the bitmask uses NF_INET_* constants. This is only correct for families whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge all share the same five hooks (PRE_ROUTING ... POST_ROUTING). ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks validation silently passes for the wrong reasons, allowing matches to run on ARP chains where the hook assumptions (e.g. state->in being set on input hooks) do not hold. This leads to NULL pointer dereferences; xt_devgroup is one concrete example: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] RIP: 0010:devgroup_mt+0xff/0x350 Call Trace: <TASK> nft_match_eval (net/netfilter/nft_compat.c:407) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61) nf_hook_slow (net/netfilter/core.c:623) arp_xmit (net/ipv4/arp.c:666) </TASK> Kernel panic - not syncing: Fatal exception in interrupt Fix it by restricting arptables to NFPROTO_ARP extensions only. Note that arptables-legacy only supports: - arpt_CLASSIFY - arpt_mangle - arpt_MARK that provide explicit NFPROTO_ARP match/target declarations.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: fix possible null-ptr-deref in arm_smmu_device_probe() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent bad output lengths in smb2_ioctl_query_info() When calling smb2_ioctl_query_info() with smb_query_info::flags=PASSTHRU_FSCTL and smb_query_info::output_buffer_length=0, the following would return 0x10 buffer = memdup_user(arg + sizeof(struct smb_query_info), qi.output_buffer_length); if (IS_ERR(buffer)) { kfree(vars); return PTR_ERR(buffer); } rather than a valid pointer thus making IS_ERR() check fail. This would then cause a NULL ptr deference in @buffer when accessing it later in smb2_ioctl_query_ioctl(). While at it, prevent having a @buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO FileEndOfFileInformation requests when smb_query_info::flags=PASSTHRU_SET_INFO. Here is a small C reproducer which triggers a NULL ptr in @buffer when passing an invalid smb_query_info::flags #include <stdio.h> #include <stdlib.h> #include <stdint.h> #include <unistd.h> #include <fcntl.h> #include <sys/ioctl.h> #define die(s) perror(s), exit(1) #define QUERY_INFO 0xc018cf07 int main(int argc, char *argv[]) { int fd; if (argc < 2) exit(1); fd = open(argv[1], O_RDONLY); if (fd == -1) die("open"); if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1) die("ioctl"); close(fd); return 0; } mount.cifs //srv/share /mnt -o ... gcc repro.c && ./a.out /mnt/f0 [ 114.138620] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 114.139310] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 114.139775] CPU: 2 PID: 995 Comm: a.out Not tainted 5.17.0-rc8 #1 [ 114.140148] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 114.140818] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs] [ 114.141221] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24 [ 114.142348] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256 [ 114.142692] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d [ 114.143119] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380 [ 114.143544] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003 [ 114.143983] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288 [ 114.144424] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000 [ 114.144852] FS: 00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000 [ 114.145338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 114.145692] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0 [ 114.146131] Call Trace: [ 114.146291] <TASK> [ 114.146432] ? smb2_query_reparse_tag+0x890/0x890 [cifs] [ 114.146800] ? cifs_mapchar+0x460/0x460 [cifs] [ 114.147121] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.147412] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs] [ 114.147775] ? dentry_path_raw+0xa6/0xf0 [ 114.148024] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs] [ 114.148413] ? smb2_check_message+0x1080/0x1080 [cifs] [ 114.148766] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.149065] cifs_ioctl+0x1577/0x3320 [cifs] [ 114.149371] ? lock_downgrade+0x6f0/0x6f0 [ 114.149631] ? cifs_readdir+0x2e60/0x2e60 [cifs] [ 114.149956] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.150250] ? __rseq_handle_notify_resume+0x80b/0xbe0 [ 114.150562] ? __up_read+0x192/0x710 [ 114.150791] ? __ia32_sys_rseq+0xf0/0xf0 [ 114.151025] ? __x64_sys_openat+0x11f/0x1d0 [ 114.151296] __x64_sys_ioctl+0x127/0x190 [ 114.151549] do_syscall_64+0x3b/0x90 [ 114.151768] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 114.152079] RIP: 0033:0x7f7aead043df [ 114.152306] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ALSA: jack: Access input_dev under mutex It is possible when using ASoC that input_dev is unregistered while calling snd_jack_report, which causes NULL pointer dereference. In order to prevent this serialize access to input_dev using mutex lock.

