It was discovered that the Magritte-ftp was not verifying hostnames in TLS certificates due to a misuse of the javax.net.ssl.SSLSocketFactory API. A malicious attacker in a privileged network position could abuse this to perform a man-in-the-middle attack. A successful man-in-the-middle attack would allow them to intercept, read, or modify network communications to and from the affected service. In the case of a successful man in the middle attack on magritte-ftp, an attacker would be able to read and modify network traffic such as authentication tokens or raw data entering a Palantir Foundry stack.

It was discovered that the sls-logging was not verifying hostnames in TLS certificates due to a misuse of the javax.net.ssl.SSLSocketFactory API. A malicious attacker in a privileged network position could abuse this to perform a man-in-the-middle attack. A successful man-in-the-middle attack would allow them to intercept, read, or modify network communications to and from the affected service.

Improper Validation of Certificate with Host Mismatch vulnerability in Gotham Chat IRC helper of Palantir Gotham allows A malicious attacker in a privileged network position could abuse this to perform a man-in-the-middle attack. A successful man-in-the-middle attack would allow them to intercept, read, or modify network communications to and from the affected service. This issue affects: Palantir Palantir Gotham Chat IRC helper versions prior to 30221005.210011.9242.

An Improper Certificate Validation weakness in the SRX Series Application Identification (app-id) signature update client of Juniper Networks Junos OS allows an attacker to perform Man-in-the-Middle (MitM) attacks which may compromise the integrity and confidentiality of the device. This issue affects: Juniper Networks Junos OS 15.1X49 versions prior to 15.1X49-D120 on SRX Series devices. No other versions of Junos OS are affected.

A vulnerability exists in the component RTU500 Scripting interface. When a client connects to a server using TLS, the server presents a certificate. This certificate links a public key to the identity of the service and is signed by a Certification Authority (CA), allowing the client to validate that the remote service can be trusted and is not malicious. If the client does not validate the parameters of the certificate, then attackers could be able to spoof the identity of the service. An attacker could exploit the vulnerability by using faking the identity of a RTU500 device and intercepting the messages initiated via the RTU500 Scripting interface.

A vulnerability exists in the FOXMAN-UN/UNEM server that affects the message queueing mechanism’s certificate validation. If exploited an attacker could spoof a trusted entity causing a loss of confidentiality and integrity.

lib/oauth/consumer.rb in the oauth-ruby gem through 0.5.4 for Ruby does not verify server X.509 certificates if a certificate bundle cannot be found, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information.

Improper Certificate Validation in GitHub repository pyload/pyload prior to 0.5.0b3.dev44.

Due to improper validation of certificate in SAP Cloud Connector - version 2.0, attacker can impersonate the genuine servers to interact with SCC breaking the mutual authentication. Hence, the attacker can intercept the request to view/modify sensitive information. There is no impact on the availability of the system.

F5 Access for Android before version 3.1.2 which uses HTTPS does not verify the remote endpoint identity. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A vulnerability has been discovered in Bitdefender Total Security HTTPS scanning functionality that results in the improper trust of self-signed certificates. The product is found to trust certificates signed with the RIPEMD-160 hashing algorithm without proper validation, allowing an attacker to establish MITM SSL connections to arbitrary sites.

A vulnerability has been discovered in Bitdefender Total Security HTTPS scanning functionality that results in the improper trust of certificates issued using the DSA signature algorithm. The product does not properly check the certificate chain, allowing an attacker to establish MITM SSL connections to arbitrary sites using a DSA-signed certificate.

A vulnerability has been identified in Bitdefender Total Security HTTPS scanning functionality where the software fails to properly validate website certificates. Specifically, if a site certificate lacks the "Server Authentication" specification in the Extended Key Usage extension, the product does not verify the certificate's compliance with the site, deeming such certificates as valid. This flaw could allow an attacker to perform a Man-in-the-Middle (MITM) attack, intercepting and potentially altering communications between the user and the website.

An improper certificate validation issue in Smartcard authentication in GitLab EE affecting all versions from 11.6 prior to 16.4.4, 16.5 prior to 16.5.4, and 16.6 prior to 16.6.2 allows an attacker to authenticate as another user given their public key if they use Smartcard authentication. Smartcard authentication is an experimental feature and has to be manually enabled by an administrator.

Improper certificate validation in Zoom Workplace for Linux before version 6.4.13 may allow an unauthorized user to conduct an information disclosure via network access.

An improper certificate validation vulnerability [CWE-295] in FortiADC 7.4.0, 7.2.0 through 7.2.3, 7.1 all versions, 7.0 all versions, 6.2 all versions, 6.1 all versions and 6.0 all versions may allow a remote and unauthenticated attacker to perform a Man-in-the-Middle attack on the communication channel between the device and various remote servers such as private SDN connectors and FortiToken Cloud.

