In the Linux kernel, the following vulnerability has been resolved: serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait' In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls 'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the firmware don't exists, function just return without initializing ports of 'rp2_card'. But now the interrupt handler function has been registered, and when an interrupt comes, 'rp2_uart_interrupt' may access those ports then causing NULL pointer dereference or other bugs. Because the driver does some initialization work in 'rp2_fw_cb', in order to make the driver ready to handle interrupts, 'request_firmware' should be used instead of asynchronous 'request_firmware_nowait'. This report reveals it: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xec/0x156 lib/dump_stack.c:118 assign_lock_key kernel/locking/lockdep.c:727 [inline] register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753 __lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303 lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline] rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493 rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200 RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840 R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002 R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline] RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline] RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c: 493 Co ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: drm: mxsfb: Fix NULL pointer dereference crash on unload The mxsfb->crtc.funcs may already be NULL when unloading the driver, in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from mxsfb_unload() leads to NULL pointer dereference. Since all we care about is masking the IRQ and mxsfb->base is still valid, just use that to clear and mask the IRQ.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix potential null dereference on pointer status There are calls to idxd_cmd_exec that pass a null status pointer however a recent commit has added an assignment to *status that can end up with a null pointer dereference. The function expects a null status pointer sometimes as there is a later assignment to *status where status is first null checked. Fix the issue by null checking status before making the assignment. Addresses-Coverity: ("Explicit null dereferenced")

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf In commit 41ca9caaae0b ("drm/mediatek: hdmi: Add check for CEA modes only") a check for CEA modes was added to function mtk_hdmi_bridge_mode_valid() in order to address possible issues on MT8167; moreover, with commit c91026a938c2 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock") another similar check was introduced. Unfortunately though, at the time of writing, MT8173 does not provide any mtk_hdmi_conf structure and this is crashing the kernel with NULL pointer upon entering mtk_hdmi_bridge_mode_valid(), which happens as soon as a HDMI cable gets plugged in. To fix this regression, add a NULL pointer check for hdmi->conf in the said function, restoring HDMI functionality and avoiding NULL pointer kernel panics.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Ensure shadow stack is active before "getting" registers The x86 shadow stack support has its own set of registers. Those registers are XSAVE-managed, but they are "supervisor state components" which means that userspace can not touch them with XSAVE/XRSTOR. It also means that they are not accessible from the existing ptrace ABI for XSAVE state. Thus, there is a new ptrace get/set interface for it. The regset code that ptrace uses provides an ->active() handler in addition to the get/set ones. For shadow stack this ->active() handler verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the thread struct. The ->active() handler is checked from some call sites of the regset get/set handlers, but not the ptrace ones. This was not understood when shadow stack support was put in place. As a result, both the set/get handlers can be called with XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an ssp_active() check to avoid surprising the kernel with shadow stack behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That check just happened to avoid the warning. But the ->get() side wasn't so lucky. It can be called with shadow stacks disabled, triggering the warning in practice, as reported by Christina Schimpe: WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0 [...] Call Trace: <TASK> ? show_regs+0x6e/0x80 ? ssp_get+0x89/0xa0 ? __warn+0x91/0x150 ? ssp_get+0x89/0xa0 ? report_bug+0x19d/0x1b0 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x1d/0x80 ? asm_exc_invalid_op+0x1f/0x30 ? __pfx_ssp_get+0x10/0x10 ? ssp_get+0x89/0xa0 ? ssp_get+0x52/0xa0 __regset_get+0xad/0xf0 copy_regset_to_user+0x52/0xc0 ptrace_regset+0x119/0x140 ptrace_request+0x13c/0x850 ? wait_task_inactive+0x142/0x1d0 ? do_syscall_64+0x6d/0x90 arch_ptrace+0x102/0x300 [...] Ensure that shadow stacks are active in a thread before looking them up in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are set at the same time, the active check ensures that there will be something to find in the XSAVE buffer. [ dhansen: changelog/subject tweaks ]

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix NULL dereference in nfs3svc_encode_getaclres In error cases the dentry may be NULL. Before 20798dfe249a, the encoder also checked dentry and d_really_is_positive(dentry), but that looks like overkill to me--zero status should be enough to guarantee a positive dentry. This isn't the first time we've seen an error-case NULL dereference hidden in the initialization of a local variable in an xdr encoder. But I went back through the other recent rewrites and didn't spot any similar bugs.