In the Linux kernel, the following vulnerability has been resolved: tee: add overflow check in register_shm_helper() With special lengths supplied by user space, register_shm_helper() has an integer overflow when calculating the number of pages covered by a supplied user space memory region. This causes internal_get_user_pages_fast() a helper function of pin_user_pages_fast() to do a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Modules linked in: CPU: 1 PID: 173 Comm: optee_example_a Not tainted 5.19.0 #11 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pc : internal_get_user_pages_fast+0x474/0xa80 Call trace: internal_get_user_pages_fast+0x474/0xa80 pin_user_pages_fast+0x24/0x4c register_shm_helper+0x194/0x330 tee_shm_register_user_buf+0x78/0x120 tee_ioctl+0xd0/0x11a0 __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 Fix this by adding an an explicit call to access_ok() in tee_shm_register_user_buf() to catch an invalid user space address early.

In the Linux kernel, the following vulnerability has been resolved: xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue xenvif_rx_next_skb() is expecting the rx queue not being empty, but in case the loop in xenvif_rx_action() is doing multiple iterations, the availability of another skb in the rx queue is not being checked. This can lead to crashes: [40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.537534] PGD 0 P4D 0 [40072.537644] Oops: 0000 [#1] SMP NOPTI [40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5 [40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021 [40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000 [40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246 [40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7 [40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8 [40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008 [40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708 [40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0 [40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000 [40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660 [40072.539211] Call Trace: [40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback] [40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback] Fix that by stopping the loop in case the rx queue becomes empty.

In the Linux kernel, the following vulnerability has been resolved: ata: libata-transport: fix error handling in ata_tdev_add() In ata_tdev_add(), the return value of transport_add_device() is not checked. As a result, it causes null-ptr-deref while removing the module, because transport_remove_device() is called to remove the device that was not added. Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #36 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x48/0x3a0 lr : device_del+0x44/0x3a0 Call trace: device_del+0x48/0x3a0 attribute_container_class_device_del+0x28/0x40 transport_remove_classdev+0x60/0x7c attribute_container_device_trigger+0x118/0x120 transport_remove_device+0x20/0x30 ata_tdev_delete+0x24/0x50 [libata] ata_tlink_delete+0x40/0xa0 [libata] ata_tport_delete+0x2c/0x60 [libata] ata_port_detach+0x148/0x1b0 [libata] ata_pci_remove_one+0x50/0x80 [libata] ahci_remove_one+0x4c/0x8c [ahci] Fix this by checking and handling return value of transport_add_device() in ata_tdev_add(). In the error path, device_del() is called to delete the device which was added earlier in this function, and ata_tdev_free() is called to free ata_dev.

In the Linux kernel, the following vulnerability has been resolved: KVM: Don't null dereference ops->destroy A KVM device cleanup happens in either of two callbacks: 1) destroy() which is called when the VM is being destroyed; 2) release() which is called when a device fd is closed. Most KVM devices use 1) but Book3s's interrupt controller KVM devices (XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during the machine execution. The error handling in kvm_ioctl_create_device() assumes destroy() is always defined which leads to NULL dereference as discovered by Syzkaller. This adds a checks for destroy!=NULL and adds a missing release(). This is not changing kvm_destroy_devices() as devices with defined release() should have been removed from the KVM devices list by then.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix null pointer dereference in ftrace_add_mod() The @ftrace_mod is allocated by kzalloc(), so both the members {prev,next} of @ftrace_mode->list are NULL, it's not a valid state to call list_del(). If kstrdup() for @ftrace_mod->{func|module} fails, it goes to @out_free tag and calls free_ftrace_mod() to destroy @ftrace_mod, then list_del() will write prev->next and next->prev, where null pointer dereference happens. BUG: kernel NULL pointer dereference, address: 0000000000000008 Oops: 0002 [#1] PREEMPT SMP NOPTI Call Trace: <TASK> ftrace_mod_callback+0x20d/0x220 ? do_filp_open+0xd9/0x140 ftrace_process_regex.isra.51+0xbf/0x130 ftrace_regex_write.isra.52.part.53+0x6e/0x90 vfs_write+0xee/0x3a0 ? __audit_filter_op+0xb1/0x100 ? auditd_test_task+0x38/0x50 ksys_write+0xa5/0xe0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Kernel panic - not syncing: Fatal exception So call INIT_LIST_HEAD() to initialize the list member to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereferences without iommu Check if 'aspace' is set before using it as it will stay null without IOMMU, such as on msm8974.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix missing i_op in ntfs_read_mft There is null pointer dereference because i_op == NULL. The bug happens because we don't initialize i_op for records in $Extend.

