In the Linux kernel, the following vulnerability has been resolved: erofs: fix buffer copy overflow of ztailpacking feature I got some KASAN report as below: [ 46.959738] ================================================================== [ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188 ... [ 46.960430] Call Trace: [ 46.960430] <TASK> [ 46.960430] dump_stack_lvl+0x41/0x5e [ 46.960430] print_report.cold+0xb2/0x6b7 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_report+0x8a/0x140 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_check_range+0x14d/0x1d0 [ 46.960430] memcpy+0x20/0x60 [ 46.960430] z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080 The root cause is that the tail pcluster won't be a complete filesystem block anymore. So if ztailpacking is used, the second part of an uncompressed tail pcluster may not be ``rq->pageofs_out``.

In the Linux kernel, the following vulnerability has been resolved: usbnet: Run unregister_netdev() before unbind() again Commit 2c9d6c2b871d ("usbnet: run unbind() before unregister_netdev()") sought to fix a use-after-free on disconnect of USB Ethernet adapters. It turns out that a different fix is necessary to address the issue: https://lore.kernel.org/netdev/18b3541e5372bc9b9fc733d422f4e698c089077c.1650177997.git.lukas@wunner.de/ So the commit was not necessary. The commit made binding and unbinding of USB Ethernet asymmetrical: Before, usbnet_probe() first invoked the ->bind() callback and then register_netdev(). usbnet_disconnect() mirrored that by first invoking unregister_netdev() and then ->unbind(). Since the commit, the order in usbnet_disconnect() is reversed and no longer mirrors usbnet_probe(). One consequence is that a PHY disconnected (and stopped) in ->unbind() is afterwards stopped once more by unregister_netdev() as it closes the netdev before unregistering. That necessitates a contortion in ->stop() because the PHY may only be stopped if it hasn't already been disconnected. Reverting the commit allows making the call to phy_stop() unconditional in ->stop().

In the Linux kernel, the following vulnerability has been resolved: dm: fix use-after-free in dm_cleanup_zoned_dev() dm_cleanup_zoned_dev() uses queue, so it must be called before blk_cleanup_disk() starts its killing: blk_cleanup_disk->blk_cleanup_queue()->kobject_put()->blk_release_queue()-> ->...RCU...->blk_free_queue_rcu()->kmem_cache_free() Otherwise, RCU callback may be executed first and dm_cleanup_zoned_dev() will touch free'd memory: BUG: KASAN: use-after-free in dm_cleanup_zoned_dev+0x33/0xd0 Read of size 8 at addr ffff88805ac6e430 by task dmsetup/681 CPU: 4 PID: 681 Comm: dmsetup Not tainted 5.17.0-rc2+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1f/0x150 ? dm_cleanup_zoned_dev+0x33/0xd0 kasan_report.cold+0x7f/0x11b ? dm_cleanup_zoned_dev+0x33/0xd0 dm_cleanup_zoned_dev+0x33/0xd0 __dm_destroy+0x26a/0x400 ? dm_blk_ioctl+0x230/0x230 ? up_write+0xd8/0x270 dev_remove+0x156/0x1d0 ctl_ioctl+0x269/0x530 ? table_clear+0x140/0x140 ? lock_release+0xb2/0x750 ? remove_all+0x40/0x40 ? rcu_read_lock_sched_held+0x12/0x70 ? lock_downgrade+0x3c0/0x3c0 ? rcu_read_lock_sched_held+0x12/0x70 dm_ctl_ioctl+0xa/0x10 __x64_sys_ioctl+0xb9/0xf0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fb6dfa95c27

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent prealloc proc writes We have no protection against concurrent PCM buffer preallocation changes via proc files, and it may potentially lead to UAF or some weird problem. This patch applies the PCM open_mutex to the proc write operation for avoiding the racy proc writes and the PCM stream open (and further operations).

In the Linux kernel, the following vulnerability has been resolved: bfq: Make sure bfqg for which we are queueing requests is online Bios queued into BFQ IO scheduler can be associated with a cgroup that was already offlined. This may then cause insertion of this bfq_group into a service tree. But this bfq_group will get freed as soon as last bio associated with it is completed leading to use after free issues for service tree users. Fix the problem by making sure we always operate on online bfq_group. If the bfq_group associated with the bio is not online, we pick the first online parent.

In the Linux kernel, the following vulnerability has been resolved: drivers:md:fix a potential use-after-free bug In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and may cause sh to be released. However, sh is subsequently used in lines 2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an use-after-free bug. It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of the function.

In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_create_volume: Fix use-after-free when volume creation failed There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path: ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link].

