A vulnerability in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code elevate privileges, execute arbitrary commands, bypass authentication and authorization protections, fetch and run unsigned software, or cause a denial of service (DoS).
Apply updates per vendor instructions.
The Cisco WAP4410N access point with firmware through 2.0.6.1, WRVS4400N router with firmware 1.x through 1.1.13 and 2.x through 2.0.2.1, and RVS4000 router with firmware through 2.0.3.2 allow remote attackers to read credential and configuration data, and execute arbitrary commands, via requests to the test interface on TCP port 32764, aka Bug IDs CSCum37566, CSCum43693, CSCum43700, and CSCum43685.
A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to perform a command injection attack and execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation by the web portal framework. An attacker could exploit this vulnerability by providing malicious input during web portal authentication. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
Directory traversal vulnerability in processImageSave.jsp in DCNM-SAN Server in Cisco Prime Data Center Network Manager (DCNM) before 6.2(1) allows remote attackers to write arbitrary files via the chartid parameter, aka Bug IDs CSCue77035 and CSCue77036. NOTE: this can be leveraged to execute arbitrary commands by using the JBoss autodeploy functionality.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Universal Plug-and-Play (UPnP) service of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of incoming UPnP traffic. An attacker could exploit this vulnerability by sending a crafted UPnP request to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a DoS condition. Cisco has not released software updates that address this vulnerability.
Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to perform unspecified actions and consequently execute arbitrary code via a crafted request to the Java RMI interface, related to a "command injection vulnerability," aka Bug ID CSCtf97085.
The CGI subsystem on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 allows remote attackers to execute arbitrary commands via a request to TCP port 443, related to a "command injection vulnerability," aka Bug ID CSCtf97221.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the web-based management interface of Cisco DNA Spaces Connector could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underling operating system with privileges of the web-based management application, which is running as a restricted user. This could result in changes being made to pages served by the web-based management application impacting the integrity or availability of the web-based management application.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient user input validation of incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device using root-level privileges. Cisco has not released software updates that address this vulnerability.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the request admin-tech command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the request admin-tech command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69852, CSCvi69856.
A vulnerability in the AutoIT service of Cisco Ultra Services Framework Staging Server could allow an unauthenticated, remote attacker to execute arbitrary shell commands as the Linux root user. The vulnerability is due to improper shell invocations. An attacker could exploit this vulnerability by crafting CLI command inputs to execute Linux shell commands as the root user. This vulnerability affects all releases of Cisco Ultra Services Framework Staging Server prior to Releases 5.0.3 and 5.1. Cisco Bug IDs: CSCvc76673.
An unspecified CGI script in Cisco FX-OS before 1.1.2 on Firepower 9000 devices and Cisco Unified Computing System (UCS) Manager before 2.2(4b), 2.2(5) before 2.2(5a), and 3.0 before 3.0(2e) allows remote attackers to execute arbitrary shell commands via a crafted HTTP request, aka Bug ID CSCur90888.
A vulnerability in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient user input validation. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device using root-level privileges. Due to the nature of the vulnerability, only commands without parameters can be executed.
Multiple vulnerabilities in the web-based management interface of the Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an attacker to do the following: Execute arbitrary code Cause a denial of service (DoS) condition Execute arbitrary commands For more information about these vulnerabilities, see the Details section of this advisory.
The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote attackers to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31640.
The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows Network Processor (NP) Linux users to obtain root access to the Application Processor (AP) Linux system via shell metacharacters in commands.
Cisco UCS Central Software before 1.3(1a) allows remote attackers to execute arbitrary commands via a crafted HTTP request, aka Bug ID CSCut46961.
The management interface in Cisco TelePresence Video Communication Server (VCS) and Cisco Expressway before X7.2.4, X8 before X8.1.2, and X8.2 before X8.2.2 and Cisco TelePresence Conductor before X2.3.1 and XC2.4 before XC2.4.1 allows remote attackers to bypass authentication via crafted login parameters, aka Bug IDs CSCur02680 and CSCur05556.