In the Linux kernel, the following vulnerability has been resolved: usb: musb: tusb6010: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: comedi: ni_usb6501: fix NULL-deref in command paths The driver uses endpoint-sized USB transfer buffers but had no sanity checks on the sizes. This can lead to zero-size-pointer dereferences or overflowed transfer buffers in ni6501_port_command() and ni6501_counter_command() if a (malicious) device has smaller max-packet sizes than expected (or when doing descriptor fuzz testing). Add the missing sanity checks to probe().

In the Linux kernel, the following vulnerability has been resolved: jfs: fix GPF in diFree Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear: struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap; JFS_IP() will return invalid pointer when ipimap == NULL Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670

In the Linux kernel, the following vulnerability has been resolved: selinux: fix NULL-pointer dereference when hashtab allocation fails When the hash table slot array allocation fails in hashtab_init(), h->size is left initialized with a non-zero value, but the h->htable pointer is NULL. This may then cause a NULL pointer dereference, since the policydb code relies on the assumption that even after a failed hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called on it. Yet, these detect an empty hashtab only by looking at the size. Fix this by making sure that hashtab_init() always leaves behind a valid empty hashtab when the allocation fails.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() Commit de144ff4234f changes _pnfs_return_layout() to call pnfs_mark_matching_lsegs_return() passing NULL as the struct pnfs_layout_range argument. Unfortunately, pnfs_mark_matching_lsegs_return() doesn't check if we have a value here before dereferencing it, causing an oops. I'm able to hit this crash consistently when running connectathon basic tests on NFS v4.1/v4.2 against Ontap.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs.

In the Linux kernel, the following vulnerability has been resolved: dm: fix mempool NULL pointer race when completing IO dm_io_dec_pending() calls end_io_acct() first and will then dec md in-flight pending count. But if a task is swapping DM table at same time this can result in a crash due to mempool->elements being NULL: task1 task2 do_resume ->do_suspend ->dm_wait_for_completion bio_endio ->clone_endio ->dm_io_dec_pending ->end_io_acct ->wakeup task1 ->dm_swap_table ->__bind ->__bind_mempools ->bioset_exit ->mempool_exit ->free_io [ 67.330330] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ...... [ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 67.330510] pc : mempool_free+0x70/0xa0 [ 67.330515] lr : mempool_free+0x4c/0xa0 [ 67.330520] sp : ffffff8008013b20 [ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004 [ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8 [ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800 [ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800 [ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80 [ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c [ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd [ 67.330563] x15: 000000000093b41e x14: 0000000000000010 [ 67.330569] x13: 0000000000007f7a x12: 0000000034155555 [ 67.330574] x11: 0000000000000001 x10: 0000000000000001 [ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000 [ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a [ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001 [ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8 [ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970 [ 67.330609] Call trace: [ 67.330616] mempool_free+0x70/0xa0 [ 67.330627] bio_put+0xf8/0x110 [ 67.330638] dec_pending+0x13c/0x230 [ 67.330644] clone_endio+0x90/0x180 [ 67.330649] bio_endio+0x198/0x1b8 [ 67.330655] dec_pending+0x190/0x230 [ 67.330660] clone_endio+0x90/0x180 [ 67.330665] bio_endio+0x198/0x1b8 [ 67.330673] blk_update_request+0x214/0x428 [ 67.330683] scsi_end_request+0x2c/0x300 [ 67.330688] scsi_io_completion+0xa0/0x710 [ 67.330695] scsi_finish_command+0xd8/0x110 [ 67.330700] scsi_softirq_done+0x114/0x148 [ 67.330708] blk_done_softirq+0x74/0xd0 [ 67.330716] __do_softirq+0x18c/0x374 [ 67.330724] irq_exit+0xb4/0xb8 [ 67.330732] __handle_domain_irq+0x84/0xc0 [ 67.330737] gic_handle_irq+0x148/0x1b0 [ 67.330744] el1_irq+0xe8/0x190 [ 67.330753] lpm_cpuidle_enter+0x4f8/0x538 [ 67.330759] cpuidle_enter_state+0x1fc/0x398 [ 67.330764] cpuidle_enter+0x18/0x20 [ 67.330772] do_idle+0x1b4/0x290 [ 67.330778] cpu_startup_entry+0x20/0x28 [ 67.330786] secondary_start_kernel+0x160/0x170 Fix this by: 1) Establishing pointers to 'struct dm_io' members in dm_io_dec_pending() so that they may be passed into end_io_acct() _after_ free_io() is called. 2) Moving end_io_acct() after free_io().

