In Brave Desktop 1.17 through 1.33 before 1.33.106, when CNAME-based adblocking and a proxying extension with a SOCKS fallback are enabled, additional DNS requests are issued outside of the proxying extension using the system's DNS settings, resulting in information disclosure. NOTE: this issue exists because of an incomplete fix for CVE-2021-21323 and CVE-2021-22916.

In the IPv6 implementation in the Linux kernel before 5.13.3, net/ipv6/output_core.c has an information leak because of certain use of a hash table which, although big, doesn't properly consider that IPv6-based attackers can typically choose among many IPv6 source addresses.

The ksmbd server through 3.4.2, as used in the Linux kernel through 5.15.8, sometimes communicates in cleartext even though encryption has been enabled. This occurs because it sets the SMB2_GLOBAL_CAP_ENCRYPTION flag when using the SMB 3.1.1 protocol, which is a violation of the SMB protocol specification. When Windows 10 detects this protocol violation, it disables encryption.

IBM Concert Software 1.0.0, 1.0.1, 1.0.2, 1.0.2.1, and 1.0.3 could disclose sensitive system information to an unauthorized actor that could be used in further attacks against the system.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: lantiq_etop: fix memory disclosure When applying padding, the buffer is not zeroed, which results in memory disclosure. The mentioned data is observed on the wire. This patch uses skb_put_padto() to pad Ethernet frames properly. The mentioned function zeroes the expanded buffer. In case the packet cannot be padded it is silently dropped. Statistics are also not incremented. This driver does not support statistics in the old 32-bit format or the new 64-bit format. These will be added in the future. In its current form, the patch should be easily backported to stable versions. Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets in hardware, so software padding must be applied.

IBM Storage Defender - Resiliency Service 2.0.0 through 2.0.9 does not properly validate a certificate which could allow an attacker to spoof a trusted entity by interfering in the communication path between the host and client.

IBM Storage Protect Plus Server 10.1.0 through 10.1.15.2 Admin Console could allow a remote attacker to obtain sensitive information due to improper validation of unsecured endpoints which could be used in further attacks against the system. IBM X-Force ID: 270599.

Adobe Campaign version 21.2.1 (and earlier) is affected by a Path Traversal vulnerability that could lead to reading arbitrary server files. By leveraging an exposed XML file, an unauthenticated attacker can enumerate other files on the server.

IBM API Connect 5.0.0.0 through 5.0.8.6 developer portal could allow a remote attacker to traverse directories on the system. An attacker could send a specially-crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. IBM X-Force ID: 163681.

IBM Intelligent Operations Center V5.1.0 - V5.2.0, IBM Intelligent Operations Center for Emergency Management V5.1.0 - V5.1.0.6, and IBM Water Operations for Waternamics V5.1.0 - V5.2.1.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 161201.

IBM PureApplication System 2.2.3.0 through 2.2.5.3 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 159417.

IBM Security Guardium Big Data Intelligence (SonarG) 4.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 161418.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 171826.

IBM Spectrum Copy Data Management 2.2.13 and earlier has weak authentication and password rules and incorrectly handles default credentials for the Spectrum Copy Data Management Admin console. IBM X-Force ID: 214957.

IBM Guardium Data Encryption (GDE) 4.0.0 and 5.0.0 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 213860.

IBM Security Verify 10.0.0, 10.0.1.0, and 10.0.2.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210067.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 171929.

IBM System Storage DS8000 Management Console (HMC) R8.5 88.5x.x.x, R9.1 89.1x.0.0, and R9.2 89.2x.0.0 could allow a remote attacker to obtain sensitive information through unpublished URLs. IBM X-Force ID: 210330.

IBM Sterling B2B Integrator Standard Edition 5.2.0. 0 through 6.1.1.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210171.

IBM Security Directory Server 6.4.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 165178.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, 4.0, and 4.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 212792.

IBM Maximo Asset Management 7.6.1.1 and 7.6.1.2 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 210163.

IBM Security Verify Access Appliance and Container 10.0.0 through 10.0.8 transmits sensitive or security-critical data in cleartext in a communication channel that can be sniffed by unauthorized actors.

IBM Spectrum Protect Plus 10.1.0 and 10.5.0, when protecting Microsoft SQL or Microsoft Exchange, could allow an attacker with intimate knowledge of the system to obtain highly sensitive information.

IBM Security Verify Bridge 1.0.5.0 could allow a user to obtain sensitive information due to improper certificate validation. IBM X-Force ID: 208155.

IBM System Storage DS8000 Management Console (HMC) R8.5 88.5x.x.x, R9.1 89.1x.0.0, and R9.2 89.2x.0.0 could allow a remote attacker to obtain sensitive information through unpublished URLs. IBM X-Force ID: 210331.

IBM Sterling Connect:Direct Web Services 1.0 and 6.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 209507.

IBM Qradar Advisor 1.1 through 2.5 with Watson uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 166206.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, 4.0, and 4.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 212793.

IBM Cognos Analytics 11.0 and 11.1 could allow a remote attacker to obtain credentials from a user's browser via incorrect autocomplete settings in New Content Backup page. IBM X-Force ID: 172130.

IBM Maximo Asset Management 7.6.1.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 210892.

IBM Spectrum Copy Data Management 2.2.13 and earlier uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 214617.

IBM Security Directory Server 6.4.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 165813.

IBM API Connect 2018.1 and 2018.4.1.2 apis can be leveraged by unauthenticated users to discover login ids of registered users. IBM X-Force ID: 156544.

IBM Data Risk Manager (iDNA) 2.0.6 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 207980.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Sterling Secure Proxy 6.0.0.0, 6.0.0.1, 6.0.0.2, 6.0.0.3, and 6.1.0.0 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot dot" sequences (/.../) to view arbitrary files on the system.

IBM Cognos Analytics Mobile for Android 1.1.14 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Spectrum Copy Data Management 2.2.13 and earlier could allow a remote attacker to obtain sensitive information, caused by the improper handling of requests for Spectrum Copy Data Management Admin Console. By sending a specially-crafted request, a remote attacker could exploit this vulnerability to obtain sensitive information. IBM X-Force ID: 214524.

IBM Security Guardium 10.5 and 11.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt sensitive information. IBM X-Force ID: 215585.

IBM Cognos Controller 11.0.0 and 11.0.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Engineering Requirements Management DOORS Next 7.0.2, 7.0.3, and 7.1 could allow a remote attacker to download temporary files which could expose application logic or other sensitive information.

IBM API Connect 2018.4.1.7 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 168510.

IBM Common Licensing 9.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 297895.

IBM Security Information Queue (ISIQ) 1.0.0, 1.0.1, and 1.0.2 is missing the HTTP Strict Transport Security header. Users can navigate by mistake to the unencrypted version of the web application or accept invalid certificates. This leads to sensitive data being sent unencrypted over the wire. IBM X-Force ID: 158661.

IBM Datacap Navigator 9.1.5, 9.1.6, 9.1.7, 9.1.8, and 9.1.9 temporarily stores data from different environments that could be obtained by a malicious user. IBM X-Force ID: 295791.

IBM Sterling Connect:Direct Web Services 6.0, 6.1, 6.2, and 6.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Datacap Navigator 9.1.5, 9.1.6, 9.1.7, 9.1.8, and 9.1.9 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 295970.

IBM Storage Defender 2.0.0 through 2.0.7 on-prem defender-sensor-cmd CLI could allow a remote attacker to obtain sensitive information, caused by sending network requests over an insecure channel. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

IBM Cognos Controller 10.3.0, 10.3.1, 10.4.0, and 10.4.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 158880.