In the Linux kernel, the following vulnerability has been resolved: kyber: fix out of bounds access when preempted __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch.

A flaw was found in the Linux kernel's udmabuf device driver. The specific flaw exists within a fault handler. The issue results from the lack of proper validation of user-supplied data, which can result in a memory access past the end of an array. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the kernel.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix array index out of bound error in DCN32 DML [Why&How] LinkCapacitySupport array is indexed with the number of voltage states and not the number of max DPPs. Fix the error by changing the array declaration to use the correct (larger) array size of total number of voltage states.

In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: don't allow 1 packet limit The current implementation does not work correctly with a limit of 1. iproute2 actually checks for this and this patch adds the check in kernel as well. This fixes the following syzkaller reported crash: UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6 index 65535 is out of range for type 'struct sfq_head[128]' CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x125/0x19f lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:148 [inline] __ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347 sfq_link net/sched/sch_sfq.c:210 [inline] sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238 sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500 sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296 netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline] dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362 __dev_close_many+0x214/0x350 net/core/dev.c:1468 dev_close_many+0x207/0x510 net/core/dev.c:1506 unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738 unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695 unregister_netdevice include/linux/netdevice.h:2893 [inline] __tun_detach+0x6b6/0x1600 drivers/net/tun.c:689 tun_detach drivers/net/tun.c:705 [inline] tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640 __fput+0x203/0x840 fs/file_table.c:280 task_work_run+0x129/0x1b0 kernel/task_work.c:185 exit_task_work include/linux/task_work.h:33 [inline] do_exit+0x5ce/0x2200 kernel/exit.c:931 do_group_exit+0x144/0x310 kernel/exit.c:1046 __do_sys_exit_group kernel/exit.c:1057 [inline] __se_sys_exit_group kernel/exit.c:1055 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055 do_syscall_64+0x6c/0xd0 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7fe5e7b52479 Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f. RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0 R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270 The crash can be also be reproduced with the following (with a tc recompiled to allow for sfq limits of 1): tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s ../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1 ifconfig dummy0 up ping -I dummy0 -f -c2 -W0.1 8.8.8.8 sleep 1 Scenario that triggers the crash: * the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1 * TBF dequeues: it peeks from SFQ which moves the packet to the gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so it schedules itself for later. * the second packet is sent and TBF tries to queues it to SFQ. qdisc qlen is now 2 and because the SFQ limit is 1 the packet is dropped by SFQ. At this point qlen is 1, and all of the SFQ slots are empty, however q->tail is not NULL. At this point, assuming no more packets are queued, when sch_dequeue runs again it will decrement the qlen for the current empty slot causing an underflow and the subsequent out of bounds access.

In the Linux kernel, the following vulnerability has been resolved: jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree When the value of lp is 0 at the beginning of the for loop, it will become negative in the next assignment and we should bail out.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in jfs_readdir The stbl might contain some invalid values. Added a check to return error code in that case.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: fix potential array underflow in ucsi_ccg_sync_control() The "command" variable can be controlled by the user via debugfs. The worry is that if con_index is zero then "&uc->ucsi->connector[con_index - 1]" would be an array underflow.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in DCN30 color transformation This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in degamma hardware format translation Fixes index out of bounds issue in `cm_helper_translate_curve_to_degamma_hw_format` function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore suspended array in md_check_recovery() mddev_suspend() never stop sync_thread, hence it doesn't make sense to ignore suspended array in md_check_recovery(), which might cause sync_thread can't be unregistered. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) suspend the array: raid_postsuspend mddev_suspend 2) stop the array: raid_dtr md_stop __md_stop_writes stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 3) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 4) daemon thread can't unregister sync thread: md_check_recovery if (mddev->suspended) return; -> return directly md_read_sync_thread clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); -> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang; This problem is not just related to dm-raid, fix it by ignoring suspended array in md_check_recovery(). And follow up patches will improve dm-raid better to frozen sync thread during suspend.