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Correctly move list in sc_disable() Commit 13bac861952a ("IB/hfi1: Fix abba locking issue with sc_disable()") incorrectly tries to move a list from one list head to another. The result is a kernel crash. The crash is triggered when a link goes down and there are waiters for a send to complete. The following signature is seen: BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] Call Trace: sc_disable+0x1ba/0x240 [hfi1] pio_freeze+0x3d/0x60 [hfi1] handle_freeze+0x27/0x1b0 [hfi1] process_one_work+0x1b0/0x380 ? process_one_work+0x380/0x380 worker_thread+0x30/0x360 ? process_one_work+0x380/0x380 kthread+0xd7/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 The fix is to use the correct call to move the list.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix NULL pointer dereference in dsa_port_reset_vlan_filtering The "ds" iterator variable used in dsa_port_reset_vlan_filtering() -> dsa_switch_for_each_port() overwrites the "dp" received as argument, which is later used to call dsa_port_vlan_filtering() proper. As a result, switches which do enter that code path (the ones with vlan_filtering_is_global=true) will dereference an invalid dp in dsa_port_reset_vlan_filtering() after leaving a VLAN-aware bridge. Use a dedicated "other_dp" iterator variable to avoid this from happening.

In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_blk: set number of address spaces and virtqueue groups Commit bda324fd037a ("vdpasim: control virtqueue support") added two new fields (nas, ngroups) to vdpasim_dev_attr, but we forgot to initialize them for vdpa_sim_blk. When creating a new vdpa_sim_blk device this causes the kernel to panic in this way:    $ vdpa dev add mgmtdev vdpasim_blk name blk0    BUG: kernel NULL pointer dereference, address: 0000000000000030    ...    RIP: 0010:vhost_iotlb_add_range_ctx+0x41/0x220 [vhost_iotlb]    ...    Call Trace:     <TASK>     vhost_iotlb_add_range+0x11/0x800 [vhost_iotlb]     vdpasim_map_range+0x91/0xd0 [vdpa_sim]     vdpasim_alloc_coherent+0x56/0x90 [vdpa_sim]     ... This happens because vdpasim->iommu[0] is not initialized when dev_attr.nas is 0. Let's fix this issue by initializing both (nas, ngroups) to 1 for vdpa_sim_blk.

In the Linux kernel, the following vulnerability has been resolved: tpm: use try_get_ops() in tpm-space.c As part of the series conversion to remove nested TPM operations: https://lore.kernel.org/all/20190205224723.19671-1-jarkko.sakkinen@linux.intel.com/ exposure of the chip->tpm_mutex was removed from much of the upper level code. In this conversion, tpm2_del_space() was missed. This didn't matter much because it's usually called closely after a converted operation, so there's only a very tiny race window where the chip can be removed before the space flushing is done which causes a NULL deref on the mutex. However, there are reports of this window being hit in practice, so fix this by converting tpm2_del_space() to use tpm_try_get_ops(), which performs all the teardown checks before acquring the mutex.

In the Linux kernel, the following vulnerability has been resolved: locking/csd_lock: Change csdlock_debug from early_param to __setup The csdlock_debug kernel-boot parameter is parsed by the early_param() function csdlock_debug(). If set, csdlock_debug() invokes static_branch_enable() to enable csd_lock_wait feature, which triggers a panic on arm64 for kernels built with CONFIG_SPARSEMEM=y and CONFIG_SPARSEMEM_VMEMMAP=n. With CONFIG_SPARSEMEM_VMEMMAP=n, __nr_to_section is called in static_key_enable() and returns NULL, resulting in a NULL dereference because mem_section is initialized only later in sparse_init(). This is also a problem for powerpc because early_param() functions are invoked earlier than jump_label_init(), also resulting in static_key_enable() failures. These failures cause the warning "static key 'xxx' used before call to jump_label_init()". Thus, early_param is too early for csd_lock_wait to run static_branch_enable(), so changes it to __setup to fix these.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Address NULL pointer dereference after starget_to_rport() Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference.