A vulnerability in the REST API of Cisco IoT Field Network Director (FND) could allow an unauthenticated, remote attacker to access the back-end database of an affected system. The vulnerability exists because the affected software does not properly authenticate REST API calls. An attacker could exploit this vulnerability by obtaining a cross-site request forgery (CSRF) token and then using the token with REST API requests. A successful exploit could allow the attacker to access the back-end database of the affected device and read, alter, or drop information.
A vulnerability in the REST API of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability exists because different installations share a static encryption key. An attacker could exploit this vulnerability by using the static key to craft a valid session token. A successful exploit could allow the attacker to perform arbitrary actions through the REST API with administrative privileges.
Multiple vulnerabilities in the API subsystem of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to execute arbitrary code with root privileges. The vulnerabilities are due to improper boundary checks for certain user-supplied input. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the API subsystem of an affected system. When this request is processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying operating system (OS).
Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the authorization controls for the Cisco IOx application hosting infrastructure in Cisco IOS XE Software could allow an unauthenticated, remote attacker to execute Cisco IOx API commands without proper authorization. The vulnerability is due to incorrect handling of requests for authorization tokens. An attacker could exploit this vulnerability by using a crafted API call to request such a token. An exploit could allow the attacker to obtain an authorization token and execute any of the IOx API commands on an affected device.
The web server on Cisco DPC3010, DPC3212, DPC3825, DPC3925, DPQ3925, EPC3010, EPC3212, EPC3825, and EPC3925 Wireless Residential Gateway products allows remote attackers to execute arbitrary code via a crafted HTTP request, aka Bug ID CSCup40808.
Cisco Unified Communications Domain Manager (CDM) in Unified CDM Platform Software before 4.4.2 has a hardcoded SSH private key, which makes it easier for remote attackers to obtain access to the support and root accounts by extracting this key from a binary file found in a different installation of the product, aka Bug ID CSCud41130.
The web interface in Cisco Secure Access Control System (ACS) 5.x before 5.4 Patch 3 allows remote attackers to execute arbitrary operating-system commands via a request to this interface, aka Bug ID CSCue65962.
Multiple buffer overflows in securecgi-bin/CSuserCGI.exe in User-Changeable Password (UCP) before 4.2 in Cisco Secure Access Control Server (ACS) for Windows and ACS Solution Engine allow remote attackers to execute arbitrary code via a long argument located immediately after the Logout argument, and possibly unspecified other vectors.
The web management interface on the Cisco RV110W firewall with firmware 1.2.0.9 and earlier, RV215W router with firmware 1.1.0.5 and earlier, and CVR100W router with firmware 1.0.1.19 and earlier does not prevent replaying of modified authentication requests, which allows remote attackers to obtain administrative access by leveraging the ability to intercept requests, aka Bug IDs CSCul94527, CSCum86264, and CSCum86275.
A vulnerability in the Transaction Language 1 (TL1) code of Cisco ASR 900 Series routers could allow an unauthenticated, remote attacker to cause a reload of, or remotely execute code on, the affected system. This vulnerability affects Cisco ASR 900 Series Aggregation Services Routers (ASR902, ASR903, and ASR907) that are running the following releases of Cisco IOS XE Software: 3.17.0S 3.17.1S 3.17.2S 3.18.0S 3.18.1S. More Information: CSCuy15175. Known Affected Releases: 15.6(1)S 15.6(2)S. Known Fixed Releases: 15.6(1)S2.12 15.6(1.17)S0.41 15.6(1.17)SP 15.6(2)SP 16.4(0.183) 16.5(0.10).
A vulnerability in the interdevice communications interface of the Cisco IP Interoperability and Collaboration System (IPICS) Universal Media Services (UMS) could allow an unauthenticated, remote attacker to modify configuration parameters of the UMS and cause the system to become unavailable. Affected Products: This vulnerability affects Cisco IPICS releases 4.8(1) to 4.10(1). More Information: CSCva46644. Known Affected Releases: 4.10(1) 4.8(1) 4.8(2) 4.9(1) 4.9(2).
Buffer overflow in Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SCCP and SIP firmware might allow remote attackers to execute arbitrary code via a crafted DNS response.