Wiki.js is a wiki app built on Node.js. In affected versions an authenticated user with write access on a restricted set of paths can update a page outside the allowed paths by specifying a different target page ID while keeping the path intact. The access control incorrectly check the path access against the user-provided values instead of the actual path associated to the page ID. Commit https://github.com/Requarks/wiki/commit/411802ec2f654bb5ed1126c307575b81e2361c6b fixes this vulnerability by checking access control on the path associated with the page ID instead of the user-provided value. When the path is different than the current value, a second access control check is then performed on the user-provided path before the move operation.
An issue discovered in Pfsense CE version 2.6.0 allows attackers to change the password of any user without verification.
VMware ESXi contains an authentication bypass vulnerability. A malicious actor with sufficient Active Directory (AD) permissions can gain full access to an ESXi host that was previously configured to use AD for user management https://blogs.vmware.com/vsphere/2012/09/joining-vsphere-hosts-to-active-directory.html by re-creating the configured AD group ('ESXi Admins' by default) after it was deleted from AD.
An unauthorized access issue found in XiaoBingby TeaCMS 2.3.3 allows attackers to escalate privileges via the id and keywords parameter(s).
Improper Authentication vulnerability in HYPR Keycloak Authenticator Extension allows Authentication Abuse.This issue affects HYPR Keycloak Authenticator Extension: before 7.10.2, before 8.0.3.
It was found that there were no permission checks performed in the Distributed Fork plugin before and including 1.5.0 for Jenkins that provides the dist-fork CLI command beyond the basic check for Overall/Read permission, allowing anyone with that permission to run arbitrary shell commands on all connected nodes.
Authentication Bypass by Primary Weakness in GitHub repository ikus060/rdiffweb prior to 2.5.5.
A vulnerability has been identified in the management interface of Citrix NetScaler Application Delivery Controller (ADC) and NetScaler Gateway 10.1 before build 135.18, 10.5 before build 66.9, 10.5e before build 60.7010.e, 11.0 before build 70.16, 11.1 before build 55.13, and 12.0 before build 53.13 (except for build 41.24) that, if exploited, could allow an attacker with access to the NetScaler management interface to gain administrative access to the appliance.
It was found that Keycloak oauth would permit an authenticated resource to obtain an access/refresh token pair from the authentication server, permitting indefinite usage in the case of permission revocation. An attacker on an already compromised resource could use this flaw to grant himself continued permissions and possibly conduct further attacks.
Unspecified vulnerability in Sun Integrated Lights-Out Manager (ILOM) 2.0.1.5 through 2.0.4.26 allows remote authenticated users to (1) access the service processor (SP) and cause a denial of service (shutdown or reboot), or (2) access the host operating system and have an unspecified impact, via unknown vectors.
In the Macally WIFISD2-2A82 Media and Travel Router 2.000.010, the Guest user is able to reset its own password. This process has a vulnerability which can be used to take over the administrator account and results in shell access. As the admin user may read the /etc/shadow file, the password hashes of each user (including root) can be dumped. The root hash can be cracked easily which results in a complete system compromise.
A command injection vulnerability could allow an authenticated user to execute operating system commands as root via a specially crafted API request.
An access control issue in TrendNet TV-IP572PI v1.0 allows unauthenticated attackers to access sensitive system information.
A vulnerability within the authentication process of Abacus ERP allows a remote attacker to bypass the second authentication factor. This issue affects: Abacus ERP v2022 versions prior to R1 of 2022-01-15; v2021 versions prior to R4 of 2022-01-15; v2020 versions prior to R6 of 2022-01-15; v2019 versions later than R5 (service pack); v2018 versions later than R5 (service pack). This issue does not affect: Abacus ERP v2019 versions prior to R5 of 2020-03-15; v2018 versions prior to R7 of 2020-04-15; v2017 version and prior versions and prior versions.
Improper authentication in the Intel(R) SUR software before version 2.4.8902 may allow a privileged user to potentially enable escalation of privilege via network access.
TYPO3 is an open source, PHP based web content management system. In versions on the 12.x branch prior to 12.4.31 LTS and the 13.x branch prior to 13.4.2 LTS, the multifactor authentication (MFA) dialog presented during backend login can be bypassed due to insufficient enforcement of access restrictions on all backend routes. Successful exploitation requires valid backend user credentials, as MFA can only be bypassed after successful authentication. Users should update to TYPO3 version 12.4.31 LTS or 13.4.12 LTS to fix the problem.
cPanel before 55.9999.141 does not perform as two-factor authentication check when possessing another account (SEC-101).
