A vulnerability in the normalization functionality of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to insufficient normalization of a text-based payload. An attacker could exploit this vulnerability by sending traffic that contains specifically obfuscated payloads through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious payloads to protected systems that would otherwise be blocked.

A vulnerability in the Security Assertion Markup Language (SAML) APIs of Cisco Catalyst SD-WAN Manager Software could allow an unauthenticated, remote attacker to gain unauthorized access to the application as an arbitrary user. This vulnerability is due to improper authentication checks for SAML APIs. An attacker could exploit this vulnerability by sending requests directly to the SAML API. A successful exploit could allow the attacker to generate an authorization token sufficient to gain access to the application.

A vulnerability in the scanning engines of Cisco AsyncOS Software for Cisco Secure Web Appliance could allow an unauthenticated, remote attacker to bypass a configured rule, allowing traffic onto a network that should have been blocked. This vulnerability is due to improper detection of malicious traffic when the traffic is encoded with a specific content format. An attacker could exploit this vulnerability by using an affected device to connect to a malicious server and receiving crafted HTTP responses. A successful exploit could allow the attacker to bypass an explicit block rule and receive traffic that should have been rejected by the device.

A vulnerability in the “plug-and-play” services component of Cisco Industrial Network Director (IND) could allow an unauthenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to improper access restrictions on the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to access running configuration information about devices managed by the IND, including administrative credentials.

Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not support the "fragment" keyword in an outgoing ACL, which could allow fragmented packets in violation of the intended access.

A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to perform a command injection attack and execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation by the web portal framework. An attacker could exploit this vulnerability by providing malicious input during web portal authentication. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the classic access control list (ACL) compression feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to incorrect destination address range encoding in the compression module of an ACL that is applied to an interface of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. There are workarounds that address this vulnerability. This advisory is part of the September 2023 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2023 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication .

Multiple vulnerabilities in the web-based management interface of certain Cisco IP Phones could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco Common Services Platform Collector (CSPC) could allow an unauthenticated, remote attacker to access an affected device by using an account that has a default, static password. This account does not have administrator privileges. The vulnerability exists because the affected software has a user account with a default, static password. An attacker could exploit this vulnerability by remotely connecting to the affected system using this account. A successful exploit could allow the attacker to log in to the CSPC using the default account. For Cisco CSPC 2.7.x, Cisco fixed this vulnerability in Release 2.7.4.6. For Cisco CSPC 2.8.x, Cisco fixed this vulnerability in Release 2.8.1.2.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper handling of Lightweight Directory Access Protocol (LDAP) authentication responses from an external authentication server. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to gain administrative access to the web-based management interface of the affected device.

A vulnerability in the REST API of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network Manager (EPNM) could allow an unauthenticated remote attacker to execute arbitrary code with root privileges on the underlying operating system. The vulnerability is due to insufficient input validation during the initial High Availability (HA) configuration and registration process of an affected device. An attacker could exploit this vulnerability by uploading a malicious file during the HA registration period. A successful exploit could allow the attacker to execute arbitrary code with root-level privileges on the underlying operating system. Note: This vulnerability can only be exploited during the HA registration period. See the Details section for more information.

Cisco Aironet 340 Series wireless bridge before 8.55 does not properly disable access to the web interface, which allows remote attackers to modify its configuration.

Cisco Virtual Central Office 4000 (VCO/4K) uses weak encryption to store usernames and passwords in the SNMP MIB, which allows an attacker who knows the community name to crack the password and gain privileges.

Multiple vulnerabilities in the authentication mechanisms of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco routers 9.17 and earlier allow remote attackers to bypass security restrictions via certain IP source routed packets that should normally be denied using the "no ip source-route" command.

The mailguard feature in Cisco Secure PIX Firewall 5.2(2) and earlier does not properly restrict access to SMTP commands, which allows remote attackers to execute restricted commands by sending a DATA command before sending the restricted commands.

Cisco Carrier Routing System (CRS) 3.9, 4.0, and 4.1 allows remote attackers to bypass ACL entries via fragmented packets, aka Bug ID CSCtj10975.

Cisco 675 routers running CBOS allow remote attackers to establish telnet sessions if an exec or superuser password has not been set.

Cisco Catalyst 2900 Virtual LAN (VLAN) switches allow remote attackers to inject 802.1q frames into another VLAN by forging the VLAN identifier in the trunking tag.

Cisco PIX Private Link 4.1.6 and earlier does not properly process certain commands in the configuration file, which reduces the effective key length of the DES key to 48 bits instead of 56 bits, which makes it easier for an attacker to find the proper key via a brute force attack.

Web Cache Control Protocol (WCCP) in Cisco Cache Engine for Cisco IOS 11.2 and earlier does not use authentication, which allows remote attackers to redirect HTTP traffic to arbitrary hosts via WCCP packets to UDP port 2048.

Cisco IOS 9.1 and earlier does not properly handle extended IP access lists when the IP route cache is enabled and the "established" keyword is set, which could allow attackers to bypass filters.

