Multiple buffer overflows in the (1) SNMP and (2) License Manager implementations in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allow remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54830.

The HTTP Profiling functionality on Cisco Wireless LAN Controller (WLC) devices with software 7.3.101.0 allows remote authenticated users to execute arbitrary code via a crafted HTTP User-Agent header, aka Bug ID CSCuc15636.

A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.

A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.

A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker to log in to the device with the privileges of the root user, aka an Insecure Default Account Information Vulnerability. More Information: CSCvd85710. Known Affected Releases: 21.0.v0.65839.

A vulnerability in Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the Linux root user, aka an Insecure Default Password Vulnerability. More Information: CSCvc76631. Known Affected Releases: 2.2(9.76).

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE 16.2 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incorrect default permission settings for new users who are created by using the web UI of the affected software. An attacker could exploit this vulnerability by using the web UI of the affected software to create a new user and then logging into the web UI as the newly created user. A successful exploit could allow the attacker to elevate their privileges on the affected device. This vulnerability affects Cisco devices that are running a vulnerable release Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuy83062.

A vulnerability in the Traversal Using Relay NAT (TURN) server included with Cisco Meeting Server (CMS) could allow an authenticated, remote attacker to gain unauthenticated or unauthorized access to components of or sensitive information in an affected system. The vulnerability is due to an incorrect default configuration of the TURN server, which could expose internal interfaces and ports on the external interface of an affected system. An attacker could exploit this vulnerability by using a TURN server to perform an unauthorized connection to a Call Bridge, a Web Bridge, or a database cluster in an affected system, depending on the deployment model and CMS services in use. A successful exploit could allow the attacker to gain unauthenticated access to a Call Bridge or database cluster in an affected system or gain unauthorized access to sensitive meeting information in an affected system. To exploit this vulnerability, the attacker must have valid credentials for the TURN server of the affected system. This vulnerability affects Cisco Meeting Server (CMS) deployments that are running a CMS Software release prior to Release 2.0.16, 2.1.11, or 2.2.6. Cisco Bug IDs: CSCvf51127.

The administrative web interface on Cisco TelePresence Immersive Endpoint Devices before 1.7.4 allows remote authenticated users to execute arbitrary commands via a malformed request on TCP port 443, aka Bug ID CSCtn99724.

The server in Cisco Unity Connection 9.1(1) and 9.1(2) allows remote authenticated users to obtain privileged access by conducting an "HTTP Intercept" attack and leveraging the ability to read files within the context of the web-server user account, aka Bug ID CSCup41014.

Cisco Unity Connection before 7.1.3b(Su2) allows remote authenticated users to change the administrative password by leveraging the Help Desk Administrator role, aka Bug ID CSCtd45141.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS before 3.1.2S, 3.2.xS through 3.4.xS before 3.4.2S, 3.5.xS before 3.5.1S, and 3.1.xSG and 3.2.xSG before 3.2.2SG, when AAA authorization is enabled, allow remote authenticated users to bypass intended access restrictions and execute commands via a (1) HTTP or (2) HTTPS session, aka Bug ID CSCtr91106.

The web interface on Cisco SRP 520 series devices with firmware before 1.1.26 and SRP 520W-U and 540 series devices with firmware before 1.2.4 allows remote authenticated users to execute arbitrary commands via unspecified vectors, related to a "command injection vulnerability," aka Bug ID CSCtt46871.

Cisco Digital Media Manager 5.2.2 and earlier, and 5.2.3, allows remote authenticated users to execute arbitrary code via vectors involving a URL and an administrative resource, aka Bug ID CSCts63878.

Unspecified vulnerability in Cisco Unified Intelligent Contact Management Enterprise (ICME), Unified ICM Hosted (ICMH), Unified Contact Center Enterprise (UCCE), Unified Contact Center Hosted (UCCH), and System Unified Contact Center Enterprise (SUCCE) 7.1(5) allows remote authenticated users to gain privileges, and read reports or change the SUCCE configuration, via certain web interfaces, aka CSCsj55686.

The Cisco Video Surveillance IP Gateway Encoder/Decoder (Standalone and Module) firmware 1.8.1 and earlier, Video Surveillance SP/ISP Decoder Software firmware 1.11.0 and earlier, and the Video Surveillance SP/ISP firmware 1.23.7 and earlier have default passwords for the sypixx and root user accounts, which allows remote attackers to perform administrative actions, aka CSCsj34681.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.

Unspecified vulnerability in Cisco Wireless Control System (WCS) before 4.0.87.0 allows remote authenticated users to gain the privileges of the SuperUsers group, and manage the application and its networks, related to the group membership of user accounts, aka Bug ID CSCsg05190.

Unspecified vulnerability in Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to use the LOCAL authentication method, allows remote authenticated users to gain privileges via unspecified vectors.

