In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadget panics on 10gbps cabling usb_assign_descriptors() is called with 5 parameters, the last 4 of which are the usb_descriptor_header for: full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps), high-speed (USB2.0 - 480Mbps), super-speed (USB3.0 - 5Gbps), super-speed-plus (USB3.1 - 10Gbps). The differences between full/high/super-speed descriptors are usually substantial (due to changes in the maximum usb block size from 64 to 512 to 1024 bytes and other differences in the specs), while the difference between 5 and 10Gbps descriptors may be as little as nothing (in many cases the same tuning is simply good enough). However if a gadget driver calls usb_assign_descriptors() with a NULL descriptor for super-speed-plus and is then used on a max 10gbps configuration, the kernel will crash with a null pointer dereference, when a 10gbps capable device port + cable + host port combination shows up. (This wouldn't happen if the gadget max-speed was set to 5gbps, but it of course defaults to the maximum, and there's no real reason to artificially limit it) The fix is to simply use the 5gbps descriptor as the 10gbps descriptor, if a 10gbps descriptor wasn't provided. Obviously this won't fix the problem if the 5gbps descriptor is also NULL, but such cases can't be so trivially solved (and any such gadgets are unlikely to be used with USB3 ports any way).

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory ordering between normal and ordered work functions Ordered work functions aren't guaranteed to be handled by the same thread which executed the normal work functions. The only way execution between normal/ordered functions is synchronized is via the WORK_DONE_BIT, unfortunately the used bitops don't guarantee any ordering whatsoever. This manifested as seemingly inexplicable crashes on ARM64, where async_chunk::inode is seen as non-null in async_cow_submit which causes submit_compressed_extents to be called and crash occurs because async_chunk::inode suddenly became NULL. The call trace was similar to: pc : submit_compressed_extents+0x38/0x3d0 lr : async_cow_submit+0x50/0xd0 sp : ffff800015d4bc20 <registers omitted for brevity> Call trace: submit_compressed_extents+0x38/0x3d0 async_cow_submit+0x50/0xd0 run_ordered_work+0xc8/0x280 btrfs_work_helper+0x98/0x250 process_one_work+0x1f0/0x4ac worker_thread+0x188/0x504 kthread+0x110/0x114 ret_from_fork+0x10/0x18 Fix this by adding respective barrier calls which ensure that all accesses preceding setting of WORK_DONE_BIT are strictly ordered before setting the flag. At the same time add a read barrier after reading of WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads would be strictly ordered after reading the bit. This in turn ensures are all accesses before WORK_DONE_BIT are going to be strictly ordered before any access that can occur in ordered_func.

Stack-based buffer overflow in the acl_get function in Oracle MySQL 5.5.19 and other versions through 5.5.28, and 5.1.53 and other versions through 5.1.66, and MariaDB 5.5.2.x before 5.5.28a, 5.3.x before 5.3.11, 5.2.x before 5.2.13 and 5.1.x before 5.1.66, allows remote authenticated users to execute arbitrary code via a long argument to the GRANT FILE command.

IBM InfoSphere Guardium 8.0, 8.01, and 8.2 is vulnerable to SQL injection. A remote authenticated attacker could send specially-crafted SQL statements to multiple scripts, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 78282.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 is vulnerable to a privilege escalation vulnerability when using the SAML Web Inbound Trust Association Interceptor (TAI). IBM X-Force ID: 202006.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 could allow a remote user to gain elevated privileges on the system. IBM X-Force ID: 201300.

