When using http protocol, the user password is transmitted as a clear text parameter for which it is possible to be obtained by an attacker through a MITM attack. This will be fixed starting from Firmware version 3.11.5, which will be released on the 30th of June, 2021.

Improper Authorization in SSH server in Bosch VMS 11.0, 11.1.0, and 11.1.1 allows a remote authenticated user to access resources within the trusted internal network via a port forwarding request.

Information disclosure: The main configuration, including users and their hashed passwords, is exposed by an unprotected web server resource and can be accessed without authentication. Additionally, device details are exposed which include the serial number and the firmware version by another unprotected web server resource.

The user and password data base is exposed by an unprotected web server resource. Passwords are hashed with a weak hashing algorithm and therefore allow an attacker to determine the password by using rainbow tables.

Siemens SINUMERIK Integrate Operate Clients between 2.0.3.00.016 (including) and 2.0.6 (excluding) and between 3.0.4.00.032 (including) and 3.0.6 (excluding) contain a vulnerability that could allow an attacker to read and manipulate data in TLS sessions while performing a man-in-the-middle (MITM) attack.

FOG is a free open-source cloning/imaging/rescue suite/inventory management system. The hostinfo page has missing/improper access control since only the host's mac address is required to obtain the configuration information. This data can only be retrieved if a task is pending on that host. Otherwise, an error message containing "Invalid tasking!" will be returned. The domainpassword in the hostinfo dump is hidden even to authenticated users, as it is displayed as a row of asterisks when navigating to the host's Active Directory settings. This vulnerability is fixed in 1.5.10.41.

A vulnerability classified as problematic has been found in Zhejiang Land Zongheng Network Technology O2OA up to 20240403. Affected is an unknown function of the file /x_portal_assemble_surface/jaxrs/portal/list?v=8.2.3-4-43f4fe3. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. VDB-260478 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Check_MK before 1.2.8p26 mishandles certain errors within the failed-login save feature because of a race condition, which allows remote attackers to obtain sensitive user information by reading a GUI crash report.

The komoot GmbH "Komoot - Cycling & Hiking Maps" app before 9.3.2 -- aka komoot-cycling-hiking-maps/id447374873 -- for iOS does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in E4J s.R.L. VikRentCar.This issue affects VikRentCar: from n/a through 1.3.2.

Vite (French word for "quick", pronounced /vit/, like "veet") is a frontend build tooling to improve the frontend development experience.`server.fs.deny` does not deny requests for patterns with directories. This vulnerability has been patched in version(s) 5.2.6, 5.1.7, 5.0.13, 4.5.3, 3.2.10 and 2.9.18.

This issue was addressed by using HTTPS when sending information over the network. This issue is fixed in Apple Music 3.5.0 for Android. An attacker in a privileged network position can track a user's activity.

Pion DTLS is a Go implementation of Datagram Transport Layer Security. Pion DTLS versions v1.0.0 through v3.0.10 and 3.1.0 use random nonce generation with AES GCM ciphers, which makes it easier for remote attackers to obtain the authentication key and spoof data by leveraging the reuse of a nonce in a session and a "forbidden attack". Upgrade to v3.0.11, v3.1.1, or later.

In wlan driver, there is a possible memory leak due to improper input handling. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00351241; Issue ID: MSV-1173.

The Order Attachments for WooCommerce plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.5.1 via the 'uploads' directory. This makes it possible for unauthenticated attackers to extract sensitive data stored insecurely in the /wp-content/uploads directory which can contain file attachments added to orders.

The Order Export for WooCommerce plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.24 via the 'uploads' directory. This makes it possible for unauthenticated attackers to extract sensitive data stored insecurely in the /wp-content/uploads directory which can contain exported order information. The plugin is only vulnerable when 'Order data storage' is set to 'WordPress posts storage (legacy)', and cannot be exploited when the default option of 'High-performance order storage' is enabled.

The 1 Click WordPress Migration Plugin – 100% FREE for a limited time plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.1 via the class-ocm-backup.php. This makes it possible for unauthenticated attackers to extract sensitive data including usernames and their respective password hashes during a short window of time in which the backup is in process.

The Return Refund and Exchange For WooCommerce – Return Management System, RMA Exchange, Wallet And Cancel Order Features plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 4.4.5 via the 'attachment' directory. This makes it possible for unauthenticated attackers to extract sensitive data stored insecurely in the /wp-content/attachment directory which can contain file attachments for order refunds.

The Print Invoice & Delivery Notes for WooCommerce plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 5.4.1 via the 'wcdn/invoice' directory. This makes it possible for unauthenticated attackers to extract sensitive data stored insecurely in the /wp-content/uploads/wcdn/invoice directory which can contain invoice files if an email attachment setting is enabled.

