avahi-core/socket.c in avahi-daemon in Avahi before 0.6.29 allows remote attackers to cause a denial of service (infinite loop) via an empty mDNS (1) IPv4 or (2) IPv6 UDP packet to port 5353. NOTE: this vulnerability exists because of an incorrect fix for CVE-2010-2244.

go-chart v2.1.1 was discovered to contain an infinite loop via the drawCanvas() function.

Stack consumption vulnerability in the dissect_ber_choice function in the BER dissector in Wireshark 1.2.x through 1.2.15 and 1.4.x through 1.4.4 might allow remote attackers to cause a denial of service (infinite loop) via vectors involving self-referential ASN.1 CHOICE values.

An issue was discovered in MultiPartParser in Django 2.2 before 2.2.27, 3.2 before 3.2.12, and 4.0 before 4.0.2. Passing certain inputs to multipart forms could result in an infinite loop when parsing files.

OFPHello in parser.py in Faucet SDN Ryu 4.34 allows attackers to cause a denial of service (infinite loop) via length=0.

Math/PrimeField.php in phpseclib 3.x before 3.0.19 has an infinite loop with composite primefields.

node-jose is a JavaScript implementation of the JSON Object Signing and Encryption (JOSE) for web browsers and node.js-based servers. Prior to version 2.2.0, when using the non-default "fallback" crypto back-end, ECC operations in `node-jose` can trigger a Denial-of-Service (DoS) condition, due to a possible infinite loop in an internal calculation. For some ECC operations, this condition is triggered randomly; for others, it can be triggered by malicious input. The issue has been patched in version 2.2.0. Since this issue is only present in the "fallback" crypto implementation, it can be avoided by ensuring that either WebCrypto or the Node `crypto` module is available in the JS environment where `node-jose` is being run.

Versions of the package asyncua before 0.9.96 are vulnerable to Denial of Service (DoS) such that an attacker can send a malformed packet and as a result, the server will enter into an infinite loop and consume excessive memory.

ngiflib.c in MiniUPnP ngiflib 0.4 has an infinite loop in DecodeGifImg and LoadGif.

Mod_gnutls is a TLS module for Apache HTTPD based on GnuTLS. Versions from 0.9.0 to 0.12.0 (including) did not properly fail blocking read operations on TLS connections when the transport hit timeouts. Instead it entered an endless loop retrying the read operation, consuming CPU resources. This could be exploited for denial of service attacks. If trace level logging was enabled, it would also produce an excessive amount of log output during the loop, consuming disk space. The problem has been fixed in commit d7eec4e598158ab6a98bf505354e84352f9715ec, please update to version 0.12.1. There are no workarounds, users who cannot update should apply the errno fix detailed in the security advisory.

OFPMultipartReply in parser.py in Faucet SDN Ryu 4.34 allows attackers to cause a denial of service (infinite loop) via b.length=0.

An issue was discovered in picoTCP and picoTCP-NG through 1.7.0. When an unsupported TCP option with zero length is provided in an incoming TCP packet, it is possible to cause a Denial-of-Service by achieving an infinite loop in the code that parses TCP options, aka tcp_parse_options() in pico_tcp.c.

A vulnerability was found in the way RemoteMessageChannel, introduced in jboss-remoting versions 3.3.10, reads from an empty buffer. An attacker could use this flaw to cause denial of service via high CPU caused by an infinite loop.

A denial of service vulnerability exists in the Web Application functionality of LevelOne WBR-6012 R0.40e6. A specially crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

A Denial of Service (infinite loop) exists in OpenSIPS before 1.10 in lookup.c.

An issue in OneFlow-Inc. Oneflow v0.9.1 allows attackers to cause a Denial of Service (DoS) when an empty array is processed with oneflow.tensordot.

OpenMage LTS is an e-commerce platform. Versions prior to 19.4.22 and 20.0.19 contain an infinite loop in malicious code filter in certain conditions. Versions 19.4.22 and 20.0.19 have a fix for this issue. There are no known workarounds.

OFPFlowStats in parser.py in Faucet SDN Ryu 4.34 allows attackers to cause a denial of service (infinite loop) via inst.length=0.