Cisco RV110W, RV130W, and RV215W devices have an incorrect RBAC configuration for the default account, which allows remote authenticated users to obtain root access via a login session with that account, aka Bug IDs CSCuv90139, CSCux58175, and CSCux73557.
cp.php in DeluxeBB 1.09 does not verify that the membercookie parameter corresponds to the authenticated member during a profile update, which allows remote authenticated users to change the e-mail addresses of arbitrary accounts via a modified membercookie parameter, a different vector than CVE-2006-4078. NOTE: this can be leveraged for administrative access by requesting password-reset e-mail through a lostpw action to misc.php.
Unverified Password Change in GitHub repository pimcore/admin-ui-classic-bundle prior to 1.2.0.
TRENDnet WiFi Baby Cam TV-IP743SIC has a password of admin for the backdoor root account.
Certain Zyxel products have a locally accessible binary that allows a non-root user to generate a password for an undocumented user account that can be used for a TELNET session as root. This affects NAS520 V5.21(AASZ.4)C0, V5.21(AASZ.0)C0, V5.11(AASZ.3)C0, and V5.11(AASZ.0)C0; NAS542 V5.11(ABAG.0)C0, V5.20(ABAG.1)C0, and V5.21(ABAG.3)C0; NSA325 v2_V4.81(AALS.0)C0 and V4.81(AAAJ.1)C0; NSA310 4.22(AFK.0)C0 and 4.22(AFK.1)C0; NAS326 V5.21(AAZF.8)C0, V5.11(AAZF.4)C0, V5.11(AAZF.2)C0, and V5.11(AAZF.3)C0; NSA310S V4.75(AALH.2)C0; NSA320S V4.75(AANV.2)C0 and V4.75(AANV.1)C0; NSA221 V4.41(AFM.1)C0; and NAS540 V5.21(AATB.5)C0 and V5.21(AATB.3)C0.
In GitLab before 13.0.12, 13.1.6, and 13.2.3, improper access control was used on the Applications page
A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02; SIPROTEC 7SJ686 : All versions < V 4.87; SIPROTEC 7UT686 : All versions < V 4.02; SIPROTEC 7SD686 : All versions < V 4.05; SIPROTEC 7SJ66 : All versions < V 4.30. Attackers with network access to the device's web interface (port 80/tcp) could possibly circumvent authentication and perform certain administrative operations. A legitimate user must be logged into the web interface for the attack to be successful.
Advanced Authentication versions prior to 6.3 SP4 have a potential broken authentication due to improper session management issue.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.
The HomeAutomationGateway service in MiCasaVerde VeraLite with firmware 1.5.408 allows (1) remote attackers to execute arbitrary Lua code via a RunLua action in a request to upnp/control/hag on port 49451 or (2) remote authenticated users to execute arbitrary Lua code via a RunLua action in a request to port_49451/upnp/control/hag.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.
Improper authentication in the Intel(R) In-Band Manageability software before version 2.13.0 may allow a privileged user to potentially enable escalation of privilege via network access.
A remote code execution vulnerability exists in Microsoft Exchange software when the software fails to properly handle objects in memory, aka 'Microsoft Exchange Memory Corruption Vulnerability'.
Improper authentication in Veeam Backup & Replication 9.5U3, 9.5U4,10.x and 11.x component used for Microsoft System Center Virtual Machine Manager (SCVMM) allows attackers execute arbitrary code via Veeam.Backup.PSManager.exe
A flaw was found in StarWind Stack. The endpoint for setting a new password doesn’t check the current username and old password. An attacker could reset any local user password (including system/administrator user) using any available user This affects StarWind SAN and NAS v0.2 build 1633.
IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, and 2.0.6 could allow a remote attacker to bypass security restrictions when configured with SAML authentication. By sending a specially crafted HTTP request, an attacker could exploit this vulnerability to bypass the authentication process and gain full administrative access to the system. IBM X-Force ID: 180532.