Puma is a Ruby/Rack web server built for parallelism. Prior to `puma` version `5.6.2`, `puma` may not always call `close` on the response body. Rails, prior to version `7.0.2.2`, depended on the response body being closed in order for its `CurrentAttributes` implementation to work correctly. The combination of these two behaviors (Puma not closing the body + Rails' Executor implementation) causes information leakage. This problem is fixed in Puma versions 5.6.2 and 4.3.11. This problem is fixed in Rails versions 7.02.2, 6.1.4.6, 6.0.4.6, and 5.2.6.2. Upgrading to a patched Rails _or_ Puma version fixes the vulnerability.

@sap-cloud-sdk/core contains the core functionality of the SAP Cloud SDK as well as the SAP Business Technology Platform abstractions. This affects applications on SAP Business Technology Platform that use the SAP Cloud SDK and enabled caching of destinations. In affected versions and in some cases, when user information was missing, destinations were cached without user information, allowing other users to retrieve the same destination with its permissions. By default, destination caching is disabled. The security for caching has been increased. The changes are released in version 1.52.0. Users unable to upgrade are advised to disable destination caching (it is disabled by default).

A vulnerability was detected in PHPGurukul News Portal 1.0. The impacted element is an unknown function of the file /onps/settings.py. Performing manipulation results in insertion of sensitive information into debugging code. It is possible to initiate the attack remotely. The attack's complexity is rated as high. The exploitability is regarded as difficult. The exploit is now public and may be used.

A flaw was found in the Linux kernels memory deduplication mechanism. Previous work has shown that memory deduplication can be attacked via a local exploitation mechanism. The same technique can be used if an attacker can upload page sized files and detect the change in access time from a networked service to determine if the page has been merged.

IBM Spectrum Virtualize 8.5, under certain circumstances, could disclose sensitive credential information while a download from Fix Central is in progress. IBM X-Force ID: 249518.

Discourse is an open source platform for community discussion. This vulnerability only impacts Discourse instances configured to use `FileStore::LocalStore` which means uploads and backups are stored locally on disk. If an attacker knows the name of the Discourse backup file, the attacker can trick nginx into sending the Discourse backup file with a well crafted request. This issue is patched in the latest stable, beta and tests-passed versions of Discourse. Users are advised to upgrade. Users unable to upgrade can either 1. Download all local backups on to another storage device, disable the `enable_backups` site setting and delete all backups until the site has been upgraded to pull in the fix. Or 2. Change the `backup_location` site setting to `s3` so that backups are stored and downloaded directly from S3.

An Exposure of Sensitive Information to an Unauthorized Actor vulnerability [CWE-200] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.1, FortiOS 7.4.0 through 7.4.6, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions may allow a remote unauthenticated attacker to bypass the patch developed for the symbolic link persistency mechanism observed in some post-exploit cases, via crafted HTTP requests. An attacker would need first to have compromised the product via another vulnerability, at filesystem level.

IBM Security Guardium Insights 3.0 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Smackcoders Export All Posts, Products, Orders, Refunds & Users.This issue affects Export All Posts, Products, Orders, Refunds & Users: from n/a through 2.4.1.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in mbbhatti Upload Resume.This issue affects Upload Resume: from n/a through 1.2.0.

IBM PowerVM Hypervisor FW950.00 through FW950.71, FW1010.00 through FW1010.40, FW1020.00 through FW1020.20, and FW1030.00 through FW1030.11 could allow an attacker to obtain sensitive information if they gain service access to the HMC. IBM X-Force ID: 247592.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Smackcoders Export All Posts, Products, Orders, Refunds & Users.This issue affects Export All Posts, Products, Orders, Refunds & Users: from n/a through 2.4.1.

The HTTP header in Philips EncoreAnywhere contains data an attacker may be able to use to gain sensitive information.

This issue was addressed with improved data protection. This issue is fixed in macOS Ventura 13. A user in a privileged network position may be able to track user activity.

IBM Spectrum Virtualize 8.5, 8.4, 8.3, 8.2, and 7.8, under certain configurations, could disclose sensitive information to an attacker using man-in-the-middle techniques. IBM X-Force ID: 235408.

Mailform Pro CGI 4.3.1 and earlier allow a remote unauthenticated attacker to obtain the user input data by having a use of the product to access a specially crafted URL.

IBM QRadar SIEM 7.4 and 7.5 is vulnerable to information exposure allowing a non-tenant user with a specific domain security profile assigned to see some data from other domains. IBM X-Force ID: 230402.

An improper certificate validation vulnerability in Fortinet FortiManager 5.0.6 through 5.2.7 and 5.4.0 through 5.4.1 allows remote attacker to spoof a trusted entity by using a man-in-the-middle (MITM) attack via the Fortisandbox devices probing feature.