A vulnerability has been identified in Bitdefender Total Security HTTPS scanning functionality where the software trusts a certificate issued by an entity that isn't authorized to issue certificates. This occurs when the "Basic Constraints" extension in the certificate indicates that it is meant to be an "End Entity”. This flaw could allow an attacker to perform a Man-in-the-Middle (MITM) attack, intercepting and potentially altering communications between the user and the website.

Missing SSL certificate validation in localstack v2.3.2 allows attackers to eavesdrop on communications between the host and server via a man-in-the-middle attack.

A vulnerability has been identified in SINUMERIK Analyse MyCondition (All versions), SINUMERIK Analyze MyPerformance (All versions), SINUMERIK Analyze MyPerformance /OEE-Monitor (All versions), SINUMERIK Analyze MyPerformance /OEE-Tuning (All versions), SINUMERIK Integrate Client 02 (All versions >= V02.00.12 < 02.00.18), SINUMERIK Integrate Client 03 (All versions >= V03.00.12 < 03.00.18), SINUMERIK Integrate Client 04 (V04.00.02 and all versions >= V04.00.15 < 04.00.18), SINUMERIK Integrate for Production 4.1 (All versions < V4.1 SP10 HF3), SINUMERIK Integrate for Production 5.1 (V5.1), SINUMERIK Manage MyMachines (All versions), SINUMERIK Manage MyMachines /Remote (All versions), SINUMERIK Manage MyMachines /Spindel Monitor (All versions), SINUMERIK Manage MyPrograms (All versions), SINUMERIK Manage MyResources /Programs (All versions), SINUMERIK Manage MyResources /Tools (All versions), SINUMERIK Manage MyTools (All versions), SINUMERIK Operate V4.8 (All versions < V4.8 SP8), SINUMERIK Operate V4.93 (All versions < V4.93 HF7), SINUMERIK Operate V4.94 (All versions < V4.94 HF5), SINUMERIK Optimize MyProgramming /NX-Cam Editor (All versions). Due to an error in a third-party dependency the ssl flags used for setting up a TLS connection to a server are overwitten with wrong settings. This results in a missing validation of the server certificate and thus in a possible TLS MITM szenario.

A vulnerability was found in the Hot Rod client. This security issue occurs as the Hot Rod client does not enable hostname validation when using TLS, possibly resulting in a man-in-the-middle (MITM) attack.

WP-CLI is the command-line interface for WordPress. An improper error handling in HTTPS requests management in WP-CLI version 0.12.0 and later allows remote attackers able to intercept the communication to remotely disable the certificate verification on WP-CLI side, gaining full control over the communication content, including the ability to impersonate update servers and push malicious updates towards WordPress instances controlled by the vulnerable WP-CLI agent, or push malicious updates toward WP-CLI itself. The vulnerability stems from the fact that the default behavior of `WP_CLI\Utils\http_request()` when encountering a TLS handshake error is to disable certificate validation and retry the same request. The default behavior has been changed with version 2.5.0 of WP-CLI and the `wp-cli/wp-cli` framework (via https://github.com/wp-cli/wp-cli/pull/5523) so that the `WP_CLI\Utils\http_request()` method accepts an `$insecure` option that is `false` by default and consequently that a TLS handshake failure is a hard error by default. This new default is a breaking change and ripples through to all consumers of `WP_CLI\Utils\http_request()`, including those in separate WP-CLI bundled or third-party packages. https://github.com/wp-cli/wp-cli/pull/5523 has also added an `--insecure` flag to the `cli update` command to counter this breaking change. There is no direct workaround for the default insecure behavior of `wp-cli/wp-cli` versions before 2.5.0. The workaround for dealing with the breaking change in the commands directly affected by the new secure default behavior is to add the `--insecure` flag to manually opt-in to the previous insecure behavior.

core/imap/MCIMAPSession.cpp in Canary Mail before 3.22 has Missing SSL Certificate Validation for IMAP in STARTTLS mode.

Using the ability to perform a Man-in-the-Middle (MITM) attack, which indicates a lack of hostname verification, sensitive account information was able to be intercepted. In this specific scenario, the application's network traffic was intercepted using a proxy server set up in 'transparent' mode while a certificate with an invalid hostname was active. The Android application was found to have hostname verification issues during the server setup and login flows; however, the application did not process requests post-login.

