PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In versions prior to and including 2.12.1 a stack buffer overflow vulnerability affects PJSIP users that use STUN in their applications, either by: setting a STUN server in their account/media config in PJSUA/PJSUA2 level, or directly using `pjlib-util/stun_simple` API. A patch is available in commit 450baca which should be included in the next release. There are no known workarounds for this issue.

PJSIP is a free and open source multimedia communication library written in C language. In versions prior to and including 2.12 PJSIP there is a stack-buffer overflow vulnerability which only impacts PJSIP users who accept hashed digest credentials (credentials with data_type `PJSIP_CRED_DATA_DIGEST`). This issue has been patched in the master branch of the PJSIP repository and will be included with the next release. Users unable to upgrade need to check that the hashed digest data length must be equal to `PJSIP_MD5STRLEN` before passing to PJSIP.

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In affected versions if the incoming STUN message contains an ERROR-CODE attribute, the header length is not checked before performing a subtraction operation, potentially resulting in an integer underflow scenario. This issue affects all users that use STUN. A malicious actor located within the victim’s network may forge and send a specially crafted UDP (STUN) message that could remotely execute arbitrary code on the victim’s machine. Users are advised to upgrade as soon as possible. There are no known workarounds.

PJSIP is a free and open source multimedia communication library written in C with high level API in C, C++, Java, C#, and Python languages. SRTP is a higher level media transport which is stacked upon a lower level media transport such as UDP and ICE. Currently a higher level transport is not synchronized with its lower level transport that may introduce use-after-free issue. This vulnerability affects applications that have SRTP capability (`PJMEDIA_HAS_SRTP` is set) and use underlying media transport other than UDP. This vulnerability’s impact may range from unexpected application termination to control flow hijack/memory corruption. The patch is available as a commit in the master branch.

PJSIP is a free and open source multimedia communication library written in C. PJSIP versions 2.12 and prior do not parse incoming RTCP feedback RPSI (Reference Picture Selection Indication) packet, but any app that directly uses pjmedia_rtcp_fb_parse_rpsi() will be affected. A patch is available in the `master` branch of the `pjsip/pjproject` GitHub repository. There are currently no known workarounds.

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In versions up to and including 2.11.1 when in a dialog set (or forking) scenario, a hash key shared by multiple UAC dialogs can potentially be prematurely freed when one of the dialogs is destroyed . The issue may cause a dialog set to be registered in the hash table multiple times (with different hash keys) leading to undefined behavior such as dialog list collision which eventually leading to endless loop. A patch is available in commit db3235953baa56d2fb0e276ca510fefca751643f which will be included in the next release. There are no known workarounds for this issue.

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. This issue is similar to GHSA-9pfh-r8x4-w26w. Possible buffer overread when parsing a certain STUN message. The vulnerability affects applications that uses STUN including PJNATH and PJSUA-LIB. The patch is available as commit in the master branch.

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. Buffer overread is possible when parsing a specially crafted STUN message with unknown attribute. The vulnerability affects applications that uses STUN including PJNATH and PJSUA-LIB. The patch is available as a commit in the master branch (2.13.1).

PJSIP is a free and open source multimedia communication library written in C. Versions 2.12 and prior contain a stack buffer overflow vulnerability that affects PJSUA2 users or users that call the API `pjmedia_sdp_print(), pjmedia_sdp_media_print()`. Applications that do not use PJSUA2 and do not directly call `pjmedia_sdp_print()` or `pjmedia_sdp_media_print()` should not be affected. A patch is available on the `master` branch of the `pjsip/pjproject` GitHub repository. There are currently no known workarounds.

PJSIP is a free and open source multimedia communication library written in C. A buffer overflow vulnerability in versions 2.13 and prior affects applications that use PJSIP DNS resolver. It doesn't affect PJSIP users who do not utilise PJSIP DNS resolver. This vulnerability is related to CVE-2022-24793. The difference is that this issue is in parsing the query record `parse_query()`, while the issue in CVE-2022-24793 is in `parse_rr()`. A patch is available as commit `d1c5e4d` in the `master` branch. A workaround is to disable DNS resolution in PJSIP config (by setting `nameserver_count` to zero) or use an external resolver implementation instead.

