Server Side Request Forgery in Apache Solr, versions 1.3 until 7.6 (inclusive). Since the "shards" parameter does not have a corresponding whitelist mechanism, a remote attacker with access to the server could make Solr perform an HTTP GET request to any reachable URL.

Server-Side Request Forgery (SSRF) in Apache HTTP Server on Windows allows to potentially leak NTLM hashes to a malicious server via  mod_rewrite or apache expressions that pass unvalidated request input. This issue affects Apache HTTP Server: from 2.4.0 through 2.4.63. Note:  The Apache HTTP Server Project will be setting a higher bar for accepting vulnerability reports regarding SSRF via UNC paths. The server offers limited protection against administrators directing the server to open UNC paths. Windows servers should limit the hosts they will connect over via SMB based on the nature of NTLM authentication.

SSRF in Apache HTTP Server on Windows with mod_rewrite in server/vhost context, allows to potentially leak NTML hashes to a malicious server via SSRF and malicious requests. Users are recommended to upgrade to version 2.4.62 which fixes this issue. 

SSRF in Apache HTTP Server on Windows allows to potentially leak NTLM hashes to a malicious server via SSRF and malicious requests or content Users are recommended to upgrade to version 2.4.60 which fixes this issue.  Note: Existing configurations that access UNC paths will have to configure new directive "UNCList" to allow access during request processing.

Import functionality is vulnerable to DNS rebinding attacks between verification and processing of the URL.  Project administrators can run these imports, which could cause Allura to read from internal services and expose them. This issue affects Apache Allura from 1.0.1 through 1.16.0. Users are recommended to upgrade to version 1.17.0, which fixes the issue. If you are unable to upgrade, set "disable_entry_points.allura.importers = forge-tracker, forge-discussion" in your .ini config file.

A SSRF vulnerability in WADL service description in versions of Apache CXF before 4.0.5, 3.6.4 and 3.5.9 allows an attacker to perform SSRF style attacks on REST webservices. The attack only applies if a custom stylesheet parameter is configured.

Server-Side Request Forgery (SSRF) vulnerability in Apache ServiceComb Service-Center. Attackers can obtain sensitive server information through specially crafted requests.This issue affects Apache ServiceComb before 2.1.0(include). Users are recommended to upgrade to version 2.2.0, which fixes the issue.

Arbitrary file properties reading vulnerability in Apache Software Foundation Apache OFBiz when user operates an uri call without authorizations. The same uri can be operated to realize a SSRF attack also without authorizations. Users are recommended to upgrade to version 18.12.11, which fixes this issue.

A vulnerability in Batik of Apache XML Graphics allows an attacker to run Java code from untrusted SVG via JavaScript. This issue affects Apache XML Graphics prior to 1.16. Users are recommended to upgrade to version 1.16.

A vulnerability in Batik of Apache XML Graphics allows an attacker to run untrusted Java code from an SVG. This issue affects Apache XML Graphics prior to 1.16. It is recommended to update to version 1.16.

Server-Side Request Forgery (SSRF) vulnerability in Batik of Apache XML Graphics allows an attacker to access files using a Jar url. This issue affects Apache XML Graphics Batik 1.14.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.15, a Server-Side Forgery Request vulnerability can be activated when unmarshalling. The vulnerability may allow a remote attacker to request data from internal resources that are not publicly available only by manipulating the processed input stream. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.15. The reported vulnerability does not exist if running Java 15 or higher. No user is affected who followed the recommendation to setup XStream's Security Framework with a whitelist! Anyone relying on XStream's default blacklist can immediately switch to a whilelist for the allowed types to avoid the vulnerability. Users of XStream 1.4.14 or below who still want to use XStream default blacklist can use a workaround described in more detailed in the referenced advisories.

Apache Olingo versions 4.0.0 to 4.7.0 provide the AsyncRequestWrapperImpl class which reads a URL from the Location header, and then sends a GET or DELETE request to this URL. It may allow to implement a SSRF attack. If an attacker tricks a client to connect to a malicious server, the server can make the client call any URL including internal resources which are not directly accessible by the attacker.

