The Crimson 3.2 Windows-based configuration tool allows users with administrative access to define new passwords for users and to download the resulting security configuration to a device. If such a password contains the percent (%) character, invalid values will be included, potentially truncating the string if a NUL is encountered. If the simplified password is not detected by the administrator, the device might be left in a vulnerable state as a result of more-easily compromised credentials. Note that passwords entered via the Crimson system web server do not suffer from this vulnerability.
The affected product is vulnerable due to an undocumented interface found on the device, which may allow an attacker to execute commands as root on the device on the N-Tron 702-W / 702M12-W (all versions).
A hard-coded cryptographic key vulnerability was identified in Red Lion Controls Sixnet-Managed Industrial Switches running firmware Version 5.0.196 and Stride-Managed Ethernet Switches running firmware Version 5.0.190. Vulnerable versions of Stride-Managed Ethernet switches and Sixnet-Managed Industrial switches use hard-coded HTTP SSL/SSH keys for secure communication. Because these keys cannot be regenerated by users, all products use the same key. The attacker could disrupt communication or compromise the system. CVSS v3 base score: 10, CVSS vector string: (AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H). Red Lion Controls recommends updating to SLX firmware Version 5.3.174.
Weak Password Requirements in GitHub repository janeczku/calibre-web prior to 0.6.20.
Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.12.
Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.10.
The TIBCO EBX Web Server component of TIBCO Software Inc.'s TIBCO EBX, TIBCO EBX, TIBCO EBX, and TIBCO Product and Service Catalog powered by TIBCO EBX contains a vulnerability that under certain specific conditions allows an attacker to enter a password other than the legitimate password and it will be accepted as valid. Affected releases are TIBCO Software Inc.'s TIBCO EBX: versions 5.8.123 and below, TIBCO EBX: versions 5.9.3, 5.9.4, 5.9.5, 5.9.6, 5.9.7, 5.9.8, 5.9.9, 5.9.10, 5.9.11, 5.9.12, 5.9.13, and 5.9.14, TIBCO EBX: versions 6.0.0 and 6.0.1, and TIBCO Product and Service Catalog powered by TIBCO EBX: version 1.0.0.
Baseon Lantronix MSS devices do not require a password for TELNET access.
In Gradle Enterprise before 2023.1, a remote attacker may be able to gain access to a new installation (in certain installation scenarios) because of a non-unique initial system user password. Although this password must be changed upon the first login, it is possible that an attacker logs in before the legitimate administrator logs in.
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ftpuser1 account has a blank password, which cannot be changed.
An access control vulnerability in Hame SD1 Wi-Fi firmware <=V.20140224154640 allows an attacker to get system administrator through an open Telnet service.
The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.
A weak password requirement vulnerability exists in the Create New User function of MintHCM RELEASE 3.0.8, which could lead an attacker to easier password brute-forcing.
Weak password requirements in OpenC3 COSMOS v6.0.0 allow attackers to bypass authentication via a brute force attack.
An issue was discovered on Marbella KR8s Dashcam FF 2.0.8 devices. Once access is gained either by default, common, or cracked passwords, the video recordings (containing sensitive routes, conversations, and footage) are open for downloading by creating a socket to command port 7777, and then downloading video via port 7778 and audio via port 7779.
Victure RX1800 EN_V1.0.0_r12_110933 was discovered to utilize a weak default password which includes the last 8 digits of the Mac address.
Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.843 Application 20.0.1923 allows Weak Password Encryption / Encoding OVE-20230524-0007.
Weak password requirements issue exists in CHOCO TEI WATCHER mini (IB-MCT001) all versions. If this issue is exploited, a brute-force attack may allow an attacker unauthorized access and login.
I-doit pro 25 and below and I-doit open 25 and below employ weak password requirements for Administrator account creation. Attackers are able to easily guess users' passwords via a bruteforce attack.
Beijing Zed-3 Technologies Co.,Ltd VoIP simpliclty ASG 8.5.0.17807 (20181130-16:12) has a Weak password vulnerability.
IBM Security Guardium 11.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 196279.
Iteris Vantage Velocity Field Unit 2.3.1 and 2.4.2 devices have two users that are not documented and are configured with weak passwords (User bluetooth, password bluetooth; User eclipse, password eclipse). Also, bluetooth is the root password.
Renato v0.17.0 employs weak password complexity requirements, allowing attackers to crack user passwords via brute-force attacks.