PJSIP is a free and open source multimedia communication library written in C. A buffer overflow vulnerability in versions 2.12 and prior affects applications that use PJSIP DNS resolution. It doesn't affect PJSIP users who utilize an external resolver. This vulnerability is related to CVE-2023-27585. The difference is that this issue is in parsing the query record `parse_rr()`, while the issue in CVE-2023-27585 is in `parse_query()`. A patch is available in the `master` branch of the `pjsip/pjproject` GitHub repository. A workaround is to disable DNS resolution in PJSIP config (by setting `nameserver_count` to zero) or use an external resolver instead.

H3C N12 V100R005 contains a buffer overflow vulnerability due to the lack of length verification in the 5G wireless network processing function. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands by sending a POST request to /bin/webs.

H3C N12 V100R005 contains a buffer overflow vulnerability due to the lack of length verification in the mac address editing function. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands by sending a POST request to /bin/webs.

H3C N12 V100R005 contains a buffer overflow vulnerability due to the lack of length verification in the 2.4G wireless network processing function. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands by sending a POST request to /bin/webs.

OpenImageIO v3.1.0.0dev was discovered to contain a heap overflow via the component /OpenImageIO/fmath.h.

D-Link DIR-822 Rev.Bx devices with firmware v.202KRb06 and older allow a buffer overflow via long MacAddress data in a /HNAP1/SetClientInfo HNAP protocol message, which is mishandled in /usr/sbin/udhcpd during reading of the /var/servd/LAN-1-udhcpd.conf file.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects DC112A before 1.0.0.52, R6400 before 1.0.1.68, RAX200 before 1.0.3.106, WNDR3400v3 before 1.0.1.38, XR300 before 1.0.3.68, R8500 before 1.0.2.144, RAX75 before 1.0.3.106, R8300 before 1.0.2.144, and RAX80 before 1.0.3.106.

D-LINK DI-8003 v16.07.26A1 was discovered to contain a buffer overflow via the ip parameter in the ip_position_asp function.

Tenda AC6 v2.0 v15.03.06.50 was discovered to contain a buffer overflow in the function 'fromSetSysTime.

gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4_CONN_MSG_LEN is not sufficient for a trailing '\0' character.

NETGEAR WNR2000v3 devices before 1.1.2.14, WNR2000v4 devices before 1.0.0.66, and WNR2000v5 devices before 1.0.0.42 allow authentication bypass and remote code execution via a buffer overflow that uses a parameter in the administration webapp. The NETGEAR ID is PSV-2016-0261.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.66, D6400 before 1.0.0.100, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.52, DGN2200v4 before 1.0.0.118, EAX80 before 1.0.1.64, R6250 before 1.0.4.48, R7000 before 1.0.11.110, R7100LG before 1.0.0.72, R7900 before 1.0.4.30, R7960P before 1.4.1.64, R8000 before 1.0.4.62, RAX200 before 1.0.3.106, RS400 before 1.5.1.80, XR300 before 1.0.3.68, R6400v2 before 1.0.4.106, R7000P before 1.3.2.132, R8000P before 1.4.1.64, RAX20 before 1.0.2.82, RAX45 before 1.0.2.82, RAX80 before 1.0.3.106, R6700v3 before 1.0.4.106, R6900P before 1.3.2.132, R7900P before 1.4.1.64, RAX15 before 1.0.2.82, RAX50 before 1.0.2.82, and RAX75 before 1.0.3.106.

Multiple models of the Uniview IP Camera (e.g., IPC_G6103 B6103.16.10.B25.201218, IPC_G61, IPC21, IPC23, IPC32, IPC36, IPC62, and IPC_HCMN) offer an undocumented UDP service on port 7788 that allows a remote unauthenticated attacker to overflow an internal buffer and achieve code execution. By using this buffer overflow, a remote attacker can start the telnetd service. This service has a hardcoded default username and password (root/123456). Although it has a restrictive shell, this can be easily bypassed via the built-in ECHO shell command.

