Notepad++ 7.3.3 (32-bit) with Hex Editor Plugin v0.9.5 might allow user-assisted attackers to execute code via a crafted file, because of a "Data from Faulting Address controls Code Flow" issue. One threat model is a victim who obtains an untrusted crafted file from a remote location and issues several user-defined commands.

Notepad++ is a free and open-source source code editor. Versions 8.5.6 and prior are vulnerable to heap buffer write overflow in `Utf8_16_Read::convert`. This issue may lead to arbitrary code execution. As of time of publication, no known patches are available in existing versions of Notepad++.

SciLexer.dll in Scintilla in Notepad++ (x64) before 7.7 allows remote code execution or denial of service via Unicode characters in a crafted .ml file.

Notepad++ is a free and open-source source code editor. In versions 8.8.1 and prior, a privilege escalation vulnerability exists in the Notepad++ v8.8.1 installer that allows unprivileged users to gain SYSTEM-level privileges through insecure executable search paths. An attacker could use social engineering or clickjacking to trick users into downloading both the legitimate installer and a malicious executable to the same directory (typically Downloads folder - which is known as Vulnerable directory). Upon running the installer, the attack executes automatically with SYSTEM privileges. This issue has been fixed and will be released in version 8.8.2.

A vulnerability classified as problematic was found in NotePad++ up to 8.1. Affected by this vulnerability is an unknown functionality of the file dbghelp.exe. The manipulation leads to uncontrolled search path. An attack has to be approached locally. The identifier VDB-246421 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An Untrusted search path vulnerability in notepad++ 6.5 allows local users to gain escalated privileges through the msimg32.dll file in the current working directory.

Quick Heal Total Security 64 bit 17.00 (QHTS64.exe), (QHTSFT64.exe) - Version 10.0.1.38; Quick Heal Total Security 32 bit 17.00 (QHTS32.exe), (QHTSFT32.exe) - Version 10.0.1.38; Quick Heal Internet Security 64 bit 17.00 (QHIS64.exe), (QHISFT64.exe) - Version 10.0.0.37; Quick Heal Internet Security 32 bit 17.00 (QHIS32.exe), (QHISFT32.exe) - Version 10.0.0.37; Quick Heal AntiVirus Pro 64 bit 17.00 (QHAV64.exe), (QHAVFT64.exe) - Version 10.0.0.37; and Quick Heal AntiVirus Pro 32 bit 17.00 (QHAV32.exe), (QHAVFT32.exe) - Version 10.0.0.37 allow DLL Hijacking because of Insecure Library Loading.

A vulnerability, which was classified as problematic, has been found in KMPlayer 4.2.2.73. This issue affects some unknown processing in the library SHFOLDER.dll. The manipulation leads to uncontrolled search path. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The identifier VDB-224633 was assigned to this vulnerability.

VT STUDIO Ver.8.32 and earlier contains an issue with the DLL search path, which may lead to insecurely loading Dynamic Link Libraries. As a result, arbitrary code may be executed with the privileges of the running application.

Acronis Cyber Protect 15 for Windows prior to build 27009 and Acronis Agent for Windows prior to build 26226 allowed local privilege escalation via DLL hijacking.

A command Injection Vulnerability in TA for mac-OS prior to version 5.7.9 allows local users to place an arbitrary file into the /Library/Trellix/Agent/bin/ folder. The malicious file is executed by running the TA deployment feature located in the System Tree.

Uncontrolled Search Path Element in GitHub repository bits-and-blooms/bloom prior to 3.3.1.

An issue was discovered in Foxit Reader and PhantomPDF before 10.1.4. It allows DLL hijacking, aka CNVD-C-2021-68000 and CNVD-C-2021-68502.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Monitor Wall installer up to and including version 10.00.0164 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

Trend Micro uiAirSupport, included in the Trend Micro Security 2023 family of consumer products, version 6.0.2092 and below is vulnerable to a DLL hijacking/proxying vulnerability, which if exploited could allow an attacker to impersonate and modify a library to execute code on the system and ultimately escalate privileges on an affected system.