The x86 emulator in KVM 83 does not use the Current Privilege Level (CPL) and I/O Privilege Level (IOPL) in determining the memory access available to CPL3 code, which allows guest OS users to cause a denial of service (guest OS crash) or gain privileges on the guest OS by leveraging access to a (1) IO port or (2) MMIO region, a related issue to CVE-2010-0306.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Clear stale u->oob_skb. syzkaller started to report deadlock of unix_gc_lock after commit 4090fa373f0e ("af_unix: Replace garbage collection algorithm."), but it just uncovers the bug that has been there since commit 314001f0bf92 ("af_unix: Add OOB support"). The repro basically does the following. from socket import * from array import array c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) c1.sendmsg([b'a'], [(SOL_SOCKET, SCM_RIGHTS, array("i", [c2.fileno()]))], MSG_OOB) c2.recv(1) # blocked as no normal data in recv queue c2.close() # done async and unblock recv() c1.close() # done async and trigger GC A socket sends its file descriptor to itself as OOB data and tries to receive normal data, but finally recv() fails due to async close(). The problem here is wrong handling of OOB skb in manage_oob(). When recvmsg() is called without MSG_OOB, manage_oob() is called to check if the peeked skb is OOB skb. In such a case, manage_oob() pops it out of the receive queue but does not clear unix_sock(sk)->oob_skb. This is wrong in terms of uAPI. Let's say we send "hello" with MSG_OOB, and "world" without MSG_OOB. The 'o' is handled as OOB data. When recv() is called twice without MSG_OOB, the OOB data should be lost. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM, 0) >>> c1.send(b'hello', MSG_OOB) # 'o' is OOB data 5 >>> c1.send(b'world') 5 >>> c2.recv(5) # OOB data is not received b'hell' >>> c2.recv(5) # OOB date is skipped b'world' >>> c2.recv(5, MSG_OOB) # This should return an error b'o' In the same situation, TCP actually returns -EINVAL for the last recv(). Also, if we do not clear unix_sk(sk)->oob_skb, unix_poll() always set EPOLLPRI even though the data has passed through by previous recv(). To avoid these issues, we must clear unix_sk(sk)->oob_skb when dequeuing it from recv queue. The reason why the old GC did not trigger the deadlock is because the old GC relied on the receive queue to detect the loop. When it is triggered, the socket with OOB data is marked as GC candidate because file refcount == inflight count (1). However, after traversing all inflight sockets, the socket still has a positive inflight count (1), thus the socket is excluded from candidates. Then, the old GC lose the chance to garbage-collect the socket. With the old GC, the repro continues to create true garbage that will never be freed nor detected by kmemleak as it's linked to the global inflight list. That's why we couldn't even notice the issue.

IBM InfoSphere Information 11.7 Server does not invalidate session after logout which could allow an authenticated user to impersonate another user on the system.

VMware Workspace ONE Access 21.08, 20.10.0.1, and 20.10 contain an authentication bypass vulnerability. A malicious actor, who has successfully provided first-factor authentication, may be able to obtain second-factor authentication provided by VMware Verify.

IBM Maximo for Civil Infrastructure 7.6.2 includes executable functionality (such as a library) from a source that is outside of the intended control sphere. IBM X-Force ID: 196619.

In the Linux kernel 5.3.10, there is a use-after-free (read) in the perf_trace_lock_acquire function (related to include/trace/events/lock.h).

IBM Db2 JDBC Driver for Db2 for Linux, UNIX and Windows 10.5, 11.1, and 11.5 could allow a remote authenticated attacker to execute arbitrary code on the system, caused by an unchecked class instantiation when providing plugin classes. By sending a specially crafted request using the named pluginClassName class, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 249516.

Unspecified vulnerability in HP OpenView Network Node Manager (OV NNM) 6.20, 6.4x, 7.01, 7.50, and 7.51 allows remote authenticated users to access certain privileged "facilities" via unspecified vectors.

IBM Db2 JDBC Driver for Db2 for Linux, UNIX and Windows 10.5, 11.1, and 11.5 could allow a remote authenticated attacker to execute arbitrary code on the system, caused by an unchecked logger injection. By sending a specially crafted request using the named traceFile property, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 249517.

IBM Resilient OnPrem 38.2 could allow a privileged user to inject malicious commands through Python3 scripting. IBM X-Force ID: 185503.

VMware Cloud Director 10.0.x before 10.0.0.2, 9.7.0.x before 9.7.0.5, 9.5.0.x before 9.5.0.6, and 9.1.0.x before 9.1.0.4 do not properly handle input leading to a code injection vulnerability. An authenticated actor may be able to send malicious traffic to VMware Cloud Director which may lead to arbitrary remote code execution. This vulnerability can be exploited through the HTML5- and Flex-based UIs, the API Explorer interface and API access.

IBM Sterling B2B Integrator Standard Edition 5.2.0.0 through 5.2.6.5_2, 6.0.0.0 through 6.0.3.2, and 6.1.0.0 could allow an authenticated user to create a privileged account due to improper access controls. IBM X-Force ID: 188896.