In the Linux kernel, the following vulnerability has been resolved: efi/fdt: fix panic when no valid fdt found setup_arch() would invoke efi_init()->efi_get_fdt_params(). If no valid fdt found then initial_boot_params will be null. So we should stop further fdt processing here. I encountered this issue on risc-v.

In the Linux kernel, the following vulnerability has been resolved: nbd: Fix NULL pointer in flush_workqueue Open /dev/nbdX first, the config_refs will be 1 and the pointers in nbd_device are still null. Disconnect /dev/nbdX, then reference a null recv_workq. The protection by config_refs in nbd_genl_disconnect is useless. [ 656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 656.368943] #PF: supervisor write access in kernel mode [ 656.369844] #PF: error_code(0x0002) - not-present page [ 656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0 [ 656.371693] Oops: 0002 [#1] SMP [ 656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1 [ 656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 656.375904] RIP: 0010:mutex_lock+0x29/0x60 [ 656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d [ 656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246 [ 656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020 [ 656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318 [ 656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40 [ 656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00 [ 656.382166] FS: 00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 [ 656.382806] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0 [ 656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 656.384927] Call Trace: [ 656.385111] flush_workqueue+0x92/0x6c0 [ 656.385395] nbd_disconnect_and_put+0x81/0xd0 [ 656.385716] nbd_genl_disconnect+0x125/0x2a0 [ 656.386034] genl_family_rcv_msg_doit.isra.0+0x102/0x1b0 [ 656.386422] genl_rcv_msg+0xfc/0x2b0 [ 656.386685] ? nbd_ioctl+0x490/0x490 [ 656.386954] ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0 [ 656.387354] netlink_rcv_skb+0x62/0x180 [ 656.387638] genl_rcv+0x34/0x60 [ 656.387874] netlink_unicast+0x26d/0x590 [ 656.388162] netlink_sendmsg+0x398/0x6c0 [ 656.388451] ? netlink_rcv_skb+0x180/0x180 [ 656.388750] ____sys_sendmsg+0x1da/0x320 [ 656.389038] ? ____sys_recvmsg+0x130/0x220 [ 656.389334] ___sys_sendmsg+0x8e/0xf0 [ 656.389605] ? ___sys_recvmsg+0xa2/0xf0 [ 656.389889] ? handle_mm_fault+0x1671/0x21d0 [ 656.390201] __sys_sendmsg+0x6d/0xe0 [ 656.390464] __x64_sys_sendmsg+0x23/0x30 [ 656.390751] do_syscall_64+0x45/0x70 [ 656.391017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put().

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL ptr dereference on VSI filter sync Remove the reason of null pointer dereference in sync VSI filters. Added new I40E_VSI_RELEASING flag to signalize deleting and releasing of VSI resources to sync this thread with sync filters subtask. Without this patch it is possible to start update the VSI filter list after VSI is removed, that's causing a kernel oops.