Genymotion Desktop v3.3.2 was discovered to contain a DLL hijacking vulnerability that allows attackers to escalate privileges and execute arbitrary code via a crafted DLL.

A DLL hijacking vulnerability has been discovered in OutSystems Service Studio 11 11.53.30 build 61739. When a user open a .oml file (OutSystems Modeling Language), the application will load the following DLLs from the same directory av_libGLESv2.dll, libcef.DLL, user32.dll, and d3d10warp.dll. Using a crafted DLL, it is possible to execute arbitrary code in the context of the current logged in user.

Encode.pm, as distributed in Perl through 5.34.0, allows local users to gain privileges via a Trojan horse Encode::ConfigLocal library (in the current working directory) that preempts dynamic module loading. Exploitation requires an unusual configuration, and certain 2021 versions of Encode.pm (3.05 through 3.11). This issue occurs because the || operator evaluates @INC in a scalar context, and thus @INC has only an integer value.

Delta Electronics CNCSoft-B DOPSoft prior to v4.0.0.82 insecurely loads libraries, which may allow an attacker to use DLL hijacking and take over the system where the software is installed.

Substance3D - Modeler versions 1.22.0 and earlier are affected by an Uncontrolled Search Path Element vulnerability that could result in arbitrary code execution in the context of the current user. If the application uses an uncontrolled search path to locate critical resources such as programs, an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. Exploitation of this issue does not require user interaction.

OpenVPN Connect 3.2.0 through 3.3.0 allows local users to load arbitrary dynamic loadable libraries via an OpenSSL configuration file if present, which allows the user to run arbitrary code with the same privilege level as the main OpenVPN process (OpenVPNConnect.exe).

A binary hijack in Orwell-Dev-Cpp v5.11 allows attackers to execute arbitrary code via a crafted .exe file.

A vulnerability, which was classified as critical, was found in VSO ConvertXtoDvd 7.0.0.83. Affected is an unknown function in the library avcodec.dll of the file ConvertXtoDvd.exe. The manipulation leads to uncontrolled search path. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple DLL Search Order Hijack vulnerabilities were addressed in the SanDisk Security Installer for Windows that could allow attackers with local access to execute arbitrary code by executing the installer in the same folder as the malicious DLL. This can lead to the execution of arbitrary code with the privileges of the vulnerable application or obtain a certain level of persistence on the compromised host. 

A DLL preloading vulnerability was reported in Lenovo Driver Management prior to version 2.9.0719.1104 that could allow privilege escalation.

OpenVPN before version 2.5.3 on Windows allows local users to load arbitrary dynamic loadable libraries via an OpenSSL configuration file if present, which allows the user to run arbitrary code with the same privilege level as the main OpenVPN process (openvpn.exe).

dandavison delta before 0.8.3 on Windows resolves an executable's pathname as a relative path from the current directory.

The vulnerability, if exploited, could allow a malicious entity with access to the file system to achieve arbitrary code execution and privilege escalation by tricking AVEVA Edge to load an unsafe DLL.

An uncontrolled search path element vulnerability has been found in the Duet Display product, affecting version 2.5.9.1. An attacker could place an arbitrary libusk.dll file in the C:\Users\user\AppData\Local\Microsoft\WindowsApps\ directory, which could lead to the execution and persistence of arbitrary code.

A vulnerability was found in XINJE XDPPro up to 3.7.17a. It has been rated as critical. Affected by this issue is some unknown functionality in the library cfgmgr32.dll. The manipulation leads to uncontrolled search path. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. VDB-241586 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Regify Regipay Client for Windows version 4.5.1.0 allows DLL hijacking: a user can trigger the execution of arbitrary code every time the product is executed.

DPMAdirektPro 4.1.5 is vulnerable to DLL Hijacking. It happens by placing a malicious DLL in a directory (in the absence of a legitimate DLL), which is then loaded by the application instead of the legitimate DLL. This causes the malicious DLL to load with the same privileges as the application, thus causing a privilege escalation.