In the Linux kernel, the following vulnerability has been resolved: ALSA: asihpi: Fix potential OOB array access ASIHPI driver stores some values in the static array upon a response from the driver, and its index depends on the firmware. We shouldn't trust it blindly. This patch adds a sanity check of the array index to fit in the array size.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix array out-of-bound access in SoC stats Currently, the ath11k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath11k_dp_process_rx() function access ath11k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath11k_dp_process_rx() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in DCN30 degamma hardware format translation This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses The panasonic laptop code in various places uses the SINF array with index values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array is big enough. Not all panasonic laptops have this many SINF array entries, for example the Toughbook CF-18 model only has 10 SINF array entries. So it only supports the AC+DC brightness entries and mute. Check that the SINF array has a minimum size which covers all AC+DC brightness entries and refuse to load if the SINF array is smaller. For higher SINF indexes hide the sysfs attributes when the SINF array does not contain an entry for that attribute, avoiding show()/store() accessing the array out of bounds and add bounds checking to the probe() and resume() code accessing these.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check msg_id before processing transcation [WHY & HOW] HDCP_MESSAGE_ID_INVALID (-1) is not a valid msg_id nor is it a valid array index, and it needs checking before used. This fixes 4 OVERRUN issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check link_index before accessing dc->links[] [WHY & HOW] dc->links[] has max size of MAX_LINKS and NULL is return when trying to access with out-of-bound index. This fixes 3 OVERRUN and 1 RESOURCE_LEAK issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index may exceed array range within fpu_update_bw_bounding_box [Why] Coverity reports OVERRUN warning. soc.num_states could be 40. But array range of bw_params->clk_table.entries is 8. [How] Assert if soc.num_states greater than 8.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed_udc: validate endpoint index for ast udc We should verify the bound of the array to assure that host may not manipulate the index to point past endpoint array. Found by static analysis.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add array index check for hdcp ddc access [Why] Coverity reports OVERRUN warning. Do not check if array index valid. [How] Check msg_id valid and valid array index.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport [Why] Potential out of bounds access in dml2_calculate_rq_and_dlg_params() because the value of out_lowest_state_idx used as an index for FCLKChangeSupport array can be greater than 1. [How] Currently dml2 core specifies identical values for all FCLKChangeSupport elements. Always use index 0 in the condition to avoid out of bounds access.

In the Linux kernel, the following vulnerability has been resolved: mm: vmalloc: ensure vmap_block is initialised before adding to queue Commit 8c61291fd850 ("mm: fix incorrect vbq reference in purge_fragmented_block") extended the 'vmap_block' structure to contain a 'cpu' field which is set at allocation time to the id of the initialising CPU. When a new 'vmap_block' is being instantiated by new_vmap_block(), the partially initialised structure is added to the local 'vmap_block_queue' xarray before the 'cpu' field has been initialised. If another CPU is concurrently walking the xarray (e.g. via vm_unmap_aliases()), then it may perform an out-of-bounds access to the remote queue thanks to an uninitialised index. This has been observed as UBSAN errors in Android: | Internal error: UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP | | Call trace: | purge_fragmented_block+0x204/0x21c | _vm_unmap_aliases+0x170/0x378 | vm_unmap_aliases+0x1c/0x28 | change_memory_common+0x1dc/0x26c | set_memory_ro+0x18/0x24 | module_enable_ro+0x98/0x238 | do_init_module+0x1b0/0x310 Move the initialisation of 'vb->cpu' in new_vmap_block() ahead of the addition to the xarray.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: void array out of bound when loop tnl_num When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes from hardware and the length of array is a fixed value. To void array out of bound, make sure the loop time is not greater than the length of array

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential out-of-bounds access in 'amdgpu_discovery_reg_base_init()' The issue arises when the array 'adev->vcn.vcn_config' is accessed before checking if the index 'adev->vcn.num_vcn_inst' is within the bounds of the array. The fix involves moving the bounds check before the array access. This ensures that 'adev->vcn.num_vcn_inst' is within the bounds of the array before it is used as an index. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1289 amdgpu_discovery_reg_base_init() error: testing array offset 'adev->vcn.num_vcn_inst' after use.

