Cypress : https://www.infineon.com/ Cypress Bluetooth Mesh SDK BSA0107_05.01.00-BX8-AMESH-08 is affected by: Buffer Overflow. The impact is: execute arbitrary code (remote). The component is: affected function is pb_transport_handle_frag_. ¶¶ In Cypress Bluetooth Mesh SDK, there is an out-of-bound write vulnerability that can be triggered during mesh provisioning. Because there is no check for mismatched SegN and TotalLength in Transaction Start PDU.

An Improper Restriction of Operations within the Bounds of a Memory Buffer issue was discovered in the Continental AG Infineon S-Gold 2 (PMB 8876) chipset on BMW several models produced between 2009-2010, Ford a limited number of P-HEV vehicles, Infiniti 2013 JX35, Infiniti 2014-2016 QX60, Infiniti 2014-2016 QX60 Hybrid, Infiniti 2014-2015 QX50, Infiniti 2014-2015 QX50 Hybrid, Infiniti 2013 M37/M56, Infiniti 2014-2016 Q70, Infiniti 2014-2016 Q70L, Infiniti 2015-2016 Q70 Hybrid, Infiniti 2013 QX56, Infiniti 2014-2016 QX 80, and Nissan 2011-2015 Leaf. A vulnerability in the temporary mobile subscriber identity (TMSI) may allow an attacker to access and control memory. This may allow remote code execution on the baseband radio processor of the TCU.

ASUS RT-AX56U’s user profile configuration function is vulnerable to stack-based buffer overflow due to insufficient validation for parameter length. An unauthenticated LAN attacker can execute arbitrary code to perform arbitrary operations or disrupt service.

AMI’s SPx contains a vulnerability in the BMC where an Attacker may cause a stack-based buffer overflow via an adjacent network. A successful exploitation of this vulnerability may lead to a loss of confidentiality, integrity, and/or availability.

in OpenHarmony v4.0.0 and prior versions allow a remote attacker arbitrary code execution in pre-installed apps through out-of-bounds write.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR940N 3.20.1 Build 200316 Rel.34392n (5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of file name extensions. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13910.

in OpenHarmony v4.0.0 and prior versions allow a remote attacker arbitrary code execution in pre-installed apps through out-of-bounds write.

Due to a failure in validating the length of a provided MQTT_CMD_PUBLISH parsed message with a variable length header, Cesanta Mongoose, an embeddable web server, version 7.10 is susceptible to a heap-based buffer overflow vulnerability in the default configuration. Version 7.9 and prior does not appear to be vulnerable. This issue is resolved in version 7.11.

TP-Link EC-70 devices through 2.3.4 Build 20220902 rel.69498 have a Buffer Overflow.

NETGEAR RAX30 soap_serverd Stack-based Buffer Overflow Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30. Authentication is not required to exploit this vulnerability. The specific flaw exists within the soap_serverd binary. When parsing the request headers, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-19840.

NVIDIA DGX H100 baseboard management controller (BMC) contains a vulnerability in a web server plugin, where an unauthenticated attacker may cause a stack overflow by sending a specially crafted network packet. A successful exploit of this vulnerability may lead to arbitrary code execution, denial of service, information disclosure, and data tampering.

in OpenHarmony v4.0.0 and prior versions allow a remote attacker arbitrary code execution in pre-installed apps through out-of-bounds write.

in OpenHarmony v4.0.0 and prior versions allow a remote attacker arbitrary code execution in pre-installed apps through out-of-bounds read and write.

In SDP_AddAttribute of sdp_db.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

In nci_snd_set_routing_cmd of nci_hmsgs.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-264879662

TOTOLINK AC1200 Wireless Router A3002R Firmware V1.1.1-B20200824 is vulnerable to Buffer Overflow. In the boa server program's CGI handling function formWlEncrypt, there is a lack of length restriction on the wlan_ssid field. This oversight leads to potential buffer overflow under specific circumstances. For instance, by invoking the formWlanRedirect function with specific parameters to alter wlan_idx's value and subsequently invoking the formWlEncrypt function, an attacker can trigger buffer overflow, enabling arbitrary command execution or denial of service attacks.

Ariel Harush and Roy Hodir from OTORIO have found a flaw in the AXIS A1001 when communicating over OSDP. A heap-based buffer overflow was found in the pacsiod process which is handling the OSDP communication allowing to write outside of the allocated buffer. By appending invalid data to an OSDP message it was possible to write data beyond the heap allocated buffer. The data written outside the buffer could be used to execute arbitrary code.  lease refer to the Axis security advisory for more information, mitigation and affected products and software versions.

