Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.

A vulnerability in the CLI parser of Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected ASA FirePOWER module as the root user. This vulnerability is due to improper handling of undefined command parameters. An attacker could exploit this vulnerability by using a crafted command on the CLI or by submitting a crafted HTTPS request to the web-based management interface of the Cisco ASA that is hosting the ASA FirePOWER module. Note: To exploit this vulnerability, the attacker must have administrative access to the Cisco ASA. A user who has administrative access to a particular Cisco ASA is also expected to have administrative access to the ASA FirePOWER module that is hosted by that Cisco ASA.

A vulnerability in the Localdisk Management feature of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to make unauthorized changes to the file system of an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted HTTP request with absolute path sequences. A successful exploit could allow the attacker to upload malicious files to arbitrary locations within the file system. Using this method, it is possible to access the underlying operating system and execute commands with system privileges.

A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, but unprivileged, remote attacker to elevate privileges to level 15. This vulnerability is due to improper separation of authentication and authorization scopes. An attacker could exploit this vulnerability by sending crafted HTTPS messages to the web services interface of an affected device. A successful exploit could allow the attacker to gain privilege level 15 access to the web management interface of the device. This includes privilege level 15 access to the device using management tools like the Cisco Adaptive Security Device Manager (ASDM) or the Cisco Security Manager (CSM). Note: With Cisco FTD Software, the impact is lower than the CVSS score suggests because the affected web management interface allows for read access only.

A vulnerability in the web management interface of Cisco AsyncOS for Cisco Secure Web Appliance, formerly Cisco Web Security Appliance (WSA), could allow an authenticated, remote attacker to perform a command injection and elevate privileges to root. This vulnerability is due to insufficient validation of user-supplied input for the web interface. An attacker could exploit this vulnerability by authenticating to the system and sending a crafted HTTP packet to the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system and elevate privileges to root. To successfully exploit this vulnerability, an attacker would need at least read-only credentials.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.Attention: Simplifying the Cisco portfolio includes the renaming of security products under one brand: Cisco Secure. For more information, see .

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the API implementation of Cisco ACI Multi-Site Orchestrator (MSO) could allow an authenticated, remote attacker to elevate privileges on an affected device. This vulnerability is due to improper authorization on specific APIs. An attacker could exploit this vulnerability by sending crafted HTTP requests. A successful exploit could allow an attacker who is authenticated with non-Administrator privileges to elevate to Administrator privileges on an affected device.

A vulnerability in the packaging of Cisco Adaptive Security Device Manager (ASDM) images and the validation of those images by Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker with administrative privileges to upload an ASDM image that contains malicious code to a device that is running Cisco ASA Software. This vulnerability is due to insufficient validation of the authenticity of an ASDM image during its installation on a device that is running Cisco ASA Software. An attacker could exploit this vulnerability by installing a crafted ASDM image on the device that is running Cisco ASA Software and then waiting for a targeted user to access that device using ASDM. A successful exploit could allow the attacker to execute arbitrary code on the machine of the targeted user with the privileges of that user on that machine. Notes: To successfully exploit this vulnerability, the attacker must have administrative privileges on the device that is running Cisco ASA Software. Potential targets are limited to users who manage the same device that is running Cisco ASA Software using ASDM. Cisco has released and will release software updates that address this vulnerability.

The RMI interface in Cisco Secure Access Control System (ACS) 5.x before 5.5 does not properly enforce authorization requirements, which allows remote authenticated users to obtain superadmin access via a request to this interface, aka Bug ID CSCud75180.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco Identity Services Engine could allow an authenticated, remote attacker to inject arbitrary commands on the underlying operating system. This vulnerability is due to improper validation of user input within requests as part of the web-based management interface. An attacker could exploit this vulnerability by manipulating requests to the web-based management interface to contain operating system commands. A successful exploit could allow the attacker to execute arbitrary operating system commands on the underlying operating system with the privileges of the web services user. Cisco has not yet released software updates that address this vulnerability.

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to bypass authorization and access system files. This vulnerability is due to improper access control in the web-based management interface of an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to list, download, and delete certain files that they should not have access to. Cisco plans to release software updates that address this vulnerability. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-access-contol-EeufSUCx ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-access-contol-EeufSUCx"]

The web framework in Cisco Identity Services Engine (ISE) 1.0 and 1.1.0 before 1.1.0.665-5, 1.1.1 before 1.1.1.268-7, 1.1.2 before 1.1.2.145-10, 1.1.3 before 1.1.3.124-7, 1.1.4 before 1.1.4.218-7, and 1.2 before 1.2.0.899-2 allows remote authenticated users to execute arbitrary commands via a crafted session on TCP port 443, aka Bug ID CSCuh81511.

