A vulnerability in the HTTP Server feature of Cisco IOS XE Software when the Telephony Service feature is enabled could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a null pointer dereference when accessing specific URLs. An attacker could exploit this vulnerability by sending crafted HTTP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, causing a DoS condition on the affected device.
A vulnerability in the DHCPv6 relay agent of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific fields in a DHCPv6 RELAY-REPLY message. An attacker could exploit this vulnerability by sending a crafted DHCPv6 packet to any IPv6 address that is configured on an affected device. A successful exploit could allow the attacker to cause the dhcp_snoop process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition.
A vulnerability in the Internet Key Exchange version 2 (IKEv2) protocol for VPN termination of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted IKEv2 traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
A vulnerability in Cisco SIP IP Phone Software for Cisco IP Phone 7800 Series and 8800 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected phone. The vulnerability is due to insufficient validation of input Session Initiation Protocol (SIP) packets. An attacker could exploit this vulnerability by altering the SIP replies that are sent to the affected phone during the registration process. A successful exploit could allow the attacker to cause the phone to reboot and not complete the registration process.
A vulnerability in the web server of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to cause the web server process to crash, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of user-supplied input on the web interface. An attacker could exploit this vulnerability by submitting a crafted HTTP request to certain endpoints of the affected software. A successful exploit could allow an attacker to cause the web server to crash. Physical access to the device may be required for a restart.
A vulnerability in the Ident protocol handler of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability exists because the affected software incorrectly handles memory structures, leading to a NULL pointer dereference. An attacker could exploit this vulnerability by opening a TCP connection to specific ports and sending traffic over that connection. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.
Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated attacker to cause process crashes, which could result in a denial of service (DoS) condition on an affected device. The attack vector is configuration dependent and could be remote or adjacent. For more information about the attack vector, see the Details section of this advisory. The vulnerability is due to insufficient error handling when the affected software parses Cisco Fabric Services messages. An attacker could exploit this vulnerability by sending malicious Cisco Fabric Services messages to an affected device. A successful exploit could allow the attacker to cause a reload of an affected device, which could result in a DoS condition.
A vulnerability in the RESTCONF and NETCONF-YANG access control list (ACL) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect processing of the ACL that is tied to the RESTCONF or NETCONF-YANG feature. An attacker could exploit this vulnerability by accessing the device using RESTCONF or NETCONF-YANG. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
A vulnerability in the TLS processing feature of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an issue that occurs when TLS traffic is processed. An attacker could exploit this vulnerability by sending certain TLS traffic over IPv4 through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition and impacting traffic to and through the affected device.
A vulnerability in the common Session Initiation Protocol (SIP) library of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient sanity checks on an internal data structure. An attacker could exploit this vulnerability by sending a sequence of malicious SIP messages to an affected device. An exploit could allow the attacker to cause a NULL pointer dereference, resulting in a crash of the iosd process. This triggers a reload of the device.
A vulnerability in the TCP proxy functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper handling of TCP flows. An attacker could exploit this vulnerability by sending a crafted stream of TCP traffic through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Cisco IOS XE 3.4 before 3.4.2S and 3.5 before 3.5.1S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) via malformed ICMP error packets associated with a (1) TCP or (2) UDP session that is under inspection by the Zone-Based Firewall (ZBFW) component, aka Bug ID CSCtt26470.
The T1/E1 driver-queue functionality in Cisco IOS 12.2 and 15.0 through 15.3, when an HDLC32 driver is used, allows remote attackers to cause a denial of service (interface queue wedge) via bursty network traffic, aka Bug ID CSCub67465.
The DNS-over-TCP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 DNS TCP stream, aka Bug ID CSCuf28733.
The UDP process in Cisco IOS XR 4.3.1 does not free packet memory upon detecting full packet queues, which allows remote attackers to cause a denial of service (memory consumption) via UDP packets to listening ports, aka Bug ID CSCue69413.
Memory leak in the TCP listener in Cisco IOS 9.x, 10.x, 11.x, and 12.x allows remote attackers to cause a denial of service by sending crafted TCP traffic to an IPv4 address on the IOS device.
