A vulnerability in the Multi-Pod or Multi-Site network configurations for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to unexpectedly restart the device, resulting in a denial of service (DoS) condition. This vulnerability exists because TCP traffic sent to a specific port on an affected device is not properly sanitized. An attacker could exploit this vulnerability by sending crafted TCP data to a specific port that is listening on a public-facing IP address for the Multi-Pod or Multi-Site configuration. A successful exploit could allow the attacker to cause the device to restart unexpectedly, resulting in a DoS condition.

The web management interface for Cisco Content Service Switch (CSS) 11000 switches allows remote attackers to cause a denial of service (soft reset) via (1) an HTTPS POST request, or (2) malformed XML data.

Cisco Virtual Private Network (VPN) Client 3.5.4 and earlier allows remote attackers to cause a denial of service (CPU consumption) via a packet with a zero-length payload.

Buffer overflows in Cisco Virtual Private Network (VPN) Client 3.5.4 and earlier allows remote attackers to cause a denial of service via (1) an Internet Key Exchange (IKE) with a large Security Parameter Index (SPI) payload, or (2) an IKE packet with a large number of valid payloads.

Cisco 600 series routers running CBOS 2.0.1 through 2.4.2ap allows remote attackers to cause a denial of service via multiple connections to the router on the (1) HTTP or (2) telnet service, which causes the router to become unresponsive and stop forwarding packets.

Cisco routers and switches running IOS 12.0 through 12.2.1 allows a remote attacker to cause a denial of service via a flood of UDP packets.

Cisco IOS 12.2 and earlier running Cisco Discovery Protocol (CDP) allows remote attackers to cause a denial of service (memory consumption) via a flood of CDP neighbor announcements.

Cisco CBOS 2.3.8 and earlier allows remote attackers to cause a denial of service via an ICMP ECHO REQUEST (ping) with the IP Record Route option set.

Web-based configuration utility in Cisco 600 series routers running CBOS 2.0.1 through 2.4.2ap binds itself to port 80 even when web-based configuration services are disabled, which could leave the router open to attack.

Cisco Catalyst 5000 series switches 6.1(2) and earlier will forward an 802.1x frame on a Spanning Tree Protocol (STP) blocked port, which causes a network storm and a denial of service.

A vulnerability in the interaction between the Server Message Block (SMB) protocol preprocessor and the Snort 3 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper error-checking when the Snort 3 detection engine is processing SMB traffic. An attacker could exploit this vulnerability by sending a crafted SMB packet stream through an affected device. A successful exploit could allow the attacker to cause the Snort process to reload, resulting in a DoS condition.

Cisco CBOS 2.3.8 and earlier allows remote attackers to cause a denial of service via a series of large ICMP ECHO REPLY (ping) packets, which cause it to enter ROMMON mode and stop forwarding packets.

Cisco Unified Presence before 8.5(4) does not properly detect recursion during entity expansion, which allows remote attackers to cause a denial of service (memory and CPU consumption, and process crash) via a crafted XML document containing a large number of nested entity references, aka Bug IDs CSCtq89842 and CSCtq88547, a similar issue to CVE-2003-1564.

Cisco VPN 3000 series concentrators before 2.5.2(F) allow remote attackers to cause a denial of service via an IP packet with an invalid IP option.

Cisco IOS 11.x and 12.0 with ATM support allows attackers to cause a denial of service via the undocumented Interim Local Management Interface (ILMI) SNMP community string.

Multiple Cisco networking products allow remote attackers to cause a denial of service on the local network via a series of ARP packets sent to the router's interface that contains a different MAC address for the router, which eventually causes the router to overwrite the MAC address in its ARP table.

Cisco IOS 12.1(2)T, 12.1(3)T allow remote attackers to cause a denial of service (reload) via a connection to TCP ports 3100-3999, 5100-5999, 7100-7999 and 10100-10999.

Cisco devices IOS 12.0 and earlier allow a remote attacker to cause a crash, or bad route updates, via malformed BGP updates with unrecognized transitive attribute.

The Locator/ID Separation Protocol (LISP) implementation in Cisco IOS 15.1 and 15.2 and NX-OS 4.1 through 6.2 allows remote attackers to cause a denial of service (device reload) via a crafted header in a packet, aka Bug ID CSCuu64279.

Cisco 600 routers running CBOS 2.4.1 and earlier allow remote attackers to cause a denial of service via a large ICMP echo (ping) packet.

A vulnerability in the SSH service of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to cause a process crash, resulting in a DoS condition for SSH access only. This vulnerability does not prevent the system from continuing to function, and web UI access is not affected. This vulnerability is due to insufficient resource management when an affected system is in an error condition. An attacker could exploit this vulnerability by sending malicious traffic to the affected system. A successful exploit could allow the attacker to cause the SSH process to crash and restart, resulting in a DoS condition for the SSH service.

A vulnerability in an API endpoint of multiple Cisco Unified Communications Products could allow an unauthenticated, remote attacker to cause high CPU utilization, which could impact access to the web-based management interface and cause delays with call processing. This API is not used for device management and is unlikely to be used in normal operations of the device. This vulnerability is due to improper API authentication and incomplete validation of the API request. An attacker could exploit this vulnerability by sending a crafted HTTP request to a specific API on the device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to high CPU utilization, which could negatively impact user traffic and management access. When the attack stops, the device will recover without manual intervention.