The web framework in IronPort AsyncOS on Cisco Web Security Appliance devices before 7.1.3-013, 7.5 before 7.5.0-838, and 7.7 before 7.7.0-550; Email Security Appliance devices before 7.1.5-104, 7.3 before 7.3.2-026, 7.5 before 7.5.2-203, and 7.6 before 7.6.3-019; and Content Security Management Appliance devices before 7.2.2-110, 7.7 before 7.7.0-213, and 7.8 and 7.9 before 7.9.1-102 allows remote authenticated users to execute arbitrary commands via crafted command-line input in a URL, aka Bug IDs CSCzv85726, CSCzv44633, and CSCzv24579.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of command input by the affected software. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

The web framework in IronPort AsyncOS on Cisco Web Security Appliance devices before 7.1.3-013, 7.5 before 7.5.0-838, and 7.7 before 7.7.0-550 allows remote authenticated users to execute arbitrary commands via crafted command-line input in a URL sent over IPv4, aka Bug ID CSCzv69294.

The web framework in Cisco WAAS Software before 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1; Cisco ACNS Software 4.x and 5.x before 5.5.29.2; Cisco ECDS Software 2.x before 2.5.6; Cisco CDS-IS Software 2.x before 2.6.3.b50 and 3.1.x before 3.1.2b54; Cisco VDS-IS Software 3.2.x before 3.2.1.b9; Cisco VDS-SB Software 1.x before 1.1.0-b96; Cisco VDS-OE Software 1.x before 1.0.1; and Cisco VDS-OS Software 1.x in central-management mode allows remote authenticated users to execute arbitrary commands by appending crafted strings to values in GUI fields, aka Bug IDs CSCug40609, CSCug48855, CSCug48921, CSCug48872, CSCuh21103, CSCuh21020, and CSCug56790.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to gain elevated privileges on an affected device. The vulnerability exists because the affected software does not reset the privilege level for each web UI session. An attacker who has valid credentials for an affected device could exploit this vulnerability by remotely accessing a VTY line to the device. A successful exploit could allow the attacker to access an affected device with the privileges of the user who previously logged in to the web UI. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled and authentication, authorization, and accounting (AAA) authorization is not configured for EXEC sessions. The default state of the HTTP Server feature is version-dependent. This vulnerability was introduced in Cisco IOS XE Software Release 16.1.1. Cisco Bug IDs: CSCvf71769.

A vulnerability in the error reporting feature of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to gain elevated privileges on an affected device. The vulnerability is due to a failure to properly validate certain parameters included within the error reporting application configuration. An attacker could exploit this vulnerability by sending a crafted command to the error reporting feature. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device.

A vulnerability in the process of uploading new application images to Cisco FXOS on the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker using path traversal techniques to create or overwrite arbitrary files on an affected device. The vulnerability is due to insufficient validation during the application image upload process. An attacker could exploit this vulnerability by creating an application image containing malicious code and installing the image on the affected device using the CLI or web-based user interface (web UI). These actions occur prior to signature verification and could allow the attacker to create and execute arbitrary code with root privileges. Note: A missing or invalid signature in the application image will cause the upload process to fail, but does not prevent the exploit. Cisco Bug IDs: CSCvc21901.

A vulnerability in the web interface of Cisco Data Center Network Manager could allow an authenticated application administrator to execute commands on the underlying operating system with root-level privileges. The vulnerability is due to incomplete input validation of user input within an HTTP request. An attacker could exploit this vulnerability by authenticating to the application and then sending a crafted HTTP request to the targeted application. A successful exploit could allow the authenticated attacker to issue commands on the underlying operating system as the root user.

Cisco Wireless LAN Controller (WLC) devices with software 7.0 before 7.0.235.3, 7.1 and 7.2 before 7.2.111.3, and 7.3 before 7.3.101.0 allow remote authenticated users to bypass wireless-management settings and read or modify the device configuration via an SNMP request, aka Bug ID CSCua60653.

Unspecified vulnerability in Cisco Unified Customer Voice Portal (CVP) 4.0.x before 4.0(2)_ES14, 4.1.x before 4.1(1)_ES11, and 7.x before 7.0(1) allows remote authenticated users with administrator role privileges to create, modify, or delete a superuser account.

Buffer overflow in the SNMP implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allows remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54822.

Multiple buffer overflows in the (1) SNMP and (2) License Manager implementations in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allow remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54830.

The HTTP Profiling functionality on Cisco Wireless LAN Controller (WLC) devices with software 7.3.101.0 allows remote authenticated users to execute arbitrary code via a crafted HTTP User-Agent header, aka Bug ID CSCuc15636.

A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.

A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.

A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker to log in to the device with the privileges of the root user, aka an Insecure Default Account Information Vulnerability. More Information: CSCvd85710. Known Affected Releases: 21.0.v0.65839.