In the Linux kernel, the following vulnerability has been resolved: bnx2x: Fix multiple UBSAN array-index-out-of-bounds Fix UBSAN warnings that occur when using a system with 32 physical cpu cores or more, or when the user defines a number of Ethernet queues greater than or equal to FP_SB_MAX_E1x using the num_queues module parameter. Currently there is a read/write out of bounds that occurs on the array "struct stats_query_entry query" present inside the "bnx2x_fw_stats_req" struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h". Looking at the definition of the "struct stats_query_entry query" array: struct stats_query_entry query[FP_SB_MAX_E1x+ BNX2X_FIRST_QUEUE_QUERY_IDX]; FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3 meaning the array has a total size of 19. Since accesses to "struct stats_query_entry query" are offset-ted by BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet queues should not exceed FP_SB_MAX_E1x (16). However one of these queues is reserved for FCOE and thus the number of Ethernet queues should be set to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if it is not. This is also described in a comment in the source code in drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition of FP_SB_MAX_E1x. Below is the part of this explanation that it important for this patch /* * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is * control by the number of fast-path status blocks supported by the * device (HW/FW). Each fast-path status block (FP-SB) aka non-default * status block represents an independent interrupts context that can * serve a regular L2 networking queue. However special L2 queues such * as the FCoE queue do not require a FP-SB and other components like * the CNIC may consume FP-SB reducing the number of possible L2 queues * * If the maximum number of FP-SB available is X then: * a. If CNIC is supported it consumes 1 FP-SB thus the max number of * regular L2 queues is Y=X-1 * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor) * c. If the FCoE L2 queue is supported the actual number of L2 queues * is Y+1 * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for * slow-path interrupts) or Y+2 if CNIC is supported (one additional * FP interrupt context for the CNIC). * e. The number of HW context (CID count) is always X or X+1 if FCoE * L2 queue is supported. The cid for the FCoE L2 queue is always X. */ However this driver also supports NICs that use the E2 controller which can handle more queues due to having more FP-SB represented by FP_SB_MAX_E2. Looking at the commits when the E2 support was added, it was originally using the E1x parameters: commit f2e0899f0f27 ("bnx2x: Add 57712 support"). Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver was later updated to take full advantage of the E2 instead of having it be limited to the capabilities of the E1x. But as far as we can tell, the array "stats_query_entry query" was still limited to using the FP-SB available to the E1x cards as part of an oversignt when the driver was updated to take full advantage of the E2, and now with the driver being aware of the greater queue size supported by E2 NICs, it causes the UBSAN warnings seen in the stack traces below. This patch increases the size of the "stats_query_entry query" array by replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle both types of NICs. Stack traces: UBSAN: array-index-out-of-bounds in drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11 index 20 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iio: adc: PAC1934: fix accessing out of bounds array index Fix accessing out of bounds array index for average current and voltage measurements. The device itself has only 4 channels, but in sysfs there are "fake" channels for the average voltages and currents too.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds access in 'dcn21_link_encoder_create' An issue was identified in the dcn21_link_encoder_create function where an out-of-bounds access could occur when the hpd_source index was used to reference the link_enc_hpd_regs array. This array has a fixed size and the index was not being checked against the array's bounds before accessing it. This fix adds a conditional check to ensure that the hpd_source index is within the valid range of the link_enc_hpd_regs array. If the index is out of bounds, the function now returns NULL to prevent undefined behavior. References: [ 65.920507] ------------[ cut here ]------------ [ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29 [ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]' [ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 #13 [ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020 [ 65.920527] Call Trace: [ 65.920529] <TASK> [ 65.920532] dump_stack_lvl+0x48/0x70 [ 65.920541] dump_stack+0x10/0x20 [ 65.920543] __ubsan_handle_out_of_bounds+0xa2/0xe0 [ 65.920549] dcn21_link_encoder_create+0xd9/0x140 [amdgpu] [ 65.921009] link_create+0x6d3/0xed0 [amdgpu] [ 65.921355] create_links+0x18a/0x4e0 [amdgpu] [ 65.921679] dc_create+0x360/0x720 [amdgpu] [ 65.921999] ? dmi_matches+0xa0/0x220 [ 65.922004] amdgpu_dm_init+0x2b6/0x2c90 [amdgpu] [ 65.922342] ? console_unlock+0x77/0x120 [ 65.922348] ? dev_printk_emit+0x86/0xb0 [ 65.922354] dm_hw_init+0x15/0x40 [amdgpu] [ 65.922686] amdgpu_device_init+0x26a8/0x33a0 [amdgpu] [ 65.922921] amdgpu_driver_load_kms+0x1b/0xa0 [amdgpu] [ 65.923087] amdgpu_pci_probe+0x1b7/0x630 [amdgpu] [ 65.923087] local_pci_probe+0x4b/0xb0 [ 65.923087] pci_device_probe+0xc8/0x280 [ 65.923087] really_probe+0x187/0x300 [ 65.923087] __driver_probe_device+0x85/0x130 [ 65.923087] driver_probe_device+0x24/0x110 [ 65.923087] __driver_attach+0xac/0x1d0 [ 65.923087] ? __pfx___driver_attach+0x10/0x10 [ 65.923087] bus_for_each_dev+0x7d/0xd0 [ 65.923087] driver_attach+0x1e/0x30 [ 65.923087] bus_add_driver+0xf2/0x200 [ 65.923087] driver_register+0x64/0x130 [ 65.923087] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu] [ 65.923087] __pci_register_driver+0x61/0x70 [ 65.923087] amdgpu_init+0x7d/0xff0 [amdgpu] [ 65.923087] do_one_initcall+0x49/0x310 [ 65.923087] ? kmalloc_trace+0x136/0x360 [ 65.923087] do_init_module+0x6a/0x270 [ 65.923087] load_module+0x1fce/0x23a0 [ 65.923087] init_module_from_file+0x9c/0xe0 [ 65.923087] ? init_module_from_file+0x9c/0xe0 [ 65.923087] idempotent_init_module+0x179/0x230 [ 65.923087] __x64_sys_finit_module+0x5d/0xa0 [ 65.923087] do_syscall_64+0x76/0x120 [ 65.923087] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 65.923087] RIP: 0033:0x7f2d80f1e88d [ 65.923087] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [ 65.923087] RSP: 002b:00007ffc7bc1aa78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 65.923087] RAX: ffffffffffffffda RBX: 0000564c9c1db130 RCX: 00007f2d80f1e88d [ 65.923087] RDX: 0000000000000000 RSI: 0000564c9c1e5480 RDI: 000000000000000f [ 65.923087] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002 [ 65.923087] R10: 000000000000000f R11: 0000000000000246 R12: 0000564c9c1e5480 [ 65.923087] R13: 0000564c9c1db260 R14: 0000000000000000 R15: 0000564c9c1e54b0 [ 65.923087] </TASK> [ 65.923927] ---[ end trace ]---

