A use of hard-coded cryptographic key vulnerability in the SSLVPN of FortiOS before 7.0.1 may allow an attacker to retrieve the key by reverse engineering.

NVIDIA DGX servers, all BMC firmware versions prior to 3.38.30, contain a vulnerability in the AMI BMC firmware in which it uses a hard-coded RC4 cipher key, which may lead to information disclosure.

An issue was discovered in Programi Bilanc build 007 release 014 31.01.2020 and possibly below. It relies on broken encryption with a weak and guessable static encryption key.

Cisco IP Phone (VoIP) 7920 1.0(8) contains certain hard-coded ("fixed") public and private SNMP community strings that cannot be changed, which allows remote attackers to obtain sensitive information.

Usage of hard-coded cryptographic keys to encrypt configuration files and debug logs in FortiAuthenticator versions before 6.3.0 may allow an attacker with access to the files or the CLI configuration to decrypt the sensitive data, via knowledge of the hard-coded key.

Ovarro TBox TWinSoft uses the custom hardcoded user “TWinSoft” with a hardcoded key.

NVIDIA DGX servers, DGX-1 with BMC firmware versions prior to 3.38.30. DGX-2 with BMC firmware versions prior to 1.06.06 and all DGX A100 Servers with all BMC firmware versions, contains a vulnerability in the AMI BMC firmware in which the use of a hard-coded RSA 1024 key with weak ciphers may lead to information disclosure.

Retty App for Android versions prior to 4.8.13 and Retty App for iOS versions prior to 4.11.14 uses a hard-coded API key for an external service. By exploiting this vulnerability, API key for an external service may be obtained by analyzing data in the app.

Use of a hard-coded password for a special database account created during Comarch ERP XL installation allows an attacker to retrieve embedded sensitive data stored in the database. The password is same among all Comarch ERP XL installations. This issue affects ERP XL: from 2020.2.2 through 2023.2.

Moog EXO Series EXVF5C-2 and EXVP7C2-3 units have a hardcoded credentials vulnerability. This could cause a confidentiality issue when using the FTP, Telnet, or SSH protocols.

IBM Security Verify Bridge contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 196618.

A Security Bypass vulnerability exists in TP-LINK IP Cameras TL-SC 3130, TL-SC 3130G, 3171G, 4171G, and 3130 1.6.18P12 due to default hard-coded credentials for the administrative Web interface, which could let a malicious user obtain unauthorized access to CGI files.

Delta Industrial Automation DIALink versions 1.4.0.0 and prior are vulnerable to the use of a hard-coded cryptographic key which could allow an attacker to decrypt sensitive data and compromise the machine.

PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices contain a hardcoded certificate (and key) that is used by default for web-based services on the device. Impersonation, man-in-the-middle, or passive decryption attacks are possible if the generic certificate is not replaced by a device-specific certificate during installation.

Use of a hard-coded cryptographic key to encrypt password data in CLI configuration in FortiManager 6.2.3 and below, FortiAnalyzer 6.2.3 and below may allow an attacker with access to the CLI configuration or the CLI backup file to decrypt the sensitive data, via knowledge of the hard-coded key.

An Authentication Bypass vulnerability exists in the web interface in Zavio IP Cameras through 1.6.03 due to a hardcoded admin account found in boa.conf, which lets a remote malicious user obtain sensitive information.

ZTE E8810/E8820/E8822 series routers have an information leak vulnerability, which is caused by hard-coded MQTT service access credentials on the device. The remote attacker could use this credential to connect to the MQTT server, so as to obtain information about other devices by sending specific topics. This affects:<ZXHN E8810, ZXHN E8820, ZXHN E8822><E8810 V1.0.26, E8810 V2.0.1, E8820 V1.1.3L, E8820 V2.0.13, E8822 V2.0.13>

An issue was discovered in Aviatrix Controller before 5.4.1204. It contains credentials unused by the software.

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, the affected products use a hard-coded cryptographic key, increasing the possibility that confidential data can be recovered.

SonicOS Use of Hard-coded Password vulnerability in the 'dynHandleBuyToolbar' demo function.

RunAsSpc 4.0 uses a universal and recoverable encryption key. In possession of a file encrypted by RunAsSpc, an attacker can recover the credentials that were used.

In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the affected products use a hard-coded cryptographic key, which increases the possibility that confidential data can be recovered.

Dell EMC OpenManage Integration for Microsoft System Center (OMIMSSC) for SCCM and SCVMM versions prior to 7.2.1 contain a hard-coded cryptographic key vulnerability. A remote unauthenticated attacker may exploit this vulnerability to gain access to the appliance data for remotely managed devices.

IBM Data Risk Manager (iDNA) 2.0.6 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 184983.

IBM QRadar Network Security 5.4.0 and 5.5.0 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 174337.

A vulnerability has been discovered in the firmware of Paxton Paxton10 before 4.6 SR6. The firmware file, rootfs.tar.gz, contains hard-coded credentials for the Twilio API. A remote attacker who obtains a copy of the firmware can extract these credentials. This could allow the attacker to gain unauthorized access to the associated Twilio account, leading to information disclosure, potential service disruption, and unauthorized use of the Twilio services.

IBM QRadar 7.3.0 to 7.3.3 Patch 2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-ForceID: 175845.

An issue in xui-xray v1.8.3 allows attackers to obtain sensitive information via default password.