Mealie 1.0.0beta3 employs weak password requirements which allows attackers to potentially gain unauthorized access to the application via brute-force attacks.
IBM Robotic Process Automation 21.0.0, 21.0.1, and 21.0.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 230634.
The OKLOK (3.1.1) mobile companion app for Fingerprint Bluetooth Padlock FB50 (2.3) has weak password requirements combined with improper restriction of excessive authentication attempts, which could allow a remote attacker to discover user credentials and obtain access via a brute force attack.
A CWE-521: Weak Password Requirements vulnerability exists that could allow an attacker to gain control of the device when the attacker brute forces the password. Affected Products: C-Bus Network Automation Controller - LSS5500NAC (Versions prior to V1.10.0), Wiser for C-Bus Automation Controller - LSS5500SHAC (Versions prior to V1.10.0), Clipsal C-Bus Network Automation Controller - 5500NAC (Versions prior to V1.10.0), Clipsal Wiser for C-Bus Automation Controller - 5500SHAC (Versions prior to V1.10.0), SpaceLogic C-Bus Network Automation Controller - 5500NAC2 (Versions prior to V1.10.0), SpaceLogic C-Bus Application Controller - 5500AC2 (Versions prior to V1.10.0)
Default Credentail vulnerabilities allows access to an Aspect device using publicly available default credentials since the system does not require the installer to change default credentials. Affected products: ABB ASPECT - Enterprise v3.07.02; NEXUS Series v3.07.02; MATRIX Series v3.07.02
In Moxa EDS-G516E Series firmware, Version 5.2 or lower, weak password requirements may allow an attacker to gain access using brute force.
Weak Password Requirements in GitHub repository ikus060/minarca prior to 4.2.2.
In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the application utilizes weak password requirements, which may allow an attacker to gain unauthorized access.
An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. Insufficient password requirements for the MGate web application may allow an attacker to gain access by brute-forcing account passwords.
Weak Password Requirements vulnerability in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.1.0 through 1.6.0. When users change their password to a simple password (with any character or symbol), attackers can easily guess the user's password and access the account. Users are advised to upgrade to Apache InLong's 1.7.0 or cherry-pick https://github.com/apache/inlong/pull/7805 https://github.com/apache/inlong/pull/7805 to solve it.
An issue was discovered in Infiray IRAY-A8Z3 1.0.957. There is a blank root password for TELNET by default.
Weak Password Requirements in GitHub repository notrinos/notrinoserp prior to 0.7.
ACTi cameras including the D, B, I, and E series using firmware version A1D-500-V6.11.31-AC use non-random default credentials across all devices. A remote attacker can take complete control of a device using default admin credentials.
An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges on the device via poor credential management.
Weak Password Requirements in GitHub repository kromitgmbh/titra prior to 0.78.1.
Weak Password Requirements in GitHub repository modoboa/modoboa prior to 2.1.0.
Weak Password Requirements in GitHub repository polonel/trudesk prior to 1.2.2.
Weak default root user credentials allow remote attackers to easily obtain OS superuser privileges over the open TCP port for SSH.
The built-in web service for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower does not require users to have strong passwords.
Cloudexplorer-lite is an open source cloud software stack. Weak passwords can be easily guessed and are an easy target for brute force attacks. This can lead to an authentication system failure and compromise system security. Versions of cloudexplorer-lite prior to 1.2.0 did not enforce strong passwords. This vulnerability has been fixed in version 1.2.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.
There are no requirements for setting a complex password for PiiGAB M-Bus, which could contribute to a successful brute force attack if the password is inline with recommended password guidelines.
An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. The password for the PostgreSQL wguest account is weak.
HCL Compass is vulnerable to insecure password requirements. An attacker could easily guess the password and gain access to user accounts.
An issue discovered in Pfsense CE version 2.6.0 allows attackers to compromise user accounts via weak password requirements.
In IQrouter through 3.3.1, the Lua function reset_password in the web-panel allows remote attackers to change the root password arbitrarily. Note: The vendor claims that this vulnerability can only occur on a brand-new network that, after initiating the forced initial configuration (which has a required step for setting a secure password on the system), makes this CVE invalid. This vulnerability is “true for any unconfigured release of OpenWRT, and true of many other new Linux distros prior to being configured for the first time”
The NETGEAR Insight application before 2.42 for Android and iOS is affected by password mismanagement.
An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. The "user" account has a blank password.