In the Linux kernel, the following vulnerability has been resolved: USB: host: isp116x: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix null-ptr-deref in hci_uart_write_work hci_uart_set_proto() sets HCI_UART_PROTO_INIT before calling hci_uart_register_dev(), which calls proto->open() to initialize hu->priv. However, if a TTY write wakeup occurs during this window, hci_uart_tx_wakeup() may schedule write_work before hu->priv is initialized, leading to a NULL pointer dereference in hci_uart_write_work() when proto->dequeue() accesses hu->priv. The race condition is: CPU0 CPU1 ---- ---- hci_uart_set_proto() set_bit(HCI_UART_PROTO_INIT) hci_uart_register_dev() tty write wakeup hci_uart_tty_wakeup() hci_uart_tx_wakeup() schedule_work(&hu->write_work) proto->open(hu) // initializes hu->priv hci_uart_write_work() hci_uart_dequeue() proto->dequeue(hu) // accesses hu->priv (NULL!) Fix this by moving set_bit(HCI_UART_PROTO_INIT) after proto->open() succeeds, ensuring hu->priv is initialized before any work can be scheduled.

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags In nvme_alloc_admin_tags, the admin_q can be set to an error (typically -ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which is checked immediately after the call. However, when we return the error message up the stack, to nvme_reset_work the error takes us to nvme_remove_dead_ctrl() nvme_dev_disable() nvme_suspend_queue(&dev->queues[0]). Here, we only check that the admin_q is non-NULL, rather than not an error or NULL, and begin quiescing a queue that never existed, leading to bad / NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: xfs: check for deleted cursors when revalidating two btrees The free space and inode btree repair functions will rebuild both btrees at the same time, after which it needs to evaluate both btrees to confirm that the corruptions are gone. However, Jiaming Zhang ran syzbot and produced a crash in the second xchk_allocbt call. His root-cause analysis is as follows (with minor corrections): In xrep_revalidate_allocbt(), xchk_allocbt() is called twice (first for BNOBT, second for CNTBT). The cause of this issue is that the first call nullified the cursor required by the second call. Let's first enter xrep_revalidate_allocbt() via following call chain: xfs_file_ioctl() -> xfs_ioc_scrubv_metadata() -> xfs_scrub_metadata() -> `sc->ops->repair_eval(sc)` -> xrep_revalidate_allocbt() xchk_allocbt() is called twice in this function. In the first call: /* Note that sc->sm->sm_type is XFS_SCRUB_TYPE_BNOPT now */ xchk_allocbt() -> xchk_btree() -> `bs->scrub_rec(bs, recp)` -> xchk_allocbt_rec() -> xchk_allocbt_xref() -> xchk_allocbt_xref_other() since sm_type is XFS_SCRUB_TYPE_BNOBT, pur is set to &sc->sa.cnt_cur. Kernel called xfs_alloc_get_rec() and returned -EFSCORRUPTED. Call chain: xfs_alloc_get_rec() -> xfs_btree_get_rec() -> xfs_btree_check_block() -> (XFS_IS_CORRUPT || XFS_TEST_ERROR), the former is false and the latter is true, return -EFSCORRUPTED. This should be caused by ioctl$XFS_IOC_ERROR_INJECTION I guess. Back to xchk_allocbt_xref_other(), after receiving -EFSCORRUPTED from xfs_alloc_get_rec(), kernel called xchk_should_check_xref(). In this function, *curpp (points to sc->sa.cnt_cur) is nullified. Back to xrep_revalidate_allocbt(), since sc->sa.cnt_cur has been nullified, it then triggered null-ptr-deref via xchk_allocbt() (second call) -> xchk_btree(). So. The bnobt revalidation failed on a cross-reference attempt, so we deleted the cntbt cursor, and then crashed when we tried to revalidate the cntbt. Therefore, check for a null cntbt cursor before that revalidation, and mark the repair incomplete. Also we can ignore the second tree entirely if the first tree was rebuilt but is already corrupt. Apply the same fix to xrep_revalidate_iallocbt because it has the same problem.

In the Linux kernel, the following vulnerability has been resolved: HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them In commit 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at raw event handle"), we handle the fact that raw event callbacks can happen even for a HID device that has not been "claimed" causing a crash if a broken device were attempted to be connected to the system. Fix up the remaining in-tree HID drivers that forgot to add this same check to resolve the same issue.