Acronis True Image prior to 2021 Update 4 for Windows allowed local privilege escalation due to DLL hijacking.

Substance3D - Modeler versions 1.21.0 and earlier are affected by an Uncontrolled Search Path Element vulnerability that could result in arbitrary code execution in the context of the current user. If the application relies on a search path to locate critical resources such as libraries or executables, an attacker could manipulate the search path to load a malicious resource, potentially executing arbitrary code. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

A vulnerability, which was classified as critical, has been found in Discord 1.0.9188 on Windows. Affected by this issue is some unknown functionality in the library WINSTA.dll. The manipulation leads to uncontrolled search path. The attack needs to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

It is possible to sideload a compromised DLL during the installation at elevated privilege.

Local privilege escalation due to DLL hijacking vulnerability. The following products are affected: Acronis Cyber Protect Home Office (Windows) before build 40901, Acronis Cyber Protect Cloud Agent (Windows) before build 39378, Acronis Cyber Protect 16 (Windows) before build 39938.

An uncontrolled search path element vulnerability has been found on 4D and 4D server Windows executables applications, affecting version 19 R8 100218. This vulnerability consists in a DLL hijacking by replacing x64 shfolder.dll in the installation path, causing an arbitrary code execution.

An issue found in UwAmp v.1.1, 1.2, 1.3, 2.0, 2.1, 2.2, 2.2.1, 3.0.0, 3.0.1, 3.0.2 allows a remote attacker to execute arbitrary code via a crafted DLL.

Emerson DeltaV DCS versions 11.3.1, 12.3.1, 13.3.0, 13.3.1, R5 allow a specially crafted DLL file to be placed in the search path and loaded as an internal and valid DLL, which may allow arbitrary code execution.

When loading the shared library that provides the OTR protocol implementation, Thunderbird will initially attempt to open it using a filename that isn't distributed by Thunderbird. If a computer has already been infected with a malicious library of the alternative filename, and the malicious library has been copied to a directory that is contained in the search path for executable libraries, then Thunderbird will load the incorrect library. This vulnerability affects Thunderbird < 78.9.1.

Dr.Web Firewall 12.5.2.4160 on Windows incorrectly restricts applications signed by Dr.Web. A DLL for a custom payload within a legitimate binary (e.g., frwl_svc.exe) bypasses firewall filters.

The unofficial C/C++ Advanced Lint extension before 1.9.0 for Visual Studio Code allows attackers to execute arbitrary binaries if the user opens a crafted repository.

Trend Micro Password Manager version 5 (Consumer) is vulnerable to a DLL Hijacking vulnerability which could allow an attacker to inject a malicious DLL file during the installation progress and could execute a malicious program each time a user installs a program.

Adobe Dimension version 3.4 (and earlier) is affected by an Uncontrolled Search Path Element element. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

An issue was discovered in Forescout CounterACT before 8.1.4. A local privilege escalation vulnerability is present in the logging function. SecureConnector runs with administrative privileges and writes logs entries to a file in %PROGRAMDATA%\ForeScout SecureConnector\ that has full permissions for the Everyone group. Using a symbolic link allows an attacker to point the log file to a privileged location such as %WINDIR%\System32. The resulting log file adopts the file permissions of the source of the symbolic link (in this case, the Everyone group). The log file in System32 can be replaced and renamed with a malicious DLL for DLL hijacking.

Untrusted search path vulnerability in The installer of Windows 10 Fall Creators Update Modify module for Security Measures tool allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

Adobe Creative Cloud Desktop Application (installer) version 2.4 (and earlier) is affected by an Uncontrolled Search Path Element vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Teradici PCoIP Graphics Agent for Windows prior to 21.03 does not validate NVENC.dll. An attacker could replace the .dll and redirect pixels elsewhere.

Squirrel.Windows is both a toolset and a library that provides installation and update functionality for Windows desktop applications. Installers generated by Squirrel.Windows 2.0.1 and earlier contain an issue with the DLL search path, which may lead to insecurely loading Dynamic Link Libraries. As a result, arbitrary code may be executed with the privilege of the user invoking the installer.