A possible arbitrary file read and SSRF vulnerability has been identified in Apache Kafka Client. Apache Kafka Clients accept configuration data for setting the SASL/OAUTHBEARER connection with the brokers, including "sasl.oauthbearer.token.endpoint.url" and "sasl.oauthbearer.jwks.endpoint.url". Apache Kafka allows clients to read an arbitrary file and return the content in the error log, or sending requests to an unintended location. In applications where Apache Kafka Clients configurations can be specified by an untrusted party, attackers may use the "sasl.oauthbearer.token.endpoint.url" and "sasl.oauthbearer.jwks.endpoint.url" configuratin to read arbitrary contents of the disk and environment variables or make requests to an unintended location. In particular, this flaw may be used in Apache Kafka Connect to escalate from REST API access to filesystem/environment/URL access, which may be undesirable in certain environments, including SaaS products. Since Apache Kafka 3.9.1/4.0.0, we have added a system property ("-Dorg.apache.kafka.sasl.oauthbearer.allowed.urls") to set the allowed urls in SASL JAAS configuration. In 3.9.1, it accepts all urls by default for backward compatibility. However in 4.0.0 and newer, the default value is empty list and users have to set the allowed urls explicitly.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to request data from internal resources that are not publicly available only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

Apache 1.3.20 with Multiviews enabled allows remote attackers to view directory contents and bypass the index page via a URL containing the "M=D" query string.

Apache OpenMeetings 1.0.0 uses not very strong cryptographic storage, captcha is not used in registration and forget password dialogs and auth forms missing brute force protection.

In Apache Kylin, Cross-origin requests with credentials are allowed to be sent from any origin. This issue affects Apache Kylin 2 version 2.6.6 and prior versions; Apache Kylin 3 version 3.1.2 and prior versions; Apache Kylin 4 version 4.0.0 and prior versions.

Vulnerability in the mod_vhost_alias virtual hosting module for Apache 1.3.9, 1.3.11 and 1.3.12 allows remote attackers to obtain the source code for CGI programs if the cgi-bin directory is under the document root.

The HTTP/2 implementation in Apache Tomcat 9.0.0.M1 to 9.0.0.M21 and 8.5.0 to 8.5.15 bypassed a number of security checks that prevented directory traversal attacks. It was therefore possible to bypass security constraints using a specially crafted URL.

Apache Kylin provides encryption classes PasswordPlaceholderConfigurer to help users encrypt their passwords. In the encryption algorithm used by this encryption class, the cipher is initialized with a hardcoded key and IV. If users use class PasswordPlaceholderConfigurer to encrypt their password and configure it into kylin's configuration file, there is a risk that the password may be decrypted. This issue affects Apache Kylin 2 version 2.6.6 and prior versions; Apache Kylin 3 version 3.1.2 and prior versions; Apache Kylin 4 version 4.0.0 and prior versions.

Directory traversal vulnerability in Apache HTTP Server and Tomcat 5.x before 5.5.22 and 6.x before 6.0.10, when using certain proxy modules (mod_proxy, mod_rewrite, mod_jk), allows remote attackers to read arbitrary files via a .. (dot dot) sequence with combinations of (1) "/" (slash), (2) "\" (backslash), and (3) URL-encoded backslash (%5C) characters in the URL, which are valid separators in Tomcat but not in Apache.

During a routine security analysis, it was found that one of the ports in Apache Impala (incubating) 2.7.0 to 2.8.0 sent data in plaintext even when the cluster was configured to use TLS. The port in question was used by the StatestoreSubscriber class which did not use the appropriate secure Thrift transport when TLS was turned on. It was therefore possible for an adversary, with access to the network, to eavesdrop on the packets going to and coming from that port and view the data in plaintext.

Apache CXF's STSClient before 3.1.11 and 3.0.13 uses a flawed way of caching tokens that are associated with delegation tokens, which means that an attacker could craft a token which would return an identifer corresponding to a cached token for another user.

In Apache NiFi before 0.7.2 and 1.x before 1.1.2 in a cluster environment, if an anonymous user request is replicated to another node, the originating node identity is used rather than the "anonymous" user.

