Acronis Cyber Protect 15 for Windows prior to build 27009 and Acronis Agent for Windows prior to build 26226 allowed local privilege escalation via DLL hijacking.

Uncontrolled search path element in some Intel(R) RealSense(TM) Dynamic Calibration software before version 2.13.1.0 may allow an authenticated user to potentially enable escalation of privilege via local access.

OpenVPN before version 2.5.3 on Windows allows local users to load arbitrary dynamic loadable libraries via an OpenSSL configuration file if present, which allows the user to run arbitrary code with the same privilege level as the main OpenVPN process (openvpn.exe).

A DLL preloading vulnerability was reported in Lenovo Driver Management prior to version 2.9.0719.1104 that could allow privilege escalation.

Trend Micro Security 2021, 2022, and 2023 (Consumer) are vulnerable to a DLL Hijacking vulnerability which could allow an attacker to use a specific executable file as an execution and/or persistence mechanism which could execute a malicious program each time the executable file is started.

dandavison delta before 0.8.3 on Windows resolves an executable's pathname as a relative path from the current directory.

TeamViewer before 14.7.48644 on Windows loads untrusted DLLs in certain situations.

The Shenzhen Tencent app 5.8.2.5300 for PC platforms (from Tencent App Center) has a DLL hijacking vulnerability. Attackers can use this vulnerability to execute malicious code.

An unsafe search path vulnerability in FortiClientWindows 7.0.0, 6.4.6 and below, 6.2.x, 6.0.x and FortiClientEMS 7.0.0, 6.4.6 and below, 6.2.x, 6.0.x may allow an attacker to perform a DLL Hijack attack on affected devices via a malicious OpenSSL engine library in the search path.

A maliciously crafted DLL file can be forced to write beyond allocated boundaries in the Autodesk installer when parsing the DLL files and could lead to a Privilege Escalation vulnerability.

Improper access control vulnerability in the repair process for McAfee Agent for Windows prior to 5.7.4 could allow a local attacker to perform a DLL preloading attack using unsigned DLLs. This would result in elevation of privileges and the ability to execute arbitrary code as the system user, through not correctly protecting a temporary directory used in the repair process and not checking the DLL signature.

When loading the shared library that provides the OTR protocol implementation, Thunderbird will initially attempt to open it using a filename that isn't distributed by Thunderbird. If a computer has already been infected with a malicious library of the alternative filename, and the malicious library has been copied to a directory that is contained in the search path for executable libraries, then Thunderbird will load the incorrect library. This vulnerability affects Thunderbird < 78.9.1.

Teradici PCoIP Graphics Agent for Windows prior to 21.03 does not validate NVENC.dll. An attacker could replace the .dll and redirect pixels elsewhere.

Adobe Dimension version 3.4 (and earlier) is affected by an Uncontrolled Search Path Element element. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Adobe Creative Cloud Desktop Application (installer) version 2.4 (and earlier) is affected by an Uncontrolled Search Path Element vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

An issue was discovered in Forescout CounterACT before 8.1.4. A local privilege escalation vulnerability is present in the logging function. SecureConnector runs with administrative privileges and writes logs entries to a file in %PROGRAMDATA%\ForeScout SecureConnector\ that has full permissions for the Everyone group. Using a symbolic link allows an attacker to point the log file to a privileged location such as %WINDIR%\System32. The resulting log file adopts the file permissions of the source of the symbolic link (in this case, the Everyone group). The log file in System32 can be replaced and renamed with a malicious DLL for DLL hijacking.

A DLL Hijacking issue discovered in Soft-o Free Password Manager 1.1.20 allows attackers to create arbitrary DLLs leading to code execution.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of AVEVA Edge 2020 SP2 Patch 0(4201.2111.1802.0000). User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of APP files. The process loads a library from an unsecured location. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-17114.

EOL Product CVE - Installer of Trend Micro Password Manager (Consumer) versions 3.7.0.1223 and below provided by Trend Micro Incorporated contains an issue with the DLL search path, which may lead to insecurely loading Dynamic Link Libraries (CWE-427). Please note that this was reported on an EOL version of the product, and users are advised to upgrade to the latest supported version (5.x).

On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, as well as F5 BIG-IP APM Clients 7.x versions prior to 7.2.1.5, a DLL Hijacking vulnerability exists in the BIG-IP Edge Client Windows Installer. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

Trend Micro HouseCall for Home Networks version 5.3.1302 and below contains an uncontrolled search patch element vulnerability that could allow an attacker with low user privileges to create a malicious DLL that could lead to escalated privileges.

Untrusted search path vulnerability in AttacheCase ver.3.6.1.0 and earlier allows an attacker to gain privileges and execute arbitrary code via a Trojan horse DLL in an unspecified directory.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of AVEVA Edge 2020 SP2 Patch 0(4201.2111.1802.0000). User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of APP files. The process loads a library from an unsecured location. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-16257.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of AVEVA Edge 2020 SP2 Patch 0(4201.2111.1802.0000). User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of APP files. The process loads a library from an unsecured location. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-17201.

The installer of WPS Office Version 10.8.0.6186 insecurely load VERSION.DLL (or some other DLLs), allowing an attacker to execute arbitrary code with the privilege of the user invoking the installer.