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent hw_params and hw_free calls Currently we have neither proper check nor protection against the concurrent calls of PCM hw_params and hw_free ioctls, which may result in a UAF. Since the existing PCM stream lock can't be used for protecting the whole ioctl operations, we need a new mutex to protect those racy calls. This patch introduced a new mutex, runtime->buffer_mutex, and applies it to both hw_params and hw_free ioctl code paths. Along with it, the both functions are slightly modified (the mmap_count check is moved into the state-check block) for code simplicity.

In the Linux kernel, the following vulnerability has been resolved: tty: goldfish: Fix free_irq() on remove Pass the correct dev_id to free_irq() to fix this splat when the driver is unbound: WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq Trying to free already-free IRQ 65 Call Trace: warn_slowpath_fmt free_irq goldfish_tty_remove platform_remove device_remove device_release_driver_internal device_driver_detach unbind_store drv_attr_store ...

In the Linux kernel, the following vulnerability has been resolved: ntfs: fix use-after-free in ntfs_attr_find() Patch series "ntfs: fix bugs about Attribute", v2. This patchset fixes three bugs relative to Attribute in record: Patch 1 adds a sanity check to ensure that, attrs_offset field in first mft record loading from disk is within bounds. Patch 2 moves the ATTR_RECORD's bounds checking earlier, to avoid dereferencing ATTR_RECORD before checking this ATTR_RECORD is within bounds. Patch 3 adds an overflow checking to avoid possible forever loop in ntfs_attr_find(). Without patch 1 and patch 2, the kernel triggersa KASAN use-after-free detection as reported by Syzkaller. Although one of patch 1 or patch 2 can fix this, we still need both of them. Because patch 1 fixes the root cause, and patch 2 not only fixes the direct cause, but also fixes the potential out-of-bounds bug. This patch (of 3): Syzkaller reported use-after-free read as follows: ================================================================== BUG: KASAN: use-after-free in ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597 Read of size 2 at addr ffff88807e352009 by task syz-executor153/3607 [...] Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x719 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597 ntfs_attr_lookup+0x1056/0x2070 fs/ntfs/attrib.c:1193 ntfs_read_inode_mount+0x89a/0x2580 fs/ntfs/inode.c:1845 ntfs_fill_super+0x1799/0x9320 fs/ntfs/super.c:2854 mount_bdev+0x34d/0x410 fs/super.c:1400 legacy_get_tree+0x105/0x220 fs/fs_context.c:610 vfs_get_tree+0x89/0x2f0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x1326/0x1e20 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] </TASK> The buggy address belongs to the physical page: page:ffffea0001f8d400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7e350 head:ffffea0001f8d400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 0000000000000000 dead000000000122 ffff888011842140 raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88807e351f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88807e351f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88807e352000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807e352080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807e352100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Kernel will loads $MFT/$DATA's first mft record in ntfs_read_inode_mount(). Yet the problem is that after loading, kernel doesn't check whether attrs_offset field is a valid value. To be more specific, if attrs_offset field is larger than bytes_allocated field, then it may trigger the out-of-bounds read bug(reported as use-after-free bug) in ntfs_attr_find(), when kernel tries to access the corresponding mft record's attribute. This patch solves it by adding the sanity check between attrs_offset field and bytes_allocated field, after loading the first mft record.

In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix use-after-free during unregister In the following code within firmware_upload_unregister(), the call to device_unregister() could result in the dev_release function freeing the fw_upload_priv structure before it is dereferenced for the call to module_put(). This bug was found by the kernel test robot using CONFIG_KASAN while running the firmware selftests. device_unregister(&fw_sysfs->dev); module_put(fw_upload_priv->module); The problem is fixed by copying fw_upload_priv->module to a local variable for use when calling device_unregister().

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait While performing fast composition switch, there is a possibility that the process of ffs_ep0_write/ffs_ep0_read get into a race condition due to ep0req being freed up from functionfs_unbind. Consider the scenario that the ffs_ep0_write calls the ffs_ep0_queue_wait by taking a lock &ffs->ev.waitq.lock. However, the functionfs_unbind isn't bounded so it can go ahead and mark the ep0req to NULL, and since there is no NULL check in ffs_ep0_queue_wait we will end up in use-after-free. Fix this by making a serialized execution between the two functions using a mutex_lock(ffs->mutex).

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix use-after-free in chanctx code In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point. However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx.

In the Linux kernel, the following vulnerability has been resolved: ceph: avoid putting the realm twice when decoding snaps fails When decoding the snaps fails it maybe leaving the 'first_realm' and 'realm' pointing to the same snaprealm memory. And then it'll put it twice and could cause random use-after-free, BUG_ON, etc issues.

In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove() In fsl_mc_bus_remove(), mc->root_mc_bus_dev->mc_io is passed to fsl_destroy_mc_io(). However, mc->root_mc_bus_dev is already freed in fsl_mc_device_remove(). Then reference to mc->root_mc_bus_dev->mc_io triggers KASAN use-after-free. To avoid the use-after-free, keep the reference to mc->root_mc_bus_dev->mc_io in a local variable and pass to fsl_destroy_mc_io(). This patch needs rework to apply to kernels older than v5.15.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_tx_handler(): fix use after free of skb can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch.