Cisco Gigabit Switch Routers (GSR) with Fast Ethernet / Gigabit Ethernet cards, from IOS versions 11.2(15)GS1A up to 11.2(19)GS0.2 and some versions of 12.0, do not properly handle line card failures, which allows remote attackers to bypass ACLs or force the interface to stop forwarding packets.

CBOS 2.4.1 and earlier in Cisco 600 routers allows remote attackers to cause a denial of service via a slow stream of TCP SYN packets.

The HTTP server in Cisco IOS 12.0 through 12.1 allows local users to cause a denial of service (crash and reload) via a URL containing a "?/" string.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.

Buffer overflow in Cisco TACACS+ tac_plus server allows remote attackers to cause a denial of service via a malformed packet with a long length field.

The Cisco IronPort Email Security Appliance (ESA) allows remote attackers to cause a denial of service (CPU consumption) via long Subject headers in e-mail messages, aka Bug ID CSCzv93864.

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.

Denial of service in Cisco IOS web server allows attackers to reboot the router using a long URL.

Buffer overflow in Cisco 7xx routers through the telnet service.

Denial of service in Cisco routers running NAT via a PORT command from an FTP client to a Telnet port.

Vulnerability in Cisco 7xx series routers allows a remote attacker to cause a system reload via a TCP connection to the router's TELNET port.

A vulnerability in the hardware-based SSL/TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to an implementation error within the cryptographic functions for SSL/TLS traffic processing when they are offloaded to the hardware. An attacker could exploit this vulnerability by sending a crafted stream of SSL/TLS traffic to an affected device. A successful exploit could allow the attacker to cause an unexpected error in the hardware-based cryptography engine, which could cause the device to reload.

Cisco Catalyst LAN switches running Catalyst 5000 supervisor software allows remote attackers to perform a denial of service by forcing the supervisor module to reload.

Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.1), 8.1 before 8.1(2.37), and 8.2 before 8.2(1.15); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (active IPsec tunnel loss and prevention of new tunnels) via a malformed IKE message through an existing tunnel to UDP port 4500, aka Bug ID CSCtc47782.

A vulnerability in the XCP Authentication Service of the Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P) could allow an unauthenticated, remote attacker to cause a temporary service outage for all Cisco Unified CM IM&P users who are attempting to authenticate to the service, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted login message to the affected device. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing new users from successfully authenticating. Exploitation of this vulnerability does not impact Cisco Unified CM IM&P users who were authenticated prior to an attack.

Cisco PIX firewall and CBAC IP fragmentation attack results in a denial of service.

Cisco TFTP Server 1.1 allows remote attackers to cause a denial of service (daemon crash) via a crafted (1) read (aka RRQ) or (2) write (aka WRQ) request, or other TFTP packet. NOTE: some of these details are obtained from third party information.

A vulnerability in the nginx configurations that are provided as part of the VPN-less reverse proxy for Cisco Finesse could allow an unauthenticated, remote attacker to create a denial of service (DoS) condition for new and existing users who are connected through a load balancer. This vulnerability is due to improper IP address filtering by the reverse proxy. An attacker could exploit this vulnerability by sending a series of unauthenticated requests to the reverse proxy. A successful exploit could allow the attacker to cause all current traffic and subsequent requests to the reverse proxy through a load balancer to be dropped, resulting in a DoS condition.

The web-based management interface on Cisco Small Business 220 devices with firmware before 1.0.1.1 allows remote attackers to cause a denial of service (interface outage) via a crafted HTTP request, aka Bug ID CSCuz76238.

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allow remote attackers to cause a denial of service (ASDM syslog outage) via a long URL, aka Bug IDs CSCsm11264 and CSCtb92911.

The proxy process on Cisco Web Security Appliance (WSA) devices through 9.1.0-070 allows remote attackers to cause a denial of service (CPU consumption) by establishing an FTP session and then improperly terminating the control connection after a file transfer, aka Bug ID CSCuy43468.

A vulnerability in the Layer 2 Tunneling Protocol (L2TP) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain L2TP packets. An attacker could exploit this vulnerability by sending crafted L2TP packets to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability.

Memory leak in the gk_circuit_info_do_in_acf function in the H.323 implementation in Cisco IOS before 15.0(1)XA allows remote attackers to cause a denial of service (memory consumption) via a large number of calls over a long duration, as demonstrated by InterZone Clear Token (IZCT) test traffic, aka Bug ID CSCsz72535.

The HTTP framework on Cisco SPA300, SPA500, and SPA51x devices allows remote attackers to cause a denial of service (device outage) via a series of malformed HTTP requests, aka Bug ID CSCut67385.

Multiple vulnerabilities in the web-based management interface of certain Cisco IP Phones could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web application for Cisco IP Phones could allow an unauthenticated, remote attacker to execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software fails to check the bounds of input data. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web server of a targeted device. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a DoS condition.

The General Packet Radio Switching Tunneling Protocol 1 (aka GTPv1) implementation on Cisco ASR 5000 Packet Data Network Gateway devices before 19.4 allows remote attackers to cause a denial of service (Session Manager process restart) via a crafted GTPv1 packet, aka Bug ID CSCuz46198.

Cisco IOS XR 6.0 and 6.0.1 on NCS 6000 devices allows remote attackers to cause a denial of service (OSPFv3 process reload) via crafted OSPFv3 packets, aka Bug ID CSCuz66289.