The installer of WPS Office Version 10.8.0.5745 insecurely load shcore.dll, allowing an attacker to execute arbitrary code with the privilege of the user invoking the installer.

Substance3D - Modeler versions 1.22.0 and earlier are affected by an Uncontrolled Search Path Element vulnerability that could result in arbitrary code execution in the context of the current user. If the application uses an uncontrolled search path to locate critical resources such as programs, an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. Exploitation of this issue does not require user interaction.

Untrusted search path vulnerability in AttacheCase ver.4.0.2.7 and earlier allows an attacker to gain privileges and execute arbitrary code via a Trojan horse DLL in an unspecified directory.

It is possible to sideload a compromised DLL during the installation at elevated privilege.

The following Yokogawa Electric products contain insecure DLL loading issues. CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, and from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00.

If an attacker manages to trick a valid user into loading a malicious DLL, the attacker may be able to achieve code execution in Honeywell SoftMaster version 4.51 application’s context and permissions.

Naver Cloud Explorer Beta allows the attacker to execute arbitrary code as System privilege via malicious DLL injection.

The G-RAID 4/8 Software Utility setups for Windows were affected by a DLL hijacking vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the system user.

The Zoom Opener installer is downloaded by a user from the Launch meeting page, when attempting to join a meeting without having the Zoom Meeting Client installed. The Zoom Opener installer for Zoom Client for Meetings before version 5.10.3 and Zoom Rooms for Conference Room for Windows before version 5.10.3 are susceptible to a DLL injection attack. This vulnerability could be used to run arbitrary code on the victims host.

A DLL hijacking vulnerability Trend Micro HouseCall for Home Networks version 5.3.1063 and below could allow an attacker to use a malicious DLL to escalate privileges and perform arbitrary code execution. An attacker must already have user privileges on the machine to exploit this vulnerability.

fish is a command line shell. fish version 3.1.0 through version 3.3.1 is vulnerable to arbitrary code execution. git repositories can contain per-repository configuration that change the behavior of git, including running arbitrary commands. When using the default configuration of fish, changing to a directory automatically runs `git` commands in order to display information about the current repository in the prompt. If an attacker can convince a user to change their current directory into one controlled by the attacker, such as on a shared file system or extracted archive, fish will run arbitrary commands under the attacker's control. This problem has been fixed in fish 3.4.0. Note that running git in these directories, including using the git tab completion, remains a potential trigger for this issue. As a workaround, remove the `fish_git_prompt` function from the prompt.

Delta Electronics DIAEnergie (all versions prior to 1.8.02.004) are vulnerable to a DLL hijacking condition. When combined with the Incorrect Default Permissions vulnerability of 4.2.2 above, this makes it possible for an attacker to escalate privileges

A binary hijack in Orwell-Dev-Cpp v5.11 allows attackers to execute arbitrary code via a crafted .exe file.

Shenzhen Tencent TIM Windows client 3.0.0.21315 has a DLL hijacking vulnerability, which can be exploited by attackers to execute malicious code.

A maliciously crafted DLL file can be forced to read beyond allocated boundaries in Autodesk InfraWorks 2023, and 2021 when parsing the DLL files could lead to a resource injection vulnerability.

AutomationDirect DirectLOGIC has a DLL vulnerability in the install directory that may allow an attacker to execute code during the installation process. This issue affects: AutomationDirect C-more EA9 EA9-T6CL versions prior to 6.73; EA9-T6CL-R versions prior to 6.73; EA9-T7CL versions prior to 6.73; EA9-T7CL-R versions prior to 6.73; EA9-T8CL versions prior to 6.73; EA9-T10CL versions prior to 6.73; EA9-T10WCL versions prior to 6.73; EA9-T12CL versions prior to 6.73; EA9-T15CL versions prior to 6.73; EA9-RHMI versions prior to 6.73; EA9-PGMSW versions prior to 6.73;

A DLL search path vulnerability was reported in Lenovo PCManager prior to version 4.0.40.2175 that could allow privilege escalation.

Notepad++ versions 8.4.1 and before are vulnerable to DLL hijacking where an attacker can replace the vulnerable dll (UxTheme.dll) with his own dll and run arbitrary code in the context of Notepad++.

Local privilege escalation due to a DLL hijacking vulnerability. The following products are affected: Acronis Snap Deploy (Windows) before build 3640

There exists a path traversal vulnerability in the Android Google Search app. This is caused by the incorrect usage of uri.getLastPathSegment. A symbolic encoded string can bypass the path logic to get access to unintended directories. An attacker can manipulate paths that could lead to code execution on the device. We recommend upgrading beyond version 13.41

DLL hijacking vulnerability in Gear IconX PC Manager prior to version 2.1.220405.51 allows attacker to execute arbitrary code. The patch adds proper absolute path to prevent dll hijacking.

Uncontrolled search path element issue exists in SonicDICOM Media Viewer 2.3.2 and earlier, which may lead to insecurely loading Dynamic Link Libraries. As a result, arbitrary code may be executed with the privileges of the running application.

DLL hijacking vulnerability in Smart Switch PC prior to version 4.2.22022_4 allows attacker to execute abitrary code.

DLL hijacking vulnerability in Kies prior to version 2.6.4.22014_2 allows attacker to execute abitrary code.

The seafile-client client 7.0.8 for Seafile is vulnerable to DLL hijacking because it loads exchndl.dll from the current working directory.