In Bluetooth, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

E6878-370 products with versions of 10.0.3.1(H557SP27C233) and 10.0.3.1(H563SP1C00) have a stack buffer overflow vulnerability. The program copies an input buffer to an output buffer without verification. An attacker in the adjacent network could send a crafted message, successful exploit could lead to stack buffer overflow which may cause malicious code execution.

Description: A vulnerability in SiLabs Z/IP Gateway 7.18.01 and earlier allows an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the submit-url parameter at /formNewSchedule. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Tenda AC23 v16.03.07.44 was discovered to contain a stack overflow via the security_5g parameter in the function formWifiBasicSet.

TRENDnet Wi-Fi routers TEW751DR v1.03 and TEW-752DRU v1.03 were discovered to contain a stack overflow via the function genacgi_main.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of multiple D-Link routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the lighttpd service, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13796.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected D-Link DIR-2150 4.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the anweb service, which listens on TCP ports 80 and 443 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15727.

Silicon Labs Gecko OS Debug Interface Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Silicon Labs Gecko OS. Authentication is not required to exploit this vulnerability. The specific flaw exists within the debug interface. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-23184

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of ChargePoint Home Flex charging stations. Authentication is not required to exploit this vulnerability. The specific flaw exists within the wlanchnllst function. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of root.

In Zephyr bluetooth mesh core stack, an out-of-bound write vulnerability can be triggered during provisioning.

In Nordic nRF5 SDK for Mesh 5.0, a heap overflow vulnerability can be triggered by sending a series of segmented control packets and access packets with the same SeqAuth

In Zephyr bluetooth mesh core stack, an out-of-bound write vulnerability can be triggered during provisioning.

In wlan firmware, there is a possible out of bounds write due to improper input validation. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08360153 (for MT6XXX chipsets) / WCNCR00363530 (for MT79XX chipsets); Issue ID: MSV-979.

In Bestechnic Bluetooth Mesh SDK (BES2300) V1.0, a buffer overflow vulnerability can be triggered during provisioning, because there is no check for the SegN field of the Transaction Start PDU.

TP-Link Omada ER605 DHCPv6 Client Options Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DHCP options. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22420.

The Bluetooth module has an out-of-bounds write vulnerability. Successful exploitation of this vulnerability may result in malicious command execution at the remote end.

A vulnerability was found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028. It has been classified as critical. Affected is the function Goto_chidx of the file login.cgi of the component Front-End Authentication Page. The manipulation of the argument wlanUrl leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a buffer overflow via the time parameter in the sysLogin function.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6020 before 1.0.0.30, R6080 before 1.0.0.30, R6120 before 1.0.0.36, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects DGN2200v1 before 1.0.0.58, D8500 before 1.0.3.42, D7000v2 before 1.0.0.51, D6400 before 1.0.0.78, D6220 before 1.0.0.44, JNDR3000 before 1.0.0.24, R8000 before 1.0.4.18, R8500 before 1.0.2.122, R8300 before 1.0.2.122, R7900 before 1.0.2.16, R7000P before 1.3.2.34, R7300DST before 1.0.0.68, R7100LG before 1.0.0.46, R6900P before 1.3.2.34, R7000 before 1.0.9.28, R6900 before 1.0.1.46, R6700 before 1.0.1.46, R6400v2 before 1.0.2.56, R6400 before 1.0.1.42, R6300v2 before 1.0.4.28, R6250 before 1.0.4.26, WNDR3400v3 before 1.0.1.22, WNDR4500v2 before 1.0.0.72, and WNR3500Lv2 before 1.2.0.50.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6260 1.1.0.78_1.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the setupwizard.cgi page. A crafted SOAP request can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13511.

Tenda M3 V1.0.0.12(4856) was discovered to contain a stack overflow via the function upgrade.

The vulnerability described by CVE-2023-0972 has been additionally discovered in Silicon Labs Z-Wave end devices. This vulnerability may allow an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.

RCE/DOS: Linked-list corruption leading to large out-of-bounds write while sorting for forged fragment list in Zephyr. Zephyr versions >= >=2.4.0 contain Out-of-bounds Write (CWE-787). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fj4r-373f-9456

D-Link G416 ovpncfg Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21441.

D-Link G416 httpd API-AUTH Digest Processing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21662.

Tenda AX12 V22.03.01.46 was discovered to contain a stack overflow via the list parameter at /goform/SetVirtualServerCfg.

D-Link G416 cfgsave Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21442.

A heap buffer overflow in SANE Backends before 1.0.30 allows a malicious device connected to the same local network as the victim to execute arbitrary code, aka GHSL-2020-080.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6400v2 1.0.4.106_10.0.80 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the UPnP service, which listens on TCP port 5000 by default. When parsing the uuid request header, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14110.

TOTOLINK X2000R Gh v1.0.0-B20230221.0948.web was discovered to contain a stack overflow via the function formFilter.