Asus RT-AC68U <3.0.0.4.385.20633 and RT-AC5300 <3.0.0.4.384.82072 are affected by a buffer overflow in blocking_request.cgi.

The boa httpd of Trendnet TEW-820AP 1.01.B01 has a stack overflow vulnerability in /boafrm/formIPv6Addr, /boafrm/formIpv6Setup, /boafrm/formDnsv6. The reason is that the check of ipv6 address is not sufficient, which allows attackers to construct payloads for attacks.

Buffer Overflow vulnerability in Vigor2620/LTE200 3.9.8.9 and earlier and Vigor2860/2925 3.9.8 and earlier and Vigor2862/2926 3.9.9.5 and earlier and Vigor2133/2762/2832 3.9.9 and earlier and Vigor165/166 4.2.7 and earlier and Vigor2135/2765/2766 4.4.5.1 and earlier and Vigor2865/2866/2927 4.4.5.3 and earlier and Vigor2962/3910 4.3.2.8/4.4.3.1 and earlier and Vigor3912 4.3.6.1 and earlier allows a remote attacker to execute arbitrary code via the CGI parser's handling of the "Content-Length" header of HTTP POST requests.

Two Buffer Overflow vulnerabilities exists in T10 V2_Firmware V4.1.8cu.5207_B20210320 in the http_request_parse function when processing host data in the HTTP request process.

Contiki-NG is an open-source, cross-platform operating system for internet of things (IoT) devices. In versions 4.8 and prior, an out-of-bounds write can occur in the BLE L2CAP module of the Contiki-NG operating system. The network stack of Contiki-NG uses a global buffer (packetbuf) for processing of packets, with the size of PACKETBUF_SIZE. In particular, when using the BLE L2CAP module with the default configuration, the PACKETBUF_SIZE value becomes larger then the actual size of the packetbuf. When large packets are processed by the L2CAP module, a buffer overflow can therefore occur when copying the packet data to the packetbuf. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be worked around by applying the patch manually.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 via the /cloud_config/router_post/check_reset_pwd_verify_code interface.

Buffer Overflow vulnerability in SunBK201 umicat through v.0.3.2 and fixed in v.0.3.3 allows an attacker to execute arbitrary code via the power(uct_int_t x, uct_int_t n) in src/uct_upstream.c.

Extreme Networks IQ Engine before 10.6r1a, and through 10.6r4 before 10.6r5, has a buffer overflow. This issue arises from the ah_webui service, which listens on TCP port 3009 by default.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reset_pwd_veirfy_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

An issue was discovered in MBed OS 6.16.0. When parsing hci reports, the hci parsing software dynamically determines the length of a list of reports by reading a byte from an input stream. It then fetches the length of the first report, uses it to calculate the beginning of the second report, etc. In doing this, it tracks the largest report so it can later allocate a buffer that fits every individual report (but only one at a time). It does not, however, validate that these addresses are all contained within the buffer passed to hciEvtProcessLeExtAdvReport. It is then possible, though unlikely, that the buffer designated to hold the reports is allocated in such a way that one of these out-of-bounds length fields is contained within the new buffer. When the (n-1)th report is copied, it overwrites the length field of the nth report. This now corrupted length field is then used for a memcpy into the new buffer, which may lead to a buffer overflow.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in /cloud_config/cloud_device/info interface, which allows a malicious user to executee arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/reset_cloud_pwd feature, which allows malicous users to execute arbitrary code on the system via a crafted post request.

A buffer overflow in ecma_builtin_typedarray_prototype_filter() in JerryScript version fe3a5c0 allows an attacker to construct a fake object or a fake arraybuffer with unlimited size.

