The Omron SYSMAC Nx product family PLCs (NJ series, NY series, NX series, and PMAC series) through 2022-005-18 lack cryptographic authentication. These PLCs are programmed using the SYMAC Studio engineering software (which compiles IEC 61131-3 conformant POU code to native machine code for execution by the PLC's runtime). The resulting machine code is executed by a runtime, typically controlled by a real-time operating system. The logic that is downloaded to the PLC does not seem to be cryptographically authenticated, allowing an attacker to manipulate transmitted object code to the PLC and execute arbitrary machine code on the processor of the PLC's CPU module in the context of the runtime. In the case of at least the NJ series, an RTOS and hardware combination is used that would potentially allow for memory protection and privilege separation and thus limit the impact of code execution. However, it was not confirmed whether these sufficiently segment the runtime from the rest of the RTOS.

OMRON CX-Programmer 9.78 and prior is vulnerable to an Out-of-Bounds Write, which may allow an attacker to execute arbitrary code.

OMRON CX-Programmer 9.78 and prior is vulnerable to an Out-of-Bounds Write, which may allow an attacker to execute arbitrary code.

OMRON CX-Programmer 9.78 and prior is vulnerable to an Out-of-Bounds Write, which may allow an attacker to execute arbitrary code.

FINS (Factory Interface Network Service) is a message communication protocol, which is designed to be used in closed FA (Factory Automation) networks, and is used in FA networks composed of OMRON products. Multiple OMRON products that implement FINS protocol contain following security issues -- (1)Plaintext communication, and (2)No authentication required. When FINS messages are intercepted, the contents may be retrieved. When arbitrary FINS messages are injected, any commands may be executed on, or the system information may be retrieved from, the affected device. Affected products and versions are as follows: SYSMAC CS-series CPU Units, all versions, SYSMAC CJ-series CPU Units, all versions, SYSMAC CP-series CPU Units, all versions, SYSMAC NJ-series CPU Units, all versions, SYSMAC NX1P-series CPU Units, all versions, SYSMAC NX102-series CPU Units, all versions, and SYSMAC NX7 Database Connection CPU Units (Ver.1.16 or later)

Active debug code exists in OMRON CP1L-EL20DR-D all versions, which may lead to a command that is not specified in FINS protocol being executed without authentication. A remote unauthenticated attacker may read/write in arbitrary area of the device memory, which may lead to overwriting the firmware, causing a denial-of-service (DoS) condition, and/or arbitrary code execution.

In Omron PLC CJ series, all versions and Omron PLC CS series, all versions, an attacker could spoof arbitrary messages or execute commands.

In Omron PLC CS series, all versions, Omron PLC CJ series, all versions, and Omron PLC NJ series, all versions, the software does not implement sufficient measures to prevent multiple failed authentication attempts within in a short time frame, making it more susceptible to brute force attacks.

Omron’s CS and CJ series PLCs have an unrestricted externally accessible lock vulnerability.

It was discovered that uscan, a tool to scan/watch upstream sources for new releases of software, included in devscripts (a collection of scripts to make the life of a Debian Package maintainer easier), skips OpenPGP verification if the upstream source is already downloaded from a previous run even if the verification failed back then.

In Gentoo Portage before 3.0.47, there is missing PGP validation of executed code: the standalone emerge-webrsync downloads a .gpgsig file but does not perform signature verification. Unless emerge-webrsync is used, Portage is not vulnerable.

An issue was discovered in the libsecp256k1 crate before 0.5.0 for Rust. It can verify an invalid signature because it allows the R or S parameter to be larger than the curve order, aka an overflow.

In the CryptX module before 0.062 for Perl, gcm_decrypt_verify() and chacha20poly1305_decrypt_verify() do not verify the tag.

A vulnerability exists in Rockwell Automation FactoryTalk® Service Platform that allows a malicious user to obtain the service token and use it for authentication on another FTSP directory. This is due to the lack of digital signing between the FTSP service token and directory.  If exploited, a malicious user could potentially retrieve user information and modify settings without any authentication.

The update process in OMICRON StationGuard and OMICRON StationScout before 2.21 can be exploited by providing a modified firmware update image. This allows a remote attacker to gain root access to the system.