In the Linux kernel, the following vulnerability has been resolved: HID: pidff: Fix condition effect bit clearing As reported by MPDarkGuy on discord, NULL pointer dereferences were happening because not all the conditional effects bits were cleared. Properly clear all conditional effect bits from ffbit

In the Linux kernel, the following vulnerability has been resolved: ceph: fix NULL pointer dereference in ceph_mds_auth_match() The CephFS kernel client has regression starting from 6.18-rc1. We have issue in ceph_mds_auth_match() if fs_name == NULL: const char fs_name = mdsc->fsc->mount_options->mds_namespace; ... if (auth->match.fs_name && strcmp(auth->match.fs_name, fs_name)) { / fsname mismatch, try next one */ return 0; } Patrick Donnelly suggested that: In summary, we should definitely start decoding `fs_name` from the MDSMap and do strict authorizations checks against it. Note that the `-o mds_namespace=foo` should only be used for selecting the file system to mount and nothing else. It's possible no mds_namespace is specified but the kernel will mount the only file system that exists which may have name "foo". This patch reworks ceph_mdsmap_decode() and namespace_equals() with the goal of supporting the suggested concept. Now struct ceph_mdsmap contains m_fs_name field that receives copy of extracted FS name by ceph_extract_encoded_string(). For the case of "old" CephFS file systems, it is used "cephfs" name. [ idryomov: replace redundant %*pE with %s in ceph_mdsmap_decode(), get rid of a series of strlen() calls in ceph_namespace_match(), drop changes to namespace_equals() body to avoid treating empty mds_namespace as equal, drop changes to ceph_mdsc_handle_fsmap() as namespace_equals() isn't an equivalent substitution there ]

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. Then, if neigh_suppress is enabled and an ICMPv6 Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will dereference ipv6_stub->nd_tbl which is NULL, passing it to neigh_lookup(). This causes a kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000268 Oops: 0000 [#1] PREEMPT SMP NOPTI [...] RIP: 0010:neigh_lookup+0x16/0xe0 [...] Call Trace: <IRQ> ? neigh_lookup+0x16/0xe0 br_do_suppress_nd+0x160/0x290 [bridge] br_handle_frame_finish+0x500/0x620 [bridge] br_handle_frame+0x353/0x440 [bridge] __netif_receive_skb_core.constprop.0+0x298/0x1110 __netif_receive_skb_one_core+0x3d/0xa0 process_backlog+0xa0/0x140 __napi_poll+0x2c/0x170 net_rx_action+0x2c4/0x3a0 handle_softirqs+0xd0/0x270 do_softirq+0x3f/0x60 Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in the callers. This is in essence disabling NS/NA suppression when IPv6 is disabled.

In the Linux kernel, the following vulnerability has been resolved: tracing: kprobe: Fix potential null-ptr-deref on trace_array in kprobe_event_gen_test_exit() When test_gen_kprobe_cmd() failed after kprobe_event_gen_cmd_end(), it will goto delete, which will call kprobe_event_delete() and release the corresponding resource. However, the trace_array in gen_kretprobe_test will point to the invalid resource. Set gen_kretprobe_test to NULL after called kprobe_event_delete() to prevent null-ptr-deref. BUG: kernel NULL pointer dereference, address: 0000000000000070 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 246 Comm: modprobe Tainted: G W 6.1.0-rc1-00174-g9522dc5c87da-dirty #248 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:__ftrace_set_clr_event_nolock+0x53/0x1b0 Code: e8 82 26 fc ff 49 8b 1e c7 44 24 0c ea ff ff ff 49 39 de 0f 84 3c 01 00 00 c7 44 24 18 00 00 00 00 e8 61 26 fc ff 48 8b 6b 10 <44> 8b 65 70 4c 8b 6d 18 41 f7 c4 00 02 00 00 75 2f RSP: 0018:ffffc9000159fe00 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88810971d268 RCX: 0000000000000000 RDX: ffff8881080be600 RSI: ffffffff811b48ff RDI: ffff88810971d058 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc9000159fe58 R11: 0000000000000001 R12: ffffffffa0001064 R13: ffffffffa000106c R14: ffff88810971d238 R15: 0000000000000000 FS: 00007f89eeff6540(0000) GS:ffff88813b600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000010599e004 CR4: 0000000000330ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __ftrace_set_clr_event+0x3e/0x60 trace_array_set_clr_event+0x35/0x50 ? 0xffffffffa0000000 kprobe_event_gen_test_exit+0xcd/0x10b [kprobe_event_gen_test] __x64_sys_delete_module+0x206/0x380 ? lockdep_hardirqs_on_prepare+0xd8/0x190 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f89eeb061b7