In the Linux kernel, the following vulnerability has been resolved: srcu: Tighten cleanup_srcu_struct() GP checks Currently, cleanup_srcu_struct() checks for a grace period in progress, but it does not check for a grace period that has not yet started but which might start at any time. Such a situation could result in a use-after-free bug, so this commit adds a check for a grace period that is needed but not yet started to cleanup_srcu_struct().

In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Cleanup CPU timers before freeing them during exec Commit 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a task") started looking up tasks by PID when deleting a CPU timer. When a non-leader thread calls execve, it will switch PIDs with the leader process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find the task because the timer still points out to the old PID. That means that armed timers won't be disarmed, that is, they won't be removed from the timerqueue_list. exit_itimers will still release their memory, and when that list is later processed, it leads to a use-after-free. Clean up the timers from the de-threaded task before freeing them. This prevents a reported use-after-free.

The mm_init function in kernel/fork.c in the Linux kernel before 4.12.10 does not clear the ->exe_file member of a new process's mm_struct, allowing a local attacker to achieve a use-after-free or possibly have unspecified other impact by running a specially crafted program.

In the Linux kernel, the following vulnerability has been resolved: block: disable the elevator int del_gendisk The elevator is only used for file system requests, which are stopped in del_gendisk. Move disabling the elevator and freeing the scheduler tags to the end of del_gendisk instead of doing that work in disk_release and blk_cleanup_queue to avoid a use after free on q->tag_set from disk_release as the tag_set might not be alive at that point. Move the blk_qos_exit call as well, as it just depends on the elevator exit and would be the only reason to keep the not exactly cheap queue freeze in disk_release.

In the Linux kernel, the following vulnerability has been resolved: mt76: fix tx status related use-after-free race on station removal There is a small race window where ongoing tx activity can lead to a skb getting added to the status tracking idr after that idr has already been cleaned up, which will keep the wcid linked in the status poll list. Fix this by only adding status skbs if the wcid pointer is still assigned in dev->wcid, which gets cleared early by mt76_sta_pre_rcu_remove

In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free after 802.3ad slave unbind commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470

In the Linux kernel, the following vulnerability has been resolved: drm/panfrost: Job should reference MMU not file_priv For a while now it's been allowed for a MMU context to outlive it's corresponding panfrost_priv, however the job structure still references panfrost_priv to get hold of the MMU context. If panfrost_priv has been freed this is a use-after-free which I've been able to trigger resulting in a splat. To fix this, drop the reference to panfrost_priv in the job structure and add a direct reference to the MMU structure which is what's actually needed.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix use-after-free Read in tipc_named_reinit syzbot found the following issue on: ================================================================== BUG: KASAN: use-after-free in tipc_named_reinit+0x94f/0x9b0 net/tipc/name_distr.c:413 Read of size 8 at addr ffff88805299a000 by task kworker/1:9/23764 CPU: 1 PID: 23764 Comm: kworker/1:9 Not tainted 5.18.0-rc4-syzkaller-00878-g17d49e6e8012 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events tipc_net_finalize_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x495 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 tipc_named_reinit+0x94f/0x9b0 net/tipc/name_distr.c:413 tipc_net_finalize+0x234/0x3d0 net/tipc/net.c:138 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 </TASK> [...] ================================================================== In the commit d966ddcc3821 ("tipc: fix a deadlock when flushing scheduled work"), the cancel_work_sync() function just to make sure ONLY the work tipc_net_finalize_work() is executing/pending on any CPU completed before tipc namespace is destroyed through tipc_exit_net(). But this function is not guaranteed the work is the last queued. So, the destroyed instance may be accessed in the work which will try to enqueue later. In order to completely fix, we re-order the calling of cancel_work_sync() to make sure the work tipc_net_finalize_work() was last queued and it must be completed by calling cancel_work_sync().

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-sva: Fix mm use-after-free We currently call arm64_mm_context_put() without holding a reference to the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to ensure the mm only gets freed after we unpinned the ASID.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccree - Fix use after free in cc_cipher_exit() kfree_sensitive(ctx_p->user.key) will free the ctx_p->user.key. But ctx_p->user.key is still used in the next line, which will lead to a use after free. We can call kfree_sensitive() after dev_dbg() to avoid the uaf.