In the Linux kernel, the following vulnerability has been resolved: net: fujitsu: fix potential null-ptr-deref In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer deref. To fix this, check the return value of ioremap and return -1 to the caller in case of failure.

A NULL pointer dereference vulnerability was found in netlink_dump. This issue can occur when the Netlink socket receives the message(sendmsg) for the XFRM_MSG_GETSA, XFRM_MSG_GETPOLICY type message, and the DUMP flag is set and can cause a denial of service or possibly another unspecified impact. Due to the nature of the flaw, privilege escalation cannot be fully ruled out, although it is unlikely.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix dereference of null pointer flow In the case where chain->flags & NFT_CHAIN_HW_OFFLOAD is false then nft_flow_rule_create is not called and flow is NULL. The subsequent error handling execution via label err_destroy_flow_rule will lead to a null pointer dereference on flow when calling nft_flow_rule_destroy. Since the error path to err_destroy_flow_rule has to cater for null and non-null flows, only call nft_flow_rule_destroy if flow is non-null to fix this issue. Addresses-Coverity: ("Explicity null dereference")

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a NULL-pointer dereference may lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL pointer dereference in i40e_dbg_dump_desc When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors.

In the Linux kernel, the following vulnerability has been resolved: can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe When we converted this code to use dev_err_probe() we accidentally removed a return. It means that if devm_clk_get() it will lead to an Oops when we call clk_get_rate() on the next line.

In the Linux kernel, the following vulnerability has been resolved: seg6: fix the iif in the IPv6 socket control block When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving interface index into the IPv4 socket control block (v5.16-rc4, net/ipv4/ip_input.c line 510): IPCB(skb)->iif = skb->skb_iif; If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH header, the seg6_do_srh_encap(...) performs the required encapsulation. In this case, the seg6_do_srh_encap function clears the IPv6 socket control block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163): memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29). Since the IPv6 socket control block and the IPv4 socket control block share the same memory area (skb->cb), the receiving interface index info is lost (IP6CB(skb)->iif is set to zero). As a side effect, that condition triggers a NULL pointer dereference if commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") is applied. To fix that issue, we set the IP6CB(skb)->iif with the index of the receiving interface once again.

In the Linux kernel, the following vulnerability has been resolved: gve: Add NULL pointer checks when freeing irqs. When freeing notification blocks, we index priv->msix_vectors. If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors) this could lead to a NULL pointer dereference if the driver is unloaded.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: sfc: farch: fix TX queue lookup in TX flush done handling We're starting from a TXQ instance number ('qid'), not a TXQ type, so efx_get_tx_queue() is inappropriate (and could return NULL, leading to panics).

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereference on pointer edp The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check")

In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Fix warning caused by destroying non-initial netns After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces"), if the IPoIB device is moved to non-initial netns, destroying that netns lets the device vanish instead of moving it back to the initial netns, This is happening because default_device_exit() skips the interfaces due to having rtnl_link_ops set. Steps to reporoduce: ip netns add foo ip link set mlx5_ib0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d fuse CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: netns cleanup_net RIP: 0010:netdev_exit+0x3f/0x50 Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48 8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206 RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00 RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00 R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620 R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20 FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ops_exit_list.isra.9+0x36/0x70 cleanup_net+0x234/0x390 process_one_work+0x1cb/0x360 ? process_one_work+0x360/0x360 worker_thread+0x30/0x370 ? process_one_work+0x360/0x360 kthread+0x116/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 To avoid the above warning and later on the kernel panic that could happen on shutdown due to a NULL pointer dereference, make sure to set the netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev: Move device back to init netns on owning netns delete") to properly restore the IPoIB interfaces to the initial netns.

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: fix NULL-deref on disconnect Commit 9d7b18668956 ("HID: magicmouse: add support for Apple Magic Trackpad 2") added a sanity check for an Apple trackpad but returned success instead of -ENODEV when the check failed. This means that the remove callback will dereference the never-initialised driver data pointer when the driver is later unbound (e.g. on USB disconnect).