Unspecified vulnerability in Cisco Firewall Services Module (FWSM) before 2.3(4.7) and 3.x before 3.1(3.1) causes the access control entries (ACE) in an ACL to be improperly evaluated, which allows remote authenticated users to bypass intended certain ACL protections.

A vulnerability in the web-based management interface of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with read-write privileges on the application to perform a command injection attack that could result in remote code execution on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to establish a remote shell with root privileges.

A vulnerability in Cisco Secure Network Analytics could allow an authenticated, remote attacker to execute arbitrary code as a root user on an affected device. This vulnerability is due to insufficient validation of user input to the web interface. An attacker could exploit this vulnerability by uploading a crafted file to an affected device. A successful exploit could allow the attacker to execute code on the affected device. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the session management system of the Cisco Catalyst SD-WAN Manager multi-tenant feature could allow an authenticated, remote attacker to access another tenant that is being managed by the same Cisco Catalyst SD-WAN Manager instance. This vulnerability requires the multi-tenant feature to be enabled. This vulnerability is due to insufficient user session management within the Cisco Catalyst SD-WAN Manager system. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain unauthorized access to information about another tenant, make configuration changes, or possibly take a tenant offline causing a denial of service condition.

A vulnerability in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320 and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. This vulnerability is due to improper validation of user input within incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface. A successful exploit could allow the attacker to gain root-level privileges and access unauthorized data. To exploit this vulnerability, an attacker would need to have valid administrative credentials on the affected device.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. This vulnerability is due to improper processing of serialized Java objects by the affected application. An attacker could exploit this vulnerability by uploading a document containing malicious serialized Java objects to be processed by the affected application. A successful exploit could allow the attacker to cause the application to execute arbitrary commands.

A vulnerability in the Cisco IOx application hosting environment could allow an authenticated, remote attacker to execute arbitrary commands as root on the underlying host operating system. This vulnerability is due to incomplete sanitization of parameters that are passed in for activation of an application. An attacker could exploit this vulnerability by deploying and activating an application in the Cisco IOx application hosting environment with a crafted activation payload file. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying host operating system.

A vulnerability in the web-based management interface of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code or cause the web-based management process on the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The attacker must have valid administrator credentials. This vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the web-based management process to restart, resulting in a DoS condition.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.

Two vulnerabilities in Cisco ISE could allow an authenticated, remote attacker to upload arbitrary files to an affected device. To exploit these vulnerabilities, an attacker must have valid Administrator credentials on the affected device. These vulnerabilities are due to improper validation of files that are uploaded to the web-based management interface. An attacker could exploit these vulnerabilities by uploading a crafted file to an affected device. A successful exploit could allow the attacker to store malicious files in specific directories on the device. The attacker could later use those files to conduct additional attacks, including executing arbitrary code on the affected device with root privileges.

A vulnerability in the web-based management interface of Cisco Small Business RV160 and RV260 Series VPN Routers could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on the affected device. To exploit this vulnerability, the attacker must have valid Administrator-level credentials on the affected device.

A vulnerability in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. This vulnerability is due to improper validation of user input within incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface. A successful exploit could allow the attacker to gain root-level privileges and access unauthorized data. To exploit this vulnerability, an attacker would need to have valid administrative credentials on the affected device. Cisco has not released software updates that address this vulnerability.

A vulnerability in the image verification function of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to execute code with internal user privileges on the underlying operating system. The vulnerability is due to insufficient validation of the content of upgrade packages. An attacker could exploit this vulnerability by uploading a malicious archive to the Upgrade page of the administrative web interface. A successful exploit could allow the attacker to execute code with user-level privileges (the _nobody account) on the underlying operating system.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an authenticated, remote attacker to execute arbitrary commands on the underlying Linux shell as the root user. Exploitation of this vulnerability requires privileged access to an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by logging in to the web-based management interface with administrator privileges and then sending a malicious request to a certain part of the interface.

Multiple vulnerabilities in Cisco BroadWorks CommPilot Application Software could allow an authenticated, remote attacker to delete arbitrary user accounts or gain elevated privileges on an affected system.

A vulnerability in the Web Services Management Agent (WSMA) function of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary Cisco IOS commands as a privilege level 15 user. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker could exploit this vulnerability by submitting crafted HTTP requests to the targeted application. A successful exploit could allow the attacker to execute arbitrary commands on the affected device.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated but unprivileged (level 1), remote attacker to run privileged Cisco IOS commands by using the web UI. The vulnerability is due to a failure to validate and sanitize input in Web Services Management Agent (WSMA) functions. An attacker could exploit this vulnerability by submitting a malicious payload to the affected device's web UI. A successful exploit could allow the lower-privileged attacker to execute arbitrary commands with higher privileges on the affected device.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by invoking an interface monitoring mechanism with a crafted argument on the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.