The statistics generator in Apache Pony Mail 0.7 to 0.9 was found to be returning timestamp data without proper authorization checks. This could lead to derived information disclosure on private lists about the timing of specific email subjects or text bodies, though without disclosing the content itself. As this was primarily used as a caching feature for faster loading times, the caching was disabled by default to prevent this. Users using 0.9 should upgrade to 0.10 to address this issue.

When using the Index Replication feature, Apache Solr nodes can pull index files from a master/leader node using an HTTP API which accepts a file name. However, Solr before 5.5.4 and 6.x before 6.4.1 did not validate the file name, hence it was possible to craft a special request involving path traversal, leaving any file readable to the Solr server process exposed. Solr servers protected and restricted by firewall rules and/or authentication would not be at risk since only trusted clients and users would gain direct HTTP access.

The OAuth2 Hawk and JOSE MAC Validation code in Apache CXF prior to 3.0.13 and 3.1.x prior to 3.1.10 is not using a constant time MAC signature comparison algorithm which may be exploited by sophisticated timing attacks.

Error responses from Apache Atlas versions 0.6.0-incubating and 0.7.0-incubating included stack trace, exposing excessive information.

Apache Cassandra versions 2.1.0 to 2.1.22, 2.2.0 to 2.2.19, 3.0.0 to 3.0.23, and 3.11.0 to 3.11.9, when using 'dc' or 'rack' internode_encryption setting, allows both encrypted and unencrypted internode connections. A misconfigured node or a malicious user can use the unencrypted connection despite not being in the same rack or dc, and bypass mutual TLS requirement.

All versions of Apache Santuario - XML Security for Java prior to 2.2.3 and 2.1.7 are vulnerable to an issue where the "secureValidation" property is not passed correctly when creating a KeyInfo from a KeyInfoReference element. This allows an attacker to abuse an XPath Transform to extract any local .xml files in a RetrievalMethod element.

In Apache Airflow 1.8.2 and earlier, an experimental Airflow feature displayed authenticated cookies, as well as passwords to databases used by Airflow. An attacker who has limited access to airflow, whether it be via XSS or by leaving a machine unlocked can exfiltrate all credentials from the system.

A flaw was found in a change made to path normalization in Apache HTTP Server 2.4.49. An attacker could use a path traversal attack to map URLs to files outside the directories configured by Alias-like directives. If files outside of these directories are not protected by the usual default configuration "require all denied", these requests can succeed. If CGI scripts are also enabled for these aliased pathes, this could allow for remote code execution. This issue is known to be exploited in the wild. This issue only affects Apache 2.4.49 and not earlier versions. The fix in Apache HTTP Server 2.4.50 was found to be incomplete, see CVE-2021-42013.

In Apache Ozone before 1.2.0, Recon HTTP endpoints provide access to OM, SCM and Datanode metadata. Due to a bug, any unauthenticated user can access the data from these endpoints.

While investigating bug 64830 it was discovered that Apache Tomcat 10.0.0-M1 to 10.0.0-M9, 9.0.0-M1 to 9.0.39 and 8.5.0 to 8.5.59 could re-use an HTTP request header value from the previous stream received on an HTTP/2 connection for the request associated with the subsequent stream. While this would most likely lead to an error and the closure of the HTTP/2 connection, it is possible that information could leak between requests.

Direct Request ('Forced Browsing') vulnerability in Apache OFBiz. This issue affects Apache OFBiz: before 18.12.16. Users are recommended to upgrade to version 18.12.16, which fixes the issue.

The gadget renderer in Apache Shindig 2.5.0 for PHP allows remote attackers to obtain sensitive information via an XML document containing an external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue.

Unspecified vulnerability in Apache Wicket 1.4.x before 1.4.23, 1.5.x before 1.5.11, and 6.x before 6.8.0 allows remote attackers to obtain sensitive information via vectors that cause raw HTML templates to be rendered without being processed and reading the information that is outside of wicket:panel markup.