Some classic Cisco IOS devices have a vulnerability in the PPP CHAP authentication to establish unauthorized PPP connections.

In Cisco IOS 10.3, with the tacacs-ds or tacacs keyword, an extended IP access control list could bypass filtering.

AAA authentication on Cisco systems allows attackers to execute commands without authorization.

Multiple vulnerabilities in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. These vulnerabilities are due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit these vulnerabilities by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should be activated for the ENIP packet.

A vulnerability in the Universal Plug-and-Play (UPnP) service of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of incoming UPnP traffic. An attacker could exploit this vulnerability by sending a crafted UPnP request to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a DoS condition. Cisco has not released software updates that address this vulnerability.

Cisco IOS Firewall Feature set, aka Context Based Access Control (CBAC) or Cisco Secure Integrated Software, for IOS 11.2P through 12.2T does not properly check the IP protocol type, which could allow remote attackers to bypass access control lists.

Buffer overflow in the redirection functionality in Cisco Wireless LAN Controller (WLC) Software 7.2 through 7.4 before 7.4.140.0(MD) and 7.5 through 8.0 before 8.0.115.0(ED) allows remote attackers to execute arbitrary code via a crafted HTTP request, aka Bug ID CSCus25617.

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuy21882.

Cisco Firepower System Software 6.0.0 through 6.1.0 has a hardcoded account, which allows remote attackers to obtain CLI access by leveraging knowledge of the password, aka Bug ID CSCuz56238.

Buffer overflow in the Overlay Transport Virtualization (OTV) GRE feature in Cisco NX-OS 5.0 through 7.3 on Nexus 7000 and 7700 devices allows remote attackers to execute arbitrary code via long parameters in a packet header, aka Bug ID CSCuy95701.

A vulnerability in Server Name Identification (SNI) request filtering of Cisco Web Security Appliance (WSA), Cisco Firepower Threat Defense (FTD), and the Snort detection engine could allow an unauthenticated, remote attacker to bypass filtering technology on an affected device and exfiltrate data from a compromised host. This vulnerability is due to inadequate filtering of the SSL handshake. An attacker could exploit this vulnerability by using data from the SSL client hello packet to communicate with an external server. A successful exploit could allow the attacker to execute a command-and-control attack on a compromised host and perform additional data exfiltration attacks.

A vulnerability in the TACACS+ authentication, authorization and accounting (AAA) feature of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to bypass authentication and log in to an affected device as an administrator. This vulnerability is due to incomplete validation of user-supplied input that is passed to an authentication script. An attacker could exploit this vulnerability by injecting parameters into an authentication request. A successful exploit could allow the attacker to bypass authentication and log in as an administrator to the affected device.

Cisco TelePresence Recording Server devices with software 1.6.x do not require authentication for an XML-RPC interface, which allows remote attackers to perform unspecified actions via a session on TCP port 8080, aka Bug ID CSCtg35833.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

A vulnerability in the file and malware inspection feature of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass the file and malware inspection policies on an affected system. The vulnerability exists because the affected software insufficiently validates incoming traffic. An attacker could exploit this vulnerability by sending a crafted HTTP request through an affected device. A successful exploit could allow the attacker to bypass the file and malware inspection policies and send malicious traffic through the affected device.

On Feb 15, 2023, the following vulnerability in the ClamAV scanning library was disclosed: A vulnerability in the HFS+ partition file parser of ClamAV versions 1.0.0 and earlier, 0.105.1 and earlier, and 0.103.7 and earlier could allow an unauthenticated, remote attacker to execute arbitrary code. This vulnerability is due to a missing buffer size check that may result in a heap buffer overflow write. An attacker could exploit this vulnerability by submitting a crafted HFS+ partition file to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the ClamAV scanning process, or else crash the process, resulting in a denial of service (DoS) condition. For a description of this vulnerability, see the ClamAV blog ["https://blog.clamav.net/"].

A vulnerability in the web-based management interface of Cisco Unified Intelligence Center could allow an unauthenticated, remote attacker to conduct a server-side request forgery (SSRF) attack through an affected device. This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to send arbitrary network requests that are sourced from the affected device.

A vulnerability in the hybrid access control list (ACL) processing of IPv4 packets in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect handling of packets when a specific configuration of the hybrid ACL exists. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass a configured ACL on the affected device. For more information, see the section of this advisory. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.

A vulnerability in the PDF scanning processes of ClamAV could allow an unauthenticated, remote attacker to cause a buffer overflow condition, cause a denial of service (DoS) condition, or execute arbitrary code on an affected device. This vulnerability exists because memory buffers are allocated incorrectly when PDF files are processed. An attacker could exploit this vulnerability by submitting a crafted PDF file to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to trigger a buffer overflow, likely resulting in the termination of the ClamAV scanning process and a DoS condition on the affected software. Although unproven, there is also a possibility that an attacker could leverage the buffer overflow to execute arbitrary code with the privileges of the ClamAV process.