Possible buffer overflow in WLAN handler due to lack of validation of destination buffer size before copying into it in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8096, APQ8098, IPQ8074, MDM9206, MDM9207C, MDM9607, MSM8996, MSM8996AU, MSM8998, QCA6174A, QCA6574AU, QCA8081, QCA9377, QCA9379, QCA9886, QCS605, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SM6150, SM7150, SM8150, SXR1130

An issue was discovered in Trusted Firmware-M through 2.1.0. User provided (and controlled) mailbox messages contain a pointer to a list of input arguments (in_vec) and output arguments (out_vec). These list pointers are never validated. Each argument list contains a buffer pointer and a buffer length field. After a PSA call, the length of the output arguments behind the unchecked pointer is updated in mailbox_direct_reply, regardless of the call result. This allows an attacker to write anywhere in the secure firmware, which can be used to take over the control flow, leading to remote code execution (RCE).

Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in the stats-over-http plugin of Apache Traffic Server allows an attacker to overwrite memory. This issue affects Apache Traffic Server 9.1.0.

Buffer overflow in PJSUA API when calling pjsua_call_dump. An attacker-controlled 'buffer' argument may cause a buffer overflow, since supplying an output buffer smaller than 128 characters may overflow the output buffer, regardless of the 'maxlen' argument supplied

Buffer Overflow vulnerability in tvnviewer.exe of TightVNC Viewer allows a remote attacker to execute arbitrary instructions via a crafted FramebufferUpdate packet from a VNC server.

Broadcom Emulex HBA Manager/One Command Manager versions before 11.4.425.0 and 12.8.542.31, if not installed in Strictly Local Management mode, have a buffer overflow vulnerability in the remote firmware download feature that could allow remote unauthenticated users to perform various attacks. In non-secure mode, the user is unauthenticated.

Buffer overflow vulnerability in file ecma-builtin-array-prototype.c:909 in function ecma_builtin_array_prototype_object_slice in Jerryscript before commit e1ce7dd7271288be8c0c8136eea9107df73a8ce2 on Oct 20, 2021.

HP Color LaserJet Pro M280-M281 Multifunction Printer series (before v. 20190419), HP LaserJet Pro MFP M28-M31 Printer series (before v. 20190426) may have an IPP Parser potentially vulnerable to Buffer Overflow.

An issue was discovered on Samsung mobile devices with M(6.0) and N(7.x) software. There is a buffer overflow in tlc_server. The Samsung ID is SVE-2017-8888 (July 2017).

A remote buffer overflow vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.4.x: 6.4.4.8-4.2.4.17 and below; Aruba Instant 6.5.x: 6.5.4.16 and below; Aruba Instant 8.3.x: 8.3.0.12 and below; Aruba Instant 8.5.x: 8.5.0.6 and below; Aruba Instant 8.6.x: 8.6.0.2 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

In ACCEL-PPP (an implementation of PPTP/PPPoE/L2TP/SSTP), there is a buffer overflow when receiving an l2tp control packet ith an AVP which type is a string and no hidden flags, length set to less than 6. If your application is used in open networks or there are untrusted nodes in the network it is highly recommended to apply the patch. The problem was patched with commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b As a workaround changes of commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b can be applied to older versions.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D6220 before 1.0.0.68, D6400 before 1.0.0.102, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.54, EX7000 before 1.0.1.94, EX7500 before 1.0.0.72, R6250 before 1.0.4.48, R6300v2 before 1.0.4.52, R6400 before 1.0.1.70, R6400v2 before 1.0.4.102, R6700v3 before 1.0.4.102, R7000 before 1.0.11.116, R7100LG before 1.0.0.64, R7850 before 1.0.5.68, R7900 before 1.0.4.30, R7960P before 1.4.1.68, R8000 before 1.0.4.52, RAX200 before 1.0.2.88, RBS40V before 2.6.2.4, RS400 before 1.5.1.80, XR300 before 1.0.3.56, R7000P before 1.3.2.124, R8000P before 1.4.1.68, R8500 before 1.0.2.144, RAX80 before 1.0.3.102, R6900P before 1.3.2.124, R7900P before 1.4.1.68, R8300 before 1.0.2.144, RAX75 before 1.0.3.102, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RBK752 before 3.2.17.12, and RBK852 before 3.2.17.12.