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/cpufreq_cooling: Fix slab OOB issue Slab OOB issue is scanned by KASAN in cpu_power_to_freq(). If power is limited below the power of OPP0 in EM table, it will cause slab out-of-bound issue with negative array index. Return the lowest frequency if limited power cannot found a suitable OPP in EM table to fix this issue. Backtrace: [<ffffffd02d2a37f0>] die+0x104/0x5ac [<ffffffd02d2a5630>] bug_handler+0x64/0xd0 [<ffffffd02d288ce4>] brk_handler+0x160/0x258 [<ffffffd02d281e5c>] do_debug_exception+0x248/0x3f0 [<ffffffd02d284488>] el1_dbg+0x14/0xbc [<ffffffd02d75d1d4>] __kasan_report+0x1dc/0x1e0 [<ffffffd02d75c2e0>] kasan_report+0x10/0x20 [<ffffffd02d75def8>] __asan_report_load8_noabort+0x18/0x28 [<ffffffd02e6fce5c>] cpufreq_power2state+0x180/0x43c [<ffffffd02e6ead80>] power_actor_set_power+0x114/0x1d4 [<ffffffd02e6fac24>] allocate_power+0xaec/0xde0 [<ffffffd02e6f9f80>] power_allocator_throttle+0x3ec/0x5a4 [<ffffffd02e6ea888>] handle_thermal_trip+0x160/0x294 [<ffffffd02e6edd08>] thermal_zone_device_check+0xe4/0x154 [<ffffffd02d351cb4>] process_one_work+0x5e4/0xe28 [<ffffffd02d352f44>] worker_thread+0xa4c/0xfac [<ffffffd02d360124>] kthread+0x33c/0x358 [<ffffffd02d289940>] ret_from_fork+0xc/0x18