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst null pointer dereference This patch fixes a tunnel_dst null pointer dereference due to lockless access in the tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking. Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked in the egress path.

In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails Check for a valid hv_vp_index array prior to derefencing hv_vp_index when setting Hyper-V's TSC change callback. If Hyper-V setup failed in hyperv_init(), the kernel will still report that it's running under Hyper-V, but will have silently disabled nearly all functionality. BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc2+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:set_hv_tscchange_cb+0x15/0xa0 Code: <8b> 04 82 8b 15 12 17 85 01 48 c1 e0 20 48 0d ee 00 01 00 f6 c6 08 ... Call Trace: kvm_arch_init+0x17c/0x280 kvm_init+0x31/0x330 vmx_init+0xba/0x13a do_one_initcall+0x41/0x1c0 kernel_init_freeable+0x1f2/0x23b kernel_init+0x16/0x120 ret_from_fork+0x22/0x30

In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: fix null deref in parse dev addr Fix a logic error that could result in a null deref if the user sets the mode incorrectly for the given addr type.

In the Linux kernel, the following vulnerability has been resolved: usb: common: usb-conn-gpio: fix NULL pointer dereference of charger When power on system with OTG cable, IDDIG's interrupt arises before the charger registration, it will cause a NULL pointer dereference, fix the issue by registering the power supply before requesting IDDIG/VBUS irq.

In the Linux kernel, the following vulnerability has been resolved: sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb We should always check if skb_header_pointer's return is NULL before using it, otherwise it may cause null-ptr-deref, as syzbot reported: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline] RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196 Call Trace: <IRQ> sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109 ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422 ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297

In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix potential NULL pointer dereference devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at registration that will cause NULL pointer dereference since corresponding data is not initialized yet. The patch moves initialization of data before devm_add_action_or_reset(). Found by Linux Driver Verification project (linuxtesting.org). [jkosina@suse.cz: rebase]

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null pointer dereference in svc_rqst_free() When alloc_pages_node() returns null in svc_rqst_alloc(), the null rq_scratch_page pointer will be dereferenced when calling put_page() in svc_rqst_free(). Fix it by adding a null check. Addresses-Coverity: ("Dereference after null check")

In the Linux kernel, the following vulnerability has been resolved: ACPI: fix NULL pointer dereference Commit 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer that was possibly NULL. That fails miserably, because that helper inline function is not set up to handle that case. Just make acpi_dev_put() silently accept a NULL pointer, rather than calling down to put_device() with an invalid offset off that NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent NULL deref in cifs_compose_mount_options() The optional @ref parameter might contain an NULL node_name, so prevent dereferencing it in cifs_compose_mount_options(). Addresses-Coverity: 1476408 ("Explicit null dereferenced")

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear. ffs_data_clear is indirectly called from both ffs_fs_kill_sb and ffs_ep0_release, so it ends up being called twice when userland closes ep0 and then unmounts f_fs. If userland provided an eventfd along with function's USB descriptors, it ends up calling eventfd_ctx_put as many times, causing a refcount underflow. NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls. Also, set epfiles to NULL right after de-allocating it, for readability. For completeness, ffs_data_clear actually ends up being called thrice, the last call being before the whole ffs structure gets freed, so when this specific sequence happens there is a second underflow happening (but not being reported): /sys/kernel/debug/tracing# modprobe usb_f_fs /sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter /sys/kernel/debug/tracing# echo function > current_tracer /sys/kernel/debug/tracing# echo 1 > tracing_on (setup gadget, run and kill function userland process, teardown gadget) /sys/kernel/debug/tracing# echo 0 > tracing_on /sys/kernel/debug/tracing# cat trace smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put Warning output corresponding to above trace: [ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c [ 1946.293094] refcount_t: underflow; use-after-free. [ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E) [ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1 [ 1946.417950] Hardware name: BCM2835 [ 1946.425442] Backtrace: [ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24) [ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c [ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30) [ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154) [ 1946.482067] r5:c04a948c r4:c0a71dc8 [ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4) [ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04 [ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c) [ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0 [ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74) [ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs]) [ 1946.582664] r5:c3b84c00 r4:c2695b00 [ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs]) [ 1946.609608] r5:bf54d014 r4:c2695b00 [ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs]) [ 1946.636217] r7:c0dfcb ---truncated---