When serving resources from a network location using the NTFS file system, Apache Tomcat versions 10.0.0-M1 to 10.0.0-M9, 9.0.0.M1 to 9.0.39, 8.5.0 to 8.5.59 and 7.0.0 to 7.0.106 were susceptible to JSP source code disclosure in some configurations. The root cause was the unexpected behaviour of the JRE API File.getCanonicalPath() which in turn was caused by the inconsistent behaviour of the Windows API (FindFirstFileW) in some circumstances.

The Mechanize library is used for automating interaction with websites. Mechanize automatically stores and sends cookies, follows redirects, and can follow links and submit forms. In versions prior to 2.8.5 the Authorization header is leaked after a redirect to a different port on the same site. Users are advised to upgrade to Mechanize v2.8.5 or later. There are no known workarounds for this issue.

UnsafeAccessor (UA) is a bridge to access jdk.internal.misc.Unsafe & sun.misc.Unsafe. Normally, if UA is loaded as a named module, the internal data of UA is protected by JVM and others can only access UA via UA's standard API. The main application can set up `SecurityCheck.AccessLimiter` for UA to limit access to UA. Starting with version 1.4.0 and prior to version 1.7.0, when `SecurityCheck.AccessLimiter` is set up, untrusted code can access UA without limitation, even when UA is loaded as a named module. This issue does not affect those for whom `SecurityCheck.AccessLimiter` is not set up. Version 1.7.0 contains a patch.

Cursor is a code editor built for programming with AI. In versions 1.6 and below, Mermaid (a to render diagrams) allows embedding images which then get rendered by Cursor in the chat box. An attacker can use this to exfiltrate sensitive information to a third-party attacker controlled server through an image fetch after successfully performing a prompt injection. A malicious model (or hallucination/backdoor) might also trigger this exploit at will. This issue requires prompt injection from malicious data (web, image upload, source code) in order to exploit. In that case, it can send sensitive information to an attacker-controlled external server. Some additional bypasses not covered in the initial fix to this issue were discovered, see GHSA-43wj-mwcc-x93p. This issue is fixed in version 1.7.

Metabase is an open source business intelligence and analytics application. Metabase has a proxy to load arbitrary URLs for JSON maps as part of our GeoJSON support. While we do validation to not return contents of arbitrary URLs, there is a case where a particularly crafted request could result in file access on windows, which allows enabling an `NTLM relay attack`, potentially allowing an attacker to receive the system password hash. If you use Windows and are on this version of Metabase, please upgrade immediately. The following patches (or greater versions) are available: 0.42.4 and 1.42.4, 0.41.7 and 1.41.7, 0.40.8 and 1.40.8.

Information exposure vulnerability in OpenGnsys affecting version 1.1.1d (Espeto). This vulnerability allows an attacker to view a php backup file (controlaccess.php-LAST) where database credentials are stored.

Action Pack is a framework for handling and responding to web requests. Under certain circumstances response bodies will not be closed. In the event a response is *not* notified of a `close`, `ActionDispatch::Executor` will not know to reset thread local state for the next request. This can lead to data being leaked to subsequent requests.This has been fixed in Rails 7.0.2.1, 6.1.4.5, 6.0.4.5, and 5.2.6.1. Upgrading is highly recommended, but to work around this problem a middleware described in GHSA-wh98-p28r-vrc9 can be used.

Information Exposure vulnerability exists in homeLYnk (Wiser For KNX) and spaceLYnk V2.60 and prior which could cause a device to be compromised when it is first configured.

In Brave Desktop between versions 1.17 and 1.26.60, when adblocking is enabled and a proxy browser extension is installed, the CNAME adblocking feature issues DNS requests that used the system DNS settings instead of the extension's proxy settings, resulting in possible information disclosure.

The Scribunto extension for MediaWiki allows remote attackers to obtain the rollback token and possibly other sensitive information via a crafted module, related to unstripping special page HTML.

FusionForge before 5.3.2 use scripts that run under the shared Apache user, which is also used by project homepages by default. If project webpages are hosted on the same server than FusionForge, it can allow users to incorrectly access on-disk private data in FusionForge.

IBM API Connect 5.0.0.0 through 5.0.8.3 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 142650.

liboqs is a C-language cryptographic library that provides implementations of post-quantum cryptography algorithms. Multiple secret-dependent branches have been identified in the reference implementation of the HQC key encapsulation mechanism when it is compiled with Clang for optimization levels above -O0 (-O1, -O2, etc). A proof-of-concept local attack exploits this secret-dependent information to recover the entire secret key. This vulnerability is fixed in 0.14.0.