An XXE issue was discovered in Automated Logic Corporation (ALC) Liebert SiteScan Web Version 6.5 and prior, ALC WebCTRL Version 6.5 and prior, and Carrier i-Vu Version 6.5 and prior. An attacker could enter malicious input to WebCTRL, i-Vu, or SiteScan Web through a weakly configured XML parser causing the application to execute arbitrary code or disclose file contents from a server or connected network.

An unauthenticated attacker can send a specially crafted unauthenticated HTTP request to the device that can overflow a buffer. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.29. The overflowed data leads to segmentation fault and ultimately a denial-of-service condition, causing the device to reboot. The impact of this vulnerability is that an unauthenticated attacker could leverage this flaw to cause the target device to become unresponsive. An attacker could automate this attack to achieve persistent DoS, effectively rendering the target controller useless.

On Juniper Networks SRX Series with ICAP (Internet Content Adaptation Protocol) redirect service enabled, processing a malformed HTTP message can lead to a Denial of Service (DoS) or Remote Code Execution (RCE) Continued processing of this malformed HTTP message may result in an extended Denial of Service (DoS) condition. The offending HTTP message that causes this issue may originate both from the HTTP server or the HTTP client. This issue affects Juniper Networks Junos OS on SRX Series: 18.1 versions prior to 18.1R3-S9 ; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S4, 18.3R3-S1; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3; 19.1 versions prior to 19.1R1-S5, 19.1R2; 19.2 versions prior to 19.2R1-S2, 19.2R2; 19.3 versions prior to 19.3R2. This issue does not affect Juniper Networks Junos OS prior to 18.1R1.

Buffer overflow in pngpread.c in libpng before 1.2.44 and 1.4.x before 1.4.3, as used in progressive applications, might allow remote attackers to execute arbitrary code via a PNG image that triggers an additional data row.

Multiple buffer overflows in the RLE decoder in the rgbimg module in Python 2.5 allow remote attackers to have an unspecified impact via an image file containing crafted data that triggers improper processing within the (1) longimagedata or (2) expandrow function.

In Yokogawa WideField3 R1.01 - R4.03, a buffer overflow could be caused when a user loads a maliciously crafted project file.

A vulnerability has been identified in Cerberus PRO EN Engineering Tool (All versions < IP8), Cerberus PRO EN Fire Panel FC72x IP6 (All versions < IP6 SR3), Cerberus PRO EN Fire Panel FC72x IP7 (All versions < IP7 SR5), Cerberus PRO EN X200 Cloud Distribution IP7 (All versions < V3.0.6602), Cerberus PRO EN X200 Cloud Distribution IP8 (All versions < V4.0.5016), Cerberus PRO EN X300 Cloud Distribution IP7 (All versions < V3.2.6601), Cerberus PRO EN X300 Cloud Distribution IP8 (All versions < V4.2.5015), Cerberus PRO UL Compact Panel FC922/924 (All versions < MP4), Cerberus PRO UL Engineering Tool (All versions < MP4), Cerberus PRO UL X300 Cloud Distribution (All versions < V4.3.0001), Desigo Fire Safety UL Compact Panel FC2025/2050 (All versions < MP4), Desigo Fire Safety UL Engineering Tool (All versions < MP4), Desigo Fire Safety UL X300 Cloud Distribution (All versions < V4.3.0001), Sinteso FS20 EN Engineering Tool (All versions < MP8), Sinteso FS20 EN Fire Panel FC20 MP6 (All versions < MP6 SR3), Sinteso FS20 EN Fire Panel FC20 MP7 (All versions < MP7 SR5), Sinteso FS20 EN X200 Cloud Distribution MP7 (All versions < V3.0.6602), Sinteso FS20 EN X200 Cloud Distribution MP8 (All versions < V4.0.5016), Sinteso FS20 EN X300 Cloud Distribution MP7 (All versions < V3.2.6601), Sinteso FS20 EN X300 Cloud Distribution MP8 (All versions < V4.2.5015), Sinteso Mobile (All versions < V3.0.0). The network communication library in affected systems does not validate the length of certain X.509 certificate attributes which might result in a stack-based buffer overflow. This could allow an unauthenticated remote attacker to execute code on the underlying operating system with root privileges.

The server in Chocolate Doom 3.0.0 and Crispy Doom 5.8.0 doesn't validate the user-controlled num_players value, leading to a buffer overflow. A malicious user can overwrite the server's stack.