Exposure of temporary credentials in logs in Apache Arrow Rust Object Store (`object_store` crate), version 0.10.1 and earlier on all platforms using AWS WebIdentityTokens.  On certain error conditions, the logs may contain the OIDC token passed to AssumeRoleWithWebIdentity https://docs.aws.amazon.com/STS/latest/APIReference/API_AssumeRoleWithWebIdentity.html . This allows someone with access to the logs to impersonate that identity, including performing their own calls to AssumeRoleWithWebIdentity, until the OIDC token expires. Typically OIDC tokens are valid for up to an hour, although this will vary depending on the issuer. Users are recommended to use a different AWS authentication mechanism, disable logging or upgrade to version 0.10.2, which fixes this issue. Details: When using AWS WebIdentityTokens with the object_store crate, in the event of a failure and automatic retry, the underlying reqwest error, including the full URL with the credentials, potentially in the parameters, is written to the logs.  Thanks to Paul Hatcherian for reporting this vulnerability

Apache Camel's JMX is vulnerable to Rebind Flaw. Apache Camel 2.22.x, 2.23.x, 2.24.x, 2.25.x, 3.0.0 up to 3.1.0 is affected. Users should upgrade to 3.2.0.

The replay-countermeasure functionality in the HTTP Digest Access Authentication implementation in Apache Tomcat 5.5.x before 5.5.36, 6.x before 6.0.36, and 7.x before 7.0.30 tracks cnonce (aka client nonce) values instead of nonce (aka server nonce) and nc (aka nonce-count) values, which makes it easier for remote attackers to bypass intended access restrictions by sniffing the network for valid requests, a different vulnerability than CVE-2011-1184.

A vulnerability in XML processing in Apache Jena, in versions up to 4.1.0, may allow an attacker to execute XML External Entities (XXE), including exposing the contents of local files to a remote server.

Apache Tomcat 5 before 5.5.17 allows remote attackers to list directories via a semicolon (;) preceding a filename with a mapped extension, as demonstrated by URLs ending with /;index.jsp and /;help.do.

Hertzbeat is an open source, real-time monitoring system. Hertzbeat 1.6.0 and earlier declares a /api/monitor/{monitorId}/metric/{metricFull} endpoint to download job metrics. In the process, it executes a SQL query with user-controlled data, allowing for SQL injection.

The Apache Sling JCR ContentLoader 2.1.4 XmlReader used in the Sling JCR content loader module makes it possible to import arbitrary files in the content repository, including local files, causing potential information leaks. Users should upgrade to version 2.1.6 of the JCR ContentLoader

Apache Derby before 10.1.2.1 exposes the (1) user and (2) password attributes in cleartext via (a) the RDBNAM parameter of the ACCSEC command and (b) the output of the DatabaseMetaData.getURL function, which allows context-dependent attackers to obtain sensitive information.

Apache Tomcat 4.0.3, when running on Windows, allows remote attackers to obtain sensitive information via a request for a file that contains an MS-DOS device name such as lpt9, which leaks the pathname in an error message, as demonstrated by lpt9.xtp using Nikto.

In Apache Linkis <= 1.5.0, a Random string security vulnerability in Spark EngineConn, random string generated by the Token when starting Py4j uses the Commons Lang's RandomStringUtils. Users are recommended to upgrade to version 1.6.0, which fixes this issue.

The attacker can use the raft server protocol in an unauthenticated way. The attacker can see the server's resources, including directories and files. This issue affects Apache Zeppelin: from 0.10.1 up to 0.12.0. Users are recommended to upgrade to version 0.12.0, which fixes the issue by removing the Cluster Interpreter.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Pinot. This issue affects Apache Pinot: from 0.1 before 1.0.0. Users are recommended to upgrade to version 1.0.0 and configure RBAC, which fixes the issue. Details:  When using a request to path “/appconfigs” to the controller, it can lead to the disclosure of sensitive information such as system information (e.g. arch, os version), environment information (e.g. maxHeapSize) and Pinot configurations (e.g. zookeeper path). This issue was addressed by the Role-based Access Control https://docs.pinot.apache.org/operators/tutorials/authentication/basic-auth-access-control , so that /appConfigs` and all other APIs can be access controlled. Only authorized users have access to it. Note the user needs to add the admin role accordingly to the RBAC guide to control access to this endpoint, and in the future version of Pinot, a default admin role is planned to be added.