A vulnerability in dynamic access policies (DAP) functionality of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to improper processing of HostScan data received from the Posture (HostScan) module. An attacker could exploit this vulnerability by sending crafted HostScan data to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU"] This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication.
A vulnerability in the DNS inspection handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to a lack of proper processing of incoming requests. An attacker could exploit this vulnerability by sending crafted DNS requests at a high rate to an affected device. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.
Multiple memory leaks in Cisco IOS 15.1 before 15.1(4)M7 allow remote attackers to cause a denial of service (memory consumption or device reload) by sending a crafted SIP message over (1) IPv4 or (2) IPv6, aka Bug IDs CSCuc42558 and CSCug25383.
Race condition in the IPv6 virtual fragmentation reassembly (VFR) implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.3 allows remote attackers to cause a denial of service (device reload or hang) via fragmented IPv6 packets, aka Bug ID CSCud64812.
The Clientless SSL VPN feature in Cisco Adaptive Security Appliance (ASA) Software 8.x before 8.2(5.44), 8.3.x before 8.3(2.39), 8.4.x before 8.4(5.7), 8.6.x before 8.6(1.12), 9.0.x before 9.0(2.6), and 9.1.x before 9.1(1.7) allows remote attackers to cause a denial of service (device reload) via crafted HTTPS requests, aka Bug ID CSCua22709.
A vulnerability in the cache server within Cisco Videoscape Distribution Suite (VDS) for Television 3.2(5)ES1 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on a targeted appliance. The vulnerability is due to excessive mapped connections exhausting the allotted resources within the system. An attacker could exploit this vulnerability by sending large amounts of inbound traffic to a device with the intention of overloading certain resources. A successful exploit could cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc39260.
A vulnerability in the Session Initiation Protocol (SIP) implementation of Cisco IP Phone 8851 11.0(0.1) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to an abnormal SIP message. An attacker could exploit this vulnerability by manipulating the CANCEL packet. An exploit could allow the attacker to cause a disruption of service to the phone. Cisco Bug IDs: CSCvc34795.
A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243.
A vulnerability in the generic routing encapsulation (GRE) tunnel decapsulation feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a memory handling error that occurs when GRE traffic is processed. An attacker could exploit this vulnerability by sending a crafted GRE payload through an affected device. A successful exploit could allow the attacker to cause the device to restart, resulting in a DoS condition. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM"] This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication.
A vulnerability in the ingress UDP packet processing functionality of Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software 19.2 through 21.0 could allow an unauthenticated, remote attacker to cause both control function (CF) instances on an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient handling of user-supplied data by the affected software. An attacker could exploit this vulnerability by sending crafted UDP packets to the distributed instance (DI) network addresses of both CF instances on an affected system. A successful exploit could allow the attacker to cause an unhandled error condition on the affected system, which would cause the CF instances to reload and consequently cause the entire VPC to reload, resulting in the disconnection of all subscribers and a DoS condition on the affected system. This vulnerability can be exploited via IPv4 traffic only. Cisco Bug IDs: CSCvc01665 CSCvc35565.
A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072.
A vulnerability in the TCP throttling process for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to cause the system to consume additional memory, eventually forcing the device to restart, aka Memory Exhaustion. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP packets to a specific group of open listening ports on a targeted device. An exploit could allow the attacker to cause the system to consume additional memory. If enough available memory is consumed, the system will restart, creating a temporary denial of service (DoS) condition. The DoS condition will end after the device has finished the restart process. This vulnerability affects the following Cisco products: Connected Grid Network Management System, if running a software release prior to IoT-FND Release 4.0; IoT Field Network Director, if running a software release prior to IoT-FND Release 4.0. Cisco Bug IDs: CSCvc77164.
A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002.
A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812.
Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut50727.
The TCP reassembly feature in Cisco IOS XE 3.7 before 3.7.3S and 3.8 before 3.8.1S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) via large TCP packets that are processed by the (1) NAT or (2) ALG component, aka Bug ID CSCud72509.
The web framework on Cisco Web Security Appliance (WSA), Email Security Appliance (ESA), and Content Security Management Appliance (SMA) devices does not properly manage the state of HTTP and HTTPS sessions, which allows remote attackers to cause a denial of service (management GUI outage) via multiple TCP connections, aka Bug IDs CSCuj59411, CSCuf89818, and CSCuh05635.