The MobileIron agents through 2021-03-22 for Android and iOS contain a hardcoded API key, used to communicate with the MobileIron SaaS discovery API, as demonstrated by Mobile@Work (aka com.mobileiron). The key is in com/mobileiron/registration/RegisterActivity.java and can be used for api/v1/gateway/customers/servers requests. NOTE: Vendor states that this is an opt-in feature to the product - it is not enabled by default and customers cannot enable it without an explicit email to support. At this time, they do not plan change to make any changes to this feature.

ThinkAdmin v6 has default administrator credentials, which allows attackers to gain unrestricted administratior dashboard access.

A vulnerability has been identified in MXsecurity versions prior to v1.0.1. The vulnerability may put the confidentiality and integrity of SSH communications at risk on the affected device. This vulnerability is attributed to a hard-coded SSH host key, which might facilitate man-in-the-middle attacks and enable the decryption of SSH traffic.

The D-Link router DIR-880L 1.07 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

The D-link router DIR-885L-MFC 1.15b02, v1.21b05 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

The D-Link router DIR-868L 3.01 is vulnerable to credentials disclosure in telnet service through decompilation of firmware, that allows an unauthenticated attacker to gain access to the firmware and to extract sensitive data.

An issue was discovered on Athom Homey and Homey Pro devices before 5.0.0. ZigBee hub devices should generate a unique Standard Network Key that is then exchanged with all enrolled devices so that all inter-device communication is encrypted. However, the cited Athom products use another widely known key that is designed for testing purposes: "01030507090b0d0f00020406080a0c0d" (the decimal equivalent of 1 3 5 7 9 11 13 15 0 2 4 6 8 10 12 13), which is human generated and static across all issued devices.

Use of Hard-coded Credentials vulnerability in PAVO Inc. PAVO Pay allows Read Sensitive Constants Within an Executable.This issue affects PAVO Pay: before 13.05.2025.

IBM Concert Software 1.0.0 through 1.1.0 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.

Oclean Mobile Application 2.1.2 communicates with an external website using HTTP so it is possible to eavesdrop the network traffic. The content of HTTP payload is encrypted using XOR with a hardcoded key, which allows for the possibility to decode the traffic.

FlyteAdmin is the control plane for the data processing platform Flyte. Users who enable the default Flyte’s authorization server without changing the default clientid hashes will be exposed to the public internet. In an effort to make enabling authentication easier for Flyte administrators, the default configuration for Flyte Admin allows access for Flyte Propeller even after turning on authentication via a hardcoded hashed password. This password is also set on the default Flyte Propeller configmap in the various Flyte Helm charts. Users who enable auth but do not override this setting in Flyte Admin’s configuration may unbeknownst to them be allowing public traffic in by way of this default password with attackers effectively impersonating propeller. This only applies to users who have not specified the ExternalAuthorizationServer setting. Usage of an external auth server automatically turns off this default configuration and are not susceptible to this vulnerability. This issue has been addressed in version 1.1.44. Users should manually set the staticClients in the selfAuthServer section of their configuration if they intend to rely on Admin’s internal auth server. Again, users who use an external auth server are automatically protected from this vulnerability.

A CWE-798: Use of Hardcoded Credentials vulnerability exists in Modicon Controllers (All versions of the following CPUs and Communication Module product references listed in the Security Notifications), which could cause the disclosure of FTP hardcoded credentials when using the Web server of the controller on an unsecure network.

bilde2910 Hauk v1.6.1 requires a hardcoded password which by default is blank. This hardcoded password is hashed but stored within the config.php file server-side as well as in clear-text on the android client device by default.

Premisys Identicard version 3.1.190 stores user credentials and other sensitive information with a known weak encryption method (MD5 hash of a salt and password).

"HCL AppScan Enterprise uses hard-coded credentials which can be exploited by attackers to get unauthorized access to application's encrypted files."

The usage of hard-coded cryptographic keys within the ServiceAgent binary allows for the decryption of captured traffic across the network from or to the Moxa AWK-3131A firmware version 1.13.

Premisys Identicard version 3.1.190 stores backup files as encrypted zip files. The password to the zip is hard-coded and unchangeable. An attacker with access to these backups can decrypt them and obtain sensitive data.

An issue was discovered in Scytl sVote 2.1. Due to the implementation of the database manager, an attacker can access the OrientDB by providing admin as the admin password. A different password cannot be set because of the implementation in code.

An issue in Automatic Systems SOC FL9600 FirstLane V06 lego_T04E00 allows a remote attacker to obtain sensitive information because there is an automaticsystems super admin account with astech as its hardcoded password.

`tktchurch/website` contains the codebase for The King's Temple Church website. In version 0.1.0, a Stripe API key was found in the public code repository of the church's project. This sensitive information was unintentionally committed and subsequently exposed in the codebase. If an unauthorized party gains access to this key, they could potentially carry out transactions on behalf of the organization, leading to financial losses. Additionally, they could access sensitive customer information, leading to privacy violations and potential legal implications. The affected component is the codebase of our project, specifically the file(s) where the Stripe API key is embedded. The key should have been stored securely, and not committed to the codebase. The maintainers plan to revoke the leaked Stripe API key immediately, generate a new one, and not commit the key to the codebase.

Zoho ManageEngine Remote Access Plus before 10.1.2121.1 has hardcoded credentials associated with resetPWD.xml.

Use of Hard-coded Password vulnerability in Mitsubishi Electric Corporation GX Works3 versions from 1.015R to 1.095Z allows a remote unauthenticated attacker to obtain information about the project file for MELSEC safety CPU modules.