Zoho ManageEngine ADManager Plus version 7110 and prior allows account takeover via SSO.

Dell BSAFE Crypto-C Micro Edition, versions before 4.1.5, and Dell BSAFE Micro Edition Suite, versions before 4.5.2, contain an Improper Input Validation Vulnerability.

An Improper Verification of Cryptographic Signature vulnerability in the update process of Korenix JetNet Series allows replacing the whole operating system including Trusted Executables. This issue affects JetNet devices older than firmware version 2024/01.

A flaw was found in keylime 5.8.1 and older. The issue in the Keylime agent and registrar code invalidates the cryptographic chain of trust from the Endorsement Key certificate to agent attestations.

Versions of OpenPubkey library prior to 0.10.0 contained a vulnerability that would allow a specially crafted JWS to bypass signature verification. As OPKSSH depends on the OpenPubkey library for authentication, this vulnerability in OpenPubkey also applies to OPKSSH versions prior to 0.5.0 and would allow an attacker to bypass OPKSSH authentication.

An Insufficient Verification of Data Authenticity vulnerability in B. Braun SpaceCom2 prior to 012U000062 allows a remote unauthenticated attacker to send the device malicious data that will be used in place of the correct data. This results in full system command access and execution because of the lack of cryptographic signatures on critical data sets.

tEnvoy contains the PGP, NaCl, and PBKDF2 in node.js and the browser (hashing, random, encryption, decryption, signatures, conversions), used by TogaTech.org. In versions prior to 7.0.3, the `verifyWithMessage` method of `tEnvoyNaClSigningKey` always returns `true` for any signature that has a SHA-512 hash matching the SHA-512 hash of the message even if the signature was invalid. This issue is patched in version 7.0.3. As a workaround: In `tenvoy.js` under the `verifyWithMessage` method definition within the `tEnvoyNaClSigningKey` class, ensure that the return statement call to `this.verify` ends in `.verified`.

Versions of OpenPubkey library prior to 0.10.0 contained a vulnerability that would allow a specially crafted JWS to bypass signature verification.

Studio Network Solutions ShareBrowser before 7.0 on macOS mishandles signature verification, aka PMP-2636.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.843 Application 20.0.1923 allows Insufficient Signature Validation OVE-20230524-0014.

ruby-saml provides security assertion markup language (SAML) single sign-on (SSO) for Ruby. An authentication bypass vulnerability was found in ruby-saml prior to versions 1.12.4 and 1.18.0 due to a parser differential. ReXML and Nokogiri parse XML differently; the parsers can generate entirely different document structures from the same XML input. That allows an attacker to be able to execute a Signature Wrapping attack. This issue may lead to authentication bypass. Versions 1.12.4 and 1.18.0 fix the issue.

ruby-saml provides security assertion markup language (SAML) single sign-on (SSO) for Ruby. An authentication bypass vulnerability was found in ruby-saml prior to versions 1.12.4 and 1.18.0 due to a parser differential. ReXML and Nokogiri parse XML differently, the parsers can generate entirely different document structures from the same XML input. That allows an attacker to be able to execute a Signature Wrapping attack. This issue may lead to authentication bypass. Versions 1.12.4 and 1.18.0 contain a patch for the issue.

redhat-upgrade-tool: Does not check GPG signatures when upgrading versions

The firmware upgrade function in the admin web interface of the Rittal IoT Interface & CMC III Processing Unit devices checks if the patch files are signed before executing the containing run.sh script. The signing process is kind of an HMAC with a long string as key which is hard-coded in the firmware and is freely available for download. This allows crafting malicious "signed" .patch files in order to compromise the device and execute arbitrary code.

An Improper Verification of Cryptographic Signature in the SAML authentication of the Zscaler Admin UI allows a Privilege Escalation.This issue affects Admin UI: from 6.2 before 6.2r.

The package jsrsasign before 10.5.25 are vulnerable to Improper Verification of Cryptographic Signature when JWS or JWT signature with non Base64URL encoding special characters or number escaped characters may be validated as valid by mistake. Workaround: Validate JWS or JWT signature if it has Base64URL and dot safe string before executing JWS.verify() or JWS.verifyJWT() method.

reason-jose is a JOSE implementation in ReasonML and OCaml.`Jose.Jws.validate` does not check HS256 signatures. This allows tampering of JWS header and payload data if the service does not perform additional checks. Such tampering could expose applications using reason-jose to authorization bypass. Applications relying on JWS claims assertion to enforce security boundaries may be vulnerable to privilege escalation. This issue has been patched in version 0.8.2.