The SSLVerifySignedServerKeyExchange function in libsecurity_ssl/lib/sslKeyExchange.c in the Secure Transport feature in the Data Security component in Apple iOS 6.x before 6.1.6 and 7.x before 7.0.6, Apple TV 6.x before 6.0.2, and Apple OS X 10.9.x before 10.9.2 does not check the signature in a TLS Server Key Exchange message, which allows man-in-the-middle attackers to spoof SSL servers by (1) using an arbitrary private key for the signing step or (2) omitting the signing step.

Dell EMC Unisphere for PowerMax versions before 9.1.0.27, Dell EMC Unisphere for PowerMax Virtual Appliance versions before 9.1.0.27, and PowerMax OS Release 5978 contain an improper certificate validation vulnerability. An unauthenticated remote attacker may potentially exploit this vulnerability to carry out a man-in-the-middle attack by supplying a crafted certificate and intercepting the victim's traffic to view or modify a victim’s data in transit.

Mifos-Mobile Android Application for MifosX is an Android Application built on top of the MifosX Self-Service platform. Mifos-Mobile before commit e505f62 disables HTTPS hostname verification of its HTTP client. Additionally it accepted any self-signed certificate as valid. Hostname verification is an important part when using HTTPS to ensure that the presented certificate is valid for the host. Disabling it can allow for man-in-the-middle attacks. Accepting any certificate, even self-signed ones allows man-in-the-middle attacks. This problem is fixed in mifos-mobile commit e505f62.

A vulnerability in the Cisco Advanced Malware Protection (AMP) for Endpoints integration of Cisco AsyncOS for Cisco Email Security Appliance (ESA) and Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to intercept traffic between an affected device and the AMP servers. This vulnerability is due to improper certificate validation when an affected device establishes TLS connections. A man-in-the-middle attacker could exploit this vulnerability by sending a crafted TLS packet to an affected device. A successful exploit could allow the attacker to spoof a trusted host and then extract sensitive information or alter certain API requests.

A vulnerability in the Cisco Identity Services Engine (ISE) integration feature of the Cisco DNA Center Software could allow an unauthenticated, remote attacker to gain unauthorized access to sensitive data. The vulnerability is due to an incomplete validation of the X.509 certificate used when establishing a connection between DNA Center and an ISE server. An attacker could exploit this vulnerability by supplying a crafted certificate and could then intercept communications between the ISE and DNA Center. A successful exploit could allow the attacker to view and alter sensitive information that the ISE maintains about clients that are connected to the network.

A vulnerability has been identified in Industrial Edge Management (All versions < V1.5.1). The affected software does not properly validate the server certificate when initiating a TLS connection. This could allow an attacker to spoof a trusted entity by interfering in the communication path between the client and the intended server.

FilesAnywhere does not verify that the server hostname matches a domain name in the subject's Common Name (CN) or subjectAltName field of the X.509 certificate, which allows man-in-the-middle attackers to spoof SSL servers via an arbitrary valid certificate.

Codehaus XFire 1.2.6 and earlier, as used in the Amazon EC2 API Tools Java library and other products, does not verify that the server hostname matches a domain name in the subject's Common Name (CN) or subjectAltName field of the X.509 certificate, which allows man-in-the-middle attackers to spoof SSL servers via an arbitrary valid certificate.

A flaw was found in libnbd. The client did not always correctly verify the NBD server's certificate when using TLS to connect to an NBD server. This issue allows a man-in-the-middle attack on NBD traffic.

Missing validation of server certificates for out-going connections in Nextcloud Social < 0.4.0 allowed a man-in-the-middle attack.

When AdaCore Ada Web Server 25.0.0 is linked with GnuTLS, the default behaviour of AWS.Client is vulnerable to a man-in-the-middle attack because of lack of verification of an HTTPS server's certificate (unless the using program specifies a TLS configuration).

Improper handling and storage of certificates in CP Plus CP-VNR-3104 B3223P22C02424 allow attackers to decrypt communications or execute a man-in-the-middle attacks.

TLS session reuse can lead to host certificate verification bypass in node version < 12.18.0 and < 14.4.0.

The httplib and urllib Python libraries that Splunk shipped with Splunk Enterprise did not validate certificates using the certificate authority (CA) certificate stores by default in Splunk Enterprise versions before 9.0 and Splunk Cloud Platform versions before 8.2.2203. Python 3 client libraries now verify server certificates by default and use the appropriate CA certificate stores for each library. Apps and add-ons that include their own HTTP libraries are not affected. For Splunk Enterprise, update to Splunk Enterprise version 9.0 and Configure TLS host name validation for Splunk-to-Splunk communications (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation) to enable the remediation.