IBM OpenPages with Watson 8.1 and 8.2 could allow an authenticated user to upload a file that could execute arbitrary code on the system. IBM X-Force ID: 207633.

IBM Security Identity Manager 7.0.2 could allow an authenticated user to bypass security and perform actions that they should not have access to. IBM X-Force ID: 200015

IBM Security Guardium 11.5 could allow a user to take over another user's session due to insufficient session expiration. IBM X-Force ID: 243657.

IBM Security Guardium 10.6 and 11.2 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 191398.

IBM Sterling Partner Engagement Manager 6.1, 6.2, and 6.2.1 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 236208.

IBM Sterling B2B Integrator Standard Edition 6.1.0.0 through 6.1.1.1, and 6.1.2.0 could allow an authenticated user to perform actions they should not have access to due to improper permission controls. IBM X-Force ID: 235597.

VMware Workspace ONE Access, Identity Manager and vRealize Automation contain two remote code execution vulnerabilities (CVE-2022-22957 & CVE-2022-22958). A malicious actor with administrative access can trigger deserialization of untrusted data through malicious JDBC URI which may result in remote code execution.

In drivers/usb/gadget/udc/udc-xilinx.c in the Linux kernel before 5.16.12, the endpoint index is not validated and might be manipulated by the host for out-of-array access.

IBM Spectrum Protect Plus Container Backup and Restore (10.1.5 through 10.1.10.2 for Kubernetes and 10.1.7 through 10.1.10.2 for Red Hat OpenShift) could allow a remote attacker to bypass IBM Spectrum Protect Plus role based access control restrictions, caused by improper disclosure of session information. By retrieving the logs of a container an attacker could exploit this vulnerability to bypass login security of the IBM Spectrum Protect Plus server and gain unauthorized access based on the permissions of the IBM Spectrum Protect Plus user to the vulnerable Spectrum Protect Plus server software. IBM X-Force ID: 225340.

IBM Curam Social Program Management 8.0.0 and 8.0.1 does not invalidate session after logout which could allow an authenticated user to impersonate another user on the system.

VMware Workspace ONE Access, Identity Manager and vRealize Automation contain two remote code execution vulnerabilities (CVE-2022-22957 & CVE-2022-22958). A malicious actor with administrative access can trigger deserialization of untrusted data through malicious JDBC URI which may result in remote code execution.

IBM Db2 JDBC Driver for Db2 for Linux, UNIX and Windows 10.5, 11.1, and 11.5 could allow a remote authenticated attacker to execute arbitrary code via JNDI Injection. By sending a specially crafted request using the property clientRerouteServerListJNDIName, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 249514.

IBM Sterling Connect:Direct Web Services 6.1.0, 6.2.0, and 6.3.0 could allow an authenticated user to spoof the identity of another user due to improper authorization which could allow the user to bypass access restrictions.

IBM Sterling Connect:Direct Web Services 6.1.0, 6.2.0, and 6.3.0 does not invalidate session after a browser closure which could allow an authenticated user to impersonate another user on the system.

IBM QRadar 7.3.0 to 7.3.3 Patch 2 could allow an authenticated user to send a specially crafted command which would be executed as a lower privileged user. IBM X-ForceID: 175897.

The VeloCloud Orchestrator does not apply correct input validation which allows for blind SQL-injection. A malicious actor with tenant access to Velocloud Orchestrator could enter specially crafted SQL queries and obtain data to which they are not privileged.

IBM QRadar 7.3.0 to 7.3.3 Patch 2 could allow a remote attacker to include arbitrary files. A remote attacker could send a specially-crafted request specify a malicious file from a remote system, which could allow the attacker to execute arbitrary code on the vulnerable server. IBM X-ForceID: 175898.

IBM QRadar 7.3.0 to 7.3.3 Patch 2 is vulnerable to Server Side Request Forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. IBM X-ForceID: 176404.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adding array index check to prevent memory corruption [Why & How] Array indices out of bound caused memory corruption. Adding checks to ensure that array index stays in bound.