The Robot application in Ip-label Newtest before v8.5R0 was discovered to use weak signature checks on executed binaries, allowing attackers to have write access and escalate privileges via replacing NEWTESTREMOTEMANAGER.EXE.

Bash injection vulnerability and bypass of signature verification in Rostelecom CS-C2SHW 5.0.082.1. The camera reads firmware update configuration from SD card file vc\version.json. fw-sign parameter and from this configuration is directly inserted into a bash command. Firmware update is run automatically if there is special file on the inserted SD card.

uthenticode is a small cross-platform library for partially verifying Authenticode digital signatures. Version 1.0.9 of uthenticode hashed the entire file rather than hashing sections by virtual address, in violation of the Authenticode specification. As a result, an attacker could modify code within a binary without changing its Authenticode hash, making it appear valid from uthenticode's perspective. Versions of uthenticode prior to 1.0.9 are not vulnerable to this attack, nor are versions in the 2.x series. By design, uthenticode does not perform full-chain validation. However, the malleability of signature verification introduced in 1.0.9 was an unintended oversight. The 2.x series addresses the vulnerability. Versions prior to 1.0.9 are also not vulnerable, but users are encouraged to upgrade rather than downgrade. There are no workarounds to this vulnerability.

The verify function in the Stark Bank Node.js ECDSA library (ecdsa-node) 1.1.2 fails to check that the signature is non-zero, which allows attackers to forge signatures on arbitrary messages.

The verify function in the Stark Bank Python ECDSA library (aka starkbank-escada or ecdsa-python) before 2.0.1 fails to check that the signature is non-zero, which allows attackers to forge signatures on arbitrary messages.

The verify function in the Stark Bank .NET ECDSA library (ecdsa-dotnet) 1.3.1 fails to check that the signature is non-zero, which allows attackers to forge signatures on arbitrary messages.

The verify function in the Stark Bank Java ECDSA library (ecdsa-java) 1.0.0 fails to check that the signature is non-zero, which allows attackers to forge signatures on arbitrary messages.

The verify function in the Stark Bank Elixir ECDSA library (ecdsa-elixir) 1.0.0 fails to check that the signature is non-zero, which allows attackers to forge signatures on arbitrary messages.

A firmware validation issue was discovered in HMI3 Control Panel in Swisslog Healthcare Nexus Panel operated by released versions of software before Nexus Software 7.2.5.7. There is no firmware validation (e.g., cryptographic signature validation) during a File Upload for a firmware update.

DataHub is an open-source metadata platform. Prior to version 0.8.45, the `StatelessTokenService` of the DataHub metadata service (GMS) does not verify the signature of JWT tokens. This allows an attacker to connect to DataHub instances as any user if Metadata Service authentication is enabled. This vulnerability occurs because the `StatelessTokenService` of the Metadata service uses the `parse` method of `io.jsonwebtoken.JwtParser`, which does not perform a verification of the cryptographic token signature. This means that JWTs are accepted regardless of the used algorithm. This issue may lead to an authentication bypass. Version 0.8.45 contains a patch for the issue. There are no known workarounds.

A library injection vulnerability exists in Microsoft Teams (work or school) 24046.2813.2770.1094 for macOS. A specially crafted library can leverage Teams's access privileges, leading to a permission bypass. A malicious application could inject a library and start the program to trigger this vulnerability and then make use of the vulnerable application's permissions.

An improper verification of cryptographic signature vulnerability exists in the Palo Alto Networks Prisma Cloud Compute console. This vulnerability enables an attacker to bypass signature validation during SAML authentication by logging in to the Prisma Cloud Compute console as any authorized user. This issue impacts: All versions of Prisma Cloud Compute 19.11, Prisma Cloud Compute 20.04, and Prisma Cloud Compute 20.09; Prisma Cloud Compute 20.12 before update 1. Prisma Cloud Compute SaaS version is not impacted by this vulnerability.