In Splunk Enterprise and Universal Forwarder versions before 9.0, the Splunk command-line interface (CLI) did not validate TLS certificates while connecting to a remote Splunk platform instance by default. After updating to version 9.0, see Configure TLS host name validation for the Splunk CLI https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation#Configure_TLS_host_name_validation_for_the_Splunk_CLI to enable the remediation. The vulnerability does not affect the Splunk Cloud Platform. At the time of publishing, we have no evidence of exploitation of this vulnerability by external parties. The issue requires conditions beyond the control of a potential bad actor such as a machine-in-the-middle attack. Hence, Splunk rates the complexity of the attack as High.

Improper certificate validation for certain connections in the Bosch Smart Home System App for iOS prior to version 9.17.1 potentially allows to intercept video contents by performing a man-in-the-middle attack.

In versions of NGINX Controller prior to 3.2.0, communication between NGINX Controller and NGINX Plus instances skip TLS verification by default.

A flaw was found in the python-scciclient when making an HTTPS connection to a server where the server's certificate would not be verified. This issue opens up the connection to possible Man-in-the-middle (MITM) attacks.

The kantan netprint App for Android 2.0.3 and earlier does not verify X.509 certificates from servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

A vulnerability in the SSL/TLS implementation of Cisco Nexus Dashboard could allow an unauthenticated, remote attacker to alter communications with associated controllers or view sensitive information. This vulnerability exists because SSL server certificates are not validated when Cisco Nexus Dashboard is establishing a connection to Cisco Application Policy Infrastructure Controller (APIC), Cisco Cloud APIC, or Cisco Nexus Dashboard Fabric Controller, formerly Data Center Network Manager (DCNM) controllers. An attacker could exploit this vulnerability by using man-in-the-middle techniques to intercept the traffic between the affected device and the controllers, and then using a crafted certificate to impersonate the controllers. A successful exploit could allow the attacker to alter communications between devices or view sensitive information, including Administrator credentials for these controllers.

Missing SSL certificate validation in HTTPie v3.2.2 allows attackers to eavesdrop on communications between the host and server via a man-in-the-middle attack.

An Improper Certificate Validation weakness in the Juniper Networks Junos OS allows an attacker to perform Person-in-the-Middle (PitM) attacks when a system script is fetched from a remote source at a specified HTTPS URL, which may compromise the integrity and confidentiality of the device. The following command can be executed by an administrator via the CLI to refresh a script from a remote location, which is affected from this vulnerability: >request system scripts refresh-from (commit | event | extension-service | op | snmp) file filename url <https-url> This issue affects: Juniper Networks Junos OS All versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R3-S7; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3; 20.3 versions prior to 20.3R2-S1, 20.3R3; 20.4 versions prior to 20.4R2; 21.1 versions prior to 21.1R1-S1, 21.1R2.

Envoy is an open source edge and service proxy, designed for cloud-native applications. The default_validator.cc implementation used to implement the default certificate validation routines has a "type confusion" bug when processing subjectAltNames. This processing allows, for example, an rfc822Name or uniformResourceIndicator to be authenticated as a domain name. This confusion allows for the bypassing of nameConstraints, as processed by the underlying OpenSSL/BoringSSL implementation, exposing the possibility of impersonation of arbitrary servers. As a result Envoy will trust upstream certificates that should not be trusted.

The contribution feature in Zamboni does not verify that the server hostname matches a domain name in the subject's Common Name (CN) or subjectAltName field of the X.509 certificate, which allows man-in-the-middle attackers to spoof SSL servers via an arbitrary valid certificate, related to use of the Python urllib2 library.

Envoy is an open source edge and service proxy, designed for cloud-native applications. Envoy's tls allows re-use when some cert validation settings have changed from their default configuration. The only workaround for this issue is to ensure that default tls settings are used. Users are advised to upgrade.

Accepting arbitrary Subject Alternative Name (SAN) types, unless a PKI is specifically defined to use a particular SAN type, can result in bypassing name-constrained intermediates. Node.js < 12.22.9, < 14.18.3, < 16.13.2, and < 17.3.1 was accepting URI SAN types, which PKIs are often not defined to use. Additionally, when a protocol allows URI SANs, Node.js did not match the URI correctly.Versions of Node.js with the fix for this disable the URI SAN type when checking a certificate against a hostname. This behavior can be reverted through the --security-revert command-line option.

e2guardian v5.4.x <= v5.4.3r is affected by missing SSL certificate validation in the SSL MITM engine. In standalone mode (i.e., acting as a proxy or a transparent proxy), with SSL MITM enabled, e2guardian, if built with OpenSSL v1.1.x, did not validate hostnames in certificates of the web servers that it connected to, and thus was itself vulnerable to MITM attacks.