An issue was discovered on V-SOL V1600D V2.03.69 and V2.03.57, V1600D4L V1.01.49, V1600D-MINI V1.01.48, V1600G1 V2.0.7 and V1.9.7, and V1600G2 V1.1.4 OLT devices. It is possible to elevate the privilege of a CLI user (to full administrative access) by using the password !j@l#y$z%x6x7q8c9z) for the enable command.
Authentication Bypass Using an Alternate Path or Channel vulnerability in appsbd Vitepos allows Authentication Abuse. This issue affects Vitepos: from n/a through 3.1.7.
ScreenConnect versions 25.2.3 and earlier versions may be susceptible to a ViewState code injection attack. ASP.NET Web Forms use ViewState to preserve page and control state, with data encoded using Base64 protected by machine keys. It is important to note that to obtain these machine keys, privileged system level access must be obtained. If these machine keys are compromised, attackers could create and send a malicious ViewState to the website, potentially leading to remote code execution on the server. The risk does not originate from a vulnerability introduced by ScreenConnect, but from platform level behavior. This had no direct impact to ScreenConnect Client. ScreenConnect 2025.4 patch disables ViewState and removes any dependency on it.
A flaw was found in the way Samba, as an Active Directory Domain Controller, implemented Kerberos name-based authentication. The Samba AD DC, could become confused about the user a ticket represents if it did not strictly require a Kerberos PAC and always use the SIDs found within. The result could include total domain compromise.
ColdFusion versions 2023.12, 2021.18, 2025.0 and earlier are affected by an Improper Authentication vulnerability that could result in arbitrary code execution in the context of the current user. A high-privileged attacker could leverage this vulnerability to bypass authentication mechanisms and execute code. Exploitation of this issue does not require user interaction and scope is changed.
An issue was discovered in OverIT Geocall 6.3 before build 2:346977. Weak authentication and session management allows an authenticated user to obtain access to the Administrative control panel and execute administrative functions.
An authentication issue was discovered in GitLab that allowed a bypass of email verification. This was addressed in GitLab 12.1.2 and 12.0.4.
An exploitable authentication bypass vulnerability exists in the hostname processing of the Moxa AWK-3131A firmware version 1.13. A specially configured device hostname can cause the device to interpret select remote traffic as local traffic, resulting in a bypass of web authentication. An attacker can send authenticated SNMP requests to trigger this vulnerability.
GLPI is a free asset and IT management software package. Starting in version 0.80 and prior to version 10.0.17, an administrator with access to the sent notifications contents can take control of an account with higher privileges. Version 10.0.17 contains a patch for this issue.
A Remote Authentication bypass in Aruba ClearPass Policy Manager leads to complete cluster compromise. An authentication flaw in all versions of ClearPass could allow an attacker to compromise the entire cluster through a specially crafted API call. Network access to the administrative web interface is required to exploit this vulnerability. Resolution: Fixed in 6.7.6 and 6.6.10-hotfix.
An Incorrect Access Control issue was discovered on MicroDigital N-series cameras with firmware through 6400.0.8.5 because any valid cookie can be used to make requests as an admin.
The WooCommerce Order Proposal plugin for WordPress is vulnerable to privilege escalation via order proposal in all versions up to and including 2.0.5. This is due to the improper implementation of allow_payment_without_login function. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to log in to WordPress as an arbitrary user account, including administrators.
NordVPN 3.3.10 for macOS suffers from a root privilege escalation vulnerability. The vulnerability stems from its privileged helper tool's implemented XPC service. This XPC service is responsible for receiving and processing new OpenVPN connection requests from the main application. Unfortunately this XPC service is not protected, which allows arbitrary applications to connect and send it XPC messages. An attacker can send a crafted XPC message to the privileged helper tool requesting it make a new OpenVPN connection. Because he or she controls the contents of the XPC message, the attacker can specify the location of the openvpn executable, which could point to something malicious they control located on disk. Without validation of the openvpn executable, this will give the attacker code execution in the context of the privileged helper tool.
An issue in Ocuco Innovation - JOBMANAGER.EXE v2.10.24.16 allows attackers to bypass authentication and escalate privileges to Administrator via a crafted TCP packet.
The logins command in HP-UX B.11.31, B.11.23, and B.11.11 does not correctly report password status, which allows remote attackers to obtain privileges when certain "password issues" are not detected.