It was discovered that a programming error in the processing of HTTPS requests in the Apache Tomcat servlet and JSP engine may result in denial of service via an infinite loop. The denial of service is easily achievable as a consequence of backporting a CVE-2016-6816 fix but not backporting the fix for Tomcat bug 57544. Distributions affected by this backporting issue include Debian (before 7.0.56-3+deb8u8 and 8.0.14-1+deb8u7 in jessie) and Ubuntu.

Envoy is a cloud-native, open source edge and service proxy. Envoyproxy with a Brotli filter can get into an endless loop during decompression of Brotli data with extra input.

A vulnerability in the filesystem image parser for Hierarchical File System Plus (HFS+) of ClamAV could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an incorrect check for completion when a file is decompressed, which may result in a loop condition that could cause the affected software to stop responding. An attacker could exploit this vulnerability by submitting a crafted HFS+ filesystem image to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to stop responding, resulting in a DoS condition on the affected software and consuming available system resources. For a description of this vulnerability, see the ClamAV blog .

Improper file stream access in /desktop_app/file.ajax.php?action=uploadfile in Bitrix24 22.0.300 allows unauthenticated remote attackers to cause denial-of-service via a crafted "tmp_url".

Go before 1.13.15 and 14.x before 1.14.7 can have an infinite read loop in ReadUvarint and ReadVarint in encoding/binary via invalid inputs.

An issue was discovered in picoTCP 1.7.0. The routine for processing the next header field (and deducing whether the IPv6 extension headers are valid) doesn't check whether the header extension length field would overflow. Therefore, if it wraps around to zero, iterating through the extension headers will not increment the current data pointer. This leads to an infinite loop and Denial-of-Service in pico_ipv6_check_headers_sequence() in pico_ipv6.c.

Rustls is a modern TLS library written in Rust. `rustls::ConnectionCommon::complete_io` could fall into an infinite loop based on network input. When using a blocking rustls server, if a client send a `close_notify` message immediately after `client_hello`, the server's `complete_io` will get in an infinite loop. This vulnerability is fixed in 0.23.5, 0.22.4, and 0.21.11.

A flaw was found in undertow. This issue makes achieving a denial of service possible due to an unexpected handshake status updated in SslConduit, where the loop never terminates.

Trustwave ModSecurity 3.x through 3.0.4 allows denial of service via a special request. NOTE: The discoverer reports "Trustwave has signaled they are disputing our claims." The CVE suggests that there is a security issue with how ModSecurity handles regular expressions that can result in a Denial of Service condition. The vendor does not consider this as a security issue because1) there is no default configuration issue here. An attacker would need to know that a rule using a potentially problematic regular expression was in place, 2) the attacker would need to know the basic nature of the regular expression itself to exploit any resource issues. It's well known that regular expression usage can be taxing on system resources regardless of the use case. It is up to the administrator to decide on when it is appropriate to trade resources for potential security benefit

In Poppler 0.59.0, memory corruption occurs in a call to Object::dictLookup() in Object.h after a repeating series of Gfx::display, Gfx::go, Gfx::execOp, Gfx::opFill, Gfx::doPatternFill, Gfx::doTilingPatternFill and Gfx::drawForm calls (aka a Gfx.cc infinite loop), a different vulnerability than CVE-2017-14519.

In Wireshark 3.2.0 to 3.2.4, the GVCP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-gvcp.c by ensuring that an offset increases in all situations.

aiohttp is an asynchronous HTTP client/server framework for asyncio and Python. In affected versions an attacker can send a specially crafted POST (multipart/form-data) request. When the aiohttp server processes it, the server will enter an infinite loop and be unable to process any further requests. An attacker can stop the application from serving requests after sending a single request. This issue has been addressed in version 3.9.4. Users are advised to upgrade. Users unable to upgrade may manually apply a patch to their systems. Please see the linked GHSA for instructions.

The BMP image processor for (1) gdk-pixbuf before 0.22 and (2) gtk2 before 2.2.4 allows remote attackers to cause a denial of service (infinite loop) via a crafted BMP file.