A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.
Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493.
Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331.
Cisco IOS 15.0 through 15.3 and IOS XE 3.2 through 3.8, when a VRF interface exists, allows remote attackers to cause a denial of service (interface queue wedge) via crafted UDP RSVP packets, aka Bug ID CSCuf17023.
A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892.
Cisco IOS 12.2 through 12.4 and 15.0 through 15.3, and IOS XE 2.1 through 3.9, allows remote attackers to cause a denial of service (device reload) via crafted DHCP packets that are processed locally by a (1) server or (2) relay agent, aka Bug ID CSCug31561.
A vulnerability in the Session Initiation Protocol (SIP) UDP throttling process of Cisco Unified Communications Manager (Cisco Unified CM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection. An attacker could exploit this vulnerability by sending the affected device a high rate of SIP messages. An exploit could allow the attacker to cause the device to reload unexpectedly. The device and services will restart automatically. This vulnerability affects Cisco Unified Communications Manager (CallManager) releases prior to the first fixed release; the following list indicates the first minor release that includes the fix for this vulnerability: 10.5.2.14900-16 11.0.1.23900-5 11.5.1.12900-2. Cisco Bug IDs: CSCuz72455.
Cisco IOS XE 3.9 before 3.9.2S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) by sending malformed EoGRE packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCuf08269.
The PPTP ALG implementation in Cisco IOS XE 3.9 before 3.9.2S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) by sending many PPTP packets over NAT, aka Bug ID CSCuh19936.
The Zone-Based Firewall (ZFW) feature in Cisco IOS 15.1 through 15.2, when content filtering or HTTP ALG inspection is enabled, allows remote attackers to cause a denial of service (device reload or hang) via crafted IPv4 HTTP traffic, aka Bug ID CSCtx56174.
A denial-of-service in Cisco Unified IP Conference Station 7937G 1-4-4-0 through 1-4-5-7 allows attackers restart the device remotely through sending specially crafted packets. Note: We cannot prove this vulnerability exists. Out of an abundance of caution, this CVE is being assigned to better serve our customers and ensure all who are still running this product understand that the product is end of life and should be removed or upgraded. For more information on this, and how to upgrade, refer to the CVE’s reference information
Unspecified vulnerability in Cisco Adaptive Security Appliance (ASA) and PIX 7.1 before 7.1(2)49 and 7.2 before 7.2(2)17 allows remote attackers to cause a denial of service (device reload) via unknown vectors related to VPN connection termination and password expiry.
A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) and Cisco Content Security Management Appliance (SMA) could allow an unauthenticated, remote attacker to cause repeated crashes in some internal processes that are running on the affected devices, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation of email attachments. An attacker could exploit this vulnerability by sending an email message with a crafted attachment through an affected device. A successful exploit could allow the attacker to cause specific processes to crash repeatedly, resulting in the complete unavailability of both the Cisco Advanced Malware Protection (AMP) and message tracking features and in severe performance degradation while processing email. After the affected processes restart, the software resumes filtering for the same attachment, causing the affected processes to crash and restart again. A successful exploit could also allow the attacker to cause a repeated DoS condition. Manual intervention may be required to recover from this situation.
Memory leak in Cisco Prime Central for Hosted Collaboration Solution (HCS) Assurance 8.6 and 9.x before 9.2(1) allows remote attackers to cause a denial of service (memory consumption) via a flood of TCP packets, aka Bug ID CSCub59158.
Cisco Unified Communications Manager (Unified CM) 7.1(x) before 7.1(5b)su6a does not properly handle errors, which allows remote attackers to cause a denial of service (service disruption) via malformed registration messages, aka Bug ID CSCuf93466.
The IronPort Spam Quarantine (ISQ) component in the web framework in IronPort AsyncOS on Cisco Email Security Appliance devices before 7.1.5-106 and 7.3, 7.5, and 7.6 before 7.6.3-019 and Content Security Management Appliance devices before 7.9.1-102 and 8.0 before 8.0.0-404 allows remote attackers to cause a denial of service (service crash or hang) via a high rate of TCP connection attempts, aka Bug IDs CSCzv25573 and CSCzv81712.