A vulnerability in Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the Linux root user, aka an Insecure Default Password Vulnerability. More Information: CSCvc76631. Known Affected Releases: 2.2(9.76).

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE 16.2 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incorrect default permission settings for new users who are created by using the web UI of the affected software. An attacker could exploit this vulnerability by using the web UI of the affected software to create a new user and then logging into the web UI as the newly created user. A successful exploit could allow the attacker to elevate their privileges on the affected device. This vulnerability affects Cisco devices that are running a vulnerable release Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuy83062.

A vulnerability in the Traversal Using Relay NAT (TURN) server included with Cisco Meeting Server (CMS) could allow an authenticated, remote attacker to gain unauthenticated or unauthorized access to components of or sensitive information in an affected system. The vulnerability is due to an incorrect default configuration of the TURN server, which could expose internal interfaces and ports on the external interface of an affected system. An attacker could exploit this vulnerability by using a TURN server to perform an unauthorized connection to a Call Bridge, a Web Bridge, or a database cluster in an affected system, depending on the deployment model and CMS services in use. A successful exploit could allow the attacker to gain unauthenticated access to a Call Bridge or database cluster in an affected system or gain unauthorized access to sensitive meeting information in an affected system. To exploit this vulnerability, the attacker must have valid credentials for the TURN server of the affected system. This vulnerability affects Cisco Meeting Server (CMS) deployments that are running a CMS Software release prior to Release 2.0.16, 2.1.11, or 2.2.6. Cisco Bug IDs: CSCvf51127.

The administrative web interface on Cisco TelePresence Immersive Endpoint Devices before 1.7.4 allows remote authenticated users to execute arbitrary commands via a malformed request on TCP port 443, aka Bug ID CSCtn99724.

The server in Cisco Unity Connection 9.1(1) and 9.1(2) allows remote authenticated users to obtain privileged access by conducting an "HTTP Intercept" attack and leveraging the ability to read files within the context of the web-server user account, aka Bug ID CSCup41014.

Cisco Unity Connection before 7.1.3b(Su2) allows remote authenticated users to change the administrative password by leveraging the Help Desk Administrator role, aka Bug ID CSCtd45141.

The web interface on Cisco SRP 520 series devices with firmware before 1.1.26 and SRP 520W-U and 540 series devices with firmware before 1.2.4 allows remote authenticated users to execute arbitrary commands via unspecified vectors, related to a "command injection vulnerability," aka Bug ID CSCtt46871.

Cisco Digital Media Manager 5.2.2 and earlier, and 5.2.3, allows remote authenticated users to execute arbitrary code via vectors involving a URL and an administrative resource, aka Bug ID CSCts63878.

Unspecified vulnerability in Cisco Unified Intelligent Contact Management Enterprise (ICME), Unified ICM Hosted (ICMH), Unified Contact Center Enterprise (UCCE), Unified Contact Center Hosted (UCCH), and System Unified Contact Center Enterprise (SUCCE) 7.1(5) allows remote authenticated users to gain privileges, and read reports or change the SUCCE configuration, via certain web interfaces, aka CSCsj55686.

The Cisco Video Surveillance IP Gateway Encoder/Decoder (Standalone and Module) firmware 1.8.1 and earlier, Video Surveillance SP/ISP Decoder Software firmware 1.11.0 and earlier, and the Video Surveillance SP/ISP firmware 1.23.7 and earlier have default passwords for the sypixx and root user accounts, which allows remote attackers to perform administrative actions, aka CSCsj34681.

A vulnerability in the web-based management interface of Cisco Email Security Appliance, Cisco Secure Email and Web Manager and Cisco Secure Web Appliance could allow an authenticated, remote attacker to elevate privileges on an affected system. The attacker needs valid credentials to exploit this vulnerability. This vulnerability is due to the use of a hardcoded value to encrypt a token used for certain APIs calls . An attacker could exploit this vulnerability by authenticating to the device and sending a crafted HTTP request. A successful exploit could allow the attacker to impersonate another valid user and execute commands with the privileges of that user account.

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.

Unspecified vulnerability in Cisco Wireless Control System (WCS) before 4.0.87.0 allows remote authenticated users to gain the privileges of the SuperUsers group, and manage the application and its networks, related to the group membership of user accounts, aka Bug ID CSCsg05190.

Unspecified vulnerability in Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to use the LOCAL authentication method, allows remote authenticated users to gain privileges via unspecified vectors.

Unspecified vulnerability in Cisco Firewall Services Module (FWSM) before 2.3(4.7) and 3.x before 3.1(3.1) causes the access control entries (ACE) in an ACL to be improperly evaluated, which allows remote authenticated users to bypass intended certain ACL protections.