In the Linux kernel, the following vulnerability has been resolved: KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive. Not checking the active flag during refresh is particularly egregious, as KVM can end up with a valid, inactive cache, which can lead to a variety of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing an mmu_notifier invalidation due to the cache not being on the list of gfns to invalidate. Note, "active" needs to be set if and only if the cache is on the list of caches, i.e. is reachable via mmu_notifier events. If a relevant mmu_notifier event occurs while the cache is "active" but not on the list, KVM will not acquire the cache's lock and so will not serailize the mmu_notifier event with active users and/or kvm_gpc_refresh(). A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND can be exploited to trigger the bug. 1. Deactivate shinfo cache: kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO kvm_gpc_deactivate kvm_gpc_unmap gpc->valid = false gpc->khva = NULL gpc->active = false Result: active = false, valid = false 2. Cause cache refresh: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast kvm_gpc_check return -EWOULDBLOCK because !gpc->valid kvm_xen_set_evtchn_fast return -EWOULDBLOCK kvm_gpc_refresh hva_to_pfn_retry gpc->valid = true gpc->khva = not NULL Result: active = false, valid = true 3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl KVM_XEN_ATTR_TYPE_SHARED_INFO: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast read_lock gpc->lock kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO mutex_lock kvm->lock kvm_xen_shared_info_init kvm_gpc_activate gpc->khva = NULL kvm_gpc_check [ Check passes because gpc->valid is still true, even though gpc->khva is already NULL. ] shinfo = gpc->khva pending_bits = shinfo->evtchn_pending CRASH: test_and_set_bit(..., pending_bits)

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix a window for use-after-free During a destroy CQ an interrupt may cause processing of a CQE after CQ resources are freed by irdma_cq_free_rsrc(). Fix this by moving the call to irdma_cq_free_rsrc() after the irdma_sc_cleanup_ceqes(), which is called under the cq_lock.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix use after free bugs _Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl() functions don't do anything except free the "pcmd" pointer. It results in a use after free. Delete them.

In the Linux kernel, the following vulnerability has been resolved: ASoC: rt5645: Fix errorenous cleanup order There is a logic error when removing rt5645 device as the function rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and delete the &rt5645->btn_check_timer latter. However, since the timer handler rt5645_btn_check_callback() will re-queue the jack_detect_work, this cleanup order is buggy. That is, once the del_timer_sync in rt5645_i2c_remove is concurrently run with the rt5645_btn_check_callback, the canceled jack_detect_work will be rescheduled again, leading to possible use-after-free. This patch fix the issue by placing the del_timer_sync function before the cancel_delayed_work_sync.

In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Avoid use-after-free on suspend/resume hctx->user_data is set to vq in virtblk_init_hctx(). However, vq is freed on suspend and reallocated on resume. So, hctx->user_data is invalid after resume, and it will cause use-after-free accessing which will result in the kernel crash something like below: [ 22.428391] Call Trace: [ 22.428899] <TASK> [ 22.429339] virtqueue_add_split+0x3eb/0x620 [ 22.430035] ? __blk_mq_alloc_requests+0x17f/0x2d0 [ 22.430789] ? kvm_clock_get_cycles+0x14/0x30 [ 22.431496] virtqueue_add_sgs+0xad/0xd0 [ 22.432108] virtblk_add_req+0xe8/0x150 [ 22.432692] virtio_queue_rqs+0xeb/0x210 [ 22.433330] blk_mq_flush_plug_list+0x1b8/0x280 [ 22.434059] __blk_flush_plug+0xe1/0x140 [ 22.434853] blk_finish_plug+0x20/0x40 [ 22.435512] read_pages+0x20a/0x2e0 [ 22.436063] ? folio_add_lru+0x62/0xa0 [ 22.436652] page_cache_ra_unbounded+0x112/0x160 [ 22.437365] filemap_get_pages+0xe1/0x5b0 [ 22.437964] ? context_to_sid+0x70/0x100 [ 22.438580] ? sidtab_context_to_sid+0x32/0x400 [ 22.439979] filemap_read+0xcd/0x3d0 [ 22.440917] xfs_file_buffered_read+0x4a/0xc0 [ 22.441984] xfs_file_read_iter+0x65/0xd0 [ 22.442970] __kernel_read+0x160/0x2e0 [ 22.443921] bprm_execve+0x21b/0x640 [ 22.444809] do_execveat_common.isra.0+0x1a8/0x220 [ 22.446008] __x64_sys_execve+0x2d/0x40 [ 22.446920] do_syscall_64+0x37/0x90 [ 22.447773] entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes this issue by getting vq from vblk, and removes virtblk_init_hctx().

In the Linux kernel, the following vulnerability has been resolved: driver: base: fix UAF when driver_attach failed When driver_attach(drv); failed, the driver_private will be freed. But it has been added to the bus, which caused a UAF. To fix it, we need to delete it from the bus when failed.