Technitium DNS Server before 10.0 allows a self-CNAME denial-of-service attack in which a CNAME loop causes an answer to contain hundreds of records.

The x/text package before 0.3.3 for Go has a vulnerability in encoding/unicode that could lead to the UTF-16 decoder entering an infinite loop, causing the program to crash or run out of memory. An attacker could provide a single byte to a UTF16 decoder instantiated with UseBOM or ExpectBOM to trigger an infinite loop if the String function on the Decoder is called, or the Decoder is passed to golang.org/x/text/transform.String.

An issue was discovered in OFPMatch in parser.py in Faucet SDN Ryu version 4.34, allows remote attackers to cause a denial of service (DoS) (infinite loop).

In Poppler 0.59.0, memory corruption occurs in a call to Object::streamGetChar in Object.h after a repeating series of Gfx::display, Gfx::go, Gfx::execOp, Gfx::opShowText, and Gfx::doShowText calls (aka a Gfx.cc infinite loop).

There is an infinite loop in the jpc_dec_tileinit function in jpc/jpc_dec.c of Jasper 2.0.13. It will lead to a remote denial of service attack.

In ElementaryStreamQueue::dequeueAccessUnitMPEG4Video of ESQueue.cpp, there is a possible infinite loop leading to resource exhaustion due to an incorrect bounds check. This could lead to remote denial of service with no additional execution privileges needed. User interaction is needed for exploitation.

The LLDP parser in tcpdump before 4.9.2 could enter an infinite loop due to a bug in print-lldp.c:lldp_private_8021_print().

A flaw was found in libXpm. This issue occurs when parsing a file with a comment not closed; the end-of-file condition will not be detected, leading to an infinite loop and resulting in a Denial of Service in the application linked to the library.

The DNS parser in tcpdump before 4.9.2 could enter an infinite loop due to a bug in print-domain.c:ns_print().

The RESP parser in tcpdump before 4.9.2 could enter an infinite loop due to a bug in print-resp.c:resp_get_length().

The ISAKMP parser in tcpdump before 4.9.2 could enter an infinite loop due to bugs in print-isakmp.c, several functions.

CodeIgniter is a PHP full-stack web framework A vulnerability was found in the Language class that allowed DoS attacks. This vulnerability can be exploited by an attacker to consume a large amount of memory on the server. Upgrade to v4.4.7 or later.

Apache POI in versions prior to release 3.17 are vulnerable to Denial of Service Attacks: 1) Infinite Loops while parsing crafted WMF, EMF, MSG and macros (POI bugs 61338 and 61294), and 2) Out of Memory Exceptions while parsing crafted DOC, PPT and XLS (POI bugs 52372 and 61295).

A flaw was found in libXpm. When processing a file with width of 0 and a very large height, some parser functions will be called repeatedly and can lead to an infinite loop, resulting in a Denial of Service in the application linked to the library.

The numpy.pad function in Numpy 1.13.1 and older versions is missing input validation. An empty list or ndarray will stick into an infinite loop, which can allow attackers to cause a DoS attack.

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Apache NimBLE.  Specially crafted GATT operation can cause infinite loop in GATT server leading to denial of service in Bluetooth stack or device. This issue affects Apache NimBLE: through 1.6.0. Users are recommended to upgrade to version 1.7.0, which fixes the issue.

There is a defect in the CPython “tarfile” module affecting the “TarFile” extraction and entry enumeration APIs. The tar implementation would process tar archives with negative offsets without error, resulting in an infinite loop and deadlock during the parsing of maliciously crafted tar archives. This vulnerability can be mitigated by including the following patch after importing the “tarfile” module:  https://gist.github.com/sethmlarson/1716ac5b82b73dbcbf23ad2eff8b33e1

Certain WithSecure products allow a Denial of Service because the engine scanner can go into an infinite loop when processing an archive file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, WithSecure Linux Security 64 12.0, WithSecure Linux Protection 12.0, and WithSecure Atlant 1.0.35-1.

Transient DOS when NAS receives ODAC criteria of length 1 and type 1 in registration accept OTA.