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame Andrew and Nikolay reported connectivity issues with Cilium's service load-balancing in case of vmxnet3. If a BPF program for native XDP adds an encapsulation header such as IPIP and transmits the packet out the same interface, then in case of vmxnet3 a corrupted packet is being sent and subsequently dropped on the path. vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp() through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address: page = virt_to_page(xdpf->data); tbi->dma_addr = page_pool_get_dma_addr(page) + VMXNET3_XDP_HEADROOM; dma_sync_single_for_device(&adapter->pdev->dev, tbi->dma_addr, buf_size, DMA_TO_DEVICE); The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP BPF program could have moved xdp->data. While the passed buf_size is correct (xdpf->len), the dma_addr needs to have a dynamic offset which can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data - xdp->data_hard_start.

In the Linux kernel, the following vulnerability has been resolved: nfs/localio: must clear res.replen in nfs_local_read_done Otherwise memory corruption can occur due to NFSv3 LOCALIO reads leaving garbage in res.replen: - nfs3_read_done() copies that into server->read_hdrsize; from there nfs3_proc_read_setup() copies it to args.replen in new requests. - nfs3_xdr_enc_read3args() passes that to rpc_prepare_reply_pages() which includes it in hdrsize for xdr_init_pages, so that rq_rcv_buf contains a ridiculous len. - This is copied to rq_private_buf and xs_read_stream_request() eventually passes the kvec to sock_recvmsg() which receives incoming data into entirely the wrong place. This is easily reproduced with NFSv3 LOCALIO that is servicing reads when it is made to pivot back to using normal RPC. This switch back to using normal NFSv3 with RPC can occur for a few reasons but this issue was exposed with a test that stops and then restarts the NFSv3 server while LOCALIO is performing heavy read IO.

The __ip6_append_data function in net/ipv6/ip6_output.c in the Linux kernel through 4.11.3 is too late in checking whether an overwrite of an skb data structure may occur, which allows local users to cause a denial of service (system crash) via crafted system calls.

In the Linux kernel, the following vulnerability has been resolved: HID: betop: fix slab-out-of-bounds Write in betop_probe Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver. The problem is the driver assumes the device must have an input report but some malicious devices violate this assumption. So this patch checks hid_device's input is non empty before it's been used.

A flaw was found in the Linux kernel before version 4.12 in the way the KVM module processed the trap flag(TF) bit in EFLAGS during emulation of the syscall instruction, which leads to a debug exception(#DB) being raised in the guest stack. A user/process inside a guest could use this flaw to potentially escalate their privileges inside the guest. Linux guests are not affected by this.

The cookie feature in the packet action API implementation in net/sched/act_api.c in the Linux kernel 4.11.x through 4.11-rc7 mishandles the tb nlattr array, which allows local users to cause a denial of service (uninitialized memory access and refcount underflow, and system hang or crash) or possibly have unspecified other impact via "tc filter add" commands in certain contexts. NOTE: this does not affect stable kernels, such as 4.10.x, from kernel.org.

The vmw_gb_surface_define_ioctl function in drivers/gpu/drm/vmwgfx/vmwgfx_surface.c in the Linux kernel through 4.10.7 does not validate certain levels data, which allows local users to cause a denial of service (system hang) via a crafted ioctl call for a /dev/dri/renderD* device.

The NFSv2/NFSv3 server in the nfsd subsystem in the Linux kernel through 4.10.11 allows remote attackers to cause a denial of service (system crash) via a long RPC reply, related to net/sunrpc/svc.c, fs/nfsd/nfs3xdr.c, and fs/nfsd/nfsxdr.c.

The packet_set_ring function in net/packet/af_packet.c in the Linux kernel through 4.10.6 does not properly validate certain block-size data, which allows local users to cause a denial of service (integer signedness error and out-of-bounds write), or gain privileges (if the CAP_NET_RAW capability is held), via crafted system calls.

drivers/char/virtio_console.c in the Linux kernel 4.9.x and 4.10.x before 4.10.12 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist.

NVIDIA Windows GPU Display Driver, all versions, contains a vulnerability in the kernel mode layer (nvlddmkm.sys) handler for DxgkDdiEscape in which the size of an input buffer is not validated, which may lead to denial of service or escalation of privileges.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/ufence: Prefetch ufence addr to catch bogus address access_ok() only checks for addr overflow so also try to read the addr to catch invalid addr sent from userspace. (cherry picked from commit 9408c4508483ffc60811e910a93d6425b8e63928)

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format This can lead to out of bounds writes since frames of this type were not taken into account when calculating the size of the frames buffer in uvc_parse_streaming.