In the Linux kernel, the following vulnerability has been resolved: blk-throttle: Set BIO_THROTTLED when bio has been throttled 1.In current process, all bio will set the BIO_THROTTLED flag after __blk_throtl_bio(). 2.If bio needs to be throttled, it will start the timer and stop submit bio directly. Bio will submit in blk_throtl_dispatch_work_fn() when the timer expires.But in the current process, if bio is throttled. The BIO_THROTTLED will be set to bio after timer start. If the bio has been completed, it may cause use-after-free blow. BUG: KASAN: use-after-free in blk_throtl_bio+0x12f0/0x2c70 Read of size 2 at addr ffff88801b8902d4 by task fio/26380 dump_stack+0x9b/0xce print_address_description.constprop.6+0x3e/0x60 kasan_report.cold.9+0x22/0x3a blk_throtl_bio+0x12f0/0x2c70 submit_bio_checks+0x701/0x1550 submit_bio_noacct+0x83/0xc80 submit_bio+0xa7/0x330 mpage_readahead+0x380/0x500 read_pages+0x1c1/0xbf0 page_cache_ra_unbounded+0x471/0x6f0 do_page_cache_ra+0xda/0x110 ondemand_readahead+0x442/0xae0 page_cache_async_ra+0x210/0x300 generic_file_buffered_read+0x4d9/0x2130 generic_file_read_iter+0x315/0x490 blkdev_read_iter+0x113/0x1b0 aio_read+0x2ad/0x450 io_submit_one+0xc8e/0x1d60 __se_sys_io_submit+0x125/0x350 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 26380: kasan_save_stack+0x19/0x40 __kasan_kmalloc.constprop.2+0xc1/0xd0 kmem_cache_alloc+0x146/0x440 mempool_alloc+0x125/0x2f0 bio_alloc_bioset+0x353/0x590 mpage_alloc+0x3b/0x240 do_mpage_readpage+0xddf/0x1ef0 mpage_readahead+0x264/0x500 read_pages+0x1c1/0xbf0 page_cache_ra_unbounded+0x471/0x6f0 do_page_cache_ra+0xda/0x110 ondemand_readahead+0x442/0xae0 page_cache_async_ra+0x210/0x300 generic_file_buffered_read+0x4d9/0x2130 generic_file_read_iter+0x315/0x490 blkdev_read_iter+0x113/0x1b0 aio_read+0x2ad/0x450 io_submit_one+0xc8e/0x1d60 __se_sys_io_submit+0x125/0x350 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 0: kasan_save_stack+0x19/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x1b/0x30 __kasan_slab_free+0x111/0x160 kmem_cache_free+0x94/0x460 mempool_free+0xd6/0x320 bio_free+0xe0/0x130 bio_put+0xab/0xe0 bio_endio+0x3a6/0x5d0 blk_update_request+0x590/0x1370 scsi_end_request+0x7d/0x400 scsi_io_completion+0x1aa/0xe50 scsi_softirq_done+0x11b/0x240 blk_mq_complete_request+0xd4/0x120 scsi_mq_done+0xf0/0x200 virtscsi_vq_done+0xbc/0x150 vring_interrupt+0x179/0x390 __handle_irq_event_percpu+0xf7/0x490 handle_irq_event_percpu+0x7b/0x160 handle_irq_event+0xcc/0x170 handle_edge_irq+0x215/0xb20 common_interrupt+0x60/0x120 asm_common_interrupt+0x1e/0x40 Fix this by move BIO_THROTTLED set into the queue_lock.