In ACCEL-PPP (an implementation of PPTP/PPPoE/L2TP/SSTP), there is a buffer overflow when receiving an l2tp control packet ith an AVP which type is a string and no hidden flags, length set to less than 6. If your application is used in open networks or there are untrusted nodes in the network it is highly recommended to apply the patch. The problem was patched with commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b As a workaround changes of commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b can be applied to older versions.

Buffer overflow in Internet Mail Connector (IMC) for Microsoft Exchange Server 5.5 allows remote attackers to execute arbitrary code via an EHLO request from a system with a long name as obtained through a reverse DNS lookup, which triggers the overflow in IMC's hello response.

A buffer overflow in the M_LoadDefaults function in m_misc.c in id Tech 1 (aka Doom engine) allows arbitrary code execution via an unsafe usage of fscanf, because it does not limit the number of characters to be read in a format argument.

Sophos XG Firewall 17.x through v17.5 MR12 allows a Buffer Overflow and remote code execution via the HTTP/S Bookmarks feature for clientless access. Hotfix HF062020.1 was published for all firewalls running v17.x.

Buffer overflow in MIT Kerberos 5 (krb5) 1.2.2 and earlier allows remote attackers to cause a denial of service and possibly execute arbitrary code via base-64 encoded data, which is not properly handled when the radix_encode function processes file glob output from the ftpglob function.

An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/openSchedWifi schedStartTime and schedEndTime parameters for a POST request, a value is directly used in a strcpy to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.

An issue was discovered in janus-gateway (aka Janus WebRTC Server) through 0.10.0. janus_streaming_rtsp_parse_sdp in plugins/janus_streaming.c has a Buffer Overflow via a crafted RTSP server.

A vulnerability has been found in Netgear R6900P and R7000P 1.3.3.154 and classified as critical. Affected by this vulnerability is the function sub_16C4C of the component HTTP Header Handler. The manipulation of the argument Host leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on LG mobile devices with Android OS 7.2, 8.0, 8.1, 9, and 10 (MTK chipsets). Code execution can occur via an MTK AT command handler buffer overflow. The LG ID is LVE-SMP-200008 (June 2020).

An issue was discovered on certain DrayTek Vigor routers before July 2022 such as the Vigor3910 before 4.3.1.1. /cgi-bin/wlogin.cgi has a buffer overflow via the username or password to the aa or ab field.

There is a buffer overflow in librsa.so called by getwifipwdurl interface, resulting in code execution on Xiaomi router AX3600 with ROM version =rom< 1.1.12.

An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/SetNetControlList list parameter for a POST request, a value is directly used in a strcpy to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.

An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/saveParentControlInfo deviceId and time parameters for a POST request, a value is directly used in a strcpy to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.

An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/addressNat entrys and mitInterface parameters for a POST request, a value is directly used in a sprintf to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.

An issue was discovered in janus-gateway (aka Janus WebRTC Server) through 0.10.0. janus_get_codec_from_pt in utils.c has a Buffer Overflow via long value in an SDP Offer packet.

Buffer overflow in AOL Instant Messenger (AIM) before 4.3.2229 allows remote attackers to execute arbitrary commands via a "buddyicon" command with a long "src" argument.

An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/SetSpeedWan speed_dir parameter for a POST request, a value is directly used in a sprintf to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.

Small HTTP Server version 3.06 suffers from a remote buffer overflow vulnerability via long GET request.

Azure RTOS USBX is a USB host, device, and on-the-go (OTG) embedded stack. Prior to version 6.1.11, he USBX DFU UPLOAD functionality may be utilized to introduce a buffer overflow resulting in overwrite of memory contents. In particular cases this may allow an attacker to bypass security features or execute arbitrary code. The implementation of `ux_device_class_dfu_control_request` function does not assure that a buffer overflow will not occur during handling of the DFU UPLOAD command. When an attacker issues the `UX_SLAVE_CLASS_DFU_COMMAND_UPLOAD` control transfer request with `wLenght` larger than the buffer size (`UX_SLAVE_REQUEST_CONTROL_MAX_LENGTH`, 256 bytes), depending on the actual implementation of `dfu -> ux_slave_class_dfu_read`, a buffer overflow may occur. In example `ux_slave_class_dfu_read` may read 4096 bytes (or more up to 65k) to a 256 byte buffer ultimately resulting in an overflow. Furthermore in case an attacker has some control over the read flash memory, this may result in execution of arbitrary code and platform compromise. A fix for this issue has been included in USBX release 6.1.11. As a workaround, align request and buffer size to assure that buffer boundaries are respected.