In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment]

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Immediately reset the MMU context when the SMM flag is cleared Immediately reset the MMU context when the vCPU's SMM flag is cleared so that the SMM flag in the MMU role is always synchronized with the vCPU's flag. If RSM fails (which isn't correctly emulated), KVM will bail without calling post_leave_smm() and leave the MMU in a bad state. The bad MMU role can lead to a NULL pointer dereference when grabbing a shadow page's rmap for a page fault as the initial lookups for the gfn will happen with the vCPU's SMM flag (=0), whereas the rmap lookup will use the shadow page's SMM flag, which comes from the MMU (=1). SMM has an entirely different set of memslots, and so the initial lookup can find a memslot (SMM=0) and then explode on the rmap memslot lookup (SMM=1). general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 8410 Comm: syz-executor382 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__gfn_to_rmap arch/x86/kvm/mmu/mmu.c:935 [inline] RIP: 0010:gfn_to_rmap+0x2b0/0x4d0 arch/x86/kvm/mmu/mmu.c:947 Code: <42> 80 3c 20 00 74 08 4c 89 ff e8 f1 79 a9 00 4c 89 fb 4d 8b 37 44 RSP: 0018:ffffc90000ffef98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888015b9f414 RCX: ffff888019669c40 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffff811d9cdb R09: ffffed10065a6002 R10: ffffed10065a6002 R11: 0000000000000000 R12: dffffc0000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000 FS: 000000000124b300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000028e31000 CR4: 00000000001526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rmap_add arch/x86/kvm/mmu/mmu.c:965 [inline] mmu_set_spte+0x862/0xe60 arch/x86/kvm/mmu/mmu.c:2604 __direct_map arch/x86/kvm/mmu/mmu.c:2862 [inline] direct_page_fault+0x1f74/0x2b70 arch/x86/kvm/mmu/mmu.c:3769 kvm_mmu_do_page_fault arch/x86/kvm/mmu.h:124 [inline] kvm_mmu_page_fault+0x199/0x1440 arch/x86/kvm/mmu/mmu.c:5065 vmx_handle_exit+0x26/0x160 arch/x86/kvm/vmx/vmx.c:6122 vcpu_enter_guest+0x3bdd/0x9630 arch/x86/kvm/x86.c:9428 vcpu_run+0x416/0xc20 arch/x86/kvm/x86.c:9494 kvm_arch_vcpu_ioctl_run+0x4e8/0xa40 arch/x86/kvm/x86.c:9722 kvm_vcpu_ioctl+0x70f/0xbb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3460 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:1069 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:1055 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x440ce9

In the Linux kernel, the following vulnerability has been resolved: memory: renesas-rpc-if: fix possible NULL pointer dereference of resource The platform_get_resource_byname() can return NULL which would be immediately dereferenced by resource_size(). Instead dereference it after validating the resource. Addresses-Coverity: Dereference null return value

In the Linux kernel, the following vulnerability has been resolved: audit: fix possible null-pointer dereference in audit_filter_rules Fix possible null-pointer dereference in audit_filter_rules. audit_filter_rules() error: we previously assumed 'ctx' could be null

In the Linux kernel, the following vulnerability has been resolved: usb: host: ohci-tmio: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: Fix NULL pointer dereference in ->remove() drvdata has to be set in _probe() - otherwise platform_get_drvdata() causes null pointer dereference BUG in _remove().

In the Linux kernel, the following vulnerability has been resolved: regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL devm_gpiod_get_array_optional may return NULL if no GPIO was assigned.