In the Linux kernel, the following vulnerability has been resolved: btrfs: always report error in run_one_delayed_ref() Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but if end users hit such problem, there will be no chance that btrfs_debug() is enabled. This can lead to very little useful info for debugging. This patch will: - Add extra info for error reporting Including: * logical bytenr * num_bytes * type * action * ref_mod - Replace the btrfs_debug() with btrfs_err() - Move the error reporting into run_one_delayed_ref() This is to avoid use-after-free, the @node can be freed in the caller. This error should only be triggered at most once. As if run_one_delayed_ref() failed, we trigger the error message, then causing the call chain to error out: btrfs_run_delayed_refs() `- btrfs_run_delayed_refs() `- btrfs_run_delayed_refs_for_head() `- run_one_delayed_ref() And we will abort the current transaction in btrfs_run_delayed_refs(). If we have to run delayed refs for the abort transaction, run_one_delayed_ref() will just cleanup the refs and do nothing, thus no new error messages would be output.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF due to race between btf_try_get_module and load_module While working on code to populate kfunc BTF ID sets for module BTF from its initcall, I noticed that by the time the initcall is invoked, the module BTF can already be seen by userspace (and the BPF verifier). The existing btf_try_get_module calls try_module_get which only fails if mod->state == MODULE_STATE_GOING, i.e. it can increment module reference when module initcall is happening in parallel. Currently, BTF parsing happens from MODULE_STATE_COMING notifier callback. At this point, the module initcalls have not been invoked. The notifier callback parses and prepares the module BTF, allocates an ID, which publishes it to userspace, and then adds it to the btf_modules list allowing the kernel to invoke btf_try_get_module for the BTF. However, at this point, the module has not been fully initialized (i.e. its initcalls have not finished). The code in module.c can still fail and free the module, without caring for other users. However, nothing stops btf_try_get_module from succeeding between the state transition from MODULE_STATE_COMING to MODULE_STATE_LIVE. This leads to a use-after-free issue when BPF program loads successfully in the state transition, load_module's do_init_module call fails and frees the module, and BPF program fd on close calls module_put for the freed module. Future patch has test case to verify we don't regress in this area in future. There are multiple points after prepare_coming_module (in load_module) where failure can occur and module loading can return error. We illustrate and test for the race using the last point where it can practically occur (in module __init function). An illustration of the race: CPU 0 CPU 1 load_module notifier_call(MODULE_STATE_COMING) btf_parse_module btf_alloc_id // Published to userspace list_add(&btf_mod->list, btf_modules) mod->init(...) ... ^ bpf_check | check_pseudo_btf_id | btf_try_get_module | returns true | ... ... | module __init in progress return prog_fd | ... ... V if (ret < 0) free_module(mod) ... close(prog_fd) ... bpf_prog_free_deferred module_put(used_btf.mod) // use-after-free We fix this issue by setting a flag BTF_MODULE_F_LIVE, from the notifier callback when MODULE_STATE_LIVE state is reached for the module, so that we return NULL from btf_try_get_module for modules that are not fully formed. Since try_module_get already checks that module is not in MODULE_STATE_GOING state, and that is the only transition a live module can make before being removed from btf_modules list, this is enough to close the race and prevent the bug. A later selftest patch crafts the race condition artifically to verify that it has been fixed, and that verifier fails to load program (with ENXIO). Lastly, a couple of comments: 1. Even if this race didn't exist, it seems more appropriate to only access resources (ksyms and kfuncs) of a fully formed module which has been initialized completely. 2. This patch was born out of need for synchronization against module initcall for the next patch, so it is needed for correctness even without the aforementioned race condition. The BTF resources initialized by module initcall are set up once and then only looked up, so just waiting until the initcall has finished ensures correct behavior.

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix use-after-free in snd_soc_exit() KASAN reports a use-after-free: BUG: KASAN: use-after-free in device_del+0xb5b/0xc60 Read of size 8 at addr ffff888008655050 by task rmmod/387 CPU: 2 PID: 387 Comm: rmmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl+0x79/0x9a print_report+0x17f/0x47b kasan_report+0xbb/0xf0 device_del+0xb5b/0xc60 platform_device_del.part.0+0x24/0x200 platform_device_unregister+0x2e/0x40 snd_soc_exit+0xa/0x22 [snd_soc_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> It's bacause in snd_soc_init(), snd_soc_util_init() is possble to fail, but its ret is ignored, which makes soc_dummy_dev unregistered twice. snd_soc_init() snd_soc_util_init() platform_device_register_simple(soc_dummy_dev) platform_driver_register() # fail platform_device_unregister(soc_dummy_dev) platform_driver_register() # success ... snd_soc_exit() snd_soc_util_exit() # soc_dummy_dev will be unregistered for second time To fix it, handle error and stop snd_soc_init() when util_init() fail. Also clean debugfs when util_init() or driver_register() fail.

In the Linux kernel, the following vulnerability has been resolved: drbd: use after free in drbd_create_device() The drbd_destroy_connection() frees the "connection" so use the _safe() iterator to prevent a use after free.