A buffer overflow vulnerability exists in the razermouse driver of OpenRazer up to version v3.3.0 allows attackers to cause a Denial of Service (DoS) and possibly escalate their privileges via a crafted buffer sent to the matrix_custom_frame device.

A buffer overflow vulnerability exists in the razerkbd driver of OpenRazer up to version v3.3.0 allows attackers to cause a Denial of Service (DoS) and possibly escalate their privileges via a crafted buffer sent to the matrix_custom_frame device.

Azure RTOS USBX is a USB host, device, and on-the-go (OTG) embedded stack. In versions prior to 6.1.10, an attacker can cause a buffer overflow by providing the Azure RTOS USBX host stack a HUB descriptor with `bNbPorts` set to a value greater than `UX_MAX_TT` which defaults to 8. For a `bNbPorts` value of 255, the implementation of `ux_host_class_hub_descriptor_get` function will modify the contents of `hub` -> `ux_host_class_hub_device` -> `ux_device_hub_tt` array violating the end boundary by 255 - `UX_MAX_TT` items. The USB host stack needs to validate the number of ports reported by the hub, and if the value is larger than UX_MAX_TT, USB stack needs to reject the request. This fix has been included in USBX release 6.1.10.

Apache HTTP server 2.4.32 to 2.4.44 mod_proxy_uwsgi info disclosure and possible RCE

Denial of service to NT mail servers including Ipswitch, Mdaemon, and Exchange through a buffer overflow in the SMTP HELO command.

Buffer overflow in the regular expression handler in Red Hat Directory Server 8.0 and 7.1 before SP6 allows remote attackers to cause a denial of service (slapd crash) and possibly execute arbitrary code via a crafted LDAP query that triggers the overflow during translation to a regular expression.

scheme/webauthn.c in Glewlwyd SSO server 2.x before 2.6.2 has a buffer overflow associated with a webauthn assertion.

pam-krb5 before 4.9 has a buffer overflow that might cause remote code execution in situations involving supplemental prompting by a Kerberos library. It may overflow a buffer provided by the underlying Kerberos library by a single '\0' byte if an attacker responds to a prompt with an answer of a carefully chosen length. The effect may range from heap corruption to stack corruption depending on the structure of the underlying Kerberos library, with unknown effects but possibly including code execution. This code path is not used for normal authentication, but only when the Kerberos library does supplemental prompting, such as with PKINIT or when using the non-standard no_prompt PAM configuration option.

u'fscanf reads a string from a file and stores its contents on a statically allocated stack memory which leads to stack overflow' in Snapdragon Wired Infrastructure and Networking in IPQ4019, IPQ6018, IPQ8064, IPQ8074, QCA9531, QCA9980

VISAM VBASE Editor version 11.5.0.2 and VBASE Web-Remote Module may allow a vulnerable ActiveX component to be exploited resulting in a buffer overflow, which may lead to a denial-of-service condition and execution of arbitrary code.

The Zephyr MQTT parsing code performs insufficient checking of the length field on publish messages, allowing a buffer overflow and potentially remote code execution. NCC-ZEP-031 This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions.

A Buffer Overflow vulnerability exists in the latest version of Miniftpd in the do_retr function in ftpproto.c

A malformed JSON payload that is received from an UpdateHub server may trigger memory corruption in the Zephyr OS. This could result in a denial of service in the best case, or code execution in the worst case. See NCC-NCC-016 This issue affects: zephyrproject-rtos zephyr version 2.1.0 and later versions. version 2.2.0 and later versions.

There is a buffer overflow in gps-sdr-sim v1.0 when parsing long command line parameters, which can lead to DoS or code execution.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later

A vulnerability has been identified in SICAM MMU (All versions < V2.05), SICAM SGU (All versions), SICAM T (All versions < V2.18). A buffer overflow in various positions of the web application might enable an attacker with access to the web application to execute arbitrary code over the network.

In the Zephyr Project MQTT code, improper bounds checking can result in memory corruption and possibly remote code execution. NCC-ZEP-031 This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions.

The rad_packet_recv function in radius/packet.c suffers from a memcpy buffer overflow, resulting in an overly-large recvfrom into a fixed buffer that causes a buffer overflow and overwrites arbitrary memory. If the server connects with a malicious client, crafted client requests can remotely trigger this vulnerability.