In the Linux kernel, the following vulnerability has been resolved: UBSAN: array-index-out-of-bounds in dtSplitRoot Syzkaller reported the following issue: oop0: detected capacity change from 0 to 32768 UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9 index -2 is out of range for type 'struct dtslot [128]' CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283 dtSplitRoot+0x8d8/0x1900 fs/jfs/jfs_dtree.c:1971 dtSplitUp fs/jfs/jfs_dtree.c:985 [inline] dtInsert+0x1189/0x6b80 fs/jfs/jfs_dtree.c:863 jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270 vfs_mkdir+0x3b3/0x590 fs/namei.c:4013 do_mkdirat+0x279/0x550 fs/namei.c:4038 __do_sys_mkdirat fs/namei.c:4053 [inline] __se_sys_mkdirat fs/namei.c:4051 [inline] __x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fcdc0113fd9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000102 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003 RBP: 00007fcdc00d37a0 R08: 0000000000000000 R09: 00007fcdc00d37a0 R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000 R13: 0000000000000000 R14: 00083878000000f8 R15: 0000000000000000 </TASK> The issue is caused when the value of fsi becomes less than -1. The check to break the loop when fsi value becomes -1 is present but syzbot was able to produce value less than -1 which cause the error. This patch simply add the change for the values less than 0. The patch is tested via syzbot.

In the Linux kernel, the following vulnerability has been resolved: rtw89: cfo: check mac_id to avoid out-of-bounds Somehow, hardware reports incorrect mac_id and pollute memory. Check index before we access the array. UBSAN: array-index-out-of-bounds in rtw89/phy.c:2517:23 index 188 is out of range for type 's32 [64]' CPU: 1 PID: 51550 Comm: irq/35-rtw89_pc Tainted: G OE Call Trace: <IRQ> show_stack+0x52/0x58 dump_stack_lvl+0x4c/0x63 dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_out_of_bounds.cold+0x44/0x49 ? __alloc_skb+0x92/0x1d0 rtw89_phy_cfo_parse+0x44/0x7f [rtw89_core] rtw89_core_rx+0x261/0x871 [rtw89_core] ? __alloc_skb+0xee/0x1d0 rtw89_pci_napi_poll+0x3fa/0x4ea [rtw89_pci] __napi_poll+0x33/0x1a0 net_rx_action+0x126/0x260 ? __queue_work+0x217/0x4c0 __do_softirq+0xd9/0x315 ? disable_irq_nosync+0x10/0x10 do_softirq.part.0+0x6d/0x90 </IRQ> <TASK> __local_bh_enable_ip+0x62/0x70 rtw89_pci_interrupt_threadfn+0x182/0x1a6 [rtw89_pci] irq_thread_fn+0x28/0x60 irq_thread+0xc8/0x190 ? irq_thread_fn+0x60/0x60 kthread+0x16b/0x190 ? irq_thread_check_affinity+0xe0/0xe0 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc() The voice allocator sometimes begins allocating from near the end of the array and then wraps around, however snd_emu10k1_pcm_channel_alloc() accesses the newly allocated voices as if it never wrapped around. This results in out of bounds access if the first voice has a high enough index so that first_voice + requested_voice_count > NUM_G (64). The more voices are requested, the more likely it is for this to occur. This was initially discovered using PipeWire, however it can be reproduced by calling aplay multiple times with 16 channels: aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40 index 65 is out of range for type 'snd_emu10k1_voice [64]' CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7 Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x3f __ubsan_handle_out_of_bounds.cold+0x44/0x49 snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1] snd_pcm_hw_params+0x29f/0x600 [snd_pcm] snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm] ? exit_to_user_mode_prepare+0x35/0x170 ? do_syscall_64+0x69/0x90 ? syscall_exit_to_user_mode+0x26/0x50 ? do_syscall_64+0x69/0x90 ? exit_to_user_mode_prepare+0x35/0x170 snd_pcm_ioctl+0x27/0x40 [snd_pcm] __x64_sys_ioctl+0x95/0xd0 do_syscall_64+0x5c/0x90 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

CWE-129: Improper Validation of Array Index vulnerability exists that could cause local denial-of-service when a malicious actor with local user access crafts a script/program using an IOCTL call in the Foxboro.sys driver.

NVIDIA Display Driver for Windows and Linux contains a vulnerability where an attacker might cause an improper index validation by issuing a call with crafted parameters. A successful exploit of this vulnerability might lead to data tampering  or denial of service.