In the Linux kernel, the following vulnerability has been resolved: ath11k: free peer for station when disconnect from AP for QCA6390/WCN6855 Commit b4a0f54156ac ("ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855") is to fix firmware crash by changing the WMI command sequence, but actually skip all the peer delete operation, then it lead commit 58595c9874c6 ("ath11k: Fixing dangling pointer issue upon peer delete failure") not take effect, and then happened a use-after-free warning from KASAN. because the peer->sta is not set to NULL and then used later. Change to only skip the WMI_PEER_DELETE_CMDID for QCA6390/WCN6855. log of user-after-free: [ 534.888665] BUG: KASAN: use-after-free in ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888696] Read of size 8 at addr ffff8881396bb1b8 by task rtcwake/2860 [ 534.888705] CPU: 4 PID: 2860 Comm: rtcwake Kdump: loaded Tainted: G W 5.15.0-wt-ath+ #523 [ 534.888712] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 534.888716] Call Trace: [ 534.888720] <IRQ> [ 534.888726] dump_stack_lvl+0x57/0x7d [ 534.888736] print_address_description.constprop.0+0x1f/0x170 [ 534.888745] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888771] kasan_report.cold+0x83/0xdf [ 534.888783] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888810] ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888840] ath11k_dp_rx_process_mon_status+0x529/0xa70 [ath11k] [ 534.888874] ? ath11k_dp_rx_mon_status_bufs_replenish+0x3f0/0x3f0 [ath11k] [ 534.888897] ? check_prev_add+0x20f0/0x20f0 [ 534.888922] ? __lock_acquire+0xb72/0x1870 [ 534.888937] ? find_held_lock+0x33/0x110 [ 534.888954] ath11k_dp_rx_process_mon_rings+0x297/0x520 [ath11k] [ 534.888981] ? rcu_read_unlock+0x40/0x40 [ 534.888990] ? ath11k_dp_rx_pdev_alloc+0xd90/0xd90 [ath11k] [ 534.889026] ath11k_dp_service_mon_ring+0x67/0xe0 [ath11k] [ 534.889053] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889075] call_timer_fn+0x167/0x4a0 [ 534.889084] ? add_timer_on+0x3b0/0x3b0 [ 534.889103] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 534.889117] __run_timers.part.0+0x539/0x8b0 [ 534.889123] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889157] ? call_timer_fn+0x4a0/0x4a0 [ 534.889164] ? mark_lock_irq+0x1c30/0x1c30 [ 534.889173] ? clockevents_program_event+0xdd/0x280 [ 534.889189] ? mark_held_locks+0xa5/0xe0 [ 534.889203] run_timer_softirq+0x97/0x180 [ 534.889213] __do_softirq+0x276/0x86a [ 534.889230] __irq_exit_rcu+0x11c/0x180 [ 534.889238] irq_exit_rcu+0x5/0x20 [ 534.889244] sysvec_apic_timer_interrupt+0x8e/0xc0 [ 534.889251] </IRQ> [ 534.889254] <TASK> [ 534.889259] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 534.889265] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 534.889271] Code: 74 24 10 e8 ea c2 bf fd 48 89 ef e8 12 53 c0 fd 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 13 a7 b5 fd 65 8b 05 cc d9 9c 5e 85 c0 74 0a 5b 5d c3 e8 a0 ee [ 534.889276] RSP: 0018:ffffc90002e5f880 EFLAGS: 00000206 [ 534.889284] RAX: 0000000000000006 RBX: 0000000000000200 RCX: ffffffff9f256f10 [ 534.889289] RDX: 0000000000000000 RSI: ffffffffa1c6e420 RDI: 0000000000000001 [ 534.889293] RBP: ffff8881095e6200 R08: 0000000000000001 R09: ffffffffa40d2b8f [ 534.889298] R10: fffffbfff481a571 R11: 0000000000000001 R12: ffff8881095e6e68 [ 534.889302] R13: ffffc90002e5f908 R14: 0000000000000246 R15: 0000000000000000 [ 534.889316] ? mark_lock+0xd0/0x14a0 [ 534.889332] klist_next+0x1d4/0x450 [ 534.889340] ? dpm_wait_for_subordinate+0x2d0/0x2d0 [ 534.889350] device_for_each_child+0xa8/0x140 [ 534.889360] ? device_remove_class_symlinks+0x1b0/0x1b0 [ 534.889370] ? __lock_release+0x4bd/0x9f0 [ 534.889378] ? dpm_suspend+0x26b/0x3f0 [ 534.889390] dpm_wait_for_subordinate+ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ref_tracker: implement use-after-free detection Whenever ref_tracker_dir_init() is called, mark the struct ref_tracker_dir as dead. Test the dead status from ref_tracker_alloc() and ref_tracker_free() This should detect buggy dev_put()/dev_hold() happening too late in netdevice dismantle process.

In the Linux kernel, the following vulnerability has been resolved: skbuff: fix coalescing for page_pool fragment recycling Fix a use-after-free when using page_pool with page fragments. We encountered this problem during normal RX in the hns3 driver: (1) Initially we have three descriptors in the RX queue. The first one allocates PAGE1 through page_pool, and the other two allocate one half of PAGE2 each. Page references look like this: RX_BD1 _______ PAGE1 RX_BD2 _______ PAGE2 RX_BD3 _________/ (2) Handle RX on the first descriptor. Allocate SKB1, eventually added to the receive queue by tcp_queue_rcv(). (3) Handle RX on the second descriptor. Allocate SKB2 and pass it to netif_receive_skb(): netif_receive_skb(SKB2) ip_rcv(SKB2) SKB3 = skb_clone(SKB2) SKB2 and SKB3 share a reference to PAGE2 through skb_shinfo()->dataref. The other ref to PAGE2 is still held by RX_BD3: SKB2 ---+- PAGE2 SKB3 __/ / RX_BD3 _________/ (3b) Now while handling TCP, coalesce SKB3 with SKB1: tcp_v4_rcv(SKB3) tcp_try_coalesce(to=SKB1, from=SKB3) // succeeds kfree_skb_partial(SKB3) skb_release_data(SKB3) // drops one dataref SKB1 _____ PAGE1 \____ SKB2 _____ PAGE2 / RX_BD3 _________/ In skb_try_coalesce(), __skb_frag_ref() takes a page reference to PAGE2, where it should instead have increased the page_pool frag reference, pp_frag_count. Without coalescing, when releasing both SKB2 and SKB3, a single reference to PAGE2 would be dropped. Now when releasing SKB1 and SKB2, two references to PAGE2 will be dropped, resulting in underflow. (3c) Drop SKB2: af_packet_rcv(SKB2) consume_skb(SKB2) skb_release_data(SKB2) // drops second dataref page_pool_return_skb_page(PAGE2) // drops one pp_frag_count SKB1 _____ PAGE1 \____ PAGE2 / RX_BD3 _________/ (4) Userspace calls recvmsg() Copies SKB1 and releases it. Since SKB3 was coalesced with SKB1, we release the SKB3 page as well: tcp_eat_recv_skb(SKB1) skb_release_data(SKB1) page_pool_return_skb_page(PAGE1) page_pool_return_skb_page(PAGE2) // drops second pp_frag_count (5) PAGE2 is freed, but the third RX descriptor was still using it! In our case this causes IOMMU faults, but it would silently corrupt memory if the IOMMU was disabled. Change the logic that checks whether pp_recycle SKBs can be coalesced. We still reject differing pp_recycle between 'from' and 'to' SKBs, but in order to avoid the situation described above, we also reject coalescing when both 'from' and 'to' are pp_recycled and 'from' is cloned. The new logic allows coalescing a cloned pp_recycle SKB into a page refcounted one, because in this case the release (4) will drop the right reference, the one taken by skb_try_coalesce().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set hci_cmd_sync_queue shall return an error if HCI_UNREGISTER flag has been set as that means hci_unregister_dev has been called so it will likely cause a uaf after the timeout as the hdev will be freed.

In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix possible use-after-free in transport error_recovery work While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix possible use-after-free in transport error_recovery work While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state.

Guest triggered use-after-free in Linux xen-netback A malicious or buggy network PV frontend can force Linux netback to disable the interface and terminate the receive kernel thread associated with queue 0 in response to the frontend sending a malformed packet. Such kernel thread termination will lead to a use-after-free in Linux netback when the backend is destroyed, as the kernel thread associated with queue 0 will have already exited and thus the call to kthread_stop will be performed against a stale pointer.

In the Linux kernel, the following vulnerability has been resolved: e100: Fix possible use after free in e100_xmit_prepare In e100_xmit_prepare(), if we can't map the skb, then return -ENOMEM, so e100_xmit_frame() will return NETDEV_TX_BUSY and the upper layer will resend the skb. But the skb is already freed, which will cause UAF bug when the upper layer resends the skb. Remove the harmful free.

In the Linux kernel, the following vulnerability has been resolved: mctp: fix use after free Clang static analysis reports this problem route.c:425:4: warning: Use of memory after it is freed trace_mctp_key_acquire(key); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ When mctp_key_add() fails, key is freed but then is later used in trace_mctp_key_acquire(). Add an else statement to use the key only when mctp_key_add() is successful.

In the Linux kernel, the following vulnerability has been resolved: peci: cpu: Fix use-after-free in adev_release() When auxiliary_device_add() returns an error, auxiliary_device_uninit() is called, which causes refcount for device to be decremented and .release callback will be triggered. Because adev_release() re-calls auxiliary_device_uninit(), it will cause use-after-free: [ 1269.455172] WARNING: CPU: 0 PID: 14267 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15 [ 1269.464007] refcount_t: underflow; use-after-free.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcmu: Fix possible page UAF tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not take refcount properly and just returns page pointer. When tcmu_try_get_data_page() returns, the returned page may have been freed by tcmu_blocks_release(). We need to get_page() under cmdr_lock to avoid concurrent tcmu_blocks_release().

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Prevent use after free on completion memory On driver unload any pending descriptors are flushed at the time the interrupt is freed: idxd_dmaengine_drv_remove() -> drv_disable_wq() -> idxd_wq_free_irq() -> idxd_flush_pending_descs(). If there are any descriptors present that need to be flushed this flow triggers a "not present" page fault as below: BUG: unable to handle page fault for address: ff391c97c70c9040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page The address that triggers the fault is the address of the descriptor that was freed moments earlier via: drv_disable_wq()->idxd_wq_free_resources() Fix the use after free by freeing the descriptors after any possible usage. This is done after idxd_wq_reset() to ensure that the memory remains accessible during possible completion writes by the device.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Don't remove map on creater_process and device_release Do not remove the map from the list on error path in fastrpc_init_create_process, instead call fastrpc_map_put, to avoid use-after-free. Do not remove it on fastrpc_device_release either, call fastrpc_map_put instead. The fastrpc_free_map is the only proper place to remove the map. This is called only after the reference count is 0.